Speech recognition Windows 'that was it. "

Similar Questions

• Speech recognition Windows 7 they can recognize and differentiate more than one voice on a record? Thank you.

  Want to record meetings with a variety of participants

  and I wish I could have to transcribe speech recognition

  the minutes, preferably in Word 2010.  Thanks for any help

  on this page or any direction, I might take to accomplish this task.

  Hi Susan,.
  
  Welcome to the Microsoft Community and we offering the opportunity to help you.
   
  Depending on the issue, it appears that you want to install speech recognition to recognize several user profiles, but they must be put in place to recognize every voice.
   
  I suggest you refer to the link configure speech recognition for several user profiles by accessing the options of speech in advance.
   
  You can check the link to do so:
   
  http://Windows.Microsoft.com/en-us/Windows7/setting-speech-options 
   
  It will be useful.
   
  Please write us if you have any related issue of Windows.

• How do I re-tab a window that was non-onglet of the enforcement framework?

  I use the framework of the app, with documents in tabs. Sometimes I do physically drag a document on its tab (usually to see one on a different resolution without chrome P monitor ' shop). However, once I've not listed offline, I can't understand how to recover it in a tab in the Application. I resort to close the document and reopen the file > open and P'shop it reopens in a tab within the Application.

  I tried to drag the untapped window as part of the application, the top bar hovering over various regions as part of the application, and I looked for a're-tab window' function in all menus. Also tried to turn my document workspace and the. Could not find a way to get him back in there without closing and re-opening.

  Thanks for any help!

  Or window > arrange > consolidate all to tabs

  Note: In my screenshot shortcuts are not standard and custom, but _very_ useful to drag objects between documents.

  

• Windows speech recognition stops randomly with the error: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. »

  Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.

  I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.

  I tried to restart and it did not help at all. Please, can someone help me? Please?

  Hi Alicia,.

  1 update you tried to install?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Step 1:

  Check the updates that are installed recently.

  You can view the following link to check the installed updates:

  See the Windows updates are installed

  Step 2:

  You can uninstall these updates and try to install the update one at a time and check for the issue.

  Remove an update

  Method 3:

  You can also try a system restore to a restore point before the updates were installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Windows speech recognition with webcam microphone

  Hi I have a question to be able to use speech recognition in windows that I have to buy a microphone or can I use the microphone on my webcam (logitech hd webcam c615)?

  Hello

  You can use the built-in mic on webcam with speech recognition Windows on Windows 7. It is not necessary to connect an external microphone to use the Windows speech recognition.

  For more information, see the articles:

  Set up speech recognition

  Set up your microphone for speech recognition

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• How to reinstall Windows speech recognition?

  It essentially says Windows 7 speech recognition captures everything very well, exactly what the words I say but does not execute the command. So after much research I decided that I probably need to reinstall speech recognition Windows 7.

  I think that all this has happened when I did a few macros... However when I disable macros it still does not work.
  Can you link me to it?

  It essentially says Windows 7 speech recognition captures everything very well, exactly what the words I say but does not execute the command. So after much research I decided that I probably need to reinstall speech recognition Windows 7.

  You cannot reinstall WSR, because it is an integral part of Windows. Moreover, I do not have to reinstall

  Windows would be useful.

  What do you mean when you say it picks up everything beautiful?  Do you want to say that you see the exact words in the speech bar where it says listen to? The most common reason for this problem is that you started WSR after the program that you want to work. Close the program, start WSR, then restart the program.

  If you still have the problem, you should know:

  1 have. WSR you worked in the program?

  2. what programs you try to use it?

  3. what specific commands you issue?

• Built in microphone will not pick up sound for Windows speech recognition

  My Dell Inspiron 1545 with a built-in mic, but for some reason any it don't will pick up any sound at all for the Windows speech recognition (Windows Vista).

  Hi Matthew,
   
  Thank you for writing to Microsoft Windows Vista Answers.

  Have you checked to see if the correct settings have been selected for the microphone in the computer?

  Try to access the control panel > Sound > Audio. Check the recording tab if the Microphone is on and working. Click on set up and once you see the working driver (i.e., reacts to your voice), right click on it and the default value.

  Later try to put in place the program of speech recognition in all programs > Accessories > accessibility > Windows speech recognition and try settings different microphone to the edge we respond to your voice.

  You can also try to update the audio drivers. Access the link below and try to download the drivers.
  http://support.Dell.com/support/downloads/DriversList.aspx?OS=WLH&OSL=en&catid=-1&impid=-1&SERVICETAG=&SystemID=INSPIRON1545&hidos=WLH&hidlang=en&TabIndex=

  Also access the link below to troubleshoot the integrated Webcam and digital Microphone array in PC Dell laptop:
  http://support.dell.com/support/topics/global.aspx/support/dsn/document?c=us&l=en&s=gen&docid=397D0C4AF7AA90D8E040A68F5B283A3E&journalid=6DD6C133CFD8091CE040AE0AB5E16CFC&Query=d2ViY2Ft&SystemID=INS_PNT_PM_1520&ServiceTag=&contenttype=-1&os=-1&component=-1&lang=-1&doclang=en&toggle=true#5
   
  Hope one of these AIDS.

  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I disable speech recognition on windows 7 for good?

  Whenever I start the computer, it starts and my TV or radio starts to change things around on my computer. Can I close the program by clicking on the X but how calm it starts when I start my computer?

  Hello

  Control Panel - speech recognition.

  See the pictorial 2nd here - uncheck run speech recognition at the start

  How to change speech recognition Windows 7 settings

  http://www.Dummies.com/how-to/content/how-to-change-Windows-7s-speech-recognition-settin.html

  I hope this helps.

• "' Error of speech recognition: voice recognition couldn't start because the language configuration is not supported.

  OP: Windows speech recognition

  Hi, I have a Dell Inspiron 1545 with Windows 7. I just put in place the Windows speech recognition and finished the installation and the tutorial. I went to use and it says:

  Speech recognition error

  Speech recognition could not start because the configuration of the language is not supported.

  The recognizer language must match the language of the user interface. Please change the recognizer language in the speech recognition under Advanced options control panel.

  I don't know what that means, I tried changing the settings under:

  Control Panel > accessibility > speech recognition > speech Advanced Options

  But nothing seems to work.

  Help!

  Hello

  Saw this in another forum and it WORKS!

  Hello

  I had the same problem. Strangely, I had other symptoms. I use the Turkish keyboard Q primary and English as secondary United States. As my speech recognition broke down, I saw that my office word and outlook mulfunctioned in what concerns the language of the keyboard. I was able to use the Turkish Q keyboard on any application, but when I open outlook or word, changes in the English language.

  It happened on xp for... so I turned on the language bar to assign the TR when I am using these applications. But the language bar never himself displayed on the bar of tasks or office. So I get this problem and I saw that you can solve this problem via regedit.

  go to computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  right click on the right and a new "string value" component name value can be by default, the value data must be set to "ctfmon" = "" CTFMON. "." EXE ".

  After that I restarted my machine and the language bar came to the taskbar. I went into applications and changing the language to TR. And there was a surprise for me. Speech recognition long gone was back at the top of the screen. (I tried everything that proposed that nothing worked)

  I'm not sure but maybe the difference in language between applications caused my problem. Or maybe ctfmon has caused. Try this one.

  I hope that this is the case for you and you can fix it too...

• Speech recognition turns off randomly

  My speech recognition Windows 7 randomly turns off. It happens sometimes after only a few minutes and other times it stays on for a while. Seems to happen faster when it is in mode ensures that when the microphone is open to dictation but happens eventually in any case. Already closed the power management which did not help but do not know what else to try. Would not be a big deal, but I am disabled and every time it turns off it is difficult for me to use the mouse to wake it up. It works fine for me when it stays on, but it's pretty useless when it goes off after 5 minutes. I know it is integrated in Windows 7 and cannot be uninstalled and reinstalled but I was wondering if there was a way to run a repair or anything else I could try? Thank you

  Hello RockBottom73,

  I suggest you try Power different configuration to see if done setting a difference.
  There is also a powercfg command-line utility that could help with some configuration settings that you can apply.

  Go to the command prompt, right click and select "Run as Administrator" and then make some queries with the switches.

  I hope this helps.

  Marilyn

• Speech recognition in Vista and Excel software.

  Two questions:

  Can I enter text/data in Excel by using the speech recognition software that comes with Vista?

  Can I do this using only a microphone or a digital voice recorder work?  Or is there another method other than a microphone that would work?

  "Known issues".

  Dictation

  You may experience the following problems when you use speech recognition.

  Dictation speech recognition works in a limited set of applications that support a technology called Text Services Framework. This set of applications includes:
  Microsoft Word and Outlook
  Virtually all applications that are part of Windows Vista

  Dictation will not work in many applications. These include, but not limited to:
  Microsoft PowerPoint
  Excel
  WordPerfect
  Eudora
  Lotus Notes '.

  Guide step by step Windows Vista speech recognition
  http://msdn.Microsoft.com/en-us/library/bb530325.aspx

  "Phil Adams.
  Speech recognition
  It is always disconcerting that Microsoft (VISTA or Windows 7), again didn't match the overall flexibility of voice recognition they made in Office 2003 running on XP. This combo has given you the speech recognition in Word, Excel, and PowerPoint, as well as many commnads. Now, they have very slightly better accuracy but only in Word and a wider range of commands.

  Cannot expect to make progress to be linear, but it is difficult to imagine how thye has lost the ability to interface with other office products. »

  http://www.brighthub.com/computing/Windows-platform/reviews/621.aspx

  http://www.Google.com.au/search?q=Excel+using+the+voice+recognition+software+that+comes+with+Vista&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = 78jMS-3lNIze7AO_qqTzAg

  Digital voice recorders and speech recognition - facilitating the transcript
  http://www.articlesbase.com/technology-articles/digital-voice-recorders-and-speech-recognition-making-transcription-easy-1000762.html

  http://www.google.com.au/search?hl=en&RLS=com.Microsoft%3Aen-au%3AIE-SearchBox&q=%22digital+Voice+Recorder%22+Speech+Recognition+Vista&btnG=Search&Meta=&aq=f&aqi=&AQL=&OQ=&gs_rfai=

• Speech recognition - recognition language is not language User Interface problem

  I want to get Windows 7 speech recognition to work with British English, but I get an error after the training, that the language of the speech recognition is does not match the language of the user interface. I got the thing defined in the locale UK and speech recognition in British English. Several people have suggested:

  • Change regional settings, restart, change back again, reboot. Does not...
  • Turning off the box that says look at my documents. Does not solve.
  • make a Windows 7 reinstall. Can't do like no Windows 7 no install disc came with the PC.

  Can someone help me solve this problem? Where is the language of the User Interface set? Would - this something to do with Office 2010?

  There is anecdotal evidence that the use of like CCleaner registry cleaners can cause this problem.

  Speech recognition Windows 7 CCleaner
  http://Forum.Piriform.com/index.php?showtopic=21936

  Speech recognition could not start because the configuration of the language is not supported. The recognizer language must match the language of the user interface.
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/5ba2cf1b-E97D-46d7-924D-b14007581786

  Have you contacted the manufacturer of your machine to see what the repair and the machine has recovery options?  Maybe he has a hidden recovery that is quite common nowadays for the OEM partition?  This should be mentioned in the manual or on their Web site.

• Speech recognition is available for use in Italian?

  I'm looking for a speech recognition program that allows dictation in Italian. Can I use the version of Windows 7 for this? If so, how can I change the input language? Thank you.

  Hello

  What version (Home, Professional, ultimate) is installed on the computer?

  Windows speech recognition is only available when the language of the operating system matches the language of Windows speech recognition. You can change the language of the operating system by installing a language pack from Windows Update. If you install the language pack for a supported language of Windows speech recognition, you can then use Windows speech recognition to this language if it is also the language of the operating system.

  Refer to this article:

  Windows speech recognition language must be identical to the language of the operating system in Windows Vista
  (Also applies to Windows 7)

  You can use speech recognition in another language if a MUI language pack is installed for one of the supported languages. 35 MUI language packs are no longer available
  in the Ultimate and Windows 7 Enterprise editions.

  See the following article:

  Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise

  I hope this helps.

• Windows speech recognition keeps closing

  Hi all

  I have implemented recognition voice Windows last night and everything was working fine. I installed Windows speech recognition which worked well as Macros. Naturally, I was stopped for the night and went to bed.
  Today, when I turned on my computer, I noticed that speech recognition have upward haven't started with him as he was supposed to.
  Long story short, after trying to get it to bot, I noticed that the process was starting when I started WSR but it was only 12 seconds and then stop.
  I restarted my computer several times for nothing doesn't. I checked the event log and found nothing in the speech of search terms or sapisvr (WSR process). I can run the tutorial and that works very well. I can also run speech recognition Training(I have actually completed it a few times just to see what would happen).  I also connected as long as another user on my computer to do the test and it worked on this user (again, so set it up).
  Anyone have any ideas? I'm fresh out.
  Kind regards
  Aaron Ball
  Specifications of the computer:
  OS: Vista Ultimate 32 bit
  Processor: Intel Centrino Duo (1.86 gHz)
  RAM: 2 GB
  HARD drive: 250 GB with 94 free concerts.

  -Best regards, Aaron Ball

  Hi all:

  A few days ago, I thought about it and had an epiphony.
  Because making a repair reveals exactly what the question here is, why not just create another user profile (since it works too), and copy my stuff. It takes less time, that's for sure.
  I created a new profile and all my old files copied to it and set up speech recognition again. I reinstalled the program macro (what a wonderful idea it was) and restarted several times to confirm that speech recognition will continue to work. It's been a few days now and I have not had problems yet. (Good call on this JohnD)
  Brent, if this question once again, I'll try the upgrade on site. This time I'll remember to bring my vista install disk with me so I don't have to wait however long again to solve the problem.
  I'm really curious to know why this problem occurred again. I guess that's probably something unique to my case where a file has been corrupted or something similar. Well.
  Thank you for all your help. I'll post here if the question should arise again. That is is not the case, I would say that this issue is resolved. Thanks again to all.
  Kind regards
  Aaron Ball

  -Best regards, Aaron Ball

• Speech recognition words randomly then added that I don't speak

  It seems back on my breathing or other noises and interpreted as words.  For example: "with this up to the application that has kept the ' just showed upward in MS Word while I was thinking of what to say next.  Is there a way to prevent speech recognition to recognize no voice sounds like the words?  I moved my microphone further away from my mouth and that reduced the problem, but he has not ruled out.

  Hello

  Method 1:

  If possible I suggest you to change your microphone and check. You can also check if your present micro connections are adequate.

  Method 2:
  The microphone input level may be too high. Lower the input level. Make sure that the microphone input level is set correctly.

  To adjust tracking entry-level micro markets below-

  (a) Open Audio devices and sound themes by clicking the Start button, clicking Control Panel, hardwareand audio, then clicking on his.

  (b) click on the recording tab.

  (c) double-click the microphone you are using speech recognition.
  (d) click the levels tab, and then use the slider to adjust the entry level for your microphone.

  You can also check the help on the question link - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  Method 3:

  You can reduce the effects of electromagnetic noise by isolating your microphone in one of the following ways:
  (a) using a microphone (USB) universal serial bus.
  (b) position your microphone as far from the computer as possible.
  (c) ensure that cables and printers are not close to your computer.

  You can also reduce background noise with a reducer of high quality sound microphone. Also, remember to speak as clearly as possible and at a steady pace. Confused speech or very fast speech is often not recognized and causes inaccurate results.

   

  I hope this helps.