Specialist of the aquarium looking to trade aid to the rescue with a video montage online or phone or support of aquarium Local of NYC

Similar Questions

• Can not play any YouTube video or even get YouTube to the charge with any video

  If I try to load videos hosted on YouTube, they won't charge, they will not show even a placeholder to show that something should be there. If I go on YouTube, the site does not load with any video. All I get is a list of links to subscribed channels and my account and all these nonsense, nothing that looks even remotely like a video. This occurred only since 28 beta 2 has been installed.

  If you use extensions (Firefox/tools > Modules > Extensions) which can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that these extensions are not blocking content.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• The point on the compatibility of the browser with HTML5 video and mp4s?

  I currently have a mp4 video on my site, and the video is currently hosted by YouTube. But I would like to move it to our web server using the HTML5 video element. So far, pretty simple:

  < div id = "videodiv" >

  < src = "videos/video my_video.mp4" control width = '100% ' > < / video > "

  < / div >

  What I read, I was ready to provide alternative (webm and ogg) formats, but I tested it with Firefox, Chrome and IE10, and they seem to all work. I do not have to provide three versions of the video, because it is a precursor to a 8 added more videos to our Web site. The browser world all got on board with mp4 now, or do I always have to provide alternatives?

  Thank you

  http://techslides.com/demos/sample-videos/small.MP4' type = "video/mp4" >

  If you don't see this, you are using a

  outdated browser that does not support

  the video tag.

  All modern browsers now support MP4.  Not so a few years ago. So we used relief WEBM and OGG.

• Hi all! Is it possible to show the caller with a video ID?

  Hi all

  My problem is that, suppose someone calling me and at the same time I want to see the CALLER ID and video. Please let me know if it is possible or not blackberry, if possible, how can we do?

  Your views will be highly appreciated!

  Thank you very much!

  Mahendra Singh

  Hi Simon,.

  You mean, we show a video as well in a predefined area of the screen and identification of the appellant by remaining part of the screen.

  Thanks a lot again! Simon, you were the first person here on the BB forum, who greeted me!

• Stabilization of the project with different video settings

  If I open the project with the settings for video 1080 p and then add 720 p video, how can I make stabilization for her? (When I opened a video with different sequence settings it me does not make stabilization)

  Is it possible to work in a single sequence with different settings of the video?

  Images that do not match the nest of parameter sequence first, then add the string.

• Export the clip with no video, audio only and keep the timecode

  I have transcribed for a documentary film clips. There are many of them and my transcribers using a program that can use the timecode of audio and video files.

  We are Dropboxing so I want them to be just audio files, but I need the timecode to stay on the clips when I export the audio.

  So far he strips and all I get is life.

  The original videos are in. MTS format. They import in first CC very well, but when I export the audio the initial timecode disappeared.

  The other option would be to compress the video and the watermark, but the time code disappears when I do that too.

  I think that I get it.

  You want just the files as small as possible. Right? That's why you just want audio?

  Well, rather than do without the video completely, just to reduce the flow of something terribly weak, where the video is barely able to be seen. You want to export to a format that the program can handle, like Quicktime. But where I could export to 25 Mb/s, you might be able to export 1 Mb/s. The video will look terrible. Well, so what? Who cares? Right?

  But there the timecode.

  When their web page says they can accept different audio formats, I don't think they hear audio by itself. They mean that the audio in the video stream may be audio AIFF, WAV, AAC and MP3.

• call the problem with ip video phones

  Hello world

  We have a video infrastructure where

  (1) vcs control x7.1

  cucm 2)

  (3) SME session manager edition

  call flow between endpoints

  video endpoint-> control->-> cisco cucm area vcs session manager-> cucm-> cisco iphones edition

  facing problem

  (1) while the call to the ip video endpoint phones video, he shows is not the E.164 no (caller ID)

  audio/video 2) not received when calling video endpoint video ip phones

  attached are the newspapers of vcs xstat and vcs xconfig

  Rashmi,

  No problem. If possible mark the thread as answered

  Thank you

  Alok

• the issue with ME

  I have 100 sequences from 3 minutes to the Premier Pro, I need to export, I have usually run it via Media Encoder from one day to the next but pose with transitions and keyframes (for example in the blur effect) restores do not smoothly. When I export by the Prime Minister, it is absolutely perfect. The setting is exactly the same. But when I export it through ME, the fades and transitions between the effects (in particular the Gaussian Blur) doesn't run as smooth as it should. I experimented with a few different settings, codecs and searched the Internet without success. I don't want to first export directly because I will need to do the same with 100 videos in the future. All my software is up-to-date.

  
  

  I know there have been problems with Media encode recognizing the effects of the lumetri, etc., but this seems to be something different.

  Can anyone help?

  
  

  Thanks Ash

  In the SOUL, go to Edition > Preferences > general and turn sequences natively import.

• CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 does support OpenCL and OpenGL?

  Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

  Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

• How can I change the cadence of my videos?

  I need help with a video montage of the Premier Pro! I shot at 60 fps footage and would like to adjust the rate of 30 frames per second for my images is to half speed. How can I do this? Thank you!

  Hello

  After you import your footage into PrP, go to the images tab project and right click on one of them. You should see Modify_ then interpret the film. There you can adjust the frame rate.

  Pete

• in Firefox can not see the window of downloads, specialist of the jump in the trunk to be saw - the speed downloaded a lot and now can not see how to fix it?

  in Firefox can not see the downloads window, specialist of the jump in the trunk to see - the download speed
  Downloaded a lot and now can not see how to fix it?

  The download Panel has been moved to the upper right corner with a circle arrow down. You can also visit on: downloads of your browser to visit all your downloads.

• I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help?

  I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help

  Try to drag the image to id web site (favicon) on the left side of the address bar, instead of the URL.

• Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now

  Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now and the best advice seems to apply to CC 2014 and has to do with installoing a previous version (CS6) of the Prime Minister - but seems not to apply to the CC 2015... HELP - I have plans to burn and don't want to go to third-party software (if I do I'll ditch CC because it won't let me complete my work on a DVD!) @.

  Hi Matt,

  I found this link corresponding to your query, please see if it helps: CS6 still not installed with creative cloud

  Kind regards
  Rahul

• Windows 8.1 in Adobe Illustrator, I tried to copy my design &amp; tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appeara

  Windows 8.1 in Adobe Illustrator, I tried to copy my design & tried to paste it, but after sticking the image (file), now the color looks different, drive and lighter. So, kindly inform how to paste the file with 100% same resolution / color / appearance. Thank you.

  Hi GANESHKUMARAPILLAI CHRYSTELLE,.

  Here is a link for color management workflows in Illustrator.

  It is best to place the image instead of paste into Illustrator. When you paste the images they are in RGB color format. Make sure your document is a RGB file

  Click on these links for more information.

  Understand the workflow of the CC of individual course Illustrator color management: Advanced

  Creative Suite * keeping colors consistent

  Implement the print color management workflow. Illustrator, InDesign, Photoshop

  Concerning

  Scott

• I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste,

  Issue.

  I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste, but no result. The widget disappear into the legend of block. disappear. Do you have a solution?

  Thank you

  Loïc

  Accordion Panel tabs should, with click and open the container.

  Please provide the url of the site where it does not, also if you can provide an example where we can see the exact action, then it would help us.

  Thank you

  Sanjit