SPEAKER Setup D110 cable: USB cable request

Similar Questions

• Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Hello

  It is possible in some cases - Adpater, power and the ability to read the disc
  are the issues.

  Check with the manufacturer of phone and the USB key and their forums.

  How to: use your USB with the Nexus 7 [root]
  http://www.androidcentral.com/how-use-your-USB-flash-drives-nexus-7-root

  For phones Windows ask in this forum and check the support.

  Answers - Windows phones
  http://answers.Microsoft.com/en-us/WinPhone

  For other phones check with their Support and Forums.

  Support of SanDisk and Forums (and others) would be a good source of info.

  SanDisk - Support
  http://www.SanDisk.com/SanDisk-support/

  SanDisk - Forums
  http://forums.SanDisk.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Speaker Setup

  Hi, recently bought new speakers - Creative Zii T6 Sound.  After hang everything up, including bluetooth, it shows as connected.  The problem is that Windows 7 has decided that the speakers are stereo and does not give the opportunity to surround 5.1 (which is said to use Creative). Setting up audio options has been defined by Win 7 stereo (audio playback / [3 Creative Bluetooth Audio D1] / Configure).  Therefore I am deaf bass and practically nothing out of the satellite speakers.  The sound card is not the problem because my old sound system was of 5.1 and worked perfectly. I need to be able to change the audio channel but do not have the opportunity to do so.  How to get around this please?

  Hello
  Note: in order for the 5.1 speakers work properly and if a third additional sound card is installed, the audio driver must be installed and setting should be managed via the interface of the driver from the manufacturer.
  Method 1
  Step 1
  To run a sound, resolution of the problems of reading click on the fix it the link below.
  http://go.Microsoft.com/?linkid=9740814
  Step 2
  
  To run a hardware and troubleshooting features, click the difficulty he link below
  
  http://go.Microsoft.com/?linkid=9740816
  
  Method 2
  Follow the steps mentioned below to configure your speakers:

  1. Open Audio devices and sound themes by clicking the Start button, click the Panel, clicking noise.

  
  2. click on the playback tab, select speakers, and then click Configure.
  
  3. under Audio channels, select which speakers are present in your speaker configuration, and then click Test. You should hear a tone play in each speaker. Click next and follow the instructions to continue the Setup process.

  Use the Speaker Setup Wizard to help get the best sound from your computer.

   
  
   
  See the mentioned link below for more details:

  Get high definition sound and music from your computer

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-high-definition-sound-and-music-from-your-computer
  I hope this helps.

• Qosmio G20 to Mini HiFI Stereo Speaker System AV cable

  Hello

  When I connect my Qosmio G20 to my stereo using the AV cable (with jack white, yellow and red) and my Qosmio includes a cable that joins this cable 3 to the line of the laptop for the helmet.

  The problem is, it only sends the sound to a speaker if I swap the cable then any other speaker works and the previous No.
  I've tried installing speakers / two speakers on the options here and nobody done work.
  I tried another set of audio/video cable and it is the same question.
  This configuration works correctly if I connect it to the TV, but not on my stereo system.
  Do I need a different cable?

  See you soon

  Hello

  Are you sure you have connected the straight plugs at the HiFI?
  You receive a stereo sound will have to connect only two sheets: RED and WHITE.

  I ve also connected my phone to the stereo via a cable 1-2: a plug for headphones and 2 plugs (left, right) to the stereo.
  Everything works beautifully.

  Oh I remember that my HiFi supports a controller at the rear to assign the sound to the left or right speaker.
  I put it at intermediate level for both speakers.
  Maybe it's the same on your HiFI

• Printer maybe Setup connects through USB and wireless printing? or either one or the other?

  I would like to connect my printer to the since my MAC using a USB cable and also be able to use the wireless printing functionality without having to reconfigure my printer.  Is this possible?

  I have a Photosmart 7520

  Hello

  All my tests were using Windows, but I think we can do it for Windows why not Mac. It takes config of the printer as a wireless printer (IE to connect to a network) and install drivers, or applications on OTHER computers and mobile devices.

  Kind regards.

• can not find D110 via USB or network

  Need help to reinstall a printer. I have a x D110. It's worked great for months. Now it stopped connecting to the network. I can't even install or be recognized via USB. I tried on several computers and several USB ports on those same computers. I know the wireless network works like this post is done from a computer connected wireless on the same network. I've got machines Mac and Windows in my network and none of them I would like to install and configure the printer more. I have powered off the printer several times, checked the ink and paper levels, set up wireless several times. Don't know what else to do. Thoughts from the smart people here?

  -Scott M.

  I guess that the Time Capsule is in Bridge mode and the Dlink manages all DHCP?   May directly connect with the Dlink to establish a connection, then move it close to the time Capsule and he will restore?  Set a static this IP address when you are connected to the DLink.

• construction Setup error: this application has requested the execution to terminate in an unusual way

  Hello

  I'm building an appliction using LabView 8.2 with Report Generation Toolkit for MS Office V1.1.1 on a WinXP SP3 system without any error. When I try to compile a coresponding Installer, I got the following error message:

  This application has requested the execution to terminate in an unusual way.

  Can someone help me?

  Hi Gunnar

  First of all just save the contents of the disk on your computer. Then...

  The local cache paths are stored in the registry keys.  You can change the registry in the following steps:

  1. Select start > run and enter regedit
  2. to create a backup copy of the registry, select file > export from the Registry Editor window
  3. make sure that the export range is set to all and back up the registry
  4. navigate to HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\Common\Installer\ProductCache, find the right key and change the path as necessary

  Hope this helps,

• USB controller requests a driver when it does not require one.

  Akai APC20 (requires no driver) when it is connected, I was invited with the window which requires a CD to install drivers, I plugged the same device in another operating system and it installed fine. What's wrong?

  Hi LewisCochrane,

  Update the computer with the latest chipset drivers. Log computer manufacturer site to do so. In addition, make sure that you have the latest windows updates installed.

  Updated a hardware driver that is not working properly

  Install Windows updates

  You can also read the following article and check if it helps:

  Tips for solving problems of USB devices

  Hope this information is useful.

• When I try to set up my cable tv that asks me to install an IR cable. Why is it necessary.

  When I try to install to the top of my digital cable, I am required to have infrared cables.

  can I set up my computer with a digital cable without these?

  Thank you very much for the help.

  I have a hp pavilion with windows vista.  When I try to start the computer at a given time cable via the media center TV asks for the IR cable.  If they're not I can't continue through Setup of cable television.  I do not have so much and so well I can't enjoy my cable service.  do I have to have these cables to run cable television?  What should I do?

• HP r033tx: could not find the usb modem Setup

  Setup of the usb modem does not anywhere on my laptop r033tx,

  This usb device works properly with other laptops in the folder "my computer", it's to show as disk removal and after double-clicking on its projection 'Please insert a disc into this drive.

  It's also show "device and printer" in the control panel and its properties is tellieng 'thi peripheral works properly.

  So what I need to do to get this usb modem Setup

  Deveshh wrote:

  Setup of the usb modem does not anywhere on my laptop r033tx,

  This usb device works properly with other laptops in the folder "my computer", it's to show as disk removal and after double-clicking on its projection 'Please insert a disc into this drive.

  It's also show "device and printer" in the control panel and its properties is tellieng 'thi peripheral works properly.

  So what I need to do to get this usb modem Setup

  Also if there is no driver for your Win8 then you won't be able to use it. Also more recent laptops Win8 one is no longer a Modem port anymore. So unless your USB modem factory has Win8 drivers for this USB Modem, you won't be able to use it.

• Setup runtime error driver Photosmart C4780

  I bought the new desktop computer Dell with Windows 8.1. Have C4780 printer used with XP.  Local use rather than network or home group. Connected the printer directly to the printer.  Regardless if WiFi enabled or disabled.  8.1 Windows recognizes the printer on the list of devices, but offline.  Problem is driver needs.  I tried several times to download the driver on the HP site but came to the top with many problems. Windows Update does not work even though my printer is on the list.  Finally, succeeded to download the software/driver for Windows 8.1 64bits (checked and that's okay). Ran hppiwexe.  Then ran HPInstallerSetup.exe application.  After it extracted I get a runtime error "program C:/Users //AppData/Local/Temp/7zS7723/setup.exe this application has requested it in an unusual way." Please contact support team of the application for more information. "What should I do now?

  I solved the problem. I visited my local independent computer store repair and maintenance and told them about the problem of the printer.  They proposed several possible solutions. (1) be sure that the printer was plugged into a USB 2.0 port, and not a 3.0 port. (I had plugged into the port 3.0).  (2) the computer might already have a Microsoft driver for the printer.  I'll just have to find it. (Was still not sure how). (3) download the driver manually (I don't know how to do this).

  After tweak again and leads research on Google I came across a statement on the parameters of HP network device support, but with a different version on Windows.  I have cliced the start options, one of which was Device Manager.  I clicked on Device Manager, printers selected, then my printer has been listed as a subset and clicked that.  Make a right click does appear some options, including the update driver software.  I clicked on it.  Then click search automatically for updated driver software.  He did his thing... ended with a statement that it was loaded successfully.  I tested the printer... and it worked!

  I assumed that this was the pilot manually download approach.

  Thanks for your help!

• Connector USB Type C on Aspire E5 - 575 G-53W3 is really a 10 Gbit/s USB 3.1 Gen 2 or only 5 Gbps USB 3.1Gen1?

  Speaking of 'Type C USB 3.1', the port could be 10 Gbit/s (USB 3.1 Gen 1) or 5 Gbit/s (USB 3.1 Gen 2).

  Well, due to marketing purpose if it's really Gen 2, that's were obviously assert as Gen 2 however.

  Which is that of the Aspire E5 - 575 G-53W3?

  Hello

  According to Acer specifications: type C of USB: USB 3.1 Gen 1 (up to 5Gbps).

• make a bootable USB key

  When you try to perform the last step in manufacturing a key USB bootable - changed to the startup directory and enter the following command >

  G: C:\boot\bootsect.exe/nt60

  The error I got was "could not map the partitions of drives to the associated volume device objectives access denied" Please provide assistance so that I can make a backup.

  Thank you

  Hello

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If you want to make a Bootable USB to reinstall that is different:

  This can help you (download files and make your own DVD, etc.).

  Vista ultimate is available. Read the information in the lower part of the message on how to use it for other editions of Vista:

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  See you soon.

• WRT610N updated firmware, USB hard drive no longer works

  Hi all

  Thanks in advance for any help you may have.  I noticed a few people have had this problem, so maybe there is a difficulty.  I updated the firmware to Ver.1.00.02.10 because the release notes, said that it had improved the function USB hard drive.  I've updated the firmware, which is is held reset, pedaled power button, restored my setup, replugged my USB drive & lit.  I am still unable to access the USB drive.  It shows not only upward.

  My hard drive is a Maxtor One Touch 750 GB, works perfectly when it is directly attached.  I have 2 PC (one connected via gigabit and either through N), both works very well.

  Any thoughts?

  Thank you so much in advance.

  -Tim

  When you upgrade the firmware of your router, you must reset your router and reconfigure the settings on it once again, do not restore the Configuration of return still file once on your router. Just reconfigure a fee net settings on your router. That might solve your problem.

• Flash Access Setup Manager Wizard

  I installed CentOS 5.6 and downloaded tomcat 6.0.32, all operations manual, point 4.1 to 4.7 working, the server is on ip 10.4.80.21, when I check my windows http://10.4.80.21:8080 / flashaccessserver, flashaccess, license, v1 I see:

  License Server is setup correctly.
       Total successful requests = 0 requests in 0 ms.
       Average response time = 0 ms. Average throughput = 0 requests per sec
  
  
  
  Now i do step 5, 
  
  copy Reference Implementation\Server\resources\ to /usr/tomcat/resources, in catalina.sh i set :
  
  CLASSPATH="/usr/tomcat/resources/flashaccess-refimpl-packager.properties"
  
  in 
  /usr/tomcat/resources/flashaccess-refimpl-packager.properties
  
  i set config.resourcesDirectory="/usr/tomcat/resources"
  
  copy flashaccess-packager.war to /usr/tomcat/webapps
  
  i downloaded last version of AIR on my windows and installed flash accessmanager.air
  
  i restarted my tomcat, in log i have :
  
  2011-08-02 14:52:26 org.apache.catalina.core.AprLifecycleListener init
  INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: /usr/java/lib/i386/client:/usr/java/lib/i386:/usr/java/../
  2011-08-02 14:52:27 org.apache.coyote.http11.Http11Protocol init
  INFO: Initializing Coyote HTTP/1.1 on http-8080
  2011-08-02 14:52:27 org.apache.catalina.startup.Catalina load
  INFO: Initialization processed in 1743 ms
  2011-08-02 14:52:27 org.apache.catalina.core.StandardService start
  INFO: Starting service Catalina
  2011-08-02 14:52:27 org.apache.catalina.core.StandardEngine start
  INFO: Starting Servlet Engine: Apache Tomcat/6.0.32
  2011-08-02 14:52:27 org.apache.catalina.startup.HostConfig deployDescriptor
  INFO: Deploying configuration descriptor host-manager.xml
  2011-08-02 14:52:28 org.apache.catalina.startup.HostConfig deployDescriptor
  INFO: Deploying configuration descriptor manager.xml
  2011-08-02 14:52:28 org.apache.catalina.startup.HostConfig deployWAR
  INFO: Deploying web application archive flashaccessserver.war
  2011-08-02 14:52:29,602 INFO  [com.adobe.flashaccess.server.license.engine.LicenseEngine] Deployment root: /usr/tomcat/licenseserver
  2011-08-02 14:52:29,615 INFO  [com.adobe.flashaccess.server.license.engine.LicenseEngine] Log root: /usr/tomcat/licenseserver
  2011-08-02 14:52:29,696 INFO  [com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory] Unable to initialize the PKCS11 key store factory. If PKCS11 is to be supported, please ensure 'pkcs11.cfg'
  2011-08-02 14:52:30 org.apache.catalina.startup.HostConfig deployWAR
  INFO: Deploying web application archive flashaccess-packager.war
  2011-08-02 14:52:30 org.apache.catalina.startup.HostConfig deployDirectory
  INFO: Deploying web application directory ROOT
  log4j:WARN No appenders could be found for logger (com.adobe.flashaccess.refimpl.packager.RefImplPackagerServer).
  log4j:WARN Please initialize the log4j system properly.
  2011-08-02 14:52:30 org.apache.catalina.startup.HostConfig deployDirectory
  INFO: Deploying web application directory docs
  2011-08-02 14:52:30 org.apache.catalina.startup.HostConfig deployDirectory
  INFO: Deploying web application directory examples
  2011-08-02 14:52:31 org.apache.coyote.http11.Http11Protocol start
  INFO: Starting Coyote HTTP/1.1 on http-8080
  2011-08-02 14:52:31 org.apache.jk.common.ChannelSocket init
  INFO: JK: ajp13 listening on /0.0.0.0:8009
  2011-08-02 14:52:31 org.apache.jk.server.JkMain start
  INFO: Jk running ID=0 time=1/61  config=null
  2011-08-02 14:52:31 org.apache.catalina.startup.Catalina start
  INFO: Server startup in 3883 ms
  
  when i check again from my windows http://10.4.80.21:8080/flashaccessserver/flashaccess/license/v1 i see :
  
  License Server is setup correctly.
       Total successful requests = 0 requests in 0 ms.
       Average response time = 0 ms. Average throughput = 0 requests per sec
  
  still is ok, so i check manager on windows, i run it and in field Packager Server URL i set http://10.4.80.21:8080/, close aplication and run again, on start i have screen with message :
  
  FAULT
  Cannot populate packager preferences.
  HTTP request error
  Packager Server may not be running at specified location
  
  What i missed or doing wrong ?
  

  
  

  Perhaps the problem is that the server packaging (flashaccess - packager.war) can not find flashaccess-refimpl - packager.properties.  Instead of setting your classpath "/ usr/tomcat/resources/flashaccess-refimpl-packager.properties", please specify the folder that contains the property file: ' / usr/tomcat/resources. If you still see the same "cannot fill preferences Packer', error please check the logs on the server to see if there is additional information about the error.