SpeedGrade: Customize panels and layout?

Similar Questions

• My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

  Low sound volume

  My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Method 2:

  I suggest to follow the link and search for the volume in the taskbar.

  (a) right click on an empty area of the taskbar and then click Properties.

  (b) in the Notification area, click Customize.

  (c) select the volume see the icons and taskbar notifications check box, and then click OK.

  I also suggest you to follow the link and check.

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

• My bookmarks sidebar appears suddenly empty, showing a search panel and no bookmarks. All bookmarks always appear in the menu bar. Ideas?

  My bookmarks sidebar appears suddenly empty, showing a search panel and no bookmarks. All bookmarks always appear in the menu bar. Ideas?

  This may be a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

• How to: open the control panel and check if Windows Update settings in Windows 8

  If you're running Windows 8 and you are not sure if you get the latest updates and patches Windows updates then the following video should help. It guides you through opening the control panel and how to check your Windows Update settings.

  Remember, make sure that Windows 8 is up-to-date on your computer, you must have the latest updates of Windows installed.

  You may also need to make sure that your computer is updated the software and drivers for your hardware or to trobleshooting purposes make sure it isn't updated drivers for your hardware. Here is a video that will show you how.

  I hope everyone finds these helpful videos. If you have any questions leave a message below. Remember, it is advisable to have the active Windows updates, however, there are certain circumstances (for example, troubleshooting) disable it temporarily is a good idea.

• Additional panel in the panels and controls in the Panel generated .h file

  I have a sign in my project, it is called LO_LVL_PNL.

  The generated header file seems to think that there are more. Here is the 'Panels and controls' section on the generated header file:

  / * Panels and controls: * /.
  #define  DITHER                           1
  
  #define  DITHER_CLOSE                     2       / * callback function: DITHER_CLOSE_CB * /.
  
  #define  DITHER_Dither_Settings           3       / * callback function: DITHER_CONTROL * /.
  #define  LO_LVL_PNL                       2
  
  #define  LO_LVL_PNL_SENDBUTTON_2          2       / * callback function: DIDsBUTTONcb * /.
  
  #define  LO_LVL_PNL_SENDBUTTON_3          3       / * callback function: EraseBUTTONcb * /.
  
  #define  LO_LVL_PNL_SENDBUTTON_4          4       / * callback function: SENDBUTTON_noe_cb * /.
  
  #define  LO_LVL_PNL_SENDBUTTON            5       / * callback function: SENDBUTTONcb * /.
  
  #define  LO_LVL_PNL_RESET_CAN             6       / * callback function: RESET_CAN_CB * /.
  
  #define  LO_LVL_PNL_UUTRESPONSE           7       / * callback function: UUT_RESPONSE * /.
  
  #define  LO_LVL_PNL_CLEARBUTTON           8       / * callback function: CLEARBUTTONcb * /.
  
  #define  LO_LVL_PNL_EXIT_BUTTON           9       / * callback function: cb_quit * /.
  
  #define  LO_LVL_PNL_Comm_Set_TEXTBOX      10
  
  #define  LO_LVL_PNL_COMMANDBUTTON         11      / * callback: CheckState * /.
  
  #define  LO_LVL_PNL_COMMANDBUTTON_2       12      / * callback function: Select_Files_DID * /.
  
  #define  LO_LVL_PNL_BINARYSWITCH          13      / * callback function: SetProgram * /.
  

  in my IUR I can find LO_LVL_PNL components, but not parts of DITHERING.

  Then, I renamed my generated header file, so it can regenerate without these additional items, but they get included when I recreate it.

  In the file of the UIR, if I double click on he Panel it opens and displays that the Panel is called LO_LVL_PNL.

  It started because I'm trying to read the value of a switch on the Panel, and in the call, I get a runtime error that follows:

  GetCtrlAttribute (LO_LVL_PNL, LO_LVL_PNL_BINARYSWITCH, ATTR_ON_VALUE, & on_off);

  NO MORTALS RUN - TIME ERROR: 'gui_handler.c', line 135, col 13, thread id 0x0000179C: library function error (return value ==-42 [0xffffffd6]). The handle is not a panel handle

  I don't know if it's two separate issues, or DITHER things cause the error; but I need help to fix both.

  The first parameter to GetCtrlAttribute() must be the handle Panel, not the ID of the Panel. The handle is returned by your LoadPanel() call.

  Do you already have a group called DITHERING? Copied from an earlier project, perhaps? Perhaps the editor of UIR has hidden or placed outside the screen. Try using the option editor find to see.

  JR

• How to separate the 'down' key panel and digital control

  Hi all

  I have a key to proecess vi events for Panel and a digital control in this Panel. the app will do:

  1. when the Panel is focused, allows the user 'up' and 'down' to the driver of some hardware.

  2. when the digital control is activated, 'up' and 'down' change its value as usual.

  somehow the other did not, because the round table 'touch down' was trigger as well when I use «to the top "'down' key aminata CNC.»

  Then, I used "Key down?" digital control to block the "up/down" key But the first time, when I run the Vi, the Panel always got triggered only once.

  any suggestions on this? test code attached to this post too.

  Thank you

  It works for me in 2014.  In short, you just need to check to see if your digital has the focus.  If it isn't, then you treat the value of the key.  No need of any other event here except the stop button.

  

• Swap sides for the scales on the front panel and containers

  Hi all

  Very simple question here. I want to Exchange on sides of the balance on my Front Panel and specifically DSC container as a pressurized tank.

  It is very easy to do with a waveform table or chart, but seems to be impossible with tanks and reservoirs.

  It would be very convenient, especially for the process of DSC where I try to imitate the flow of process on the front panel and pipes could enter tanks of different sides.

  Thank you!

  Here is a tank with the scale on the right. Just took a few minutes with the control editor.

• How to print an e-mail without printing the side panels and the folder list?

  Original title: print an e-mail

  How to print an e-mail without printing the side panels and the folder list?  It also prints a part of the message that the sides take up much space

  IF you use Outlook.com you print this way...

  1. go to your Inbox

  2. Select the desired message you want to print

  3. in the top of the message itself, you can see options like New, Delete, Junk, response, etc..
  Please select the three dots (...) next to categories

  4. click on print

  5. a preview of the message is displayed and also printing options.
  (Don't forget to click on "all pages" for multi page emails.)

  6. click on print.

  

• My system tells me that my network connection is damaged. I ran malwarebytes & it came back negative. I went to shoot to the top of my network connections in Control Panel, and it came in white.

  NETWORK CONNECTIONS

  Can anyone help? My system tells me that my network connection is damaged. I ran malwarebytes & it came back negative. I went to shoot to the top of my network connections in Control Panel, and it came in white, nothing at all, no icons, nothing.        Sincerely, Merlin

  Can you do a system restore at the time where it did not work properly? http://www.officeforlawyers.com/tips/sysrestore.html

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Why don't I have the bluetooth devices in my control panel and how do I get it?

  I am trying to install a wireless mouse. My Windows HELP tells me to click on bluetooth devices in Control Panel. I'm in the control panel and no bluetooth device it.

  I am trying to install a wireless mouse. My Windows HELP tells me to click on bluetooth devices in Control Panel. I'm in the control panel and no bluetooth device it.

  What is your make and model of computer?  If it doesn't have bluetooth hardware and drivers installed for bluetooth of the equipment - match then any bluetooth device is not going to happen.

• I do not have a Security tab, I searched my folder option control panel and don't see any file shatr etc.

  I do not have a Security tab, I searched my folder option control panel and don't see any file shatr etc.

  Hello
  1. don't you make changes to the computer until the problem occurred?
   
  I suggest you to follow the steps below and check if it helps:
   
  Method 1: To view the Security tab: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/acl_sec_tab.mspx?mfr=true
   
   
  Method 2: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/310747
   
   
  Hope this information is useful.
   

• I accidentally deleted the soundmax microsoft from my control panel and now I have no sound on my campiuter how can I get that back

  I accidentally deleted the soundmax microsoft my compiuter (Control Panel) and now I have no sound on my computer. How can I instal what agine.or how can I get my rear agine sound

  Unless microsoft recently bought "soundmax", then you need to download the

  drivers/software website soundmax.com... In addition, update the windows of reason or

  Windows update catalog does'nt have the drivers/software because soundmax

  does not digitally sign the software. In other words, that he's not microsoft WQL, thus making

  It is under the control of quality of microsoft...

• The Panel and the desktop shortcuts no longer work after the virus

  Originla title: shortcuts does not.

  The Panel and the desktop shortcuts no longer work!  I had other users on my computer and maybe a user to a virus?  I can open programs, but must do so by opening a file written by the program (for example, to open a Word file to get term; to open TaxCut to Taxcut) can anyone help?  (Uses can I have XP Home Edition.)  I tried the system recovery, but that has not fixed the problem!

  Hello

  · What is the number and the model of the computer?

  · You have security software installed on the computer?

  · What happens when you try to open the files?

  · You receive an error message or error code?

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• My automatic update does not illuminate. Even if I go into my control panel and try to turn it on from there he says always OFF.

  Even if I go into my control panel and try to turn it on from there he says always OFF. When I have a scan of my system, something back 'System broken leader' in the register of files that never deletes when I remove any spy software. Help, please.

  Hello

  Click on the following link and follow the steps in this article and check whether the problem is resolved or not.

  How to configure and use the automatic in Windows updates.

  Hope that helps.

• When I go to help and surport in my windows xp box says help and surport isn't good start Help and surport but I don't know where to go to start this i went to control panel and all programs and without his help

  ICAN can't get my windows xp help and surport to run when I go to him, he told me surport and help is not running and I have to start Help and surport where ido, I start this program tried to find in Control Panel and all proograms until I do

  Restore help and Support Service (line 235 left) - http://www.kellys-korner-xp.com/xp_tweaks.htm help repair Windows XP and Support - http://www.dougknox.com/xp/scripts_desc/fixwinxphelp.htm
  "Help and Support" link from the Menu start does not work - http://windowsxp.mvps.org/startmenuhelp.htm
  Solving problems with Help and Support Center - http://windowsxp.mvps.org/helpctr.htm
  MS - MVP - Elephant Boy computers - don't panic!