Speech recognition ceased to recognize my logitech microphone

Similar Questions

• Speech recognition does not recognize dictated.

  Recognization of speech is dictated not recognized as dictation, includes only orders. It is a novelty because when I started using it it worked fine. The microphone is very good because he always hears commands and responds correctly. Any ideas? Please, I beg you.

  Hi Mlee,

  Control Panel-> speech-> speech options Advance open pick and choose the language (English in the United States). Try the word by far.

  There are several ways to correct mistakes made during dictation. You can say "correct that" to correct the last thing you said. To correct a single word, say "correct" followed by the word that you want to correct. If the word appears several times, all instances are highlighted and you can choose the one you want to correct. You can also add words that are often misunderstood or not recognized by using the speech dictionary.

  To use the alternates Panel dialog box

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Do one of the following:

     • To correct the last thing you said, say "correct that."

     • To correct a single word, say "correct" followed by the word that you want to correct.

  4. In the Group of alternates dialog box, say the number next to the item you want, and then on "OK".

     Note

     • To change a selection, in the Group of alternates dialog box, say "Spell" followed by the number of the item you want to change, click 'OK '.

  Use the speech dictionary

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Say "open Speech Dictionary."

  4. Do one of the following:

     • To add a Word to the dictionary, click or say add a new Word, and then follow the instructions in the wizard.

     • To prevent a specific word of dictation, click or say prevent a Word from dictation and then follow the instructions in the wizard.

     • To correct or delete a word that is already in the dictionary, click or say change existing words, and then follow the instructions in the wizard.

       A speech profile has not been created. You can train your computer to better understand you by creating a voice profile that your computer uses to recognize voice commands.

       To create a voice profile

       1. Click to open speech recognition.

       2. Click Train your computer to better understand you, and then follow the instructions

          Thankzzzzz

• Speech recognition does not recognize as a word processor Open Office

  How can I get speech recognition to let me dictate in Open Office?

  http://www.oooforum.org/

  I suggest that you ask the members on the Forums of Office Open above.
  They must have knowledge of this.

  See you soon. Mick Murphy - Microsoft partner

• Speech recognition works does not in tutorials

  Original title: speech recognition works do not randomly think I say back, but does not recognize me in tutorial.

  I can't set up the microphone, but the microphone works for online games, the program thinks I say back when I don't say anything. I can't follow the tutorial, because it does not. It makes me crazy. Thank you

  Hi Bradsnoe81,

  You can try to set the speech recognition again and check if it works.

  Step 1:

  Set up speech recognition

  a. open the speech recognition Options by clicking the Start button, clicking Control Panel, on ease of access, and then clicking Speech Recognition Options.

  b. click Configure microphone.

  c. follow the on-screen instructions.

  Set up speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognition

  Also check if the microphone has been installed properly.

  Links:

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  Step 2:

  If you're still having problems, and then try again to create a new user account and check if the problem occurs:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Words are displayed automatically while dictating to speech recognition

  Original title: speech recognition
  My speech recognition works very well except for a really irritating problem. If I fall silent, it will print a series of... of... or if if if. I am very experienced with speech recognition - I used the Dragon for years and have a very good headphones so what goes wrong? If I say 'new line' it will always put a 'from' front the word I say to start the new paragraph. Help please?

  Hello

  Are what program you trying to dictate to the breast?

  If you use a third party software, then try to use Word or Notepad and check if it makes a difference.

  If you already use speech recognition in Word, you can use the speech dictionary to exclude these words (which appear automatically) dictation. You can also
  Add words that you frequently use that speech recognition does not recognize.

  To open the speech dictionary:
  a. make sure that speech recognition is running and then say "open Speech Dictionary."
  b. click or say add a new Word or prevent a Word from dictation and then follow the instructions in the speech dictionary Wizard.

  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows speech recognition with webcam microphone

  Hi I have a question to be able to use speech recognition in windows that I have to buy a microphone or can I use the microphone on my webcam (logitech hd webcam c615)?

  Hello

  You can use the built-in mic on webcam with speech recognition Windows on Windows 7. It is not necessary to connect an external microphone to use the Windows speech recognition.

  For more information, see the articles:

  Set up speech recognition

  Set up your microphone for speech recognition

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Qosmio X 500 does not hear me using speech recognition / microphone

  Hello!

  I often use the voice recognition feature Win7 Ultimate.
  However, since a few days, the computer does what I say more.

  Now, the built-in microphone is very insensitive: I have to get as close as in 10-15cm from the microphone in order to get acceptable results. I don't know what has changed... never had problems before.

  When I try to do speech recognition, training my computer just can't hear me (at least it seems that Yes)...

  I don't know what to do...

  Thanks for your help!

  Concerning
  Mario

  Hello

  I think you should check the volume level of the microphone.
  Go to control panel of-> sound-> recording tab

  Here you can see the Microphone device.
  Now, check it and click on the properties button
  Now new window pops up and here you have to choose the 3nd tab
  Here, you can increase the volume of the microphone.

• LX3000 microphone does not work for speech recognition can't be used

  my microphone is LX3000but I can not all the sounds of it, I try set up and he said that I was on, but no sound come by please can someone help me

  Moved from the community involvement Center

  Original title: speech recognition

  my microphone is LX3000but I can not all the sounds of it, I try set up and he said that I was on, but no sound come by please can someone help me

  The LX3000 is a USB microphone. If you are using a desktop computer, connect to a rear USB port.

  Go to sound in the control panel. Click the recording tab. You should see a USB microphone in the list. See screenshot below. Highlight the USB microphone and set it as the default. Then click on properties and then the levels tab adjust the microphone level to 75%. Click on apply and then OK. Speak into the microphone, and you should see the green bars in the volume meter going up and down. This will mean that you're all set.

  Marty

  

• Error when you try to configure the microphone for speech recognition

  I get an error:

  "The wizard could not start. Make sure that your audio is working properly and check your audio configuration Audio devices and its themes Control Panel. "My microphone and speakers are connected and working.  When I go on manage Audio devices, I can see them both and when I speak into the microphone, the green bars.  I tried a clean boot and still get the message.  Also, I get this message when I try to start speech recognition.

  Hello EllieMae,

  Thank you for posting.  It seems that your sound card device drivers could have had an error during installation.  You try to reinstall the device drivers for your sound card to possibly fix the problem.  You should be able to find any updated drivers for you computer to the manufacturer's support Web site.

  Please let me know if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Built in microphone will not pick up sound for Windows speech recognition

  My Dell Inspiron 1545 with a built-in mic, but for some reason any it don't will pick up any sound at all for the Windows speech recognition (Windows Vista).

  Hi Matthew,
   
  Thank you for writing to Microsoft Windows Vista Answers.

  Have you checked to see if the correct settings have been selected for the microphone in the computer?

  Try to access the control panel > Sound > Audio. Check the recording tab if the Microphone is on and working. Click on set up and once you see the working driver (i.e., reacts to your voice), right click on it and the default value.

  Later try to put in place the program of speech recognition in all programs > Accessories > accessibility > Windows speech recognition and try settings different microphone to the edge we respond to your voice.

  You can also try to update the audio drivers. Access the link below and try to download the drivers.
  http://support.Dell.com/support/downloads/DriversList.aspx?OS=WLH&OSL=en&catid=-1&impid=-1&SERVICETAG=&SystemID=INSPIRON1545&hidos=WLH&hidlang=en&TabIndex=

  Also access the link below to troubleshoot the integrated Webcam and digital Microphone array in PC Dell laptop:
  http://support.dell.com/support/topics/global.aspx/support/dsn/document?c=us&l=en&s=gen&docid=397D0C4AF7AA90D8E040A68F5B283A3E&journalid=6DD6C133CFD8091CE040AE0AB5E16CFC&Query=d2ViY2Ft&SystemID=INS_PNT_PM_1520&ServiceTag=&contenttype=-1&os=-1&component=-1&lang=-1&doclang=en&toggle=true#5
   
  Hope one of these AIDS.

  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Speech recognition for laptop Dell says he can hear me, but it won't recognize voice commands.

  I'm trying to implement recognition voive and my computer laptop dell Inspiron running windows 7. He says he "can not hear me. the settings for recording are turned upward and the grid light up answers when I speak. I do not use an externel microphone. Why can't I configure speech recognition?

  original title: recognotion Voice can't hear me

  Hello

  What speech recognition program do you use?

  You can try the steps in the link and check if it helps to solve the problem.
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266424

  
  See also steps from the links for more information:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows7/set-up-your-microphone-for-speech-recognition
  Set up your microphone for speech recognition
  http://Windows.Microsoft.com/en-us/Windows7/set-up-your-microphone-for-speech-recognition

• program speech recognition on Windows 7 and Vista sense microphone input

  One of my friends tries to use the text-to-speech program built into Windows 7 and Vista, on their computer and laptop computer - with a brand new microphone and using a USB plugin and an audio input jack. All we ever get is a if you asking the window of our "MIC is muted.

  We need this thing to work. And please don't tell us 'optimize our browser '. We don't need this kind of nonsense lazy, evasive. We want to know why this specific programme will not work. Thank you.

  One of my friends tries to use the text-to-speech program built into Windows 7 and Vista, on their computer and laptop computer - with a brand new microphone and using a USB plugin and an audio input jack. All we ever get is a if you asking the window of our "MIC is muted..."

  Connect the USB microphone (to aft port on a desktop computer, any port for laptop). Then right click on speaker icon lower right task bar. Click recording devices. Highlight the USB microphone. Speak into the microphone. Green bars should move up and down like you're talking about. If they do not, click Properties and then the levels tab level slider move to 100%, click OK and test speaking into the microphone again to see if green bars go up and down. If they don't, try a different USB port.

  For the analog microphone test the same way. Use a Mic back in port, not one alone on the front or on a monitor.

  Microphone work, go into Control Panel, speech recognition, and microphone Set prior to the formation of WSR (Windows speech recognition).

  Markoe Marty

• Microphone picks up foreign sounds other than my usign speech recognition speech.

  Only to learn how to use speech recognition on my Windows 7 laptop.

  Training of speech for Setup microphone went very well...

  .. up to - the microphone picks up foreign sounds other than my speech.

  It displays the message title that was it?

  I then wait for the message to disappear before I continue to talk.

  There are some answers that I can talk to that speech recognition is programmed to accept for that matter?

  Thank you

  Hi John,.

  I understand the inconvenience caused to you.

  Rest assured that I will do my best to help you solve the problem.

  I would like the links and check if that helps to properly use speech recognition.

  Dictate text using speech recognition

  Common commands in speech recognition

  Set up speech recognition

  What can I do with speech recognition?

  Hope this information helps. If you have any other questions about Windows, please let us know.

  Thank you.

• Speech recognition Windows 7 they can recognize and differentiate more than one voice on a record? Thank you.

  Want to record meetings with a variety of participants

  and I wish I could have to transcribe speech recognition

  the minutes, preferably in Word 2010.  Thanks for any help

  on this page or any direction, I might take to accomplish this task.

  Hi Susan,.
  
  Welcome to the Microsoft Community and we offering the opportunity to help you.
   
  Depending on the issue, it appears that you want to install speech recognition to recognize several user profiles, but they must be put in place to recognize every voice.
   
  I suggest you refer to the link configure speech recognition for several user profiles by accessing the options of speech in advance.
   
  You can check the link to do so:
   
  http://Windows.Microsoft.com/en-us/Windows7/setting-speech-options 
   
  It will be useful.
   
  Please write us if you have any related issue of Windows.

• microphone singing Assistant - speech recognition error

  I just installed a headset on our computer to Windows 8. The headphones and the microphone work. However, when I try to put in place the speech recognition and click on 'Configuration of the microphone' I get the following error:

  "The wizard could not start. "Make sure your audio is working properly and check your audio configuration audio devices and sound themes in Control Panel.

  I am trying to get this to work for my wife who just had shoulder surgery and is unable to use his right arm.

  The entire helmet worked in Control Panel-> sound. Speech recognition program would not start. What I did uninstall all of my speakers and microphone in Windows, move before struggling back faced sheets, re-start, re - install the driver audio HP and shazaam, now it works.

  Thanks for all the suggestions and answers.