spam - the spam setting does not eliminate these

Similar Questions

• Cannot play bigfish games - your video card setting does not match the minimum system requirements: at least 2048 x 2048 DXT1 & dxt Texture size

  Original title: I have a computer toshiba M30 laptop and I'm on windows7. problem is that I can't play at bigfish games?

  HI the error I get is: your video card setting does not match the system minimum requirements:

  The size of the texture at least 2048 x 2048 DXT1 & dxt5 Texture formats support of the target.

  Thank you Joe

  Hey Joe,

  Thanks for the post.

  We need a few more details to help games play question, please answer the following questions.

  1. is this problem limited to Bigfish?

  2 do you have any problem with other games?

  You will need to install a graphics controller (video card) which can meet these minimum requirements.

  You can go through the following link; who helps update the graphics card, this could solve the problem.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download and install the latest display driver by downloading from the website of the manufacturer of the computer.

  http://support.Toshiba.com/drivers

  I hope this helps.

• When I uninstall an application virtualized with ThinApp does not eliminate the root folder, any suggestions to fix this?

  When I uninstall an application virtualized with ThinApp does not eliminate the root folder, any suggestions to fix this?

  Can you try to change the shortcuts = active on all entry Points setting?

  Change of Shortcuts=%Programs%\Check Point\Identity Shortcuts=%Programs%\IdentityAgent Agent

  In this way, we can see if it's the second folder level do. Because when I use only one file, I don't get the issue you reported.

  Out of curiosity:

  It is a Security Check Point Software? What is doing? It works like a ThinApp package?

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Trying to convert a trial to paid membership, but the payment gateway is showing the location in India and in Indian currency. I am based in the United States have changed in the account setting too but the gateway payment does not seem to be change

  Trying to convert a trial to paid membership, but the payment gateway is showing the location in India and in Indian currency. I am based in the United States have changed in the account setting too but the gateway payment does not seem to change.

  Hi Khushboo,

  On the bottom of the page of Adobe, you will see an option to change the region, make sure that you have the United States he and on the purchase page to change your currency to the U.S. dollar as well.

  Let me know if it helps.

  Concerning

  Sarika

• My player does not allow me to sign a document.  The security setting says not authorized for signatures.  How can I change the security allowed?

  My player does not allow me to sign a document.  The security setting says not authorized for signatures.  How can I change the security allowed?

  You can not. You must have Acrobat and the file password - change for this.

• The specified service does not exist as an installed service

  Recently I seem to have problem with every thing in my laptop under windows vistas. When I try to open any program such as device 1 Manager) 2) install/uninstall any program 3) manage computer 4) remove a printer, etc., it gives only the error "the specified service does not exist as an installed service. I am unable to set something good with my computer. the system tray has the error "The Audio Service is not running". The windows update is on and its updates up to today date from the. I can't even install the 'Active X' in IE8.
  Even when I open MS office like word or execl program opens a file, but it takes 5 minutes to get active average as it opens, it gets busy. We can open other programs, but not MS office program.

  Good advice to set this right. Thank you and best regards.

  Hi Dilippatel,

  A. when it last work very well?
  B. recent changes made on your computer?
  C. who is the manufacturer of your computer?

  Try the following steps.

  Step 1 : clean boot

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

  1: perform a clean boot
  2: enable half the services
  3: determine whether the problem returns
  4: enable half of the startup items
  5: determine whether the problem returns
  6: solve the problem
  7: reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode. Uninstall or update the program that is causing the problem.

  Step 2:

  1. click on start.

  2. type regedit in the search box start and press to enter.

  3. navigate to the location:
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BBBFC1-08002BE10318}

  4 remove the LowerFilters value in the right panel. (NOTE: under the key, it)
  are also some sub keys for example 0000, 0001. Please, double click it and remove the
  LowerFilters value.)

  5 restart the computer and check if the problem persists.

  Important this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  Try these steps and let us know the result.

  Please post you rquestion in the discussion group of the Office for issues related to Microsoft Office.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

  Re Windows XP: At the opening of the hearts, the window is very small.   How can I increase the window to fill the screen.   Double click on the top panel does not work.

  Hi Rosa,.

  The size of the window for Hearts is actually design in Windows XP.

  However, there is a solution. You can follow these steps:

  
  Step 1

  a. first of all, copy the game.

  b. click Start, all programs, games.

  c. right-click on the game of hearts .

  d. Select Properties from the list.

  e. press the button find the target on the next window.

  f. right click on the highlighted file and select copy.

  g. then paste the copy on your desktop.

  h. right click on your desktop.

  i. Select Paste from the list.

  Step 2

  Finally, we will change the resolution for the game setting:

  a. right click on the game you just pasted on your desktop.

  b. Select Properties from the list and click the Compatibility tab.

  c. put the check box marked "run in 640 x 480 screen resolution.

  d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

  Hope the helps of information.

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• "The specified domain does not exist or could not be contacted" then tried to connect to Windows

  Original title: could not open a session after computer F8\Repair selection

  Running Vista Home Prem

  Dell Inspiron 1501

  No Cd MFG.

  I have recently been struck by application pretty nasty virus/malware and want to do a factory restore. The problem I have is that when I select the option to repair through F8 at startup I get to the logon screen and all it shows is 'another user' in the way witness name of user/pass fields.

  I tried every possible user and the user/pass combo I could find and think. Every time I have enter a value in these fields and try to connect, I get the message "the specified domain does not exist or could not be contacted", if I try to log in without putting information in the field I get a msg of windows security saying that I have a user/pass to open a session.

  I looked in all possible aspects of user accnts, changed the need to open a session, deleted all passes, gave full control to all parts of windows and I still get the same screen.

  I need to know if there is a way around this or if the virus has changed the aperture setting of session for the repair operation? Also, if someone could tell me what measures the system and what files it loads when you browse the F8 repair op.

  Anything you could tell me would greatly

  Thank you

  Running Vista Home Prem

  Dell Inspiron 1501

  No Cd MFG.

  I have recently been struck by application pretty nasty virus/malware and want to do a factory restore. The problem I have is that when I select the option to repair through F8 at startup I get to the logon screen and all it shows is 'another user' in the way witness name of user/pass fields.

  I tried every possible user and the user/pass combo I could find and think. Every time I have enter a value in these fields and try to connect, I get the message "the specified domain does not exist or could not be contacted", if I try to log in without putting information in the field I get a msg of windows security saying that I have a user/pass to open a session.

  I looked in all possible aspects of user accnts, changed the need to open a session, deleted all passes, gave full control to all parts of windows and I still get the same screen.

  I need to know if there is a way around this or if the virus has changed the aperture setting of session for the repair operation? Also, if someone could tell me what measures the system and what files it loads when you browse the F8 repair op.

  Anything you could tell me would greatly

  Thank you

  Hey

  link below has the dell way they do a reinstall of recovery

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  If you continue to have problems with it contact dell

  There is also a support link for dell at this link of recovery

  It's their recovery process

  Walter, the time zone traveller

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot migrate VM between 5.5 ESXi versions: the version of the product to the destination host does not support one or several CPU features

  We receive an error message that I am trying to make sense. I understand very well the notion of compatibility, CPU, CPUID, masking and so on, after working on a competitor hypervisor. However, this error seems wrong (or needs better wording) based on my understanding:

  Here is the message:

  ----

  A general error occurred: the version of the product to the destination host does not support one or several features of the CPU currently use by the virtual machine.

  Characteristics of CPUID level 0 x 1 'ecx' register are indicated with a '1' bit: x00x:xxx0:xx0x:x 000: x 0 11xx:00: 00xx:11xx

  ----

  
  

  This happened during the migration between two hosts ESXi with the same physical processors - in this case, a Westmere X 5650.

  
  

  The source host is on ESXi build 2068190 (5.5). The destination host is on ESXi build 1474528.

  
  

  The bits it seems to complain are:

  
  

  DTES64

  Monitor/MWait

  Cx16

  PDCM

  The punch line seems to be: "the product version of the destination host. However, I have trouble believing that support for these features have been added to ESXi between the two versions. If it were, VMware has been certainly silent about.

  For what it's worth, explicitly set us the CPUID masks in our virtual machines (no, CVS is not an option for us at this time.) This is the mask:

  CPUID.1.EAX = "00000000000000100000011001010001".

  CPUID.1.ECX = "00000010100110001110001000111111".

  CPUID.1.EDX = "10001111111010111111101111111111".

  CPUID.80000001.ECX = "00000000000000000000000000000001.

  CPUID.80000001.EDX = "00101000000100000000100000000000".

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Note that the bits of the message complains (2, 3, 14, 15) * are * in fact forced to '1' in our mask of cpuid.1.ecx. That means (if I understand correctly), ESXi does not have the virtual machine unless the host processor supports the feature. And in our case, the virtual machine will start with happiness on nodes, with both versions. It will be not simply migrate between them.

  So, long story short, is this a bug of ESXi? The error message is misleading? I understand something?

  Thank you

  
  Matt

  To use the masks feature VM in this way, you must replace all the 1 to your masks with-'s:

  CPUID.1.EAX = "00000000000000-000000 - 00-0 - 000-

  CPUID.1.ECX = "000000-0-00--000---000-000---".

  CPUID.1.EDX = '-000 - 0-0 - 0-

  CPUID.80000001.ECX = "0000000000000000000000000000000 -"

  CPUID.80000001.EDX = "00-0-000000-00000000-00000000000.

  cpuid.d.EAX = "00000000000000000000000000000000".

  cpuid.d.ECX = "00000000000000000000000000000000".

  cpuid.d.EDX = "00000000000000000000000000000000".

  Zeros erases the features that are not available on your hosts Westmere, and dashes will leave the other one features.  The problem with those masks was forced to you certain features on who would have normally been off.

• I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have

  I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have to re - the problems that I had fixed in the unique files. I need suggestions on what else can be done, if any. Using Acrobat pro XI.

  By habit, I tend to combine PDF files in the Page pane by right-clicking thumbnails then 'Insert of Pages'-> 'From File'. For me, this preserves the tags of these two documents, although the tags may have to be moved to the correct location (if I remember correctly the tags for inserted pages are put at the end of the tag structure, regardless of where the pages are inserted), if I put the tags in the document to insert into a container as a Section tag It makes the process easier. Travel set of tags in the right place is the only re-fixing that I remember having to do. What behavior you encounter?

  a 'C' student