Similar Questions

• Spacing of table of contents

  Is there a way to adjust, to increase, the minimum spacing between a table of contents entry and its page number for paragraphs of the single line? I know that I can insert nonbreaking spaces in long paragraphs, but if a paragraph fits on one line, it does not help.

  The screenshot below shows an entry on the first line which is too close to the page number. The second line is the way I want it to look, but I have to do a return forced to implement. Of couse, when I re - generate the table of contents the forced return disappears, so I hope that there is another technique.

  If editing the frame.ini file would control the spacing, how woiuld that be implemented?

  I swap this in the forum script in the case where there is a way to script it.

  

  If anyone can tell me if this is NOT possible, I understand that too (so that I don't know is not to keep trying to think of workarounds).

  Jay,

  The method I use is not obvious but work because of how FrameMaker seems to work.

  For EACH paragraph format used in your table of contents, those ending in KNOCK, open the paragraph Designer. One of the tabs (do not remember which) has a place to specify the spacing settings. There are three boxes: minimum, optimum, and maximum. The minimum is generally defined 75%, the optimum 100% and up to 125%. Add 100, or 200 or 300% for the minimum AND maximum, BUT NOT optimum, which is set at 100%. For example, the minimum would be 175%, the OPTIMA 100% and the maximum of 225 percent. Click Refresh all. I do this in the template file and then import the paragraph formats in all the files in your book. Then update the book.

  I think FrameMaker tests to adjust the spacing using minimum and maximum, determines where the line break and then sets the optimum spacing of 100%. The result is a line break shortly before the end of the line. You can experiment. The more you add to minimum and maximum, more space between the line break and the end of the line.

  Van

• Difference between USR and that uses tables from UPA_USR

  Hello
  
  I just want to know something about USR and uses tables of UPA_USR. It seems that these two table stores the same data. What is the purpose od UPA_USR table?
  
  Thank you
  
  MK
  
  Published by: user601746 on November 27, 2009 02:20

  Hi MK.

  UPA stands for verification of the user profile. All UPA * tables store audit data associated with the user rights, the group memberships. UPA_USR is one that stored audit of user profile data. It's the parent table, and he has a child table called UPA_FIELDS. For each user profile update there will be a single line in UPA_USR and for each field has changed there will be an entry in table UPA_FIELDS for the UPA_USR_KEY in the UPA_USR table. Also at any time there is a line in the table UPA_USR with UPA_USR_EFF_TO_DATE with a NULL value, indicating that it represents the current user profile.

  UPA is the table that stores the snapshot of the data for the user that includes the user profile, resource, and group memberships. It also features a column called DELTA, which is indeed a delta of changes that happened.

  Concerning
  YMI

• problems using tables

  I'm trying to put together a very simple site, a header, and then the next 5 lines of 5 images.  After inserting all the tables, when I begin to insert images, the structure begins to be messed up.  Some images appear, some don't.  And regarding the centering or spacing of the images, I don't know how to do this.  Is there a method for web design that is similar to the older dreamweaver page mode?  I would appreciate help with this.

  Paintings of the century is last of the creation of web pages.  We do not use the most with the exception of tabular data, such as the spreadsheet and graphics.

  Your time is spent learning to use CSS layouts with floats, margins, and padding.  See this example (without required tables).  Click on the images.

  Alt - Web templates: CSS semi-liquid, piece of evidence photos

  Nancy O.

• Using table of numbers

  Hello

  If I'm in number and I'm trying to change my name of the Table to include a brief description under the title / name, love; "Included in this list, you get... registration" How should I do this?

  Hi, PEF,.

  Click the title once to select the area that includes it.

  Hove, the mouse pointer on the bottom edge of the blue rectangle to the left. The pointer turns into a horizontal line crossed vertically by a double arrow head. Click and drag down to expand the box.

  This will allow a multi line table name. Forced a new line, use a newline (shift + return).

  Kind regards

  Barry

• How to use table 2 to draw an XY graph

  Hello ~

  I use for loop to teststand2014 to get 2 arraies with the same indicator loop as an attachment (Vi_array = input voltage, output power = Po_array).

  How can I build a XY Chart with these 2 arraies, Vi_array x and Po_array as Y?

  Thank you!

  You can create a table to 2 dimensions on the 2 tables, you mentioned and use the attributess of 'DataLayout' and 'DataOrientation' for the new table that you have generated. Please check attached sequence file created using TestStand 2010 version of how it can be done. I tested the graphics in XML reports.

• How to use table 1 d of waveform in the Matlab Script

  I use Lavbiew to make the classification of Vibration signal.

  The first problem I encountered is the form of incorrect data.

  The output signals are 1 d arrary of waveform. I don't know how to use the Matlab Script.

  is someone can help me with this?

  I really appreciate your help.

  Hey beauzhang,

  I hope that you are well today. It certainly seems that we lack in some problems with the different sources and data types of wells. LVM VI Express load you have emerged from a table of waveforms. So we would need to do a few things. First of all, we need to ignore the range of interests, and we must get the waveform data elements table.

  I have provided an example of how we can extract the waveform in position 0 of the table and then pass the array of data values to the script node Y. I have configured the entry of the data of a table 1 d Reals node (by adding an entry and then the right of entry and select choose data type.)

  If you are interested in getting the values Y and build the table like you did in the script, you need to implement a different subset of table and looping mechanism in LabVIEW code to move each item to the script individually. However, I would recommend working with the entry level instead.

  

  I hope this helps!

• Sequence of output using tables

  Hello

  How can I use a table to provide an entry for a sequence of motor input binary?  I tried to do, but the numbers that I put in the table are not the same ones that come out.  Here is an example of what I tried.  After the release of the survey, they both each exit 16.  Any help would be appreciated.

  

  
  

• External list of choice depending on using tables of database

  Hi all

  I'm looking for a list of choice depending on (DCL) for some of my metadata attributes. I have an external DB to fetch up LOV. I have created views but I do not see it in my configuration manager to use for the configuration of DCL. Did I miss something or I can't have a DCL based on external DB, it should be possible, in my opinion.

  Kind regards

  -Anand

  See here to access the external tables in DB / in UCM Applet configuration manager

• using table() cursor

  I created a table type in SQL by using the following code:

  CREATE OR REPLACE TYPE t_number AS TABLE OF number;
  

  Now I'm trying to refer to a procedure of this type parameter, as follows:

  CREATE OR REPLACE PROCEDURE invoice_maintenance (
    pt_invoice_id_in IN t_number DEFAULT t_number(0)
  )
  IS
  
  CURSOR c_data IS
       SELECT * FROM TABLE WHERE id IN table(pt_invoice_id_in);
  
  BEGIN
  ...
  

  but when I try to compile, I get ORA-00936: lack of expression.  I also tried:

  CURSOR c_data IS
       SELECT * FROM TABLE WHERE id IN table(cast(pt_invoice_id_in AS t_number));
  

  But that did not help.  What I'm doing wrong here?  I use 11.2.0.4.

  ... ID WHERE IN (SELECT COLUMN_VALUE FROM table (pt_invoice_id_in));

• Can I use a dimension of import command line using table interface?

  Hi guys

  I'm using EPMA to load dimensions by using the interface of the table, but I want to know if it is possible to launch using a command line?

  Concerning

  Yes, use client batch epma, have a read of http://john-goodwin.blogspot.com/2011/11/loading-to-epma-planning-applications.html

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Admin tab using table design

  Hi all
  Previously, we used to have an option to create tables on the Admin tab.
  Sites 11.8 guide it says that the same has been shifted to management tools in the Admin tab.
  I can't see the management tools node, even if I am able to see the system tools and other nodes.

  I tried on 11.8 JSK and same is the case on our development environmemnt, which is 11.8.

  My user has all of the ACLs and the roles.

  I am able to create a table from the Explorer of Sites with the same user credentials.

  Do you have any suggestions as why I am unable to see the management tools option in the Admin tab?

  Hi Vikas,

  Management tools have been removed from the tab Admin, and some features (especially for the management of users) moved to different areas.

  You must use the Explorer Sites if you want to create non-active tables.

  Bug 17666184 of the documentation has been triggered for that.

  Kind regards

  Stephan.

• Analysis of query and get the list of used tables

  Hi all

  I need to parse the sql query (simple & complex as well) and for a list of the tables used in the query.

  And need to validate the fact that list the tables against a whitelist that is kept in the file.

  I tried to write my own parser, because there are many ways to write complex queries, I'm unable to cover all scenarios.

  I need help, is there other ways to get the list of tables used in a query?

  Thank you

  Manon...

  In general you would add a condition 1 = 2 just to restrict the display of the entire table. Then should not be causing any noticeable performance degradation. You can even use ROWNUM< 2.="" that="" will="" do="" a="" count="" stopkey.="" which="" could="" be="">

  SQL > select * from emp where rownum<>

  no selected line

  SQL > select * from table (dbms_xplan.display_cursor);

  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  SQL_ID, 97f4bd002xfy0, number of children 0
  -------------------------------------
  Select * from emp where rownum<>

  Hash value of plan: 4269703525

  ---------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  ---------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      |       |       |     2 (100) |          |
  |*  1 |  COUNT STOPKEY |      |       |       |            |          |
  |   2.   TABLE ACCESS FULL | EMP |     1.    38.     2 (0) | 00:00:01 |
  ---------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------

  1 Filter (ROWNUM<>

  19 selected lines.

  But its always good to bench mark it yourself.

• Update and cancel standard existed IN. using tables interface PO lines

  Hello
  
  Can someone guide me please how to update and cancel the standard existed PO lines with tables interface IN....
  
  Thanks in advance,
  NS

  Hi NS,

  I think that it is not possible through open interface table, but you can update and cancel the po lines by using the following API respectively.

  (1) PO_CHANGE_API1_S.update_po

  (2) PO_Document_Control_PUB.control_document

  HTH
  Sanjay

• PeopleSoft HRMS 9.1 <>OPA 10.4 batch processor using tables db - exp/advice?

  The members of the forum - I'm looking for anyone who has experience in the integration of PeopleSoft Enterprise HRMS 9.1 with the OPA 10.4 batch using PeopleSoft dbase tables that can be easily accessed in program AE/SQR. Due to the requirements of very high flow with a large client company... thanks to the integration of service WSDL/IB/web is out of the question.
  
  In addition, this integration must be very reliable (IB tends to error intermittently).
  
  If someone on this forum has done this? This client will present high daily OPA treatment... so dosage determination it upwards on a recurrence of an EI program and entry into a writing table... pending batch OPA 10.4 at trigger/complete...and then read results in application pages PeopleSoft HRMS 9.1 since output table seems the way to go...
  
  I would be grateful to talk to someone who has followed this path. Thank you

  IB = Integration Broker.
  If you can fix or improve the separate question of the slightest error of IB then the web service call (determination server) should give you the performance you need, based on the volumes that you mentioned.
  Otherwise, you could look on the applicability of your page PeopleCode using Java to make a direct call to the engine of determination (and without going through the IB).