SPA3102 CID has not managed to asterisk

Similar Questions

• When I press on trying to download photoshop cc at 42%, it is said that he has not managed to download every time I try to download

  When I press on trying to download photoshop cc at 42%, it is said that he has not managed to download every time I try to download

  Orbital ZiLe for more information on how to resolve errors download please see error download and installation of the creative cloud application.

• ASA Cisco IPSEC VPN tunnel has not managed the traffic

  Hi guys

  I am trying to set up a new connection IPSEC VPN between a Cisco ASA 5520 (verion 8.4 (4)) and Checkpoint Firewall. I managed to establish the phases IKE and IPSEC and I can see the tunnel is UP. But I can't see any traffic through the tunnel. I checked the cryptomap both ends and try to test with a contionuous ping from within the network of the SAA.

  I made a screenshot of ICMP packets but cannot see in ASA. I welcomed the icmp inside ASA interface.

  I did a package tracer and it ends with a fall of vpn - filter the packets. But can not see any configured filters...

  Your help is very appreciated...

  Thank you

  You probably need to add nat negate statements:-something like.

  object-group network OBJ-LOCAL
  Network 10.155.176.0 255.255.255.0
  object-group network OBJ / remote
  object-network 192.168.101.0 255.255.255.0
  NAT static OBJ-LOCALOBJ-LOCAL source destination (indoor, outdoor) static OBJ-REMOTE OBJ-REMOTE-no-proxy-arp

  You are running 8.4 nat 0 has been amortized

• WES610N has not managed a DHCP requests of beneficiaries to E3000?

  I can not get my WES610N to transmit DHCP requests via wireless to my E3000 router.

  If I connect physically E3000-> WES610N-> laptop, it'll pass the DHCP request and get network access to the laptop.

  As soon as I use the WAP as provided for in my media center with Wireless between E3000-> WES610N a wired connection between WES610N-> mobile/XBOX/PS3 none of the DHCP requests are passed along, and no access to the network is provided.  The wireless signal remains strong to WAP, and I show the client wireless and assigned address DHCP at the end of the router.

  I am running the latest firmware to factory on the E3000 (tried DD - WRT with no luck).  Wireless security is WPA2-Personal with AES and a MAC filter to allow only a list of wireless clients.  Run auto-channel and connected to the 5 GHz signal.  I even tried to add MAC addresses to filter for customers physically connected to WAP with no luck.

  Is there something I'm missing here, or is this a common problem?

  Thanks in advance for any help!

  Of course, it was something simple that fixed...  I had checked the firmware on the router was in effect, but for some reason any it never came to mind to check the firmware on the bridge itself.

  I received a chat session with the help of Cisco and they gave me the link for the updated for the WES610N and the WET610N firmware.  After a re-flash all my current configurations for network addresses, authentication and appointing remain - so all I had to do was to remove the wired connection to router at the bridge (which was required to connect and perform the flash) and give it a try.

  Initially, with the bridge still sitting next to the router it would drop and re - connect about every 20 seconds, an improvement, but still not acceptable.  As soon as I moved it 10 + feet away from the router (as shown) the connection remained strong and is more randomly disconnected.  The final resting place has been to my media center, which is about 30 feet more far laterally and down a level in my house.

  After flash it now connects quickly, successfully passes DHCP queries on multiple devices, successfully conducts tests of speed/transfer and does not abandon the connection only once during a few hours of play.  The speeds are always disappointing, maxing out at about 70 MB/s on wirelessN - but that's a lot for streaming media and ~ 2 x more than my cable internet service can pull down.

  Anyway, here is the link to the firmware if you are still with me after this long explanation:

  http://homedownloads.Cisco.com/downloads/firmware/1224668058222/FW_WES610N_WET610N_1.0.05.004_201108...

• ESW-520-24 P has not managed the custom VIRTUAL local network traffic

  Hi all

  We recently bought a switch ESW-520-24 p to replace a CE500 end-of-life.  The facility where the switch is installed has access wireless connected to the VLAN 110 points.

  Course the ESW-520-24 p switch does not support VTP so none VLAN is to be propagated to it.  So I created 110 VLAN manually and ports assigned to him.  But the devices on ports communicate with anything.

  All ports are configured as access with 110 ports VLAN not identified.  The uplink is the g2 port which is in binding mode.

  Can someone please tell me what I can have configured wrong?

  Thank you

  -Steve

  Hi Steve,.

  If it is for UC500 installation, the default configuration on the ESW is normally perfect and the switch has to be turned on.

  Otherwise that looks like you have made the correct things.

  I guess VLAN1 is always present on the ESW switch, but excluded by access ports...

  All ports are not marked in VLAN110 except for the uplink, given that the packages of vlan tagged while waiting to switch receiver VLAN110 or unmarked packages?  (something to think quickly)

  But the result is if you are still in a stalemate, why not call the Small Business Support Center, the switch is probably still under warranty and telephone support.

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

  Best regards, Dave

• IPN has not managed the traffic

  I deployed an IPN for the VPN user contributions posture. Right now I have no control of posture enabled and I leave with a past "all permit" list DACL, but I can not pass traffic (no ping from the VPN client to an internal resource).

  For the heck of it I put a subnet filter for my VPN hen on the IPN and then I get ping, while it makes me think the routing is all good, must be the right of the IPN?

  Any ideas?

  Thank you!

  The IPN can you issue a "session of pep show table? You should see the ip address of the client. If jot check tunnel group to see if the accounting server group and the Group of authentication servers point to the node of the ipn. Also, make sure that you hit the permission node online profile.

  Sent by Cisco Support technique Android app

• SQL query problem - (internal has not managed to the outer query)

  Hi all:
  
  Here is my SQL query:
  

  SELECT RD.SITE,
    ROUND(
    (SELECT COUNT (DISTINCT PB.EMP_ID)
    FROM BOOK PB
    WHERE PB.EMP_ID IN
      (SELECT PB.EMP_ID FROM BOOK PB
      )
    ) /
    (SELECT COUNT (DISTINCT PB.EMP_ID)
    FROM BOOK PB
    WHERE PB.EMP_ID IN
      (SELECT PB.EMP_ID FROM BOOK PB
  WHERE MO.QUALIFIER > 4
      )
    )* 100, 2) AS PERCENTAGE
  FROM BOOK PB
  LEFT JOIN POSITION MO
  ON PB.EMP_ID = PO.EMP_ID
  INNER JOIN PHYS_LOCATION RD
  ON MO.HOUSED         = RD.SITE_ID
  WHERE MO.ACTUAL_END IS NULL
  GROUP BY RD.SITE;

  Why am I the overall percentage of all Sites as opposed to each percentage calculation for each site. I've grouped by Rd. SITE, so I assume he would calculate the percentages for each site. What I've done wrong?
  
  Thank you for your help.

  AquaNX4 wrote:
  Hi all:

  Here is my SQL query:

  SELECT RD.SITE,
  ROUND(
  (SELECT COUNT (DISTINCT PB.EMP_ID)
  FROM BOOK PB
  WHERE PB.EMP_ID IN
  (SELECT PB.EMP_ID FROM BOOK PB
  )
  ) /
  (SELECT COUNT (DISTINCT PB.EMP_ID)
  FROM BOOK PB
  WHERE PB.EMP_ID IN
  (SELECT PB.EMP_ID FROM BOOK PB
  WHERE MO.QUALIFIER > 4
  )
  )* 100, 2) AS PERCENTAGE
  FROM BOOK PB
  LEFT JOIN POSITION MO
  ON PB.EMP_ID = PO.EMP_ID
  INNER JOIN PHYS_LOCATION RD
  ON MO.HOUSED         = RD.SITE_ID
  WHERE MO.ACTUAL_END IS NULL
  GROUP BY RD.SITE;
  

  Why am I the overall percentage of all Sites as opposed to each percentage calculation for each site. I've grouped by Rd. SITE, so I assume he would calculate the percentages for each site. What I've done wrong?

  It's what you're asking. Your subquery scalar to get the percentage is not restricted by the current site. Add columns to filter to restrict the values selected for the calculation

  Published by: riedelme on May 8, 2013 07:26

• SRA order "matrices of discovery has not not" adv0408 file not found in VMware Site Recovery Manager.

  Hi all

  Can we add several table managers at sites in VMware SRM?

  How to record several managers of the group a table copy in SRA?

  "When I try to add new array manager of second table at one site I get the error message" SRA order "matrices of discovery has not not" adv0408 file not found in VMware Site recovery manager.

  Versions: VMware SRM 5.5

  Cruiser storage: Fujitsu Eternus SF v16.1, SRA 2.3

  Thanks in advance,

  RAMU Reddy

  [email protected]

  Thanks Stefan,

  I contacted my storage team. It was with License Manager (ACM) advanced copy number. After license ACM registry in SRA Database of SRM server, everything was fine and I was able to protect all remaining VM.

  Best regards

  RAMU Reddy

• You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500

  You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500 contacts that I have that are in other contacts.

  Hi robertsjohn125,
  Contacts are not supported in Firefox, unless you take on Firefox Desktop and Hello of Firefox?

  Where to manage your contacts, this might help to direct you to the correct support.

• I followed the instructions for "Go Thunderbird data to a new computer," but the calendar data has not been transferred and the calendar program does not work.

  I manually moved my profile of Thunderbird in Ubuntu 12.04 LTS to 8.1 Windows. I followed the instructions and everything settled as expected except the calendar. Not only the calendar data has not been transferred, the calendar itself does not, for example no dates & everyday of the week, etc., all the menus associated with the calendar are "grey," etc. I'd appreciate any help. TIA KellyJMorris

  Calendar (aka Lightning) contains binary components, which are dependent on OS. Thus, you should not remove the add-on lightning in your add-ons Manager and install the Windows version of lightning.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/

• Best way to check my Mac has not been hacked?

  Have an end 2012 27 "iMac, OS X 10.9.5, 3.4 GHz Intel Core i7, 16 GB 1600 MHZ DDR3 & have no idea what that means I'm technically disadvantaged. I get e-mails, mainly from some places that I buy, like Sears, Best Buy, etc., that contain strange characters & symbols in the welcome message that I do not open. I talked to the Geek Squad at best buy and was informed that a person may have gotten in my computer. No no proposed solution. Last month, my credit card has been hacked. I'm trying to find out if there is a connection. What should I do to make sure that my computer has not been violated & is always so sure that Apple can do in these difficult times.

  Thank you, Roger

  As usual, the Geek Squad is incorrect. If you get suspicious emails then contact your provider of Internet Service (ISP) and ask for help. If you tend to use the same password for many of your accounts, including your email address and it is fairly easy to understand, then consider changing to a password is more enigmatic, something like * $Merp78@#. A good thing to do is to create separate passwords for each account, and then use a tool such as 1Password to manage all your passwords.

  Whatever you do, NEVER install any antivirus, cleaning or any other third party on your Mac maintenance utility. Not only are they 100% worthless they can create havoc for OS X users. If you currently have one of these types of utilities installed please uninstall immediately in accordance with the instructions of developers.

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Firefox has not today and not reinstall or run somehow

  FF stopped working entirely. I have uninsalled 14.0.1 13 and reinstalled. Who has not solved the problem. I get msg that FF is already running, but it is not running and does not appear in the Manager of tasks as an active process. Scan of the machine for viruses using PrevX shows a clean machine. I tried many ideas in this support website but am limited since I don't have the ability to run the FF. Discount file read-only to read profiles not only did not hold as whenever I checked the properties of the profiles folder always it will reset read-only.

  The problem seems to be with Prevx. Set Prevx mode installation and upgrade, then it works fine.

• Since I upgraded to El Captain mail has not learned from my spam or not spam choice.  I can't find a way that I can block specific sites.  Suggestions?

  Since I upgraded to El Capitan mail has not learned from my spam or not spam choice.  I can't find a way in the preferences to designate specific as spam sites as I used to be able to do.  Suggestions?

  Hi DACav

  You can create a rule that sends the e-mail from a particular area in your trash.

  Address postal (El Capitan): use rules to manage your Inbox

• HP Probook 450 G1: Windows 8 HP recovery disks has not detected

  Hello

  In the hope of someone can help me. I recently had a problem due to what I have to perform a recovery using HP RECOVERY discs [I ordered it] I don't have the HP Recovery Manager or the recovery of microsoft. So I have to do only through HP recovery disks.

  If his sudden has not detected in my laptop. I hit the bottom of the hard drive, I can feel that it is rotating. When I double clicked on it. It appears that I have to insert the disc. [Although I have inserted]. I wiped also DVDs with a cloth dry go with stripes. I tested on my PC it detected [of course it won't work because it is not HP PC].

  I also diagonsised the hard drive [wide test] component, it has demonstrated that it meets the test. I tested both with other CD/DVD games. It works very well.

  I hope you got my problem.

  Product number: F6B14PA #ACJ

  Thank you

  Hello

  Thanks for posting in the HP Support forum.

  Please correct me if I'm wrong, but from your description, I understand that the HP Probook 450 G1 does not detect the recovery DVDs. However, the other CDs/DVDs work fine and the recovery (at least detected) on another PC media.

  I understand that you need to recover, but despite this, Windows starts correctly now? What is the problem you can get you to try to recover? In Winows, recovery disks are recognized?

  To be honest, I don't know why it is not detected, but there are some things you can try:

  -Boot in the BIOS and disable secure boot + turn on Legacy mode

  Details > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/The-selected-boot-device-failed-Press-enter-to-continue/m-p/5730515

  Details > > http://support.hp.com/us-en/document/c03653226

  -Try to boot from the media of recovery of the DVD (first is the one that is re. OS - I see, you should have 2 recovery DVDs - one for the OS, one for the drivers).

  keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu. Choose F9 to open the boot options. Select the USB drive as boot option.

  I would like to know if it works for you.