SPA8000 GPON sip GPON del oneway speech

Similar Questions

• GPON with Apple airports, no internet access.

  Hello. I use airport time capsule/extreme 5th and 6th generation and huawei gpon terminal hg8310h. I got to the base station of configuration in dhcp mode and green light is ok, but not internet access.

  My ISP tells me that there is problem with Apple base stations. Unfortunately in google there are very little information on the airports and the gpon. I tried to reset the base station and etc. There is no success. Anyone know if there is such a problem with gpon technology and Apple base stations? Or maybe I'm looking for something different?

  Fiber type systems may have problems with the apple airports. It is difficult to explain, and you must provide us with a screenshot of the wan port real on the AE or TC you used.

  This issue will be generally visible that the ISP has given you a gateway which is not in the primary IP address subnet. If that makes no sense to post you the screenshot... but you should NOT change anything... Let's see your public IP address but also for a long time that it is dynamic and not static, it won't matter. Your IP address will change in 24 hours.

  I posted this kind of thing before. Nothing shows up well in google that is useful though.

  Ask your ISP... are they using IPv6 as it can always be a problem and the exact settings on the router are not clear for us... If IPv4 still make sure your getting a public routable address... Not all ISPS now provide public addresses.

  My Apple routers have never worked on my broadband as the main router... It is not the same issue... but it is something that apple clearly knows the impact is too small so that they care. If they exposed more controls, then we could solve this... but Apple phased out the controls. And even in the operating system most recent continues to remove them. My advice is very simple. Get a different router. At least until Apple take this seriously you won't be able to fix. And the ISP sounds like they are aware of the problem, but will not be useful either, because it is probably the only apple routers that have this problem. Conclusion... buy a compatible router.

  Use your apple routers in bridge for wireless and backups etc...

  You can even use them in a configuration a bit more complex, called static IP address... I use with another router.

  Re: time capsule Airport Guard disconnection

  For now, you probably have no choice... but give me the info that I asked, and we can work out where the problem is.

• Speech recognition for laptop Dell says he can hear me, but it won't recognize voice commands.

  I'm trying to implement recognition voive and my computer laptop dell Inspiron running windows 7. He says he "can not hear me. the settings for recording are turned upward and the grid light up answers when I speak. I do not use an externel microphone. Why can't I configure speech recognition?

  original title: recognotion Voice can't hear me

  Hello

  What speech recognition program do you use?

  You can try the steps in the link and check if it helps to solve the problem.
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266424

  
  See also steps from the links for more information:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows7/set-up-your-microphone-for-speech-recognition
  Set up your microphone for speech recognition
  http://Windows.Microsoft.com/en-us/Windows7/set-up-your-microphone-for-speech-recognition

• Sharing account SIP SPA8000

  
  

  Hello!

  Thank you very much!

  Kind regards.

• In the speech recognition dictation does not

  While he was trying to use the dictation in speech recognition, no speech text can't.  Was working fine before.  No change to the system, but has several different restorations using a variety of dates spanning back to the initial installation of Vista.  (It was the 10th time that I had to reinstall the OS since I got this computer...)  I am running Vista Home Premium 32 bit SP2, on a Dell XPS410.  None of the posts I've seen here have worked, but I wonder if anyone else has tried the spoken command "Start typing.  When I do that, it will convert text spoke of the individual letters but still will not recognize whole words, obviously not a very useful thing if you dictate a letter.  Normal order, IE. Start Notepad or grid of mouse or scroll work etc fine, but tempting product just dictation one what was that answer, or it will try to open a program, it thinks I want to.  I had re form this feature for every installation, it gets old.  All my drivers are up to date.  Once I did a fresh install and all updates from microsoft and dell and used the computer for anything, have not installed any third-party software be it, simply left the system power and ran only chkdsk and other utilities MS once a week or two and, voila! from now, the thing is finished installing, he already had errors listed in Event Viewer.  After 3 months of abot, he operated with about 60 percent of its features to work, the non-functional remains.  Does not require any intervention from the user to the first slide on the ultimate BSOD crash, which, as always results in a resettlement, as nobody on the planet can provide much in the way of answers or help.  I use computers and Microsoft products since 1983 on a daily basis and keep waiting and hope something that works as advertised, but already I see problems of the usual kind happening in windows 7.  Typical.   Ah, sorry, lost in a mug shot here.  Any suggestions on the problem of the dictation?

  I'm going to assume that you use a headset microphone any. If so and you are using a laptop with a built-in microphone, go to the sound control panel and disable the built-in microphone so that he is not inadvertently picking your voice as well.

  About the command "start typing", it is intended to allow you to start dictating individual letters as a, b, c, and so on. It is not supposed to be used to capture the General dictation. Before you try to dictate, make sure to disable this mode by saying "stop typing.

  Another good forum for more information of the Windows speech recognition is:

  http://tech.groups.Yahoo.com/group/Ms-speech/

  Good luck!

  -Russ

• "' Error of speech recognition: voice recognition couldn't start because the language configuration is not supported.

  OP: Windows speech recognition

  Hi, I have a Dell Inspiron 1545 with Windows 7. I just put in place the Windows speech recognition and finished the installation and the tutorial. I went to use and it says:

  Speech recognition error

  Speech recognition could not start because the configuration of the language is not supported.

  The recognizer language must match the language of the user interface. Please change the recognizer language in the speech recognition under Advanced options control panel.

  I don't know what that means, I tried changing the settings under:

  Control Panel > accessibility > speech recognition > speech Advanced Options

  But nothing seems to work.

  Help!

  Hello

  Saw this in another forum and it WORKS!

  Hello

  I had the same problem. Strangely, I had other symptoms. I use the Turkish keyboard Q primary and English as secondary United States. As my speech recognition broke down, I saw that my office word and outlook mulfunctioned in what concerns the language of the keyboard. I was able to use the Turkish Q keyboard on any application, but when I open outlook or word, changes in the English language.

  It happened on xp for... so I turned on the language bar to assign the TR when I am using these applications. But the language bar never himself displayed on the bar of tasks or office. So I get this problem and I saw that you can solve this problem via regedit.

  go to computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  right click on the right and a new "string value" component name value can be by default, the value data must be set to "ctfmon" = "" CTFMON. "." EXE ".

  After that I restarted my machine and the language bar came to the taskbar. I went into applications and changing the language to TR. And there was a surprise for me. Speech recognition long gone was back at the top of the screen. (I tried everything that proposed that nothing worked)

  I'm not sure but maybe the difference in language between applications caused my problem. Or maybe ctfmon has caused. Try this one.

  I hope that this is the case for you and you can fix it too...

• Built in microphone will not pick up sound for Windows speech recognition

  My Dell Inspiron 1545 with a built-in mic, but for some reason any it don't will pick up any sound at all for the Windows speech recognition (Windows Vista).

  Hi Matthew,
   
  Thank you for writing to Microsoft Windows Vista Answers.

  Have you checked to see if the correct settings have been selected for the microphone in the computer?

  Try to access the control panel > Sound > Audio. Check the recording tab if the Microphone is on and working. Click on set up and once you see the working driver (i.e., reacts to your voice), right click on it and the default value.

  Later try to put in place the program of speech recognition in all programs > Accessories > accessibility > Windows speech recognition and try settings different microphone to the edge we respond to your voice.

  You can also try to update the audio drivers. Access the link below and try to download the drivers.
  http://support.Dell.com/support/downloads/DriversList.aspx?OS=WLH&OSL=en&catid=-1&impid=-1&SERVICETAG=&SystemID=INSPIRON1545&hidos=WLH&hidlang=en&TabIndex=

  Also access the link below to troubleshoot the integrated Webcam and digital Microphone array in PC Dell laptop:
  http://support.dell.com/support/topics/global.aspx/support/dsn/document?c=us&l=en&s=gen&docid=397D0C4AF7AA90D8E040A68F5B283A3E&journalid=6DD6C133CFD8091CE040AE0AB5E16CFC&Query=d2ViY2Ft&SystemID=INS_PNT_PM_1520&ServiceTag=&contenttype=-1&os=-1&component=-1&lang=-1&doclang=en&toggle=true#5
   
  Hope one of these AIDS.

  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Dell Inspiron 1525 Microphone does not

  I have a Dell Inspiron 1525 with a built-in microphone. I run on vista. The microphone is not picking up my voice. I went to the control panel. I have made sure it is activated, and all volumes are rising. It is said that SigmaTel Microphone Array works, but that's not true. I also uninstalled and then reinstalled the SigmaTel driver. I did a system restore and that didn't help. The speech recognition does not pick up my voice either. All other sounds work fine, I built in Webcam which works very well, except for the record. But who is also defined on such sigma with all volumes upward. I've had this computer for over a year and the microphone used to work, I think that when I updated something she decided to not work. But I really need my microphone to work, and I am really frustrated because I can't use it. ANY advice would be appreciated thanks!

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx
  --------------------------------------------------------

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Backup and restore (premium) Dell got a 403 - Forbidden: access denied

  When I try to access my Dell downloads on the recovery feature

  I get a web page 403-Forbidden: access denied

  Anyone know what is happening?

  See you soon

  Yes, I can do... I'm trying to reinstall the Media Suite Essentials...

  Anyway... someone directed me to a website live smartsource.dell.com/web/main.aspx

  to download the files... but now I have another problem with the download...

  The server could not process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (ServiceBehaviorAttribute or configuration behavior) on the server in order to send information on exceptions to the client, or turn on track in accordance with the software Microsoft .NET Framework 3.0 SDK documentation and review the server trace logs.

  Server stack trace:
  System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood (response Message, fault of MessageFault, String action, MessageVersion version, FaultConverter faultConverter)
  at System.ServiceModel.Channels.ServiceChannel.HandleReply (ProxyOperationRuntime, ProxyRpc & rpc operation)
  at System.ServiceModel.Channels.ServiceChannel.Call (String action, ProxyOperationRuntime, Boolean, Object [ins] oneway operation, Object [], TimeSpan timeout breaks)
  to System.ServiceModel.Channels.ServiceChannelProxy.InvokeService (IMethodCallMessage methodCall, operation of ProxyOperationRuntime)
  at System.ServiceModel.Channels.ServiceChannelProxy.Invoke (IMessage message)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  at SmartSource.Components.ILaunchNotifier.NotifyLaunch (String UserId)
  at SmartSource.Components.InternalProxy.NotifyLaunch (String UserID)
  SmartSource.Components.SingleInstanceApp.Run (form mainForm)
  at SmartSource.MediaManager.Program.Main)

• Force10 problem and Dell Openmanage Network Manager snmp

  Hello

  I have install snmp on Force10: traps, string community, I have also setup set up on omnm, but for some reason, I could not authenticate with F10, please find config below as well as key details:

  Dell10G-1 #show running-config

  Current configuration...

  ! Version 9.0 (1.3)

  ! Last modification of the configuration to Fri Feb 21 14:07:21 2014 by default

  ! Startup-config updated Fri Feb 21 12:50:21 2014 by default

  !

  start the primary system battery-unit 1: A:

  start a system secondary battery-unit 1: B:

  start the system default stack-unit 1: A:

  start the primary system battery-unit 2: A:

  start a system secondary battery-unit 2: B:

  start the system default stack-unit 2: A:

  !

  redundancy full automatic synchronization

  !

  hostname Dell10G-1

  !

  enable password 7 b125455cf679b208d3169fc631698be5722a1b01b7edad00

  !

  username admin password 7 269672acad1160b3ff0b65cde5149f32

  !

  no activation of dcb

  !

  disposal of battery-unit 1 S5000

  !

  stack stack-unit 1-group 14

  !

  stack stack-unit 1-group 15

  !

  TenGigabitEthernet-1/0 interface

  no ip address

  hybrid portmode

  switchport

  TrustDSCP of service-policy input

  no downtime

  !

  interface TenGigabitEthernet 1/1

  no ip address

  hybrid portmode

  switchport

  TrustDSCP of service-policy input

  no downtime

  !

  interface TenGigabitEthernet 1/2

  no ip address

  hybrid portmode

  switchport

  TrustDSCP of service-policy input

  no downtime

  !

  interface TenGigabitEthernet 1/3

  no ip address

  hybrid portmode

  switchport

  TrustDSCP of service-policy input

  no downtime

  !

  interface TenGigabitEthernet 1/4

  no ip address

  hybrid portmode

  switchport

  TrustDSCP of service-policy input

  no downtime

  !

  interface TenGigabitEthernet 1/5

  no ip address

  hybrid portmode

  switchport

  TrustDSCP of service-policy input

  no downtime

  !

  interface TenGigabitEthernet 1/6

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/7

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/8

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 9/1

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/10

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/11

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/12

  no ip address

  hybrid portmode

  switchport

  TrustDSCP of service-policy input

  no downtime

  !

  interface TenGigabitEthernet 1/13

  no ip address

  hybrid portmode

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/14

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/15

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/16

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/17

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/18

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 1/19

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 1/20

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 1/21

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 1/22

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 1/23

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 1/24

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/25

  EQL-con2 description

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/26

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/27

  no ip address

  hybrid portmode

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/28

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/29

  no ip address

  hybrid portmode

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/30

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/31

  no ip address

  hybrid portmode

  switchport

  no downtime

  !

  interface TenGigabitEthernet 1/32

  no ip address

  no downtime

  !

  interface TenGigabitEthernet 1/33

  no ip address

  Shutdown

  !

  TenGigabitEthernet 1/34 interface

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 1/35

  no ip address

  Shutdown

  !

  interface 1/48 fortyGigE

  no ip address

  Shutdown

  !

  interface fortyGigE 1/52

  no ip address

  Shutdown

  !

  disposal of battery-unit 2 S5000

  !

  stack stack-unit 2-group 14

  !

  stack stack-unit 2-group 15

  !

  TenGigabitEthernet-2/0 interface

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/1

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/2

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/3

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/4

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/5

  no ip address

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/6

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/7

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/8

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 9/2

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/10

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/11

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/12

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/13

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/14

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/15

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/16

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/17

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/18

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/19

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/20

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/21

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/22

  no ip address

  Shutdown

  !

  interface TenGigabitEthernet 2/23

  no ip address

  no downtime

  !

  interface TenGigabitEthernet 2/24

  EQL-con1 description

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/25

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/26

  no ip address

  hybrid portmode

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/27

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/28

  no ip address

  hybrid portmode

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/29

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/30

  no ip address

  hybrid portmode

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/31

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/32

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/33

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  TenGigabitEthernet 2/34 interface

  no ip address

  MTU 12000

  switchport

  no downtime

  !

  interface TenGigabitEthernet 2/35

  no ip address

  Shutdown

  !

  interface fortyGigE 2/48

  no ip address

  Shutdown

  !

  interface fortyGigE 2/52

  no ip address

  Shutdown

  !

  interface ManagementEthernet 0/0

  no downtime

  !

  ManagementEthernet 1/0 interface

  IP address 10.0.0.30/24

  no downtime

  !

  ManagementEthernet 2/0 interface

  IP address 10.0.0.25/24

  no downtime

  !

  ManagementEthernet 3/0 interface

  no downtime

  !

  ManagementEthernet 4/0 interface

  no downtime

  !

  ManagementEthernet-5/0 interface

  no downtime

  !

  ManagementEthernet 6/0 interface

  no downtime

  !

  ManagementEthernet 7/0 interface

  no downtime

  !

  ManagementEthernet-8/0 interface

  no downtime

  !

  interface ManagementEthernet 9/0

  no downtime

  !

  ManagementEthernet-10/0 interface

  no downtime

  !

  ManagementEthernet-11/0 interface

  no downtime

  !

  interface Vlan 1

  ! unidentified TenGigabitEthernet-1/0-17, 27, 29, 31

  ! unidentified TenGigabitEthernet 2/2,5,26,28,30

  !

  Vlan 100 interface

  ISCSI description

  iSCSI name

  no ip address

  tagless TenGigabitEthernet 1/24-26, 28, 30

  tagless TenGigabitEthernet 2/24-25, 27, 29, 31-34

  no downtime

  !

  interface Vlan 150

  VMotion description

  no ip address

  Tagged TenGigabitEthernet 1/27,29,31

  Tagged TenGigabitEthernet 2/26,28,30

  Shutdown

  !

  interface Vlan 999

  Speech description

  the voice name

  no ip address

  Tagged TenGigabitEthernet 1/0-3, 5, 12-13

  no downtime

  !

  interface Vlan 4000

  no ip address

  Shutdown

  !

  interface Vlan 4001

  no ip address

  Shutdown

  !

  interface Vlan 4003

  no ip address

  Shutdown

  !

  interface Vlan 4010

  no ip address

  Shutdown

  !

  interface Vlan 4020

  no ip address

  Shutdown

  !

  interface Vlan 4030

  no ip address

  Shutdown

  !

  management route 0.0.0.0/0 10.0.0.1

  !

  class service dynamics dot1p

  !

  SNMP-server community Monitoring ro

  Server enable SNMP traps bgp

  SNMP-Server enable traps snmp authentication linkdown, linkup cold start

  Server enable SNMP traps vrrp

  Server enable SNMP traps lacp

  entity of traps activate SNMP Server

  Enable SNMP-Server intercepts stp

  Server enable SNMP traps ecfm

  Server enable SNMP traps vlt

  Enable SNMP-Server intercepts fips

  Server enable SNMP traps xstp

  Enable SNMP-Server intercepts ets

  Server enable SNMP traps envmon cam-use temperature power fan

  Server enable SNMP traps eoam

  Enable SNMP-Server intercepts pfc

  Host Server SNMP 10.0.0.238 traps version 1 monitoring - port udp 162

  !

  class-map correspondence-everything ClassMap1

  match ip dscp 46

  !

  Policy-map-input TrustDSCP

  Class-card service-queue ClassMap1 2

  Trust diffserv

  !

  Lldp Protocol

  to advertise dot1-tlv, port port-protocole-vlan-id-vlan-id

  advertise dot1-tlv-name of vlan id the vlan-999

  advertise med

  advertise med 999 6 46 voices

  !

  0 line console

  line vty 0

  line vty 1

  line vty 2

  line vty 3

  line vty 4

  line vty 5

  line vty 6

  line vty 7

  line vty 8

  line vty 9

  !

  end

  ______________________________

  Dell10G-1 #show snmp group

  GroupName: v1v2creadg security model: v1

  readview: v1v2cdefault writeview: no give view entry

  notifyview: v1v2cdefault context: no context specified

  status: Active

  GroupName: v1v2creadg security model: v2c

  readview: v1v2cdefault writeview: no give view entry

  notifyview: v1v2cdefault context: no context specified

  status: Active

  GroupName: v1v2cwriteg security model: v1

  readview: v1v2cdefault writeview: v1v2cdefault

  notifyview: v1v2cdefault context: no context specified

  status: Active

  GroupName: v1v2cwriteg security model: v2c

  readview: v1v2cdefault writeview: v1v2cdefault

  notifyview: v1v2cdefault context: no context specified

  status: Active

  __________________________________

  Dell10G-1 #show snmp community

  Community: monitoring

  Background: no

  Security-name: v1v2creadu

  Community: public

  Background: no

  Security-name: v1v2creadu

  Don't know if there are other settings of snmp that must be put in place or I missed something

  Thank you for your help

  Hello

  Can you try to set up OMNM like this http://en.community.dell.com/support-forums/network-switches/f/866/t/19535001.aspx

  Set up two profiles of authentication in OMNM. ((1) SNMP v1/v2c and used the SNMP community string, I put on the Force 10 switch 2) Telnet/SSH using the switches telnet user ID, password and the password 'Enable' leaving him activate ID empty.

• cannot configure the windows speech recognition

  Hello

  I have a computer dell laptop 3421 with windows 8

  I try to use the windows speech, but I get an error "windows speech is not available for the current display language.

  Please change the recognizer language in the speech recognition under Advanced options control panel

  So I tried via the control panel I only have this line "Set up your recognition of experience", but I can not click on, it is disable

  Thanks in advance

  Not all languages are supported. For what it's worth - speech recognition of the IMO does not very well, or not at all. A few simple tasks that might work can be made much faster as normal.

  MS wrote this-

  • Speech recognition is available in English, French, Spanish, German, Japanese, simplified Chinese and traditional Chinese.

• How to scan a document multi-page with preview in macOS Sierra with Scanner and printer Dell network?

  Hello, I know that macOS Sierra had a big problem with PDF / scanning due to an update to the pdf engine. Here we have Dell printers / scanners Dell C3765dnf Color MFP. We usually scan with Preview app (import of the device). But with macOS Sierra, the scanner scans all pages but the first page is available after the scanning process. Maybe can someone help?

  Have you tried scanning with Capture of Image?

• issue text iOS 10 speeches

  In the case of iMessages or other applications, when I press the microphone icon to use the speech to text, the speech feature opens but then it takes about five seconds before there is a beep to begin to speak and convert speech to text.  In iOS 9 it was immediate... it is really annoying.

  Hi Hawkeye222,

  I understand that you experience an unexpected delay when you try to use Dictation on your iPhone. I know it's important to be able to quickly enter text with this feature, so I'm happy to help you.

  Did you have a troubleshooting for this on your own? If this isn't the case, we will begin by updating this feature. We can do this by opening settings > general > keyboards, then scroll down and disable the dictated. Leave it for a few seconds, then turn it back on and test.

  Thank you for using communities Support from Apple. See you soon!

• Dell U2711b compatibility & iMac

  Is U2711b Dell compatible iMac (Sierra) as a 2nd monitor? I have to buy special adapters/connectors? It is currently connected to MacPro to 2010.

  Should be good, Yes, you'll need an adapter but without knowing the year of the iMac, it is impossible for us to know what type of adapter to recommend. However, if your iMac is an iMac 2011 or a later version, you use an adapter Mini DisplayPort to VGA, HDMI, etc... Depending on the type of connection that you want to use Dell. You can get the Apple adapters, btw you can get from other sources, but turns out not all are made similar. So, it is wise to buy a quality one rather than buying at low prices and have to be replaced several times.

• Mac os Sierra, Dictation and speech pain missing from system preferences

  Hi, it's Stephen. I've upgraded to mac os Sierra, and now, for some reason, Dictation and speech is missing in system preferences. It is preferably pain that I use to activate enhanced dictation, which is a feature that allows the use of dictation, even in offline mode. I reported the problem/bug to apple and I called him support Apple Care technical on this subject yesterday. Can someone tell me why Apple took dictation and the word of the preferences system Mac os Sierra? Or was it just an accident? Any help would be greatly appreciated. Thanks in advance

  It was not withdrawn. There is a tab in the keyboard preferences. And there is more in the accessibility preferences.