Satellite A30 - cannot set up the binding wireless modem

Similar Questions

• Satellite A300 - 12K unable to connect to the ADSL wireless modem

  My Satellite A300 - 12K suddenly cannot connect to a dsl wireless modem... There are no changes made to the parameters of
  However it connects to a modem that is not encrypted.

  Any idea what the parameters might have changed?

  Hello

  Why you n t reset the modem and check the settings?
  Configure encryption of the modem settings and encryption settings of the WLan card.
  Check if you are using the right key and change it if necessary.

  Sorry but there is no magic answer for you question, we must check everything and if necessary you must reconfigure everything!

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Satellite P300 - cannot set the password in the wizard of Toshiba utility

  I have a Toshiba P300, Windows Vista SP1 32
  I have a Manager password of my Toshiba setting of the problem in the software or utility Wizard from Toshiba.

  Hello

  Maybe you could post more details?
  What password you want to set?

  As far as I know the Toshiba Assist-> secure tab provides two passwords:
  Supervisor and user password password

  The supervisor password can be set in Toshiba Assist-> tab secure-> supervisor password utility
  The password can be set in Toshiba HWSetup-> password tab

• Satellite A30: Cannot activate WLan miniPCI card

  Have installed Intel Pro 220bg in my Satellite A30. I can't do the wireless to turn on. The switch on the side of the computer does nothing also tried fn + F8. Still nothing happens.

  Hello

  First of all it is very important to know how you installed the WLan card and if it has been installed correctly.
  I remember to connect two cables; white cable by hand and Brown to the auxiliary voltage check then Device Manager if the card has been correctly recognized. You can use the driver from the Intel Web site.

  Then everything should work properly.

• Satellite A30: how to replace the HARD drive?

  Hi guys

  can someone tell me how to get into my hard drive on my Toshiba Satellite A30, I need to renew... as one who is in all at the time does not work... even in the plans or photos of how it is all set up help of mites...

  Thank you weman4u

  Buli thanks for this great link.
  Even many themes have repeatedly discussed in the forum.
  The simple use of the search option helps to...

• After standby mode Satellite L300 cannot connect to the internet

  Hello

  I have problems with my Satellite L300, if I put the laptop to sleep it disconnects from the internet and when I try to continue later, he said that there are no wireless networks.
  The only way I can connect again is to restart my laptop. Can someone help me please?

  Thank you

  Hello!

  I have a Satellite L300 too but I can t view such a question because I often use the Hibernate and the day before.

  In any case, I think you should try to install the latest driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But before installing the new version, you must delete the old first and then reboot the laptop. After that, you can install the latest version.
  And if it doesn't work, you must update the BIOS that you can find on the Toshiba site too.

  Good bye

• Satellite A30: Can not find the COM ports when trying to query the modem

  Hello.
  I have satellite A30 and I reinstall windows xp at home, but I can't find any com port whenever I try to query the modem the display hardware confilct, but in Device Manager no sign of error/confilct, I did everything what I can.
  Add the port,
  Add more then 1 port
  disable the printer port
  change the printer port
  Reinstall derver modem,
  In short, I've done everything I can. its always show (! yellow) mark.if I add the port and if I remove the port and there is no sign of error.
  If someone help me to solve this problem a little,
  regared.
  MGK.

  Post edited by: mghouskhan

  The modem uses a virtual com port. It s not a real port.
  I wonder why it usually happens after the installation of the new operating system, you must install drivers Toshiba together in the right order
  Installing the chipset utility is important

  The modem driver should do the work and you n t need to activate com ports
  Please choose the right side of the page of the Toshiba driver modem driver after installing the OS correctly. I think that's the key

• Satellite A30 213: broken in the power supply pin

  I have so many problems with this.
  I'd rather put it in the trash than to fix it, but unfortunately I have important documents that I have not saved.

  Basically, the PIN into the Jack of the laptop is broken and I can't be able to my laptop and my battery is running out of power

  The battery is in the battery-compatible A30 - 213 in the A30 714?

  And someone has other solutions?

  Please answer as soon as possible

  Hello

  First of all a few words about the battery.
  If I m not wrong not the Satellite A30 213 uses the same battery as the A30-714.
  Therefore, you should be able to use the same battery in both units A30.

  With regard to the question on another solution.
  Well, there is only one real solution. The power supply needs to be replaced.
  I m not sure if it s only plugged or soldered on the map. However, I recommend you contact the ASP in your country for assistance.
  This should be always replaced by a mobile technician because the dismantling procedure is very delicate and difficult.

  Best regards and good luck

• Satellite A30: Cannot detect internal modem

  I have a Toshiba Satellite A30. The internal modem was working fine until a few months ago, when I moved to town. Now my computer can not detect the modem at all. Please help me!

  Hello

  What you can see in the Device Manager? Is there a yellow exclamation?

  Alternatively, you can try to install the modem on this path:
  Control Panel > modems Options and > Modems. If there is no Modem didn't try to install by clicking on the Add button. Follow the instructions in the Add Hardware Wizard.

  If you can again see Modem, check all the settings in the properties of the modem (for example the adjustment wheel) and dialing rules. Is your well configured Dial-up connection (country, area code)?

  Remove the Internet connection and make it again with the Network Setup Wizard. It is very important.

  Good bye

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• Satellite A30-203: Question about the differences of memory modules

  Satellite A30-203
  512 Ram part no PA3312U - 1 M 51
  512 of Ram Part No. PA3312U - 2M 51, can someone tell me what is the difference between these two parts of RAM apart from the retail price.

  Hello

  The PA3312U - 1 M 51: 512 MB - SO DIMM 200 - pin - DDR 333 MHz / PC2700
  The PA3312U - 2M 51: 512 MB SO-DIMM 200 pin - DDR 333 MHz / PC2700
  http://UK.insight.com/apps/Productpresentation/index.php?product_id=TOEA048EF

  Sorry, but I don't see any differences.

• Satellite A30 - shuts down during the installation of recovery or FDISK

  I have a Satellite A30 and I wanted all off it delete and start from scratch.

  Turned back with disc 1 CD product recovery, started well I was prompted to insert disk 2, it does well to about 80% then erased screen, then got the message "invalid partition table". I tried again and same thing happened. Connected FDISK back and chose option 1. 'create a DOS Partition or logic back drive' and the laptop stops. I put the startup option for no network or HARD drive CD player. At startup without inserted discs, I get the following. PXE - E61 madia tset failure, check cable.
  PXE - m0f: exit PXE ROM then freezes.

  Anyone have any ideas?

  I'm not sure at 100%, but from your description, I think that HARD drive get in trouble.
  How pxe message shows that means laptop can not find device bootable and as last it will boot from LAN.

  If possible, try to get a new HARD drive and check if the recovery procedure completes successfully. Old IDE hard drives are not more expensive. To test you can also use a used purposes, but of course has no HDD vice.

• Satellite A30: want to partion the HDD - how to do this?

  After installing a new HARD drive in my Satellite A30, I installed windows using the recovery disks, but now you want to partion the drive, how do I do this?
  Thank you very much

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4462&messageID=14518

  Good bye

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.