Stabilization of the project with different video settings

Similar Questions

• I use IMOVIE. I had to project with mini videos. I can't burn a DVD. I have DVD creator, I can't find the project. How can I do?

  I use IMOVIE. I had to project with mini videos. I can't burn a DVD. I have DVD creator during its use, I can't find the project. How can I do? I made in IMOVIE I force see where and how I can save the project

  I have an IMAC

  Hey fradel,.

  Looks like you need to export your movie, so you can burn it to a DVD using the DVD Creator Application.  Back on how to do it.

  Now I'm not sure what version of iMovie you use, but take a look at the links below for the steps to export the videos to your computer. Then you should be able to see those newly created files on your DVD Creator application.

  This first link is for the latest version of iMovie and the following link is for the previous. If you have a different version of let me know.

  iMovie (2013): export a QuickTime file
  https://support.Apple.com/kb/PH14734

  iMovie 11: export your videos in a folder from the Finder
  https://support.Apple.com/kb/PH2285

  Take care

• Text prediction with different regional settings in Windows 7 - shows disabled in Korean

  prediction of title: original text with different regional settings in Windows 7

  Hello

  I have English as the main language and Korean as a language second.  Text prediction works very well with this configuration; However, if I change the regional settings (non-Unicode) in Korean, text prediction is disabled.

  There is no work around for this?

  Thank you.

  Michael

  Hello

  • Text prediction is only available in English, French, Italian, German and Spanish. To enable text prediction in a specific language, you must first install additional language files for that language. For more information, see install or change a display language.

  • Text prediction is not included in Windows 7 Home Basic Edition.

• Replace the charger in the project with sequence Panel

  Hello! I would like to ask a question on the simplification of workflow that is walk around in my mind for years:

  Is it possible to replace an element in the project with a sequence Panel?

  The reason why: I have a music-video with LOTS of cuts between relatively little overall clips. For the adjustment of the colors in the first (or otherwise), I like to keep as much space for easy modifications as possible until rendering and so create a sequence for each clip where I apply these effects at once. In this way, I don't have to go through each occurrence of the sequence in my calendar to change the rating. While this works well if you have done the part of each movie clip before the cut, I have no idea how to achieve this easily once you already have your project cut with clips instead of clip-sequences.

  Is there another way for the effects "on the scale of the clip" that I'm missing? Thanks in advance for the advice and help.
  Best regards!

  If I understand your workflow?

  Can have a look at the ranking of the main element.

  Apply effects Master Clip in Premiere Pro

  For it is possible to replace an element in the project with a sequence Panel? NO.

• 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

  Hello

  I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

  Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

  My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

  Thank you very much.

  My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.

• How to read the data with different XML schemas within the unique connection?

  • I have Oracle database 11g
  • I access it via JDBC: Slim, version 11.2.0.3, same as xdb.
  • I have several tables, each has an XMLType column, all based on patterns.
  • There are three XML schemas different registered in the DB
  • Maybe I need to read the XML data in multiple tables.
  • If all the XMLTypes have the same XML schema, there is no problem,
  • If patterns are different, the second reading will throw BindXMLException.
  • If I reset the connection between the readings of the XMLType column with different schemas, it works.

  The question is: How can I configure the driver, or the connection to be able to read the data with different XML schemas without resetting the connection (which is expensive).

  Code to get data from XMLType is the implementation of case study:

   1   ResultSet resultSet = statement.executeQuery( sql ) ; 
   2   String result = null ; 
   3    while(resultSet.next()) { 
   4   SQLXML sqlxml = resultSet.getSQLXML(1) ; 
   5   result = sqlxml.getString() ; 
   6   sqlxml.free(); 
   7   } 
   8   resultSet.close(); 
   9    return result ; 
  

  It turns out, that I needed to serialize the XML on the server and read it as BLOB. Like this:

   1    final Statement statement = connection.createStatement() ;  2    final String sql = String.format("select xmlserialize(content xml_content_column as blob encoding 'UTF-8') from %s where key='%s'", table, key ) ;  3   ResultSet resultSet = statement.executeQuery( sql ) ;  4   String result = null ;  5    while(resultSet.next()) {  6   Blob blob = resultSet.getBlob( 1 );  7   InputStream inputStream = blob.getBinaryStream();  8   result = new Scanner( inputStream ).useDelimiter( "\\A" ).next();  9   inputStream.close(); 10   blob.free(); 11   } 12   resultSet.close(); 13   statement.close(); 14  15   System.out.println( result ); 16    return result ; 17
  

  Then it works. Still, can't get it work with XMLType in resultset. On the customer XML unwrapping explodes trying to pass to another XML schema. JDBC/XDB problem?

• How to build the project with library error in adf adf

  Hello

  IM using jdev 11.1.2.3

  in my project I module 2 so we need to build the project with adf dependency libraries...

  Two copies of the way to build the project with trial and error in adf adf

  Timo

• transfer netlist to the project with 2 models

  I have a project ultiboard with two drawings of Board residing in it. I transferred a Multisim schematic/netlist to the first of the designs successfully, but when I tried to transfer a different/netlist diagram to the 2nd design in the project, he wants to throw the netlist 2nd in the first design exclusively. I tried several times without success.

  I'm trying to do something against the rules here, or should it be transfer to the 2nd design?  Thank you.

  Thank you to attach files. Helped me to understand what is happening. Files in Multisim and Ultiboard design have an identifier that must be unique, and annotation uses this identifier to know which file to annotate to. The problem is that the two files Multisim created from the same original file, then the identifier is the same. However, in Ultiboard only the first design has the identifier, so annotation always selects the first drawing.

  There are several ways you can work around this problem, but the following will work best:

  1. In Multisim, create a new file.
  2. Copy the contents of 2210_Gb to the new file.
  3. In the new file, click on transfer > Export access to card. Save the annotation file.
  4. Ultiboard, ensure that the 2210_Gb design is selected.
  5. Click on file > import > Netlist UB. Select the annotation file, then complete the import.

  Both designs must now have different identifiers, and everything should work as expected.

  In this case, the version 11.0 works in the same way, but annotation has been completely rewritten to 11.0, so, in general, the version is important when talking about problems of annotation. Version 11.0 also handles the case where the identifier is duplicated better, but in this particular case, it would have been unable to make a difference.

  In a concern for the interest, I have the figure of Saint happening by watching the exported files (ewnet) annotation of Multisim. The important line that showed what was happening was (crossprobe {1A3B1023-68AC-4093-8329-885357CD0F2F}, which is the identifier and is the same for the two files of Multisim.

• Message when the project with external link display

  Dear Sir.
  
  I am very fimiliar with Robohelp 6 options. As I've updated from version 6 or 7, things were different. I have a huge project webhelp which consists of many subprojects, in most of them, there are hyperlinks to each other.
  the problem is that whenever I open a project that references an external subject, a message appears saying: (the hyperlink... used in... is outside the flow of the project and do not appear in the project manager)

  This is a standard message and if you like the links are good, there is an option to disable the warning.

  I suspect that you turned off in RH6 and installation for RH7 just brought.

• Can not play any YouTube video or even get YouTube to the charge with any video

  If I try to load videos hosted on YouTube, they won't charge, they will not show even a placeholder to show that something should be there. If I go on YouTube, the site does not load with any video. All I get is a list of links to subscribed channels and my account and all these nonsense, nothing that looks even remotely like a video. This occurred only since 28 beta 2 has been installed.

  If you use extensions (Firefox/tools > Modules > Extensions) which can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that these extensions are not blocking content.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• SHOCK: X 200 noise (no fan) with different power settings

  Machine very quiet in general. But finding a question important 30 min after my hands on it:

  When I switch the power Off timers for setting, I heard very loud noise of current electric, close to the battery (upper part of the keyboard). I thought it was something unique to 'Timers Off', but towers was not released. I saw occasional same question with "Max Performance" / / "Energy Saver" etc.

  It is NOT the power adapter. He SPRING of the machine itself. Is not related to what you use the speaker or headphones. No partner that you were using the adapter right battery or sector.

  BTW, I just opened the box and did the Windows updates. No related software. No matter which firmware questions here?

  Any comments?

  Thank you!

  With the help of Mark, Lenovo responded effectively to try to resolve the problem. The technician and I think it is the LCD inverter noise. However, at least the special inverter we replaced the former with does not seem to solve the problem of my day 2 experience after replacing...

  The machine works fine except for this standby failure noises, Hibernate slow Vista Vista and sometimes.

  The noise recorded using the built-in microphone is like that. It does not systematically refer to the a/c adapter / battery use. Regardless of the CPU, video, ram, HD use.
  https://netfiles.uiuc.edu/xzhuang2/shared/noiseafter_inverter_replacement.WMA

  UPDATE: with the help of Mark, Lenovo finally sent in a replacement machine. The new machine seems to be free of the noise of the ups, at least for now. I hope that it was only an isolated case. Thank you, Mark!

• deploy the project with Ethercat

  Hi all!

  I need help. I created a project that consists of two parts. The host to run on a Standard PC (HMI display...), that the second part is working on a controller PXI (RT) linked to an Ethercat 9144. I have my project debugging and everything works perfectly, I am able to read variable Ethercat of host, send data to the RT using shared variables...

  To complete my project, I wanted to create an exe for the RT. This is the beginning of my problems. I built the executable, set it as start and deploy the exe to the target. After rebotting target, I started the application on the host... Now, it is impossible to read Ethercat variables and variable shared. If I try to set up the shared variable or the Ethercat for the project, it stops the executable that runs on the target...

  I have not found any documents that describe how to deploy variable Ethercat in an executable... Does anyone have an idea about this problem? any suggestion is welcome...

  When running a windows project, libraries RT SV are usually defined to deploy automatically when the application of the RT is deployed.  Also you can manually deploy libraries SV yourself project.

  Once a SV belonging is deployed on an RT target that it will stay there until eliminated.  You can verify your deployment with Distributed System Manager (DSM) If you see it then you're good.

  Your RT exe cannot deploy its own libraries, they should be deployed in advance.  In addition, you should be able to use the DSM to see the IOV engine on the 9144 chassis analysis even if your RT application is not running.  Check this first.  Also check the on your target RT .alias file to make sure it has the appropriate IP addresses to resolve any URL NSV.

• Cannot save the project with film about WMM 2.6

  Hi im trying to save my movie in Windows Movie Maker 2.6, but it does not let me save all I need a way to record as soon as possible...

  Please give me answers that will help me as soon as possible!

  How many photos? If it's a big project with many effects and
  transitions, it may be too complex for your system resources.

  Are the photos all JPEG (.jpg)?

  Convert pictures in Windows Bitmap (.bmp) image may be worth a try.

  And... before trying to save... it may be worth trying to go to...
  Tools / Options / compatibility... tab and uncheck the box 'all' filters / OK.

• Texturing the model of the project with the high texture layer of the page crashes the rendering queue

  Hello. I am trying to add an overall texture to the model of the whole project by adding a jpg with texture to the top of my diapers and affecting the overlay mode. However, when I try to exit out of the queue to render in format .mov, it hangs and will not be rendered. I use CS6 AE. 64 GB of RAM. Any help would be appreciated on how best to add an overall texture, if this isn't going to work. Thank you!

  

  I'm not really sure what version of AE, you're running; I'll guess CS6.  It is up-to-date, as in version 11.0.4?

  I see that you do NOT multiprocessing, which is good.

  And just as a workaround - just to get the project to the door - you could always rendering on the comp in a lossless codec, then just put the overlay on the imported file, recently visited a new comp.

• Find the space between the word with different endings and figures

  Hello

  I am trying to find a way to find spaces between the words and numbers.

  

  I'm limited to only use the word "WORD" (capital or small capitals) with different endings like - ing s y and more (using \S+).

  I wrote something like (? i) (? < = WORD\S +) \s(?=\d+) but this does not work due to some limitations of advanced search, I think?

  Any suggestions?

  Peter

  On the other hand, I think that.