"Specific vulnerability"error codes. " ___

Similar Questions

• Window 7 unsuccessful backup, error message "the system cannot find the specific file" error code: 0 x 80070002.

  I tried to back up my desktop using Windows 7 upwards, but he is not successful, he stopped, message error "the system cannot find the specific file" error code: 0 x 80070002.  He said no specific file that causes the problem.

  Also, my Seagate FreeAgent, I back upwards of C: from my old PC that runs under Windows XP, which causes conflicts of the OS?  Enjoy diagnose and advise!

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you follow the steps in the link below and check off the question:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7:

  http://support.Microsoft.com/kb/979281

  I hope that the information above helps you.

• Names of specific driver for the blue screen error Codes

  Hi all! Need your help please! Like so many others, I received Error Codes blue screen, that crash my system. I need to know the names of the specific drivers associated with these codes so that I can disable them (in accordance with the instructions of Windows), internet research has not helped. If anyone knows what are the names of the associated drivers or how to determine them it would be greatly appreciated! The error codes are:

  0x0000007E; 0XC0000005; 0X82D1F1C4; 0XF89EFB04; 0XF89EF800

  Thank you!

  Hi Anna K.

  When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.

  For more information on the reading of the memory dump files, see the following article:

  How read partial memory dump files that Windows creates for debugging

  See also:

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  Note The article above applies to Windows XP. However, you can follow the steps to solve the problem.

  If you don't have any service pack (SP) installed, please consult you may receive an error message "Stop 0x0000007E" after you enable the BitLocker Drive Encryption feature in Windows Vista

  In addition, you can also download the minidump files so here experts can analyze the cause of the error on a blue screen.

  See use SkyDrive download collected files and post screen shot/image

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

  The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
  -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
  Event name: BlueScreen
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\Mini013110-01.dmp
  C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
  C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
  Online from the best part of twenty minutes before it occurred. The two users of the
  program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• MSE answers specific to the error codes.

  I think it would be useful to be able to insert a screenshot of paint in the other details for MSE error codes. Plans to use in the future, or have I missed something?

  Thank you.

  It is possible to post screenshots, but not, as you have observed, through the buffer of the dough of a general application.  The general approach is to store a real screen shot on some website storing the image, and then put a link here.  Do it right and you will see the actual picture.  Here is a description using SkyDrive: http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65

• whenever I try to get the security of microsoft essintials I get the same error code 0 x 80070643 what do I do now? ___

  After several attempts to download microsoft security essentials, I get the same error code 0 x 80070643 what should I do now?

  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/908fad3e-F9FC-4d8a-BE83-ae7d3bc48db5 If this post answers your question, click mark as answer .

• Vista - Error Code: 800F0816 (could not install KB2296011) Hung to configuring updates 3/3

  Laptop from my dad recently started showing "configuration updates 3/3" followed back changes not configured message. It is on a continuous while loop that will sometimes allow windows Vista Home Premium to start. I checked the history of update and the first failure is KB2296011 which shows the error code 800F0816.  Currently, I have his laptop but cannot access the internet because it does not connect to the internet via my network (do not have the knowledge necessary for to be difficulty)

  Can someone help me solve this recurring problem. If necessary I will be able to access the internet on the laptop question but would like to know a solution offline if possibel. I don't want to pay Microsoft Help for the answer. I'm not very literate pc so a simple solution would be better.

  You don't have to pay "Microsoft Help" for a response from the update that you have posted, KB2296011, is a Security update.
  Of MS10-081: vulnerability in the Windows common controls library could allow remote code execution (KB2296011)

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  800F0816 - express package has not been completely downloaded. The status of the operation was recorded while the package is downloaded. An express package is a package that you are installing by using Windows Update. With these packages, only the files needed for that specific computer are downloaded and installed (unlike when all is downloaded to a computer).

  For a 'solution offline' you can try to manually download each update to the computer you are currently using and then transfer to the portable touched with a USB key.
  Then see if they install correctly. Given that we do not know all the edits concerned... open Windows Update in Control Panel, and then click View update history link to see updates try to install.
  Note that the KB numbers are updated and post them in this thread or,
  go to the Microsoft Download Center, enter the KB numbers in the field to Search all Download Center , click the magnifying glass to search and download for Vista updates that correspond to the architecture of the system. (The architecture of the system is displayed when you open System in Control Panel and look at the side of System: type.)

  Save updates. When the downloads have finished, close the browser and all other open programs and install them one at a time. Suggest that each time you are prompted to restart.

  You can configure the phone assigned to the clean boot. Then see if the connection is restored, the updates can be downloaded and installed-
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  Expert MowGreen Windows IT Pro - consumer safety

• Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied.

  Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?

  Hello

  You are unable to download the updates?

  Try the following steps to resolve the problem:

  Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.

  Check out these links:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
  your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
  connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't download SP2 and I get error code 800F0900. I have tried everything I can but still no joy

  Cannot download SP2.  I have sp1

  The 0x800f0900 error code represents an error of parser internal XML (CBS_E_XML_PARSER_FAILURE).

  Method 1: Run (Checksur.exe) system update readiness tool

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  Method 2: Close or disable any applications that may be running, restart the computer

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system.

  During installation, one of the most frequent causes of failure occurs when a third-party application holds open a file or locks a file that the service pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. To minimize this risk, follow these steps:

  1.	Close all applications and restart your computer.
  2.	Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps: one. Right-click the icon of the third-party program. b. Click Close, disable, output or an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
  3.	As soon as you close the antivirus or the antispyware software, try restarting the computer.
  4.	After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  1. close all applications and restart your computer.
   
  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
  a. right-click on the icon of the third-party program.
   
  b. click Close, Disable, output or an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
   
   
  3. as soon as you close the antivirus or the antispyware software, try restarting the computer.
   
  4. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  Method 3: Install the stand-alone package for the service pack for Vista

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx (includes a link to download the SP2)

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  1.	Close all applications and restart your computer.
  2.

  Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:

  one.	Right-click the icon of the third-party program.
  b.	Click Close, disable, output or an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.

  3.

  As soon as you close the antivirus or the antispyware software, try restarting the computer.

  4.

  After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  1.	Close all applications and restart your computer.
  2.	Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps: one. Right-click the icon of the third-party program. b. Click Close, disable, output or an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
  3.	As soon as you close the antivirus or the antispyware software, try restarting the computer.
  4.	After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  TaurArian [MVP] 2005-2010 - Update Services

• 0x8024400a error code appears, and when I try to download service pack 3, it won't let me.

  0x8024400a error code appears when I try to download updates and says I need service pack 3, and I can't download anyone. So, how = I download?

  Hello

  1. How are you trying to download? You use Windows update, or download the standalone pack?
  2. What is the full error message?
  Method 1:
  Check out the link and follow the steps.
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941
  Important This article contains information that shows you how to help lower security settings or how to turn off the security features on a computer. You can make these changes to work around a specific problem. Before you make these changes, we recommend that you evaluate the risks that are associated with the implementation of this workaround in your particular environment. If you implement this work around, take additional measures to protect the computer.
  Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this solution to workaround but are providing this information so that you can implement this workaround at your own discretion solution. Use this workaround at your own risk.
  Method 2:
  Check out the link and follow the steps.
   
  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  OP can refer to the "Troubleshooting Windows XP SP3 installation" section in the article mentioned above for troubleshooting the installation of SP3 issues.

  How to get Windows XP Service Pack 3 (SP3)

  http://support.Microsoft.com/kb/322389

• Cannot install error code is Ko 2596666 80070652.

  Original title: error code 80070652 despite repeated installation attempts and many fixes auto, the problem persists

  Widows Vista Home premium. KB2596666 security update does not load. It generates the error code 80070652 constantly and despite many automatic corrections of microsoft that the problem persists by train.

  Please advise a fix or how to get rid of the update.

  Hello

  1 did you change on your computer before this problem?

  2. is there a specific problem with the installation of this particular update?

  3 are. what patches you referring?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2

  You can follow the procedure in the article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

   

  Step 2:

  Download and install the update from the link.

  Update of security suites for Microsoft Office 2007 (KB2596666)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30285

  Method 4

  You can disable temporary security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

  I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

  What are error codes: 800F081F & dt000

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this update?

  3. are you able to install other updates successfully?

  4. What is the brand and model of the computer?

  5 all the troubleshooting steps you have done?

  Try these steps and let me know the status.

  Method 1.

  I suggest you follow the steps in this article.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Method 2.

  Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3.

  Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

  Method 4.

  The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

  The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

  For reference:

  Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

  I hope this helps.

• my windows vista will not update or accept any download error code 800700cb

  my windows vista does not accept updates or tried any download error code 800700CB can someone help pls?

  Hello

  (1) what is the exact full error message?

  (2) is the specific question of an update?

  (3) remember you to make changes to the computer before the show?

  You can try the following methods and check the status of the issue.

  Method 1:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Disable your security software installed on the computer and try to install the updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• External backup error code 0x80070005

  I get a error code 0x80070005 when I try to do a full back up to my external hard drive.  He says "access denied" but I am the administrator. This problem just started.  I disconnected and reconnected the external drive and my computer recognizes that there is no problem.

  Hello

  1. don't he stops at any specific file?

  2. do you have permissions to the entire file for the files that you are backing up and to the destination you save back to the top?

  3. don't you make changes to the computer until the problem occurred?

  To work around the problem, you will need to follow the steps below.

  Step 1: I suggest to try to create a backup in the clean boot state and make sure that the antivirus software is disabled temporarily and check if that helps.

  Follow the instructions in step 1 in the following article. Run the backup and check if that helps.

  http://support.Microsoft.com/kb/929135

  Note: make sure you put the computer to a Normal startup, once the troubleshooting completed.

  Disable the anti-virus software

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• Cannot view or change the settings of backup - error Code 0 x 80070422

  I am able to run a backup using the existing settings/settings I put when my system was new two years ago.  I just ran a backup and finished without any problems.  But when I click on "Change settings" to view the settings, I get the error code 0 x 80070422.  Error message States "the backup application could not start due to an internal error" followed by "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  I already read many posts on this site about this error and how to correct.  I followed the suggested steps to fix the problem, but the error persists. =(

  Specifically, I checked that the following Services are enabled.

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(EventSystem) must be active, Manual.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must be active, Manual.

  'Microsoft Software Shadow Copy provider' (SWPRV) must be active, Manual.

  I also ran an SFC scan and received the following confirmation at the end-

  "Windows resource protection has not found any breach of integrity."

  Any suggestions on the next steps, I could try to fix this? 

  Thank you!

  Hello

  Please provide detailed information on this issue and I appreciate your valuable troubleshooting efforts toward the resolution of the problem.

  However, we are still missing about two or three services so that this error happens when the necessary services are disabled.

  Method 1: Please check these services.

  • Block level backup engine - active - repair manuals
  • -Active - backup manual Windows

  If the settings above does not work, you can try to adjust Volume Shadow Copy (VSS) on Automatic and check if that helps. Then change it back to Manual after verification.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  If the problem persists, follow the next method.

  Method 2: Disable the antivirus.

  You can also try to temporarily disable the security software of the computer and try to create a backup and check if it works. If you are able to create a backup, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Set up or change automatic backup settings

  Back up your programs, files and system settings

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni