Force10 problem and Dell Openmanage Network Manager snmp

Similar Questions

• DELL UPS Network Management Card firmware update is not possible in the management of inverter DELL Multi console

  I have a problem with the update of some old software on a DELL UPS Network Management card in DELL Multi UPS Management Console.

  We have a few more recent and some models with very old Firmware. The older firmware is: 01.02.0013
  I imported the update of the firmware: 01.16.0001
  If I select this version behind the inverter with firmware 01.02.0013 it is a red exclamation point.

  

  Also, I can't get to the this inverter https address.

  So I do not know how update the firmware of the network management card, please anyone who has a solution...

  .

  I got it finally working.

  I couldn't connect to the interface webGui of UPS in https on IE 6,7,8,9 and calibrated to an ssl error Firefox.
  I could not update the firmware using DELL UPS management software can. fatal error.

  I then installed Chrome, when connecting to the web GUI I ignored the warning of certificate error and waited...

  YES. The web Gui appeared, asking for the password and the Web GUI that I could install the firmware 01.14.0003

  After the update of the firmware in the webgui I was able to upgrade to 01.16.0001 in DELL UPS software Multi management.

  

• OpenManage Network Manager does not connect to

  I use the 5.1 openmanage Network Manager to manage the switches PowerConnect 7048.

  I am able to manage/monitor switches using SNMP without problems.

  However when I use telnet/ssh it keeps throwing errors saying "1 has failed to authenticate. Please click here for a list of devices that have failed. "trying to manage these devices by default".

  However the document says what needs to be written to the field ID to enable.

  I got it going!

  There was a problem with ssh on my switch. When activated it works now

• OpenManage Network Manager 5.3 does not display the data traffic Analyzer

  Hi I have OMNM installed on a virtual machine and a PC Dell-6248 okay discovered and that responded to the questionnaire. However the flow of traffic or Traffic Analyzer features do not work. I recorded the switch (click right switch\Traffic Analyzer\Register) and activated sflow on swtich (port 6343) and implementation of the polling and sampling on a few ports in order to generate traffic data.  The data appear to be sent from the switch ok because I tried to install the application SFlow trend on the same machine as OMNM and that contains traffic data, no problem.

  Java 7, ActivePerl, Adobe Flash and reader are all installed and firewall disabled. The only other thing a bit strange is that the network display feature works on Google Chrome, it doesn't work on FireFox or IE and Performance indicator Gagues (CPU usage, memory usage, temperature) do not work either. I'm not sure if they are related to the Traffic Analyzer problem...

  Windows Server 2008 R2 64 on a VMWare virtual machine. PC-6248 switch sfotware version is 3.2.0.7

  Any help would be appreciated.

  Thank you

  Andrew

  Eventually found the problem here. The absence of traffic Analyzer data was caused by the presence of an interface VLAN IP address on our switch. I had recorded the physical switch ok in OMNM, but the sflow data do not seem to come from the IP Address of the switch when I ran a trace of Wireshark on sflow traffic. Instead sflow traffic came from a different IP address that turned out be a VLAN IP interface.  As the what IP interface was not mandatory on the VLAN special (he was there for outside access mamgement band only), I managed to remove (only the period of INQUIRY, not the VIRTUAL local area network) and now sflow traffic appears to come from physics going on own IP address. I then started to get traffic Analyzer data in OMNM.

  Thanks for your suggestion on the use of Wireshark to plot the data on this guy as he lead me to the solution.

  Andrew

• Dell OpenManage (64-bit) Version 8.3.0 systems management software

  Dell OpenManage Systems Management Software (64 - Bit) Version 8.3.0 will work on a server of PE2900 running Windows Server 2008 R2?

  Dell OpenManage Systems Management Software (64-Bit)

  Version 8.3.0

  Hello

  I'm afraid that OM 8.3 does not support PE2900.

  topics-CDN.Dell.com/.../Dell-OpenManage-Software-V8.3_support Matrix_FR - us.pdf

  Note: This forum is dedicated for OpenManage Essentials. In the future please post your query on OMSA on respective forum for quick/prompt response.

• Cannot Wireless network Management Application

  We use Cisco Wireless LAN Controller 4400 for two years. Yesterday, we had a report that the Wireless does not work. We found that the problem is Cisco Wireless network Management Application does not start. If I try to start it, I get the network Wireless Application Management with Error 1067: the process terminated unexpectedly. I tried to clean boot, but that doesn't fix it. We have not changed anything on the server. Any suggestions?.

  It seems that the firmware is damaged or the compact flash (CF) is dying.

  Have you tried to reboot the device?

  Have you tried to update the firmware?

• No Edge 15 Broadcom 802.11ac none hosted network management and stability problems

  I have a new edge 15 that came with Windows 10 64-bit pre-installed. I want to be able to run the soft AP WiFi so I can connect to my wifi adapter.

  The WiFi card is a Broadcom 802.11ac and according to other computers using Dell with the same chip, but the Dell Windows 7 driver supports hosted network supports. But on my computer with the latest driver 7.35.267.0 dated 05/14/15, supported network hosted shows no., which means that the pilot and the chip does not support.

  It seems that it's a driver problem and hardware supports hosted networks.

  Also, sometimes when I turn on my computer, the WiFi does not detect the AP. It's the continuous offshore. I can get the connectivity by deactivation and reactivation of the interface. A pain. Not a big pain, but pain. Looks like the driver reload or turn on the radio after that sleep does not work properly.

  Can Lenovo if you please provide a stable driver for the Broadcom chip work.

  Thank you.

  I ended up completely reinstall windows 10 and uses the stock drivers.

  No bloat ware lenovo. Works fine now.

• Problem with routing/circuits between SG300-10 and Dell Powerconnect 5224

  Hello

  I just bought a SG300-10 switch and loaded new firmware 1.27 on it.  Configure my VLAN and trunks, but I have a weird problem that I can't seem to understand.  It may be something small, I'm missing, but no matter, I have been scratching at it all day and I kicked in the butt.  If anyone can point me in the right direction or maybe something that someone see in my config which is wrong, I can get the terminology/theory wrong, after all, I just spent my CCNA :)

  My configuration:

  I have the SG300-10 as my switch and changed over to L3, so it may be my core of my small network.  On port 1, vlan 200 is configured as my unidentified native PVID and I put it to 210(LAN network) to trunk VLANs, 220 (management vlan) on the tag to the Dell powerconnect 5224 24port switch.  On port 1 of the Dell switch, I install as a trunk it as well with the same configuration (vlan native of PVID unidentified 200, 210 and 220 tag trunking).

  I have installed virtual interfaces on the SG300 for each VLAN (vlan 210 = 192.168.210.1/24, vlan 220 = 192.168.220.1/24) and on the Dell, since this is a feature of L2, I changed the vlan 1 to 220 management and assign the IP 192.168.220.2/24.

  Now, since the SG300 web interface, I ping IP management Dell (192.168.220.2/24)successfully and vice versa, can ping from Dell web interface to one of the IP of the bridge VLAN (210.1 & 220.1) successfully so that test, to me, looks like the Dell communicates with the SG300.)  I also have the default gateway of the Dell 192.168.220.1 printer value.

  Server IP: 192.168.220.10/24

  Workstation IP: 192.168.210.80/24

  Now the dilemma:

  I have a server plugged into switch port Dell 2 (configured as 'hybrid' because there is no option to access, value 220 PVID, vlan, worth 220 Untagged) and from the server, I can ping IP management dell very well switch and can ping the IP of the gateway of great SG300 so.  On the SG300 switch, on port 2, I plugged in a workstation (configuration is in access mode, vlan 210 unidentified) who can not ping the server plugged into the dell switch.  The workstation, I can ping all the SG300 interfaces and also the IP management dell but I can't ping the server.

  Any ideas anyone can provide is much appreciated!

  Edition of VLAN.

  Lenell, thank you for the call tonight. It seems that we have found the problem. The SIN, although it is configured with a default gateway, the gateway that brings 0.0.0.0. We also checked the NAS works from the same subnet to connect but fails outside of the subnet. Conversely, we checked 2 computers have no problem to connect through the VLAN level 3.

  I hope we got the right direction.

  -Tom
  Please evaluate the useful messages

• Whenever I have a network problem and solve this problem, my computer is given a different number. For example, I'm a 4 device on my network, but I want to be the number of device 1.

  Whenever I have a network problem and seem to fix I get a new network number and now is showing Network 4. How can I get that back at number 1?

  I see this on my Vista Machine as well as my 7 machine

  original title: Networking

  Remove the connection from the Device Manager and reinstall the network drivers.

  Check also:

  Windows 7 - Rename network connections in Windows 7
  http://www.SevenForums.com/network-sharing/24286-Rename-network-connections-Windows-7-a.html

  Unidentified network is displayed on every reboot of Windows 7 and stop access NW
  http://social.technet.Microsoft.com/forums/en-AU/w7itpronetworking/thread/3f8999b6-495D-4065-9825-2271b4c898f6

• Intel wifi adapter xps m2010 disabled in Device Manager and in the network and sharing Center

  Original title: intel wifi adapter xps m2010

  for some reason any my intel pro wireless network adapter not turn on using the shortcut keys or by selecting with the mouse. Says its disabled in device in network and sharing Center Manager yet it does give me the option to activate it. Im confused

  Hi pillowgod,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  You can check the following link and try to run the manual Intel WiFi diagnostic tool to check the functionality of your WiFi adapter.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025780.htm

  You can also try uninstalling and reinstalling the Intel wireless card and check.

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the network adapters in the Device Manager

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  You can also see the Intel Web site and try to download the latest version of the card wifi drivers.

  http://Downloadcenter.Intel.com/default.aspx

  You can also check out the link:

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025807.htm

  Hope this information is helpful

• [Beginner] Reference Dell Audio and SD Realtek Audio Manager

  Hello world!

  A few days ago, I bought my first Dell: it's an Inspiron 15 3537. So far so good. Installed Windows 7 64 bit and some drivers, including ALC3223 Realtek High-Definition Audio Driver. Now, the sound is perfect when it's speakers, but all the times that no matter what sound plays on the helmet (the portable computer has a combo Jack), he is very strong and there is a unpleasant noise. If there is no sounds play, after a few seconds, the noise stops. (edit) The gentle sound remains the same regardless of the volume and does not grow stronger if the volume is turned up.

  I tried to adjust things in the sound menu, searched for solutions online and my best bet would have been accessing the Realtek audio Manager.

  But after installing the latest driver Realtek, I get only Audio from Dell, and it isn't much help. Looking for a Realtek in the control panel or in folders only leads to the Audio from Dell. Here, I discovered why the strange whistling sound in the headphones will stop when no sounds are played, but I can't find anything to make the noise go away:

  

  What the Dell? While I hoped something like this (taken from the internet):

  

  So, can someone tell me why my laptop is Dell Audio when I install Realtek driver? Can I "non-Dell' Realtek Audio Manager on my laptop? And suggestions to reduce the background noise in the headphones?

  Hello. Dell and Realtek replaced the DD Realtek Audio Manager with Dell's Audio Manager on Dell laptops. I don't know why. The DD Realtek Audio Manager can provide a separate headphone and speakers, volume control while the Dell version can not. Several people have reported that even when they download & install a driver directly from Realtek site, Dell Manager returns. I do not know how to defeat that (I don't have Realtek on my laptop and not the one who has it posted a method).

  You can use an online with the headphone volume control. My Latitude with IDT is not the problem of the headphone volume a lot of laptops from Realtek, but I use Koss control just because it's convenient. It's a short extension for headphones with a cursor of volume built in mitigation.

  Regarding the drivers, Dell has only one for your model out for Win7. The only other drivers Realtek would be on the Realtek site. You can also use the native Windows audio driver. To switch to it from the Realtek, follow these steps:

  1. open Device Manager (type devmgmt.msc in the start search box and press ENTER).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If you still get the hissing or background noise with the native driver, then it is almost certainly in the material. If the noises disappear when you use the native driver, then they are caused by the driver from Realtek.

• Audio problem with Dell Latitude E6420 and Windows 8.1

  Hello community,

  I installed Windows 8.1 on my Latitude E6420 and I can get the sound to work. I installed the drivers available for Windows 8, but he doesn't play any sounds. The only thing that works continuously via a browser (e.g. youtube). When I test the device "speakers / headphones ' this is for me a"Failed to play test sound."but the"helmet of communication"device works without any problem.

  I can not activate the device "speakers / headphones" because it blocks other applications (Lync 2013) so I have to keep this option disabled.

  I look on the web for similar problems and it all points to the drivers for the video card (!)

  Is there a version of driver for this model? Or I can not use the latest version of the software in this model?

  Hello. See here for a list of Dell of the models that work with 8 and 8.1. Dell recommends not installing 8.1 on the Latitude E6420 model. Dell said 8 is correct but does not provide an audio driver IDT even for 8. I don't think that there will be provided by any Dell IDT audio driver for 8.1 since it is not recommended to install. This means that you must use the native audio driver supplied with Windows. The native driver is generic and you can usually get audio to work when using it but not all functions are working properly. All I can suggest is to find the generic audio driver in Device Manager (I don't know how it is in the list) and try to 'update' by allowing Windows to search for an update on the internet.

  Maybe someone at our Windows 8 jury can suggest an audio driver IDT, you can try to use. If you post here tell them that you already posted on the Audio card to the laptop so that they will not move your message here.

• How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

  Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

  Hi heat110,
   
  -What is the brand and model of the router you are using?
   
  -You "Network Magic" software installed on your computer?
   
  Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
   
  Follow these steps to do the same thing:
   
  a. Click Start. Click run. Type Services.msc and press ENTER.
   
  (b) in the Services window, search for Pure Networks Platform service.
   
  c. right-click on the service and click on restart.
   
  d. restart the computer and check if you have got rid of the error message.
   
  Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.

• I have XP SP2 and am unable to install SP3. Problems with Windows install & download manager.

  I rebuilt a laptop from scratch using XP Home.  Currently, no software beyond basic MS core apps.  Not even MS Office.  I am trying to activate the automatic updates.

  The error messages that I get point to Windows Installer and/or MS Download Manager, but these same problems prevent me from deleting/updating install or Download Manager.

  If I run FixIt to activate the automatic updates to download SP3, the following error message is returned:
  _Windows Installer_
  The Windows Installer Service could not be accessed.
  This can occur if Windows Installer is not correctly
  installed.  Contact your support team.

  If I try to manually download the SP3 (WindowsXP-KB936929-SP3 - x 86 - ENU.exe), the following error is returned:
  _Microsoft download Manager_
  There was a problem opennig the Microsoft Download Manager.
  Update your computer with Windows Service Pack 2 or later version to download
  files using the Microsoft Download Manager.

  I think I'll through in circles.   I need SP3 for automatic updates, but impossible to install SP3 since SP3 is not installed.  I must be missing something obvious, but I simply cannot get by.  I'd appreciate any help - thanks.

  OK, I followed the link clicked on download, saved on my desktop, then tried to start the installation.  The returned message is:

  It is often the result of a corrupted download. Please restart the download. If this fails, you can try download with another browser such as Firefox or Chrome?

  Another possibility is malware that you have scanned with your preferred 'egi' software?

  Other free malware scanners...

  MBAM and SAS are glowing on this forum of many contributors. Other freebies are AVG and Avast.

  Tricky

• MXI-4, Manager of configuration problems and data base, clean install MAX

  Hello

  I have a problem with the MXI-4 kit / PCI-8331

  -C' is a clean install of MAX, using the default installation option.

  -Win XP 32. The PCI-8331 is the only PCI site in PC

  With the GUI of MAX does not, plug-and-play detects the jury.

  If I reboot, connect 8336 PXI and an another Council PXI (6641) in PXI basket, it's OK by PnP display.

  But as soon as I open MAX and expand the tree view of the devices, the Configuration Manager stops.

  I ge the message 'to NOR-PAL service Manager has encounterd a problem and needs to close' and 'MAX expired in the meantime a driver. "

  -J' have removed everything, reinstalled MAX, but the problem remains the same.

  -J' deleted configuration in C:\Documents and Settings\All Users\Application Data\National Instruments\MAX\Data Dictionaries\Last

  -I see a number of DLLs being re-written there, when I restart MAX, however there is no file config3.max (retrieved the entire disk) as suggested elsewhere.

  -It seems that if I only have the PCI card installed, I still have the same problem.

  I'd like to find if there is a problem with the hardware of the Board of Directors, the BIOS or the installation of MAX?

  Thank you

  Partially solved.

  The PCI-8331 seems to work in another PC, equipped with a newer BIOS.

  Could not test with MXI-8336 a hanging basket, as it is in a different location.

  Uptdating the BIOS of the computer 'defective' did not help, it seems like a new computer/motherboard is necessary.