Names of specific driver for the blue screen error Codes

Similar Questions

• System unexpectedly stop restart and go to the blue screen "error code 0141.

  Original title: error code

  my lap top is suddenly happened to bluescreen, shut down and then after reboot, one, (error code 0141), appears. can you please tell me how to fix this?

  Hello

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks like you have a problem with Windows Vista, getting automatically restart with a blue screen.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?
  2 what happens while accessing any special request or programs?

  I suggest you to check the information contained in the event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Perform a clean startup will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows vista: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly: http://support.microsoft.com/kb/958233

  Resolve stop (blue screen) errors in Windows 7 (similar to a few steps of the mentioned below, the section applies to windows vista): http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Notes:

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade installation, I recommend you back up your files using windows backup.

  We would be more than happy to help you if the steps above did not solve the problem.

• Blue Screen: Error Code C0000218(Registry File Failure) I have NO recovery disk, boot disk, etc. What can I do?

  I have a desktop HP that I installed a new hard drive on Windows XP Home Edition Service Pack 3. He has been working very well. But, the other day, I took out my DVD ROM and try it switched with different DVD - ROM, and when I restarted my computer, I got the "blue screen error Code: C0000218 (registry file failure)." The registry cannot load the HIVE (file). \System ROOT-SYSTEM 32-CONFIG-SOFTWARE or its log or alternate. It is damaged, missing, or not accessible in writing. "So, back to my main issue, I guess. How can I fiw it without any sort of disk recovery or boot disk etc... I know I could probably go buy some sort of recovery software, but can't afford it right now. Can someone help me, please?

  You have all the Norton/Symantec products installed and if so, do you know which ones and versions?

  You start with a chkdsk/r from the XP Recovery Console.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Help to fix the blue screen error: STOP: 0x0000007A

  Original title: I get the BSOD on my Dell Inspiron 14 stop information is at the bottom.  What means this dose-specific code and how can I solve this problem?

  STOP: 0x0000007A (0xFFFFFFFFC0000056, 0x0000000058DB3860, 0xFFFFF8A000E42A48, 0xFFFFF960001E082C) he begins again each time after it happens like nothing ever happened, but I don't want my computer any crash if there is an easy way to understand what it means and set it would be nice.

  Hello

  Here are some of the more general methods that could help solve the problems of use as
  necessary (same as in the link below).

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• I get the blue screen error that says CONFIG_LIST_ failed

  I get the blue screen error that says CONFIG_LIST_ failed with the error stop

  0 x 00000073 (0xc000017D, 0 x 0, 00000001 00000001, 0xF90EEBB8)

  and no FAILURE, but also last Config mode. are not able to enter either. PS my CD rom drive has been inoperative for a long time so can't use reinstall disk

  and available good PC has no floppy. Can I use a flash drive to copy all the files needed XP recommended installation. disc?

  Hi philadel37,

  Unfortunately, you can not use the flash drive to restore system files or to solve this problem.

  You will need to use the Windows XP installation disk to perform a repair of Windows XP installation.

  See the article for more information about the Windows XP repair installation.

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• How can I stop the blue screen error caused by sffp_sd.sys

  Since the middle of the latest version of windows aprils has updated that I regularly get the blue screen... The last was 26/05/12 16:30...

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  STOP: 0X000000D1 (0X00000002, 0X00000000, 0X00000008, 0X914E8774)

  BTHUSB Device bthport.sys - 914E8774 address, base at 914E5000, Datestamp 4db03738

  Hello

  BTHUSB Device bthport.sys and sffp_sd.sys are the two components of Windows that means something else led him into
  Fault. First thing I would do is update the BlueTooth drivers. Check with the system manufacturer (mother's support-
  the Board Maker for systems (custom), their documentation online and drivers and ask in their forums (if any)
  known issues and/or / the real peripheral manufacturer support site. (See driver update methods in the next
  message.)

  ===============================================================================

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ==================================================================

  BCCode: D1 0x000000D1

  Think video drivers especially if it may be others. Refer to the section of driver in my credits
  methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
  antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
  When you arrive at the driver and tests of memory sections do reference to generic methods in following
  message and then back to the if necessary troubleshooting tool.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  
  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I get rid of the blue screen error?

  Original title: Windows Vista Start does not

  Hello
  I have Windows Vista Home Premium, and I've had it for 5 years now (2006-) the problem is that I don't know what happened, but when it restarts, I have two options;

  Startup Startup Repair (recommended)
  Start Windows normally

  When I choose "Start Windows normally", a blue screen appears with an error message and disappears quickly, leading me to restart my Vista again. However, when I select Launch Startup Repair tool, it takes a while and after a bit, it ask if I want to send the error to microsoft (recommended) and I choose Yes, and it takes a little more time to look for a solution. Finally, a list of appropriate actions appear;

  Startup Repair; I tried this 8 times now, and he cannot find a solution, leading me to reboot once more.
  System restore; I tried ALL the dates of the restoration, and none of them worked. I got an error saying: it cannot restore.
  Restore the computer; 1. I don't have a backup drive (it's a shame, I know) and 2. I don't want back up and lose all my files.
  Windows Memory Diagnostic tools; I checked all hardware error, and none have been found.
  Command prompt; I don't know what to do with it.

  If someone can PLEASE help me, I would be VERY grateful. I have very old memories and photos on this computer and I don't want to lose these. I am begging for someone to help me, and my last priority would be to forget all these photos and files and move: (.) Oh and I tried running safe mode, by pressing F8 while the computer restarts and I've highlighted Mode safe mode with networking, but it gives a quick overview of a blue screen just and hangs on reboot. Please help me on the procedure to follow for the good of my IMPORTANT files and memories.

  Thank you, in advance.

  Hi AffanX,

  Method 1: Try to disable automatic reboot in the menu start-up advanced options, and then try to capture the blue screen error message, see the link below:

  Advanced-Startup-options-including-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode 

  Method 2: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  After disconnecting all external devices, run the Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  You can see the steps below for more information

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Article above applies to Windows Vista)

• Blue Screen error code RQL_Less_or_Equal stop: 0X0000000A, C0xE10039F0, 0x000000FF, 0x00000000, 0x8056CA2E

  I came to doday to find that a blue screen on my pc .This is the error number.

  Blue Screen error code RQL_Less_or_Equal stop: 0X0000000A, C0xE10039F0, 0x000000FF, 0x00000000, 0x8056CA2E

  Please provide additional information on your system:
  What is your system brand and model?
  What is your version of XP and Servie Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and everything seems
  be personal information for you, just delete pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all of your files to dump.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send information from 5 last memory dumps.
  While you wait for analysis, no matter what you use for protection against malware, please follow these steps:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Im trying to download the creative cloud on my Mac but its gives me the error "Installation on case-sensitive volumes is not supported. Please choose a different volume for the installation. (Error code: 22) "can you help me with this please?

  Im trying to download the creative cloud on my Mac but its gives me the error "Installation on case-sensitive volumes is not supported. Please choose a different volume for the installation. (Error code: 22) "can you help me with this please?

  Try error "Unsupported of disks case-sensitive" or similar install error | Mac OS

• CD/DVD drive, causing the Blue Screen of Death stop

  Software from CD/DVD in my Dimension E510 desktop seems to be the dreaded blue screen shut downs - usually as a CD is ejected. The web page error analysis Windows that appears after that restart indicates the problem is caused by a resulting driver. It's the Sonic Digital Media software provided on the system, but sometimes when I run the program I get a warning message saying that the software is not an approved final version? I would like to uninstall the Sonic CD/DVD software which seems to be the cause of the problem and replace it. This will probably solve the problem of the "blue screen", and which would be a recommended CD/DVD operating system that would be compatible with my system. Any suggestion would be appreciated.

  Name of the operating system Microsoft Windows XP Professional Version 5.1.2600 Service Pack 3 Build 2600

  System manufacturer Dell Inc.

  System model Dell DM051

  System Type X 86-based PC

  Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz

  Total physical memory 1 024,00 MB

  Available physical memory 479,88 MB

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Drive D:

  Description CD-ROM drive

  Name the HL-DT-ST DVD - ROM GDR8164B

  Manufacturer (Standard CD-ROM drives)

  IDE\CDROMHL-DT-ST_DVD-ROM_GDR8164B___0D08___\5&29A96F35&0&0.0.0 PNP device ID

  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  Drive E:

  Description CD-ROM drive

  _NEC DVD +-RW ND-3530 name has

  Manufacturer (Standard CD-ROM drives)

  IDE\CDROM_NEC_DVD+-RW_ND-3530A___103C___\5&29A96F35&0&0.1.0 PNP device ID

  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  
  

• Update iTunes reduced Windows 7 for THE BLUE SCREEN OF DEATH

  does anyone else have this problem?  After I got the BLUE SCREEN I reset Windows to an earlier date and tried to install the new version of iTunes again and it happens every time I install it.  I lost all my music in iTunes and apple all can say is "it's a problem of microsoft."  someone will save us please the tyranny of apple?

  You have a version of iTunes or Quick time software installed?

  If so, uninstall, and then download a new copy and try the installation again.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  iTunes for Windows: how to disable Compatibility Mode
  http://support.Apple.com/kb/TS1489

  iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32."
  http://support.Apple.com/kb/TS1406

• My computer crashes from time to time, and sometimes I have the blue screen errors.

  I am running Win 7 on a 2 years old HP Pavilion. I started having occasional blue screen errors, and some applications are a little weird. I haven't added anything recently except the recommended Windows updates. Now when I try to stop, it just display the closing, and I pressed the power switch. I tried to restore to an earlier time a few times in the last 90 days. Suggestions, or I need to reload Windows? If a reload is correct, can I charge for the recovery through my recovery cd partition?  My processor is an AMD Phenom 2.90 GB with 4 GB of ram, Win Home Premium software. Thank you... Joe

  I think that your problem is related to your wireless network connection.

  Send a copy of your dumpfile as a shared folder on your drive of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To get tips on how to configure your system to create dump files please read:
   http://support.Microsoft.com/kb/254649

  The dumpfile will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  Please download and run the display driver and download a copy of the report he produced on your sky player
  http://www.NirSoft.NET/utils/DriverView.html

  Please download copies of your system logs and Application of your event viewer on your sky drive and post a link here.

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events as and give the file a name. Do the same for the application log.

• Helps to solve the blue screen error 0 x 24

  Original title: the blue screen of death

  My widows Xp got the blue screen of death, ofthe ERROR (0 x 00000024) he tells me that I need to run CHKDSK. I don't know how to make it work and I can not start safe mode because it brings back me to the blue screen.

  I don't have the disk, but I have a Cd to burn files on.
  PS. You can go into details as I am new on this computer setting
  Thanks Chris O Rourke

  Because a lot of people doesn't seem to have an XP Installation CD, I have these instructions on how to create a CD of bootable XP Recovery Console and run chkdsk (no XP media required) program.

  If the forums MS Answers would invite for a little information system, when a new question is asked, you would be probably done now...  I take for granted that you have an internal or external CD/DVD drive that is functional.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Get the blue screen Error Message: 0x116_TdrBCR:2_Tdr:2_IMAGE_nvlddmkm.sys and Vista crashes

  Original title: crashing in Vista, something with the drivers I think

  At startup, I see a message that says: Media test failure.  I can sometimes to vista in normal mode, but then it's a matter of time (not too long usually) before the screen flickers and goes black.  I then turn off the power and restart.  Once it says graphics driver NVIDIA has stopped working properly, I've updated my driver and now it says it's working properly, but I still have the same problem.  My bucket of blue screen error is: 0x116_TdrBCR:2_Tdr:2_IMAGE_nvlddmkm.sys any help will be greatly appreciated

  Hi zambetti,.

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This error indicates that an attempt to reset display driver and recover a timeout failed.

  Check out the link:

  http://msdn.Microsoft.com/en-us/library/ff557263%28VS.85%29.aspx

  Since you've already tried to update the Nvidia drivers, you can try to uninstall and reinstall the same check.

  You can try to uninstall and reinstall all the programs and features Nvidia drivers and Device Manager.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all driver packages, Nvidia, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall.

  After you remove the drivers of these two places, you can try to remove the NVIDIA folder and restart to see if that solves the problem after I installed the generic drivers.

  Step 3:

  To delete the folder:

  one. Click on start and Type C:\windows\system32\drivers folder in start search

  b. click on drivers and select nvlddmkm.sys

  c. right click and rename nvlddmkm.sys in nvlddmkm.sys.old. or delete.

  d. restart the computer and check.

  You can also check the manufacturer's website and download the latest drivers from Nvidia:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.