Sound when Portege R830 is anchored and display lid is closed
I have a fairly new Toshiba Portege R830 laptop (PT321E-01E00YEN) who don't use speakers integrated if it is placed in a dock with the closed laptop screen or the microphone.
This causes problems when you try to work from only an external monitor, but when I flip the lid open, it works fine.
I am using a replication of port II (PA3916B) and once installed a month ago, all device etc drivers has been updated to the lasted available so I think that there is a software configuration option that just needs to check or disabling.
No one knows where that might be?
I test this on an another older duplicator that has been purchased for a R700-15R and have exactly the same problem, so I don't think it is hardware related.
Any help would be greatly appreciated :-)
Please don't get me wrong, but to me this behavious seems logical. When you close the lid internal speaker and microphone placed close to the cam are blocked so I don't know how you want to use.
When the laptop is closed and set aside, it's almost the same as the office. All devices that you need should be connected to the docking station and external devices.
If you use your laptop on a regular route, but they also appear external to office extension, you can use all the internal devices to your laptop.
In my opinion the point of berthing of the use of the station of different devices to your laptop, but using the docking station, you can remove the laptop and take it with you without disconnection of all connected devices, including the power supply.
To be honest, I see here no problem. You can contact Toshiba service nearest and ask for opinions, but I'm sure the answer will be the same.
Tags: Toshiba
Similar Questions
-
Portege R830 - updates BIOS and USB 3
Hi all
I have a Toshiba Portege R830, business management Windows 7 (SP1) 32-bit (for work).
I also start Linux Mint 14 64-bit, that I installed it on a portable USB HDD (non-professional).I recently bought a 3 USB HARD drive, but when I connect it to the USB 3 port on my R830, it gives me only USB 2 speeds (25 MB/s).
I checked with some diagnostic utilities (usbdeview, etc.), who say that the drive is connected in USB 2.1 mode.
The drive reports itself as being 3 USB, cable is USB 3 (SuperSpeed) and the port that I use on the R830 is 3.
I feel the same way, if I boot on windows or linux.
I've updated all the drivers on the two operating systems, does not.
then I tried to update the BIOS, but I get the following error:
"An error occurred during the preparation of the updated environment.
You have not given the permission to execute the update".For the record, it's the BIOS I'm leaving, & to.
BIOS version: Current Ver.2.80--> updated Ver.4.10
THIS Version: Current Ver.1.10--> update Ver.1.60Does anyone know why I wouldn't get USB 3 speed (which, for my drive, are expected to be around 40-50 MB/s), or why all the diagnostics say USB 2?
Does anyone know how to overcome the problem of updating the BIOS?
(I tried in safe mode, disable AV, disabling NX)See you soon
This USB driver is installed?
Please try to install it and check again speed USB.
-
No sound when using Firefox. ITunes and QuickTime work well
While surfing with Firefox, YouTube and other videos have no audio. ITunes and other audio programs work very well.
Your Firefox Plugins are quite old you need to upgrade.
-> Update all of your Firefox Plugins
- https://www-dev.allizom.org/en-us/pluginCheck/
- http://www.Mozilla.com/en-us/pluginCheck/
- During the installation of the Plugins download files hotfix, remove the check mark to download any other software options with your Plugins (for example, toolbars, McAfee, Google Chrome, etc.)
-> Restart Firefox
Also make the suggestions mentioned in the following article:
-> Cache and delete Cookies- https://support.Mozilla.com/en-us/KB/template:clearCookiesCache
- What to do if Firefox will play not all sounds
Check and tell if its working.
-
An unexpected error has occurred.
Click the node server reset to try to connect to the server againEvent type: error
Event source: Windows Server Update Services
Event category: no
Event ID: 7053
Date:
Time:
User: n/a
Computer:
Description: The WSUS administration console has encountered an unexpected error. Maybe it's a transient error; try to restart the administration console.
Cause
This can happen if the application cache is damaged.Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Thud becomes sound when opening certain Web sites.
original Web site security title: check a toolbar. Why "knocking" sound when checking for some sites and not others?
Check Web site security through toolbar. Why "knocking" sound when checking for some sites and not others?
Hello
1. what browser you use to access the Internet?
2. What are the sites on which you can hear this thud?
3 did you changes to the security settings before the show?
4. what version of Internet Explorer is installed on the system?5. what exactly do you mean by "Check website security in the toolbar?
Click on the link below and check if it helps to resolve the issue.
Note:
Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings -
Satellite don't wake up from sleep or hibernation when the lid is closed
It is a problem that I had with my laptop from the outset - if the laptop is in sleep or Hibernate mode and the lid is closed, or the lid is closed and will switch "standby" from there, it won't wake up or respond to the switch once again opened.
Even holding down the power button has no effect, the only way to turn it back on is to remove the battery, put it back and turn the phone back on, lose anything I had opened.
I fear that the laptop could be damaged by this, but there is no other way.
This isn't a problem with the settings of windows, I had the same problem with the function suspends in ubuntu.Anyone had similar problems or know anything than either could have caused this?
What model of Satellite L do you have exactly?
What system is pre-installed? Have you tested this problem with laptop recovery fees?BIOS is up to date? If it is not updated in the BIOS.
After update BIOS, set the default BIOS and test the features of the laptop.Your comments would be appreciated
-
Portege R830 had dead blue when the screen connects to wifi or shared internet
It seemed began as soon as the automatic update from Microsoft on Qualcomm, Atheros, every time when connect to any WIFi, share internet, my portege R830 shows blue screen and the following error message:
unhandled system_thread_exception (athwb.sys)I found that I am not the isolated on the Web site. I tried to remove and stop updates. However, once I connect to the internet, the blue screen comes back.
Is the problem because of the network adapter? The model is Qualcomm Atheros AR9002WB
Can solve the problem if I download the new driver of Qualcomm-Atheros site? Or if I replace a new adapter?The athwb.sys file belongs to the Atheros wireless driver. Usually placed in C:\Windows\System32\drivers\athwb.sys
It seems that in your case this file causing the BSOD.I found a very interesting detail about this problem and why it seems.
A user wrote:
{quote} The issue is due to a database hosted on Linux kernel mapped NAS drives and if the Client for NFS is installed on the windows machine. For some reason, this configuration does not work. If you mount your shares and NFS is installed it tries to use the NFS client and fails miserably. Trick is to disassemble all the shares of logging in Safe Mode and then rebooted and uninstall the NFS client and then mount your shares. {quote} -
When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse. How can I get the pen tool to release the anchor
Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.
-
When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help
Command-r does not work on a 10.6.8 system, you would need 10.7 Lion or better to do. If you try to install a new system and that you have already downloaded, then go to your Applications folder and double-click "install OS X...". »
-
IM using windows 7 on a computer toshiba laptop. Tools, options, read and display, settings do not seem to
to take effect.kasbr
And your via IMAP and read your mail on another device and the State is synchronizing. Although some phones I understand making mail as read when you download it.
-
In the old version of Firefox, when I opened a new tab, firefox remember and displays previous tabs open when I click on the + to the new tab. This display last has shown several places I visited and I could automatically click it to bring up this last point of view. In this function, I could go to one of my last 6 views quite easily and make it appear one of them as a shortcut.
Try:
-
We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.
Thank you so much: D
ON both phones, check the settings > phone > call on other devices > Off.
-
Satellite A500: problem with the driver of sound and display after update!
A500 Windows 7-64 bit
I download the latest driver (6.0.1.6048) sound and display driver (8.16.11.8973) and I have a few problems.
The colors are too bright and the sound is too deep (as the middle are too low).Hello
Then why you n t go back to earlier versions of the driver?
In your case, I would recommend setting the operating system at the point of time at first, until you have updated the drivers.
Usually, this should help to recover the old drivers again.Welcome them
-
When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help
The solution is here:
-
I recently had a new hard drive installed; now when I open my pictures folder and display their (in any view-film, thumbnails etc.) photos have a 'white' on the region, and I don't see the whole picture.
Hi AnnEdelstein,To resolve this problem, install the latest version of the video card driver.Contact your video hardware manufacturer to find out how to obtain and install the latest version of the video driver for your video device.To see if applicable driver updates are available, visit the Microsoft Windows Update Web site at the following address:More information on:
How to manage devices in Windows XP
Keep me updated on the status of the issue.
Maybe you are looking for
-
How can I sync lightning with the iphone calendar?
How can I sync lightning with the iphone calendar? I saw online that I need to use a google calendar? I added google calendar as they described, but I have no idea where from here
-
I found a large detachment (M277dw - drawer Toner at corner), and I stopped by Office Depot and looked at their floor model. Their floor model tray down (gravity only) and the blue lever allows the toner tray slide. My device behavior is different.
-
Considered system 2A & b... I need write access to the Program Files directory of computer remote (B) (a)... trying to create a file or folder.using command line.
-
Hello! Background: My company uses a BBs. But there is a lot of new devices from BB, we always 9900ers. My question is: if I want to exscape the stoneage my BUSINESS (no ofense 9900) and I get a Q10 for example, could I still use it with the same ser
-
I want to install SP1 for FSX, but it says this (C:\Users\Home\Downloads\fsx_sp1_ENU.exe is not a valid Win32 application) What should I do to install it?