Spectrum XT Touchsmart 15-1410n: does not detect the new hard drive

Similar Questions

• Satellite A200-1TS - Win XP does not recognize the new HARD drive

  Dear Forum,

  My HD crashed, I installed a new, but XP will not recognize.
  I created a new partition with Partition wizard home edition, and with a Mini XP bootable CD I can access Hd, reading and writing, but if I try to install XP from the CD of origin of the system does not have a usable hard drive.
  Any part of the material blocking this new HD? How can I install windows XP on a hard disk new?

  Thanks in advance for your help

  Can you please tell us what model of laptop do you have?
  Maybe you need to load the SATA driver?

• Satellite L305D-S5881 does not recognize the new HARD drive

  Ok. I've had this laptop for a while now.
  It crashed recently. So, I tried to start it up.
  I got "Winload.exe missing or damaged".

  Fortunately, I found an answer to this!
  I got the Vista installation disc and inserted.
  I had this "PAGE_ERROR_IN_NONPAGED_AREA". I fixed too. Stick of 1 GB of RAM to my computer was bad.

  So I replaced it. And during the installation, it hangs. And beeps and undesirable.
  So I thought it was my hard drive. I have a new. (http://www.toshibadirect.com/td/b2c/adet.to?poid=431567 please TAKE a LOOK BEFORE RESPONDING).

  I (try) to install and it does nothing.
  I turn it on and it goes to this page with as my enthernet info. Then I go into the BIOS and it appears. I think I could install it wrong.

  Any help?

  Hello

  I think that the new HARD drive is not recognized, because you have not installed the SATA drivers!
  The new mobile phones support the new SATA controller and especially the drivers are not included in the Windows operating system.

  So, you must first include the SATA drivers before install you the operating system.
  AFAIK the L305D supports an AMD and ATI chipset and SATA drivers must be placed in the ATI graphics driver package.

  On the other hand, you could install the operating system without the use of SATA drivers.
  I think that the BIOS must contain the SATA mode option. Usually it s set to AHCI. Pass this option in compatibility mode and you should be able to install the operating system.

  Cheers mate

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.

• Windows 7 does not recognize the new hard drive during installation

  My Pavilion hard drive died.  I ordered a new identical and it arises.  Windows 7 starts to load (since a key USB as my DVD died a long time ago) and gets it Windows on the screen asking me to select a player.  But there is no choice to drive in the menu and I can't go any further.  Is the new drive dead too?  Someone suggested that I need to reinstall a 'chip game' and if that's the problem, how to do that?  Thank you!!

  I'm glad that the hard drive is seen now.  To the extent where the DVD player, if you have purchased a new DVD player for the laptop, and you have it installed, then there is something else involved here.  In this MANUAL, it seems that it is just a simple operation change out.  Must be another reason it does not work or is recognized in the BIOS.

• Satellite 2805-S603 does not recognize the new HARD drive

  The old HDD that laptop died a horrible, another bougth - HM040HC (PATA) of Samsung, but the HARD drive is not set! What?
  Too recent for 2805 controller?
  Which one i should buy, he worked normally?

  PS: Sorry for the bad English-_-

  Seems that you have purchased a HARD drive badly and is not compatible!
  I discovered that IE Toshiba MK3017GAP HARD drive is compatible with your laptop.
  This HARD disk supports an ATA-5 interface and about 30GB.

  If you want to be sure that the HARD drive works in your laptop 100% please contact the service provider authorized in your country and order the HARD drive support.

• My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

  My computer (win 7) does not detect the new headset.

  Cannot use the microphone while I am on Skype.
  I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
  Can not see the device on the list of Audio material.
  Help?
  Thanks in advance
   
  Original title: lx1000 lifechat

  Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

  It will be useful.

• My Satellite phone does not recognize the external hard drive

  I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:

  "G / is not accessible.
  Access is denied. "

  I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.

  can someone help me? ... Thank you

  Can you please tell us which model of laptop you have exactly?
  Do you use an original preinstalled operating system?
  Are you using USB ports?
  Have you noticed the same problem using all available ports?

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• Windows 7 does not detect multiple external hard drives

  I recently bought a HP Pavilion laptop to 7 Home Premium. I have two 500 GB external hard drives. When I connect them individually to the system, they are recognized and I can copy files to and from these External Drives. But when I try to connect both at the same time, Windows 7 does not detect the drive I connect then. Any help is greatly appreciated.

  If the disks are powered by the USB bus and do not have their own external power supply the problem is that the laptop does not provide sufficient USB power to control both.

  The USB specification, is that each port should provide 500mA at 5V. To keep their batteries, laptops usually provide 500mA to share between all available ports. If you need to use several USB devices with significant power, you must either externally powered USB hub or to provide the devices with their own power supply to cutting.

• Desk top HP does not recognize the external hard drive

  My HP Envy Phoenix 810 does not recognize my external hard drive Seagate 3 TB, which is installed in the drive enclosure hard Bytec HD-35SU3-BX. Have you tried two different 3 TB HD and two boxes of Bytec and nothing works.  When I installed my 1 TB in the same pregnant, it works.  Why my computer won't allow me to use my 3 TB HDDs?  I use Windows 7 and Internet Explorer 11.

  I suggest you directly contact Bytecc and inquire 3 TB HD the HD manufacturer is supported. I had an old AZIO dock who does not identify / initial with WD drives.  It was a firmware issue.

• Windows Update does not work after new hard drive

  After you install the new hard drive, when I click on windows update, it opens, makes his scan, then I get the message, (the website has encountered a problem and cannot display the page) I have a Dell Optiplex 745 running XP Pro, Explorer 8, have tried several times and restarted, please help.

  What do you think of will be without safety last cumulative update for IE8 be manually downloaded and installed before going to windows update to nothing at all.  What will happen is the CPU at 100% and a whole lot of nothing else of fortification.

  Do not go in line with the hopes of getting the updates of windows after the installation of SP3.

  Disable automatic updates in Control Panel > automatc updates > disable automatic updates

  Start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  Get the exe to install offline full download for IE8 [should represent approximately a 16 MB file] and then install IE8 after SP3 and the decline of the ability to download updates for IE8 at installation time.

  Then manually download and install the current cumulative security for IE8 update and restart the computer.

  visit Windows Update through your browser link in the start menu.  Consent to any ActiveX install queries and validation / advantage genuine offer and cross your fingers.

  It is possible that you may still have questions, but this will reduce some of the problems if you follow the recommended sequence.

• not sure: the new hard drive installation

  I have a Desktop allows a hard disk which is a failure.  F9 during boot diagnostics say its bad.  I just got the HP recovery disk and I'm not sure that 'when' to instaqll them.  I put the OS on the new hard drive and then first run the recovery or recovery disk?

  If you have the recovery disk set for this PC, run recovery on the new hard drive.  To install everything back like it was new again.  The installation of the OS process is executing the recovery.  Install the new hard drive, and then run the set of recovery disks.

• Windows 7 does not detect my external hard drive

  Window 7 is able to detect my external hard drive under devices and printers, it is able to detect the hard drive, and there is no problem for her.  but only shows no not my external hard drive under my computer icon so I can't drag files

  
  How can I find the hard drive and put the files?
  
  Thank you

  OK follow the instructions;

  • Click the windows icon
  • Right click on computer > then click on scabies
  • on the left, under storage, click Disk Management

  now the hard tip. You must identify which is your external hard drive. It should say something like disc 1 - online (if you have other removable things such as memory card readers may be something like disk5). DO NOT TOUCH DISK 0 (c) because it is your operating system and nothing change may / will kill the system.

  It doesn't have a letter from dirve allocated on the external drive then left and right click then click on change drive letter and paths.

  Assign a new letter perhaps something like L: as who should enter into conflict with what it is then ok the windows... it should now appear.

  Yet once just to reiterate do not assign c: or touch disk 0. you have been warned.

  Here is a link with pretty pictures to help you a bit

  The most difficult part is to find what is your hard drive. Good luck. If you're worried you can take a screenshot of the management of the computer and upload it to your skydrive. We would advise you that it is.

  Hope that helps...

  Free Support Tools

• Windows 7 does not recognize the external hard drive

  A WD My Book external hard drive of 2 TB, Windows 7 Pro icon does not appear in the computer but saw the external hard drive
  in devices and printers. Right-click on the icon, no data on the volume, indicates that it works correctly. How can I access and recover
  the data on this external hard drive?

  Someone ran Testdisk and it couldn't find a partition. It might spoil the hard disk being the day the Date 07/07/2013
  Testidisk was executed.

  Any advice would be greatly appreciated! The data is lost forever? Thank you.

  There is no partition inside?

  You can create partitions on the disk management
  type of handle on the search box to the start menu, open the computer management go to disk management
  You should see your disk and associated empty data and you can create a partition for it