Specifications for U160

Similar Questions

• I bought an iPad mini4 specifically for use with a pro Phanton3 drone. It will NOT connect the remote control with the drone. They say it's a problem of software iPad mini 4 9.3.3. How can I remove and reload it.

  How can I uninstall 9.3.3 an mini iPad iOS 4 and reinstall? I bought it specifically for a ghost Pro 3 drone, and it does not work with the drone. Someone had luck with uninstalling/reinstalling. At this point, I lost a LOT of money.

  Apple frowns on a decline in the ratings.

  While Apple allows, try downgrading to 9.3.2.

  For a limited time Apple will return you to the previous version.  Do not hurry.  This period takes up to a week.

  See brownox second post here:
  https://discussions.Apple.com/thread/6545455
  and
  http://www.GottaBeMobile.com/2014/09/17/downgrade-iOS-8-to-iOS-7/

  see which versions are allowed:
  http://API.ineal.me/TSS/status

  --------------------------------------------------------------

  See the arizonacat post and others on this topic.

  https://discussions.Apple.com/thread/5337442?TSTART=0

  arizonacat notes these sites:

  • Allows easy access to the files in the Apple firmware.
    http://www.ipswdownloader.com/
  • How to install the ios software.  The installation will erase your outgoing data. Back up your existing data.
    http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/

  --------------------------------------------------------------

  See the second procedure in reloading the software from scratch.

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

• What are the specifications for an avatar?

  Does anyone know the global specifications for an avatar?

  I collected some of the avatar next to various images and found that they were all 68 x 68, so my first attempt was a png 68 x 68. But that seems smaller than the other. So I tried 256 x 256, and coming out of the same size as the others. But what we should use? Page load gives only the size max 2 MB. My 256 image is only 13.8 KB, so should I go for the max which is part of 2 MB? This seems unnecessary, since it will never be seen with this resolution. It would be useful if the loading page gave a size recommended, rather than simply 'go there '.

  Thanks for your suggestions.

  SQUARE & larger than the target of 68 x 68. He'll go through the process of harvesting the SiteWare anyway - and downsampling will whatever happens

• Set up a user profile specifically for the game

  Hi all

  I installed Windows 7 (64-bit) and use it mainly for work (Excel, SPSS, Word). I also have many programs start automatically with Windows and run as background processes. What I want to do is create a profile user who loads only minimum programs and services required to play video games. Currently I have to manually complete the applications and services, which is a pain in the thigh. How can I configure a user profile specifically for games?

  TYIA,

  Mark

  Hi Mark,

  You can create a new user profile, but you will need to put your computer in a clean boot for the new user account only State to play games and to disable applications/services that are not used frequently.

  New user account will inherit all startup applications and services of the administrator account.

  To create a user account , follow the steps in the link
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  To put your computer in a clean boot State, follow the steps in the article.
  http://support.Microsoft.com/kb/929135

  Aziz Nadeem - Microsoft Support

• Where can I find specifications for Acer laptops to upgrade? I have an Acer Aspire one

  Hello

  Where can I find specifications for Acer laptops to upgrade? I have an Acer Aspire One, which is still under Windows XP.

  I looked on the website and check the manual with no techinical inside info.   I'm not find respect for this netbook.

  Can someone identify the info.

  Thank you

  T

  Hello Tom,

  You can watch this video. The AOD250 have the same specifications as (same motherboard with Intel Atom N270 processor).

  I suggest you to upgrade the memory to 2 GB:

  KN.2GB09.003	SODIMM.2GB.DDR2 - 667.LF (ELIPIDA)
  KN.2GB0B.011	SODIMM.2GB.DDR2 - 667.SAM (SAMSUNG)

• The charges or specifications for a laptop HP G6000 notebook?

  Someone at - it have or know where I could find the specification of the charges or specifications for a laptop HP G6000? I am particularly interested in the installed hard drive. My computer laptop HD girls broke down so I can't even start it until you find the HD spec, and although I have it removed, I think it's a Toshiba HDD2D62 120 GB Sata 2.5 ". I can't find a similar one anywhere or a Web site that provides an appropriate compatible HD. Suggestions anyone?

  Hello

  The laptop is probably a SATA I sort of SATA drives (not SATA II) should work on the laptop. I think that any SATA 160 GB hard drive should work.

• BlackBerry Smartphones designed specifically for BB 8310 SDHC Kingston

  I see on Amazon's site, they have the Kingston 8 GB SDHC specifically for the BB Curve 8310 and I wonder - is it really necessary to have a design for the 8310.

  Hi and welcome to the forums!

  He just passed on the Amazon website that your post that made me curious.

  It looks like a marketing "scheme." The actual card makes no claim that it is for the 8310.

  The Amazon site it lists because of the verbiage attached, allowing you to 'Start', a list or a guide

  for the card as a 8310.

  I have always used Sandisk (cheaper) and that you have not had a problem.

  Thank you

  Bifocals

  Lists and Guides tagged "sd micro sdhc 8 GB kingston 8310.

• What are the specifications for an inspiron 3000 11 touchscreen?

  Myself and others have on a mission to find a stylus that works with this 2 in 1 and so far not had much luck.  The squishy tip pen that I got for my phone does not work.  One of these somewhat new metal stylus with the small round disc on the end works fine on my phone, but not on the inspiron with or without a screen protector.  I had an active stylus for motorola with a battery that someone suggested, it does what intermiittingly but I guess the fact that it works at all should give me some hope.  What are the specifications for the touchscreen on the 3135?  I read that a thick cover as glass can affect if the pen works or not as well as screen protection.  I found a couple of stylus that claim to have the adjustable power so they should work with coatings of glass and screen protection.  Pen digital universal Adrien, adjustable overdrive and navitech are all meant to be active stylus which have two power settings.  I asked in the faq, but nobody can say if it works on the inspiron and the manufacturer says they have not tested either.  While I hate to spend 30 dollars on something like that without knowing that it will work 100%, I ordered one of the navitech off amazon because I can go back if I want to.  I poured everything I can find on this machine, but nowhere does anyone give any details about the touch screen.  I know that this is not intended to be a stamp artist drawing or anything other than the simple ability to interact with small buttons on the screen or the digital signature casual or simple drawing hand is the main reasons I want a small pen tip.  Don't get me wrong, I really enjoy this machine, but I don't understand why material for touch screen specifications seem to be such a mystery tech dark and deep.  This is perhaps because Dell has more than one supplier... I guess it could be both one reason than others.  Even if we can talk only about basic general information is probably more than I've found so far.

  Your S3 screen with a digitizer.  Your laptop screen does not work.

  Essentially, a laptop a scanning screen is also called "tablet" and - for systems or more 12 "inch screen size, will sell for a minimum of about $800-900.  About lowest price will be a simple touchscreen - not a digitizer.

• ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  I cloned database of MRC. (test for role transitions) and set up DR.

  I tried to set up with no default port.

  When I'm bouncing of the db, (stop and start), cannot connect to the db.

  SQL > startup nomount;

  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00132: error syntax or network name not resolved "LISTENER_STBYCRMS."

  > > tnsnames.ora

  LISTENER_STBYCRMS

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT= 1898))

  STBY_CRMSDB =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1898))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = stbycrms)

  (UR = A)

  )

  )

  LISTENER_CRMS =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1698))

  CRMSDB =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1698))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = GCD)

  (UR = A)

  )

  )

  ~

  > > listener.ora

  LISTENER11G =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1898))

  )

  SID_LIST_LISTENER11G =

  (SID_LIST =

  (SID_DESC =

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = stbycrms)

  )

  )

  ADR_BASE_LISTENER11G = / u01/app/oracle

  * I have an entry to the file for local_listener pfile.

  * .db_name = "CRM".

  db_unique_name = stbycrms

  LOCAL_LISTENER = "LISTENER_STBYCRMS."

  Thank you

  Hello

  LISTENER_STBYCRMS (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT= 1898))

  Is the above entry is correct according to the syntax?

  where give you "="?

  LISTENER_STBYCRMS = (Description = (Address = (Protocol = TCP (port = 1898))(Host=Neptune)))

  or

  LISTENER_STBYCRMS =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXx)(PORT = 1898))

  )

  )

  -Pavan Kumar N

• Specifications for the use of Adobe Creative Cloud

  I have to buy a laptop for the school which can run Adobe Creative Cloud.

  I saw a laptop on sale, but I'm not that it meets the requirements to run without problem.

  HP 15-AY058NB laptop

  Intel Dual Core N3060

  Intel 400 graphics card

  4 GB OF RAM

  1 TB memory

  Windows 10

  Can someone tell me if this is enough run CC?

  Thank you

  Hi Kristofj35201071,

  Please see the technical specifications for creative cloud:

  System requirements | Adobe Creative Cloud

  You can also get in contact with Adobe support:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Specifications for the T500 2055 (NK145UK) or 2055 (NK13AUK)

  Hello

  Very impressed with the battery wire. I hope that my question is not too specific.

  I'm looking for the official specification for these models T500. It seems that they are not the latest model (part number starts "NK" instead of "NJ"), or more recent specifications, but I thought I could upgrade the memory and the hard drive later.

  Is that what I should watch?

  • T500 2055 (NK145UK) - T9400 (2.53 GHz) - 2 GB - 160 GB 7 200-6 cells? -Turbo memory? No bluetooth? No camera?
  • T500 2055 (NK13AUK) - T9600 (2.8 GHz) - 4 GB - 160 GB 7 200-9 cells? -Turbo memory? Bluetooth?

  Thanks in advance.

  Thanks Amniarix

  Amniarix wrote:

  How do you find the product number "2055 - 45G ' of the part number of the manufacturer"NK145UK "?

  I'm still none the wiser.

  You ask me to reveal my secrets?

  It's simple; I just substituted for the United Kingdom with GE and happened to glance through this site. When you click on details of the TP with the correct order number, you are presented with a sheet of spec, including the MTM number which is the same for all European countries. The last two letters of the order number change; UK = UK, GE is Germany, FR = France etc etc.

  As I have said; easy

  Amniarix wrote:

  With respect to the second part of my question - can you think of a reason why I shouldn't buy one of them, a little older, models? I can easily replace the hard drive.

  If they adapt to your needs, why not buy one? They should be cheaper than current models.

• Comparison of specifications for some ASUS X 58 LGA 1366 mobos

  I'm so bored trying to evaluate different mobos ASUS channels confused ASUS lists the features of individual Council or their comparison screwed up, tool that I decided to take their information on the specification for each onboard and create a following ASUS mobos Excel spreadsheet: Sabertooth X 58, P6X58D, P6X58D-E, Rampage III Extreme and P6T7 WS Supercomputer.  Where possible, and where it seemed that the features on the different models are the same, I 'aligned' functions in a spreadsheet row.  It is not a complete nor necessarily "correct" comparison, but the total information is more apples to apples in the worksheet that was available via ASUS.

  Like many on the forum, I am considering a processor i7 - probably NOT the hexagonal base simply due to price, 24 GB of RAM and an Evga GeForce GTX470 Superclocked graphics card (possibly by adding one more later) and also add a controller RAID Areca to 12 ports to a little later.  I'd appreciate comments/prospects, others may have seen similar built of ASUS mobos with any reflection on the specific advice by report.

  For what it's worth, I'm in the middle of the construction on a new machine myself, and my selection of mobo narrowed it down to the Asus Rampage III Formula (not extreme) and the Asus Sabertooth X 58.

  I also initially thought the Asus P6T6 WS Revolution and the P6X58D Premium. I eliminated the P6T7 WS Supercomputer from the beginning because of the lack of justification for the higher price tag (I don't have the SAS ports, but I did not USB 3.0). Also the number of overall SATA ports has been reduced because of the SAS on the P6T6 and P6T7 boards.

  Rampage (Extreme vs formula) are differentiated by overclocking tools, the formula is adapted to my needs and at a lower cost compared to the extreme Board. In addition, the SATA ports are arranged is different between the two boards and I preferred the way the formula has been implemented.

  It was very difficult to choose between Sabertooth X 58 and the Rampage III Formula because they are very similar in many ways and the Sabertooth's $100 cheaper. He went down to the expansion cards. Rampage has 3 PCIe 2.0 slots, Sabertooth has 2. Also, the layout of the expansion slot lets you sacrifice the top PCI slot if you use a big GPU as the Nice CS5 most of users will want to (the Fermi cards and Quadro). I do not plan to use the PCI slot, at least not at the moment, but I hate that the slot has been placed in a place that I can't use it on the jury Sabertooth.

  Add to that the characteristics of usability on the map of the Rampage III Formula for overclocking (and the dual BIOS chips... VERY convenient if you want a separate profile of OC and a separate reference profile, or if you just want to have a backup BIOS chip on board in case you do something stupid).

  I took my Rampage III Formula Board yesterday for a little over $ 290 (without shipping or tax). I'll use an i7 950 ($249) and 24 GB of RAM ($550) with an eVGA GTX 470 Superclocked GPU ($300). And I build in a Cooler Master HAF X chassis (165 dollars), because this is a case of great air-cooled with lots of useful features (like a cover that slides over the power/reset buttons, so my son does not seek to 'help Daddy'). I will say though, the case weighs more than 30 pounds right now and there is nothing in it again... and it's huge... so, if you follow my lead on the chassis, better to first measure your editing suite.

  However, I run into a single problem... my new 1000w PSU will require a new UPS solution, since my current is only 1500VA (850w). Pricing of the solutions out there and I see very little in the sub $500 range. Ouch. need to use the RAID controller integrated well... and I guess that's a compromise decent price compared to the purchase of a RAID controller separated for about the same price.

  And one problem creates another, I need to get an electrician here to upgrade the power to my office to support a greater power of all these things.

• Satellite P200-1BA - specification for Expresscard

  I want to buy an Express card for my laptop, but I don't see all my specifications of it.

  I think that if I buy expresscard/34pin that fit for her even if I have expresscard/54type in my installed book. Fix?

  Take a look in the user manual, you will find the answer:
  The expansion card slot Express can accommodate two standard module formats; an Express Card/34 and an Express Card/54 module.

  If both types are supported.

• ASUS IPMTB-TK Pegatron card mother watt minimum / maximum specifications for the new power supply

  I need to get some update a new GPU card will need a bigger PSU but can't seem to find the specifications of power to my motherboard. I know that connections in the search of what power this motherboard is rated for.  Help, please! and thank you Asus Pegatron IPMTB-TK Intel x 58 Socket 1366 mATX

  Hello

  You should be able to use a power supply up to 650 watts.  I've seen a few posts on this forum where more than 650 Watt power supply would not work.  I have successfully used a Corsair HX650 with the same motherboard.

  You have some good recommendations for old_geekster and wb2001.

• Then Foglight to monitor a log file specific for the string "error"?

  Hello

  I was wondering if there is way for Foglight monitor a specific log on a server.

  For example, in the path below, we want to be alerted each time that the word ""Error"appears in the"FinancialReporting0.log"

  D:\mw\epm\domains\EPMSystem\servers\FinancialReporting0\logs\FinancialReporting0.log

  An error in the log file example may look like this:

  java.lang.OutofMemoryError:getNewTla

  Is this something Foglight is able to do and if so how?

  Thank you

  Tony

  I know for sure a capacity similar Logfilter will become available in the future. You can check with the management on a release date. You can do this by opening a case of pension.

  David Mendoza

  Foglight Consultant