speaker/mic giving muffled quality

Similar Questions

• BlackBerry Q10 speaker/Mic stopped working - I'm the only one? Help!

  Hello

  A few weeks ago the mic on "speaker phone mode" on my phone stopped working.

  Phone works very well in phone mode, but to try the speaker - a total nogo button!

  WTF and everything!

  For me, this is one of the most important features on the phone!

   

  Then I realized the microphone for recording videos has also disappeared.
  

  When I try to use it on the phone calls, looks to an endless loop.

  Here's what I've done so far:

  1 deleted all apps purchased for nothing.

  2. rebooted, restarted, pulled battery... nothing.

  3 reset the device... Yes, completely done... nothing.

  4. has tried to put in headphones, removing the headphones (seen this somewhere)... nothing.

  Someone at - it this?

  Am I the only one?

  Great thanks - love my Q10, but need the speaker (and return buttons!)

  Go to the App help click test and see if you can test the microphone. Of it fail the test, you will need to contact your carrier for warranty repair.

• Continuous sound with built in speaker, MIC works not, echo problem

  My computer dell laptop still makes a continuous noise (fifine) of his built-in speaker and the internal mic also does not work. Because of this, I have to keep the sound on mute. Help, please. In addition, please tell us how to solve the problem of the echo.

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  It will be useful.

• IPhone 5 s losing signal and MIC is muffled

  Hello guys,.

  My Rich Dad a 5s iPhone and it loses signal and muffled the sound when he talks about phone! Any solution before going to the apple service?

  Hello

  Try following the steps here in terms of sound not clear:

  Get help with microphones on your iPhone, iPad and iPod touch - Apple Support

  Follow the instructions in respect of the loss of cellular signal:

  If you cannot connect to a cellular network or cellular data - Apple Support

• C114nr stream 13: stream 13 What kind of speaker/mic jack? 4 conductor plug, tip and first ring = audio off 2nd pic

  4-wire plug,
  Tip and first ring = audio off peak
  2nd ring = mass
  Sleeve = input microphone

  Use the Note book please?

  I got everthing work!  The interface had hung and all is well. It's easy to dig for amateur RADIO (as seen on Ebay)

  and works between computer and radio to send digital messages. Similar to "cat".

  The problem is resolved. Thank you very much!

• Portege R500-11Z: how to use the external mic and hear the internal speakers

  We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

  When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

  How to use an external mic and still hear the internal speakers?

  Hello

  > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
  Are you sure you used the microphone port and no headphone port?

  Have you checked your settings Audio from Skype?
  There is an option called ring through the speaker too or something like that.

  Please also check the Realtek HD audio Manager in Control Panel.
  There is a tab called Audio i/o.

  Usually, you can change the connector settings, by clicking on the small key-tool icon.
  Disable the option called Mute rear output when plugged headphones before

  As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

  By the way; There is also a tab called micro.
  Check if the two options that reduce the echo and noise are OFF

• How to pass life cam blue built-in to my microphne yeti mic while recording with the lifecam software?

  I guess that this is still not resolved. I read about similar posts asking how to turn off the microphone. I have my blue yeti as default and works very well in the movie was I can choose what mic like camtasia studio8, but I would like to be able to record videos using the camera but we lifecam software my blue yeti mic. the sound quality is much better... So please dear microsoft tell us how to use another microphone or get your work of programmer and set the software if we have a choice as all the other programs don't...

  I thank you for your time and hope you will fix this problem

  Sincerely of William Kayser

  Hi William,.

  Since you use LifeCam hardware and software I suggest that contact Microsoft Hardware Support.

  Please see this link to find the support option at your disposal by selecting your region.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Thank you.

  We always encourage you to use the forum if you need help or have questions about windows.

• I also dropped my phone in water

  .... I dropped my phone in the water yesterday. I could not find a question previously posted with my particular problem but then there it goes.

  the phone was completely submerged. The screen was not at the time, and after having disconnected from the case and he wipe I could out safely. The screen turned on fine during the process. Immediately, I used a paper towel to absorb as much water as possible from the charging and the opening of speaker/mic. Fortunately, I had one of these charms plug in the mic input and keep it dry. Once the paper towels stopped showing visible signs of water I have wrapped it in a dry and stuck it in a plastic container with rice, covered completeky. It was last night at 730 pm. The container was not completely closed, the CAP was slightly unscrewed.

  This morning, I tried to put running at about 06:30. It worked fine, I was sending messages, I received a few alerts, my alarm clock rang, etc.. After five minutes, the screen went green full and began his studies through (changed to purple, then blue) colors. I immediately made off tough and I have since put back in the container except that now I closed it completely and will no doubt leave there for 48 hours.

  What are the chances of coming back? I burned the graphics card? If so is it easy to replace?

  the phone is unfortunately no longer under warranty and I never had insurance for him.

  Thanks for your time.

  Normally turn you off the coast, but in a bag of rice uncooked for 5 to 7 days.

  The water has probably damage your phone, if not now it will be done later the line.

  You can buy one out of warranty iphone on the Apple store.

  Water damage is not covered by Apple warranty.

• GPU AMD RADEON 7470HD 1 GB GDDR5 vs INTEL HD GRAPHICS 3000

  I just don't understand why the intel 3000 much more better than my discrete graphic card graphic AMD Radeon HD 7470, I use a dynamic mode here and I can simply compare the quality vs high performance thing. A good example is I open and play NBA 2 k 12 and it seems that the Intel HD graphics card gave a lot more 'PERFORMANCE' and 'QUALITY' of the game when I changed my GPU to save energy, even if I change the settings of the graphics card Intel for its 3D preference by fully optimizing the 'QUALITY' to 0% Performance It gives even more performance + QUALITY in my NBA 2 k 12 compared to my Radeon 7470HD I've also changed the 3D settings to much higher Performance of 80% and 20% of quality. I always found kind of GALs of the graph + giving poor quality makes me inconvinient to use.

  Another thing that was when I tried to change my GPU fixed dynamic mode, and this passage from the high-level sport gives less total aprrox. memory of the "dxdiag", he gives only 786 MB when it is in the type of energy-saving, it gives more its total 1 600 MB memory Aprrox.

  IS THIS A PROBLEM FOR MY GPU CARD? I'LL BE HAPPY TO ACCOMMODATE ALL OF YOUR OPNION OF THESE. Thank you!

  Why is your memory Intel more your AMD brief, who knows, I can tell you that in the information---> components---> display system, is my HD 6770 m ~ RAM 1.00 GB (1 073 741 824 bytes) and Intel adapter is ~ bytes of RAM adapter (1,335,959,552), maybe you should check there.

  You can believe me or not (you can take a horse to water, but you can force it to drink) why I believe you get better performance with processors intel compared to the Radeon, this is because the software beast of switching does not work, be said. You don't believe me search this forum you will find enough post where the owners of laptops with switchable graphics are looking for help with graphics there.

  Man, I do not see why you just don't try by yourself, if it doesn't work for some reason, or you still believe that the graphics card intel play better change it back, it's not permanent, there is no reason for you to procrastinate.

  You say that you want to use Intel to play a game and AMD to play another, what's the problem, what you need to do is right click on the desktop and switch from one to the other and vice versa if necessary or is it too difficult for you to understand. You can't play two games together, so I really don't know why you would even mention it.

  FYI the only time where I never use power saving mode is when I am on battery, I have my bet on high performance, really how much money will save you in a year of use of a laptop computer if you switch from high-performance, energy savings depend on what you use your laptop for a little money, not even enough to buy a Merry feast at Mcdonalds?

  Man, I'll tell you once and I'm outside here, being able to save those who the game is crazy, those who build platforms of games can spend hundreds of dollars to purchase blocks of power to get as much power as they can in their computers, because it takes a lot of good gaming power, and energy saving are you talking

• Is there a way to interrupt the sounds on 8610 all-in-One?

  The sound (for bumps and flourishes when it turns on or off, etc.) on my new 8610 is so tinny and distorted that I prefer to do without.

  Is there a mute option anywhere? Or a way to disable the speaker of very poor quality?

  On my fellow Officejet Pro 8600 it is defined as follows: on the front panel click home, and then right arrow, configuration, preferences, effects Volume.  At this point, you can select sweet, high or Off.

• Reference Dell place 8 (3840) is ready? Wish list?

  Hello

  I see a new benchmark for product here.

  One thing is maybe not good for us. Processor... because you use intel atom z3480... but the new processor update is available intel atom z3580... it's much better above processor.please replace your processor intel atom z3480 with intel atom z3580.

  A THING IS should BE of 2 GB or 3 GB of RAM.

  HERE IS DETAIL COMPLETE.

  Please increase the capacity of the battery until 8000mAh with Adapter Cable.

  Before camera should be 8 Megapixels and back must be 13 megapixels.

  Body must be anti hernia - like ASUS MEMO PAD.

  Micro HDMI Port should be included in the new meeting place for update 8 Android Tablet Version.

  Speaker should be of quality high-end for Sound.Previous Dell 8 3830 place is not so big normal speaker.

  All your post have been merged into one post. Send your wishes for the product Dell on IdeaStorm.

• Classic BlackBerry what may be the end of the road for me and BB...

  first thing first. My classic is not yet two years old and it was very expensive.

  Ive had only bb for years and years, my favorite by far.

  TMobile can't bb.

  TMobile sells more bb.

  same bb sells more classic.

  Facebook has pulled his app so now I have no facebook.

  half of the speaker/mic stopped working months ago, no one can fix it.

  the software of bb (tons and tons of it) cost me a LOT of bandwidth at home, had to uninstall it. man, I had no idea until my ISP told me. It was really bad.

  now texting niot work. I have already crossed tmobiles * support * still does not work.

  I try to text someone, sometimes it allows me to enter text, sometimes it only allows me to enter text. He sends some soetimes more often than otherwise the message will just totally disappear.

  Oh and im still paying the phone is off.

  Hey @xlaurenstephens answering your tweet.

  I understand your frustration. We need more information.

  1. What is your operating system loaded on your device? From the main screen, drag to the bottom of the black bezel that is superior to the settings > everything... What is the Version of the OS that there are listed?

  2. have you restarted your Classic lately, or how many times? Do it. One or both as shown below.

  Restart: With the BlackBerry powereddevice, press and hold the power button on top about 20-30 seconds, ignore the 3-2-1 timer and hold the button until the screen goes black and you see the red LED.
  or
  Restart: With the phone smart BlackBerry turned on, using the keys of volume of the edge side, press on and hold the keys of volume for about 20 seconds and both of the Up, ignoring the initial message of screenshot... the screen go black, reboot.

  After either of the above process, wait about 5-6 minutes after restarting a household with the device, let data synchronization and settle.

  3. find the 3-4 most text threads, these are some who you text presenting most often and remove these threads text completely and restart again as described above. This should really improve your text problems.

  4. on the microphone and the speaker, what makes you think half does not, of each?

  I have no idea on the issue of software data. Which will cost you to uninstall what? Can you be clear in explaining what you mean or what you were doing. What you uninstall?

• Does not burn a disk...

  I've completed a project, define all the markers and the menus, made all the files, etc.  Began the process of engraving and after about 15 minutes, it stops working and open the burner with this message in the public viewing area of actions:

  I can't see the whole of the message that the program remains frozen for another 5 minutes, then the "does not"message. "

  Photo below reads as follows: operating system error: 0 number x 00000020 - the process cannot access the file because it is _

  

  Burned several projects in the past with no problems, now, this has happened twice in a row, what gives?

  This FAQ entry lists the notion of "small projects" as a work around IF his computer is underpowered. Your should not be.

  I can easily produce a 2 hour DVD-video on a laptop computer, with much lower plug. name of your computer.

  Now, scaled too large still Images are likely to be very useful. Even on a fast computer, dealing with loads of unused and useless pixels, in large still Images, you will always present a problem of resources. There is nothing to gain and much to lose, by importing too big project of still Images in a DVD-video (or even comic).

  One thing that you might consider, when the scaling of Images again to use in a DVD-video, would be to make the Save_As and use the PSD Photoshop native format, rather than the common and popular JPEG format, which compresses the Image, with a certain degree of loss of quality. If the PSD in Photoshop will be larger files, pre can treat them beautifully. As we're already giving up quality, go just DV 720 x 480 (NTSC), adding even a slight loss of quality of JPEG compression, is something I want to avoid.

  Good luck

  Hunt

• The speaker on my iPhone seems to be blown out and suddenly the muffled sounds and very low quality.

  The speaker inside my iPhone seems to be blown out and smothered. The quality is low and seems to not be as strong as before. Are there ways to solve this problem or replace the speaker inside the phone?

  < object edited by host >

  Try troubleshooting help here > If you hear no sound or distorted sound of your iPhone, iPad or iPod touch speaker - Apple Support

  If nothing helps, check your warranty coverage > https://checkcoverage.apple.com

  The iPhone may need repair > repair - official Apple iPhone Support

• HP 15 au006tx: very low speaker quality I can't hear anything

  Hello.. I bought a new computer hp laptop for 2 months... My laptop works properly... But the speaker is of very poor quality... If I here all important videos I can not here anything from here... The quality of the speaker is very low worm... very bad... If I put a full volume, it's just like a normal sound otherwise very bad sound... I need a good solution... Please help me what I have to do?

  In fact I need DOLBY speakers to my laptop... If possible could I change my B & O Dolby? How do change?