source of the error loading maps

Similar Questions

• Error message of Microsoft Visual C++ Runtime Library without program listed as the source of the error.

  I have a Microsoft Visual C++ Runtime Library error message, but no program is listed as the source of the error... the only entry is "program: C:\...» ».   I am running XP Service Pack 3 on a HP Mini.  HP support center suggests that a driver is not loaded, or is corrupt and suggests also that I have to reinstall the program.  It is impossible, however, if the program in question cannot be determined.  Any advice?

  What is your system brand and model (mini HP something)?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  If the system works, what do you think might have changed since the last time it did not work properly?

  When is it and what you do when you see this message?

  You see it every time the system starts or when you try to start a program?

  There may be some clues in the event where log Viewer, but has first:

  Microsoft offers several different versions of the Microsoft Visual C++ distributables.

  For their need for some of your applications or make install does not mean that you will make any C++ programming, but some applications need some of the runtime components and libraries installed with just distribution C++ files (it is not the whole development package).

  It is also possible to have multiple versions of the distributables C++ installed on your system - I installed 7, but you do not have to many.  Different programs that you install may require different sets of files to work.

  Take a look in Add/Remove programs and see what, if any, versions of Microsoft C++ Redistributables you have installed right now.

  The latest version is the version of Microsoft Visual C++ 2010, so if you don't have that, I would start by download and install from here:

  http://www.Microsoft.com/download/en/details.aspx?ID=8328 (this is the 32-bit version)

  If you see already that you have version 2010 installed in Add/Remove Programs, just uninstall it, reboot and reinstall it from the download, then view the side of things.

  Always restart after installing new software because that will eliminate the stupid question "did you restart your system" could happen later...

• Join the error in mapping!

  Hello
  
  I have 4 source tables and table a target. While the mapping of the source to the target table, I get following error:
  
  
  Review: Default data set     All stores data in a dataset must be attached. This data set has several sets of storage of data source disconnected. The sets are: [src1, src2, src3, src4]. To design a Cartesian product, create a join and select join cross in its properties.     
  
  Because of this error flow chart cannot be created and showing the error message.
  
  Can someone tell me what exactly I have to do to make this work?
  
  Thank you
  Shri

  If you need a Cartesian join between the tables, you must put a cross join. ODI is in need of a join (normal join or cross join) between all of the tables that you put in an interface.

• I'm having a problem with my Adobe. The name of the error loading error. I have to update

  I'm going to un problem with my Adobe. Name of the error, it is load- error. I have to be Update page to see the videos. Someone could help me

  Hi Penelope.

  See the FAQ below for links to the latest version of Flash Player:

  Where can I find direct downloads of Flash Player 11 for Windows or Macintosh?

  Thank you

  Chris

• Analyze the error loading 'Inbox '.

  After you have added a new (existing) email '[email protected]' in Thunderbird, I notice that a mailbox is generated (Trash is not visible in the left pane).
  On navigation in the Inbox for this account, I get the error message: "the current operation on"Inbox"has failed. The e-mail server for the account [email protected] replied: Parse error: bad character. ' EXPECTED ' ' but I got '% "".

  The connection for this email password works fine when I log on the account directly through Hughesnet.com with my Firefox browser.

  How can I fix this fatal?

  update the addons and mail account now works. Don't know why, but the final, but the end result is all I need.
  PROBLEM SOLVED

• The ERPi load mapping file for data import error

  Hello

  
  

  I am creating the ERPi mapping and download of mapping for a dimension via a file. It gives an error. I use the explicit mapping. Please help me with this. Error screenshot is attached.

  Hello Asad,

  Create a unique mapping using the FDM web application and then export the map that you just created and it will show the required format

  Rgds,

  SH

• Get the error loading file csv to oracle table

  Hello

  I'm tryitng to load the csv file into oracle db table.

  Source:

  CSV file have account_numbers, customer_names. all the fields, it took as channel.

  Target: Oracle db

  If I took all the fields as varchar, it loads very well. but I want to

  Oracle table fields: digital account numbers or decimal (20.2)

  customer_names as varchar2 format.

  When I'm trying to load csv to oracle table, I am getting following error.

  

  ODI-1228: fgh1 (integration) task fails on the target odi_user1 ORACLE connection.

  Caused by: java.sql.SQLSyntaxErrorException: ORA-01722: invalid number

  I tried so many times. I am still getting error.

  TO_NUMBER function I also used, getting same error

  Please help me,

  Thank you and best regards,

  A.Kavya.

  Hi, String, CSV file data type have values of amount a 54,356,4657.89 format. Like this. In odi, I took number (30.2) of data types for the target table. When I traced in odi, I get error like invalid number. to do this, I changed the values in csv file format. I removed commas. for example, 543564657.89. Yet once, I traced csv to oracle in odi. executd successfully. Thanks & regards, A.kavya.

• my laptop does not start and gives me the error, load the required DLLs for kernal

  When I went to start my computer would not start and just says load needed DLLs for kernal and communicate with my support. I don't know what the problem is or how to fix it. It was working fine when I finally stopped him. any help is greatly appreciated

  Hello

  Method 1: Please follow the steps mentioned in the article mentioned below:
  Error Messages When you start your computer if Program Files of Windows are missing or damaged:
  http://support.Microsoft.com/kb/812450

  Method 2: How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788
  Note: This could result in a loss of data on your computer; It is recommended that you back up all important data on the computer before performing this operation.

• Find the source of the massive compilation errors

  Hi all

  I am trying to determine the source of the errors on a generation of RT and therefore a massive to remove compilation live broken and unused running the project is important enough, so the output from compilation of mass is large.  One thing I am struggling with trying to determine * why * an error.  For example, I get a few CompileFile: error 7, which indicates that something is looking for a file that does not exist.  How can I determine which leader is the search for the missing file?  I've attached the output from the massive compilation, but also a python file that I use to interpret the files to find errors.

  On another note about this file - what I'm doing with the release of Bad VI/Subvi?  It almost seems as if he is allowed to disregard this output.

  Any help is welcome. At soon cirrus

  (okay, that I'm lame but you are not allowed to attach python so here is the script below)

  FName = "mass_compile_log_10202016.txt."
  
  with open (fname) as f:
  
      line = f.readline () .strip)
  
      I = 0 # track the error number
  
      j = 0 # track the line number
  
      # Only goes to find the first 30 records
  
      <>
  
          s = line [0:3]
  
          j += 1
  
  # Not interested in a failure to load, search or bad messages VI...
  
          otherwise (s == ' # ' or s == 'ISP' or s == 'Sea' or s == "(C:"):
  
              I += 1 # increment the error
  
              Print (STR (i) + "[" + str (j) + ' "].") + line)
  
          line = f.readline () .strip)
  
      f.Close)

  Thank you, udka.

  In fact, I came across the easy solution (although there is always only one instance dangling out there that I can't explain).  Simply

  1. Create a new project
  2. Add a snapshot of the file you want to compile mass

  If you lack the screws in the massive compilation, these will appear in the missing build dependencies and you can know who is dependent on them.

  About the wrong screw - it is difficult to know if this could be due to the fact that the compilation of mass occurs on local and he can't find the RT del VI (since it is not on the RT system).  Whatever it is, I'm building again to see if I have an exe works on the RT system (the reason why I was making the massive compilation has been a failure on the exe - not when you build, but when running).  I have attached my log of recent massive compilation for the comparison of what I started with.

• Error loading operating system message is displayed after the partial installation of Windows XP

  Hello all, I was doing a clean install of Windows XP from the CD on my desktop PC.  I had reached the point where I had deleted the existing system partition and created a new system partition and had begun to load data from system to system on the CD when I accidentally stop the surge protector, shutting off the power to the computer, the screen of the monitor, etc.  After that I restored power, I turned on the PC without the XP installation CD in the CD/DVD drive.  The system posted successfully and start the CD line appeared IMMEDIATELY followed by the message "error loading operating system" on a new line.  I tried to start with the installation of XP in the drive disc, as well as with the "Ultimate Boot CD" in the player - the "Error loading operating system" message appeared in both cases.  Thanks for any help you can provide!

  The desktop PC has had a full legal work Windows XP with SP3, but I chose to reinstall from scratch, because I had problems with corrupted data in the Zone Alarm and card ATI graphics card software that caused random outages, lead to situations of re - start.  I couldn't fix the files for these 2 applications that I had this desktop PC in stock for more than 18 months and I couldn't remember the administrator password I had used.

  Once more, these error messages tell me you dΘmarrez the hard disk and no CD-ROM drive.  The message "NTLDR is missing" is read the boot sector, on most of the installations of Windows, the boot sector is usually the absolute sector 63 on the disc, using DiskProbe you will see the text of the message to the given sector.

  Your drive is perhaps at fault... or it may be absolutely nothing wrong with it!  You may need to press a key to boot from the CD, often you see a message like «Press any key to boot from CD...» "or some thing in this sense, maybe you're not a touch and the BIOS ignores the boot from CD-ROM and goes to the next boot device (hard drive).

  John

• Express dialogue VI file modifies the error string

  Hello

  today I got a strange error message form the express VI of the file dialog box (with the name of the new folder dialog box):

  1055 error has occurred in the new folder dialog box-> check if the directory exists.vi-> configure the directory path.vi-> load PS config-> program.vi Triax file.vi

  Possible reasons:

  LabVIEW: Object Reference is not valid.

  After some research, I discovered, that VI is not the source of the error, it has just changed the information received from the error in terminal.

  Is this a known problem in Labview 2011? I have not found anything.

  The expressway screws work is that they generate a real VI that will be executed whenever you change the configuration and that VI is saved as part of the VI call. You can watch the VI generated by VI right-clicking and selecting Open the front panel, which will be asked if you want to convert. If you do this and look inside the real VI she calls, you will see that it performs an unconditional call for a VI that modifies the error string. I would say this call should probably not do if it the error was true, then I would call it a bug.

  In practice, I'd say the best option is to call the primitive file of dialogue yourself or call errors to merge and put the initial mistake of wire on top or wrap all express VI into a case of error structure.

• Error loading operating system

  Hello

  Today my computer crash with the following error

  stop: 0xe000008e (oxe0000001, oxae313925, oxa3cd26f8, 0x000000

  Watchdog sys address ae313925 baseae3130000date stamp 48025yab

  so I restarted and now I get the error loading operating system

  I use a computer I built myself... I'm not a person irritable, I build them, but cannot fix them :(

  I have win xp sp3

  WD 400 GB hd

  2 GB memory

  card mother MSI p45 neo, with the latest version of the bios updated

  I also have a disk external wd 500 GB fixed

  I've seen on several different sites that I use the xp disc and repair.

  I have a win 7 cd I want to upgrade

  is there a way I can get software thati product codes have a setup that I don't have the disc or product key for

  from my pc or is it toolate

  OK in safe mode on admin, I got this after having typed sfc /scan now

  Windows file protection could not initiate a scan of protected system files

  the specific error code is 0x000006ba [the RPC server is unavailable

  Insert the installation CD before running the above command. If the installation path have changed since the initial installation, then you have to modify the source pathfor SFC can find the installation files.

  http://smallvoid.com/article/Winnt-SFC.html

  Have you implemented the resolutions contained in this document?

  http://support.Microsoft.com/kb/296241

  Try to apply the advice of the great system-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/SFC-Windows-file-protection-could-not-initiate-a/d871c1ad-0B96-4403-aa1f-086fe6403b28

• Resample IMAQ generates the error-1074396157

  Hi all

  While he was trying to use IMAQ resample labview VI 2014, I get code error-1074396157, with the source of the error being "imaq resample. Everyone knows this? What is going on?

  Thank you

  Soheyl

  According to the help of LabVIEW, 1074396157 error code has the following possible reasons:

  IMAQ Vision: Unauthorized copying of Vision of NOR.

  The solution is to put the licensed software.  IMAQ and the Vision Development Module require an additional permission beyond LabVIEW base.

  Bob Schor

• Error loading lvdaq.dll

  Hello forum of Discussion of LabView.

  I am currently using LabView 2009. My Research Director has tried to open the files inherited from Labview 7.1 on the more modern version, without success. After doing a little research, I found that I had to download traditional DAQ in order to get the latest version of LabView to open the older file. First, I downloaded the DAQ for 7.4.1 and installed with setup.exe, after which I tried to open the program. I got the «error loading lvdaq.dll...» Error in initialization failed". I then downloaded 7.4.4, thinking that maybe it would be a better version. Same mistake. I'm now downloading version 7.1 (a previous DAQ inherited), thinking that maybe the version numbers should equal to the origin of the old Legacy DAQ file I have to run it. I hope that it will work (and if that's the case I'll just delete my post), however if it isn't, I'll update my post and I hope to help to know what to do.

  Thank you in advance for any help.

  
  

• "Error loading operating system" after windows update

  I have an ASUS EeePc netbook model: 1005PEB. Last night before going to bed, I stopped the netbook and it has begun to install and configure windows was last updated. I left on the office do its thing and went to bed. This morning, I got the netbook and it went out of the car and it turned on while I was about to leave the House (before ask you, no I ' was not flying). He started installing all the updates that it had installed the night before. It has gotten to the point where it installed the last element and hung up there. I leave a this screen for 45 minutes and nothing has changed. I went against my better judgment and off the netbook. When I went immediately to turn it back on all I get is "error loading operating system". I tried to use F8 to try to start it in safe mode and I can always access the BIOS. How do I get this service still? I don't have really any data here, I'm too preoccupied. Thanks for any help anyone can offer.

  Hi argyle_83,

  Were you able to boot into safe mode?

  This problem can occur if your computer's BIOS does not correctly manage or support the capacity of the hard disk on which you install Windows 7. You can try the steps below to resolve this issue.

  Method 1: Obtain the latest BIOS updates

  WARNING: This article contains steps that may involve changing your BIOS or parameters of semiconductor (CMOS) to complementary metal oxide, or that may require you to make physical changes to your computer hardware. Incorrect changes to the BIOS of your computer may cause serious problems. Microsoft cannot guarantee that problems resulting from changes to your BIOS can be solved.

  Your first step to solve the problem of the error loading operating system should be updated to your computer BIOS.

  Contact the computer manufacturer to find out how to obtain and install the latest available for the computer BIOS update.

  Find information of BIOS on your Netbook from this link.
   
  http://support.ASUS.com/download/download.aspx

  Here are answers to some common questions on the basis of input/output system (BIOS).

  BIOS: Frequently asked questions

  Method 2: Run the Startup Repair

   

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting.

  Refer to this article for more details.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.