speech recognition bar

Similar Questions

• LX3000 microphone does not work for speech recognition can't be used

  my microphone is LX3000but I can not all the sounds of it, I try set up and he said that I was on, but no sound come by please can someone help me

  Moved from the community involvement Center

  Original title: speech recognition

  my microphone is LX3000but I can not all the sounds of it, I try set up and he said that I was on, but no sound come by please can someone help me

  The LX3000 is a USB microphone. If you are using a desktop computer, connect to a rear USB port.

  Go to sound in the control panel. Click the recording tab. You should see a USB microphone in the list. See screenshot below. Highlight the USB microphone and set it as the default. Then click on properties and then the levels tab adjust the microphone level to 75%. Click on apply and then OK. Speak into the microphone, and you should see the green bars in the volume meter going up and down. This will mean that you're all set.

  Marty

  

• Speech recognition is not all sounds during installation of the wizard.

  Sound recorder works fine and I can record, save and play wav files.  CLS recognition requires all upward before use and the recording meter bar moves I read the sentence of the sample.  After that, I get the error that SR couldn't hear anything.  Help please.

  Hi BTKpickle,

  Welcome to Microsoft Answers Forum.

  There are several possible causes of the problem:

  ·         The microphone isn't close to capture your voice. Make sure that the microphone is positioned close enough and you speak directly into it.

  ·         The microphone is cut in. Some microphones have an external control for muting. Make sure that the mute control is disabled.

  ·         The microphone input level is too low. Make sure that the microphone input level is set correctly.

  Entry level to adjust the microphone

  1. Open Audio devices and sound themes by clicking Start , clicking onto Control Panel, hardware and sound, and then clicking its.

  2. click on the recording tab.

  3. double-click on the microphone you are using speech recognition.

  4. click on the tab levels and then use the slider to adjust the entry level for your microphone.

  ·         The microphone connections are not properly attached. Make sure that microphone cables are intact and unbroken. The connections to the computer can be loose, so unplug the wires and reconnect them by ensuring that they fit.

  ·         A different microphone is selected to be used with speech recognition. If you have more than one microphone installed on your computer, that bad could be selected to be used with speech recognition. Make sure that you use the microphone selected for speech recognition.

  Change which microphone is used with speech recognition

  1. Open Audio devices and sound themes by clicking Start , clicking onto Control Panel, hardware and sound, and then clicking its.

  2. click on the recording tab.

  3. Select the microphone that you want to use with speech recognition, and then click set as default.

  Check the documentation that came with the microphone for additional troubleshooting information.

  See if you are able to complete the installation wizard.

  For solutions to common problems with Windows speech recognition, see

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• "' Error of speech recognition: voice recognition couldn't start because the language configuration is not supported.

  OP: Windows speech recognition

  Hi, I have a Dell Inspiron 1545 with Windows 7. I just put in place the Windows speech recognition and finished the installation and the tutorial. I went to use and it says:

  Speech recognition error

  Speech recognition could not start because the configuration of the language is not supported.

  The recognizer language must match the language of the user interface. Please change the recognizer language in the speech recognition under Advanced options control panel.

  I don't know what that means, I tried changing the settings under:

  Control Panel > accessibility > speech recognition > speech Advanced Options

  But nothing seems to work.

  Help!

  Hello

  Saw this in another forum and it WORKS!

  Hello

  I had the same problem. Strangely, I had other symptoms. I use the Turkish keyboard Q primary and English as secondary United States. As my speech recognition broke down, I saw that my office word and outlook mulfunctioned in what concerns the language of the keyboard. I was able to use the Turkish Q keyboard on any application, but when I open outlook or word, changes in the English language.

  It happened on xp for... so I turned on the language bar to assign the TR when I am using these applications. But the language bar never himself displayed on the bar of tasks or office. So I get this problem and I saw that you can solve this problem via regedit.

  go to computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  right click on the right and a new "string value" component name value can be by default, the value data must be set to "ctfmon" = "" CTFMON. "." EXE ".

  After that I restarted my machine and the language bar came to the taskbar. I went into applications and changing the language to TR. And there was a surprise for me. Speech recognition long gone was back at the top of the screen. (I tried everything that proposed that nothing worked)

  I'm not sure but maybe the difference in language between applications caused my problem. Or maybe ctfmon has caused. Try this one.

  I hope that this is the case for you and you can fix it too...

• Error when you try to configure the microphone for speech recognition

  I get an error:

  "The wizard could not start. Make sure that your audio is working properly and check your audio configuration Audio devices and its themes Control Panel. "My microphone and speakers are connected and working.  When I go on manage Audio devices, I can see them both and when I speak into the microphone, the green bars.  I tried a clean boot and still get the message.  Also, I get this message when I try to start speech recognition.

  Hello EllieMae,

  Thank you for posting.  It seems that your sound card device drivers could have had an error during installation.  You try to reinstall the device drivers for your sound card to possibly fix the problem.  You should be able to find any updated drivers for you computer to the manufacturer's support Web site.

  Please let me know if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Speech recognition Profile Import Export problem

  I have problems to import a profile that I put in place.  I'm upgrading my hard drives often, so I'm always import and export of different profiles.  I have run the little program "Speech Profile Manager" and I export my profile (by default and only one), but when I go on the new computer, same version of vista and everything, I get huge errors and it does not matter.  This is how it goes down:

  I have not a single program open, just after a clean boot:

  1. I run the speech profile manager

  2. I click on "Import", I find the file to import and say OPEN.

  3. it is said so "do you wish the profile imported by default?"  I click Yes

  Image here: http://tagr.org/images/Default_Profile.jpg

  4. He said to them 'the microphone settings must be granted before use... You want to now? "I click Yes.

  Speech at startup and then switch to sleep mode and that this error pops up:

  WARNING: Engine target () of the profile is not available.

  Profile data has been imported, but won't work for the missing engine.  If you install the engine at a later date, please fun the microphone Wizard.

  And then 1 million errors is the first:

  "ERROR: cannot create (Files\1033\L1033.tpc) key in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/Yes_To_Mic_Wizard.jpg

  If I say no the Microphone Wizard, I get an another huge list of errors, but a different number:

  "ERROR: cannot create the key (Files\TrainingAudio-0409-10C902C1-A71A1D60) in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/No_To_Mic_Wizard.jpg

  I don't even have office on this computer.  Profile is certainly not the profile, I spent months tweaking. It's a blank profile.

  I tried Yes and no on each option, micro USB plugged out, jack mic 1/8 '' plugged in, I tired it work on 3 different Installations of Vista. I tried to re - export profile several times. I get a similar set of mistakes every time.

  Help!

  The software that you are using was built in fact older versions of Windows and is not listed as compatible with Windows Vista. I apologize because I was under the impression that you imported files to an old Windows XP system running the Tablet PC edition or Office 2003 because the error indicating "target engine () of the profile is not available." and the use of the older tool. Resource: speech recognition Profile Manager tool

  Speech recognition Profile Manager tool is now obsolete, because vocal training files can now be migrated using the Easy Transfer Wizard. The wizard is available for Windows XP via download and integrated in all Installations of Windows Vista.

  To transfer voice (including the training files) user profile settings, please perform the following steps:

  -Click on the ORB start and type EASY in the search bar, click Windows Easy Transfer icon that appears - this will launch the wizard:

  

  -Click Next - select start a new transfer
  -Choose my old computer
  -Choose to use a CD, DVD, or other removable media (even to memorize the settings on the local hard disk)
  -Select the external hard drive or to a network location (even memorize settings on the local hard disk)

  

  -Under Choose a network location, you can use the parameter to copy the files to your local hard drive by default:

  

  -Choose any user account or my user account
  -If you make a transfer from one account to another on the same computer or on a single account on another computer, then you choose the my account of yser option

  -Choose advanced options will give you the choice to transfer only specific items in your account
  -You can use this for example to transfer only files sounds and speech recognition and clear all other check boxes
  -Once your choice, click on the wizard checks to see what items are able to transfer
  -At this point, you will notice that all the items that are selected to be transferred, by default all data application, Documents, items of office and preferences, Internet Explorer, and Windows settings are selected whose sounds and speech recognition:

  
   
  -Here you can choose again customize to select specific items you would like to be transferred after clicking on the transfer of your objects will be stored at the selected location

  -To import all items to another profile on the same computer or on another computer, you will need to re-run the wizard and select a current transfer and a new computer, and then point to the location of the files previously exported.

• Speech recognition Windows 'that was it. "

  I try to use the recognition voice to dictate into a program windows open.  I have trained with success the program give me a reasonable accuracy in Word Pad.  However, whenever I speak in the open program, I get an error that says 'that was it. "  I can't dictate to all.  I am also unable to dictate into the search bar in my browser, google chrome.   How can I get windows speech recognition works correctly?

  It should work in other things such as Notepad or Microsoft Word or Outlook.  But it is a very old engine (the recognition system which is since 2002 and is all self-contained, where modern (and more accurate) speech recognition systems then send your speech to a powerful server, it returns the text.) That's how Google Android, iPhone and Windows Phone do.

  Windows (finally) will get this same capability year in Windows 10 next.

• Speech recognition - commands to complete the forms?

  I try to fill in a form on a Web site using voice input with speech recognition and have two problems that make it impossible to go further.

  (1) I know not how to access drop-down lists and interact with them to choose the one I want.

  (2) when I fill in a text field in a form, it is not always interpret that I finished the text dictating and I need to move to the next field. I tried 'tab', 'next' etc, but it does not work.

  (3) it offers me a 'select by numbers' suggestion but just for the navigation bar, not the fields in the form.

  For reference, this is the form, I'm looking at: http://www.princes-trust.org.uk/need_help/enquiry_form.aspx

  Can someone explain how this is done?

  I try to fill in a form on a Web site using voice input with speech recognition and have two problems that make it impossible to go further.

  (1) I know not how to access drop-down lists and interact with them to choose the one I want.

  (2) when I fill in a text field in a form, it is not always interpret that I finished the text dictating and I need to move to the next field. I tried 'tab', 'next' etc, but it does not work.

  (3) it offers me a 'select by numbers' suggestion but just for the navigation bar, not the fields in the form.

  For reference, this is the form, I'm looking at: http://www.princes-trust.org.uk/need_help/enquiry_form.aspx

  Can someone explain how this is done?

  It may take a few tries. I have found next field, or go to the next field and press Tab or press return Tab works normally. Saying: Drop Down List or press arrow down should work to go down a list and then say move down one or move to the low four etc.

  Marty

• program speech recognition on Windows 7 and Vista sense microphone input

  One of my friends tries to use the text-to-speech program built into Windows 7 and Vista, on their computer and laptop computer - with a brand new microphone and using a USB plugin and an audio input jack. All we ever get is a if you asking the window of our "MIC is muted.

  We need this thing to work. And please don't tell us 'optimize our browser '. We don't need this kind of nonsense lazy, evasive. We want to know why this specific programme will not work. Thank you.

  One of my friends tries to use the text-to-speech program built into Windows 7 and Vista, on their computer and laptop computer - with a brand new microphone and using a USB plugin and an audio input jack. All we ever get is a if you asking the window of our "MIC is muted..."

  Connect the USB microphone (to aft port on a desktop computer, any port for laptop). Then right click on speaker icon lower right task bar. Click recording devices. Highlight the USB microphone. Speak into the microphone. Green bars should move up and down like you're talking about. If they do not, click Properties and then the levels tab level slider move to 100%, click OK and test speaking into the microphone again to see if green bars go up and down. If they don't, try a different USB port.

  For the analog microphone test the same way. Use a Mic back in port, not one alone on the front or on a monitor.

  Microphone work, go into Control Panel, speech recognition, and microphone Set prior to the formation of WSR (Windows speech recognition).

  Markoe Marty

• Windows speech recognition macros

  I downloaded Windows Speech recognition Macros of http://www.microsoft.com/en-us/download/details.aspx?id=13045 but after I install successfully I search for it in My Search Bar and I Just Get Windows Speech Recognition Macros, a .lnk file and I don't know what to do next as he tells me that the software disappears. Help, please. Thanks in advance!

  I have
  Windows 7 operating system

  I downloaded Windows Speech recognition Macros of http://www.microsoft.com/en-us/download/details.aspx?id=13045 but after I install successfully I search for it in My Search Bar and I Just Get Windows Speech Recognition Macros, a .lnk file and I don't know what to do next as he tells me that the software disappears. Help, please. Thanks in advance!

  I have the Windows 7 operating system

  If the program is installed successfully, it is located at:

  C:\Program Files (x 86) \WSRMacros

  The folder should be four files, the executable file is:

  WSRMacros.exe

• How to reinstall Windows speech recognition?

  It essentially says Windows 7 speech recognition captures everything very well, exactly what the words I say but does not execute the command. So after much research I decided that I probably need to reinstall speech recognition Windows 7.

  I think that all this has happened when I did a few macros... However when I disable macros it still does not work.
  Can you link me to it?

  It essentially says Windows 7 speech recognition captures everything very well, exactly what the words I say but does not execute the command. So after much research I decided that I probably need to reinstall speech recognition Windows 7.

  You cannot reinstall WSR, because it is an integral part of Windows. Moreover, I do not have to reinstall

  Windows would be useful.

  What do you mean when you say it picks up everything beautiful?  Do you want to say that you see the exact words in the speech bar where it says listen to? The most common reason for this problem is that you started WSR after the program that you want to work. Close the program, start WSR, then restart the program.

  If you still have the problem, you should know:

  1 have. WSR you worked in the program?

  2. what programs you try to use it?

  3. what specific commands you issue?

• speech recognition with Windows 7 no longer works

  I started using speech recognition in Windows 7 a few weeks ago. It was working great until yesterday when he stopped working for no apparent reason. I used the troubleshooter without success. Help, please. Thank you!

  I started using speech recognition in Windows 7 a few weeks ago. It was working great until yesterday when he stopped working for no apparent reason. I used the troubleshooter without success. Help, please. Thank you!

  When you say that it has stopped working, can you be more specific? For example:

  • When you try to start the WSR (Windown Speech Recognition) the speech bar appear?
  • Are you able to turn on the microphone?
  • Have you tried runnning utility all microphone of the Control Panel, speech recognition Options?
  • What mic do you use? Have you checked to see if it is connected and correctly connected?
  • If the microphone is connected properly, there as default recording device?

  Marty Markoe, , eMicrophones, Inc.
  Microsoft 2011 MVP

• Speech recognition in Windows 7 listen

  I bought a headset and configure Windows 7 first speech today. I made the tutorial and some training and went through the commands and use everyday so far. Suddenly no matter what I say to her, he just is sitting there or said what was it? I know that my mic is picking up my voice because I can see that bars moving like one I speak and I tried to register with it, and it works. So I am at a loss about why my computer wants to act as my 1 year child and listen to me all of a sudden. Help, please!

  I bought a headset and configure Windows 7 first speech today. I made the tutorial and some training and went through the commands and use everyday so far. Suddenly no matter what I say to her, he just is sitting there or said what was it? I know that my mic is picking up my voice because I can see that bars moving like one I speak and I tried to register with it, and it works. So I am at a loss about why my computer wants to act as my 1 year child and listen to me all of a sudden. Help, please!

  Restart the computer. Launch WSR, Windows speech recognition, before any other program and it should work.

• Qosmio X 500 does not hear me using speech recognition / microphone

  Hello!

  I often use the voice recognition feature Win7 Ultimate.
  However, since a few days, the computer does what I say more.

  Now, the built-in microphone is very insensitive: I have to get as close as in 10-15cm from the microphone in order to get acceptable results. I don't know what has changed... never had problems before.

  When I try to do speech recognition, training my computer just can't hear me (at least it seems that Yes)...

  I don't know what to do...

  Thanks for your help!

  Concerning
  Mario

  Hello

  I think you should check the volume level of the microphone.
  Go to control panel of-> sound-> recording tab

  Here you can see the Microphone device.
  Now, check it and click on the properties button
  Now new window pops up and here you have to choose the 3nd tab
  Here, you can increase the volume of the microphone.

• Satellite A30: Software Dragon Naturally Speaking speech recognition does not work!

  I am unable to get the speech recognition program 7.3 Preffered Dragon Naturally Speaking version to operate successfully on my laptop Satellite A30 P4, using Windows XP as the operating system. It works fine on my PC of similar specs as the Satellite A30. Speech recognition is very poor indeed with the Toshiba laptop. He was sent to the seller twice, but the problem is still not resolved. I know that this Dragon program works fine on other laptops.

  He is also unable to play some of my CD.

  I would like to know if the portable technology is unable to operate with Dragon speech recognition, or is the problem with the A30 series or with my specific computer?

  What characteristic specifications are necessary for the performance of Dragon with success of the Toshiba A30? This microphone is necessary? How many and what types of RAM? An additional sound card can be inserted into the laptop to improve performance?

  Help, please! Anyone with experience with Dragon speech recognition? What could be the problem of CD?

  [Edited by: admin on 19 June 05 14:33]

  Hello

  It's specific software problem and it is not easy to tell what can be the problem. In my opinion, it may be that his card on this unit has no performance you want. Sorry but I have no other explanation.

  These problems can be solved simply by contacting the producer of software because they have much more experience in troubleshooting.