Splitting a clip and the audio sound

Similar Questions

• You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  tried in SOUND > Speakers > CONFIGURE it on by clicking on the right left speaker sound time and vice versa.

  Hey DiegoWO,

  There is not currently an option within the OS to achieve.
  However, your drivers audio pourrait have a built-in effect that allows you to reverse the stereo sound. If you do not see a separate application to manage your sound, you will need to visit the website of the manufacturer of your sound card and install the latest drivers.

• How to retrieve the network icons and the taskbar sound? They disappeared

  original title: extraction and network icons

  How to retrieve the network icons and the taskbar sound?  They disappear from the notification area of the taskbar.

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• How do they affect times a clip and the clip from movie of child in the same function?

  I have really two questions: how both affect a clip and the clip from movie of child in the same function? and how to get information of a component in one service for another?

  My basic setup is a clip of choice of fonts, one on each image: "bodyText_mc." Each of these frameworks has a clip of the child 'bodyText_mc.bodyText' with choice of alignment for the police. For example, the user chooses 'Script' in the first ComboBox, then selects "Align right" in the second. (This text is static, because I need more great design control I can get with dynamic text.)

  First of all, I have a combobox "cbBodyFont" that I use to go from one image to the image on movieclip 'bodyText_mc.' It works fine:

  cbBodyFont.addEventListener (Event.CHANGE, changeBodyFont);

  function changeBodyFont(e:Event):void {}

  var bodyFontFrame:String = cbBodyFont.selectedItem.data;

  bodyText_mc.gotoAndStop (bodyFontFrame);

  }

  However, if I also want to assign a child element of "bodyText_mc", like this:

  cbBodyFont.addEventListener (Event.CHANGE, changeBodyFont);

  function changeBodyFont(e:Event):void {}

  var bodyFontFrame:String = cbBodyFont.selectedItem.data;

  bodyText_mc.gotoAndStop (bodyFontFrame);

  bodyText_mc.bodyText.gotoAndStop (2);

  }

  It won't let me. Add a command to the clip of the child 'bodyText_mc.bodyText' runs to a null object reference error. I can affect the parent element or the child element, but not both. Why?

  And part 2 of my question:

  I have an another combobox "alignBodyCb" that I use to go from one image to the image in this child clip "bodyText_mc.bodyText". The user selects Center, left, or right alignment.

  alignBodyCb.addEventListener (Event.CHANGE, changeBodyAlign);

  function changeBodyAlign (e: Event): void {}

  var elementAlignBodyFrame:String = alignBodyCb.selectedItem.data;

  bodyText_mc.bodyText.gotoAndStop (elementAlignBodyFrame);

  }

  The problem is that when the user switches to a new image of "bodyText_mc" with the changeBodyFont function, always, it goes to frame 1 of the child clip "bodyText", change the font, but back to the alignment of the centre. I need the font combobox to "remember" the active data from the drop-down list alignment, can still send the clip of the child to that frame. What I want is something like this (although it obviously does not):

  cbBodyFont.addEventListener (Event.CHANGE, changeBodyFont);

  function changeBodyFont(e:Event):void {}

  var bodyFontFrame:String = cbBodyFont.selectedItem.data;

  bodyText_mc.gotoAndStop (bodyFontFrame);

  bodyText_mc.bodyText.gotoAndStop (elementAlignBodyFrame); <--(l'image sélectionnée par fonction d'autres combobox)

  }

  alias "go to the frame (do) that they just took and then send the clip of the child to the frame (alignment) they chose earlier."

  Help? If I'm going about this wrong in the first place, I am open to that, too.

  SWF file attached for Visual reference. (Not everything works yet, but the Type of body section is where I concentrate for the moment).

  Just to avoid any confusion in the timeline (not yours, Flash), I recommend alternating the movieclips bodyText of one layer to another with empty frames between those on the same layer.  Funny things can happen when you have adjacent keyframes of the things, and giving them the same name may be composed the strangeness is at stake.

  If kGlad wants to take action to tackle the rendering event thing, it's OK, but whatever it is, I don't think that it is involved in what I mean.

  All I'm saying is that when you go to a particular frame in the bodyText_mc, you must run this second line of code here and not back where you had it.  If you want to move the command for the bodyText movieclip go to a frame inside the bodyText_mc on the frame where it lands in your first line of code.

• My saved Windows Movie Maker Project open with video clips in the Audio editing panel and vice versa (NOT as it was created). Can I move them back where they belong?

  After days of the creation of a filmmaker 'project' I 'saved project' one last time, then reopen and publish a movie.  All my video Clips (phtotos) now appear in the Audio editing / music along the bottom with only a video clip standing in line of the video of this 'slide show' of 90 minutes.  Is it possible to move these clips to which they belong without having to recreate the whole project?

  What happens if you try to read the project in Movie Maker?

  Looks like your project .mswmm file is corrupt (starting
  Perhaps more than the best approach). The project can be as far
  too big and too complex to publish (save) with success as a
  video file.

  I suggest that you create several small projects
  and publish (save), each of them in the. WMV video format
  and then re-import the collection. To combine WMV files
  in a single movie.

  You can also import collection. Clips WMV to DVD
  Manufacturer and each clip, would have become a scene (chapter)
  on the DVD.

  The following article is maybe worth a visit:

  Movie Maker - how to divide a project complex smaller?
  http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm

• Need help to synchronize video clips and main audio

  I have 20 videos (symbols of the library) from about 400-800 views each. None has its own audio. I want to play in sequence on the main timeline, synchronized to an audio clip that runs along the timeline. The problem is that I can not understand how to stop the timeline to allow the clips to play uninterrupted audio.
  
  At the present time, I have clips play in sequence, I like: each clip on the timeline has a label and occupies 10 images, just so that I can read the labels. The last frame of each clip on the main timeline, I have a stop() on an Actions layer command. The last frame of each MC, I have a command that looks like _root.gotoAndPlay ("nextLabelName").
  
  The problem is the audio on the main timeline plays only for these 10 images, then stops to let each MC to play, which is exactly what I told it to do. How can I get audio from the main to continue scenario to play and keep that it synced to the sequence of MCs? Perhaps, I go about it the wrong way.

  OK, I think I've answered my own question. After some more research in some newsgroups, I found a useful code. Here's what I did, in case someone else has this problem:

  (1) kept just as it was, but removed the audio clip on the main timeline.
  (2) in the library, I went in the binding of the audio settings and he gave a C:\myaudio identifier.
  (3) created a new MC with 1 single framework, in which I inserted this code:
  SND = new Sound (this);
  snd.attachSound ("C:\myaudio");
  SND. Start();
  (4) in the main timeline, I inserted a keyframe, where I wanted the audio to start and drag the new MC to the editing table, off the stage.

  Now the clips play in sequence, the audio plays all the way through, and everything is synchronized. You would think there would be a simpler way to do it... but you would be wrong.

• HP DV2054EA bus audio and the audio driver

  Hello

  I have a compaq DV2054EA sn - pn 2CE6320SKV - RD664EA #ABU XP Service Pack 3

  I had to adapt to a new motherboard as either an overheated sizzeld and flashed blue lights out via usb on the left side

  so everything is high and works well outside the 2 things

  1 blue led quickplay lights up and the keys do not work with volume up/down

  2. I had no volume

  I now have the volume but the icon in my taskbar when shown as in mute and audio properties will not actually cut

  the sound is always available when I cut it

  so I uninstalled the audio bus and drivers conexant

  reinstalled the audio bus then restarted and get the (properly configured device code 1) then tried windows update to see if that helps anything at all the

  went to the site and downloaded another same audio bus

  When I install always the same from conexant hd audio driver

  ideas please remember that the quickplay buttons do not work, I ordered a new Ribbon to switch cover tape as mine looks rough and not slot in easily

  Thank you very much

  Maggie

  Hello

  This is a link to the UAA BUS DRIVER I found that would work on my laptop dv2054ea

  This must be installed before you install the audio driver conexant

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=96237&swItem=ob-45958-1&mode=4&IDX=0

  and here is the link for the driver Audio I installed which treats the headphones not speakers onboard inhibition

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46062-1&LC=en&cc=us&DLC=en&product=1817074&OS=228 & lang = en

  maggieglanville wrote:

  Hello

  The audio was also a very big problem to solve

  After installing the bus driver uaa audio driver kept being refused sayiing does not support

  It tooks several attempts to find the right audio driver to go with uaa bus driver

  all those on my recovery partition would not move correctly nor do any on the site of hp

  When you type in my model or even by looking at my laptop for auto detection of drivers for me

  Also, I found to my dismay that until I found the correct uaa and audio drivers headphones are not

  start-up mute the speakers on Board (this seems to be a major problem for people more)

  in any case

  the only other annoying problem that I will now consider is how my tattoo system now

  Since none of my recovery disks that I created with success are compatible with my pc/laptop

  Why, oh why your laptop allows you to produce recovery disks, then tell you they are successful

  then say you when you test them that they are not compatible

  I tried 3 different types of discs double layer min - dvd and plus-dvd

  so I guess I need to explore the tattoo

  If someone has already done this, please do not hesitate to advise

  I will now start to google

  Thank you for taking the time to read this

  Here is a link to the Hp site explaining how tattoo

  http://go2techonline.com/documents/Tattoo_DMI_Utility_Instructions_v5.PDF

  Thank you very much

  Maggie

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46062-1&LC=en&cc=us&DLC=en&product=1817074&OS=228 & lang = en

• Whenever I have add a sequence to a clip that the audio is there?

  So, I was fiddling around with adobe first and fixed most of my stuff on my own, now when I do things I don't see the video portion of the clip in the timeline, the audio only? Help pls ASAP!

  Nevermind, I figured it, when an item in the project Panel and points, this is what happens, only the music (video), but the audio is partially removed, thank you for the refresher, but I watched all the stuff of adobe.tv. I fully understand that however, most people would just get the action right away and not bother to read how the textbooks. That is the Bugbear of the today's generation (sometimes) but thank you!

• Videos like AOL, start to play, then the video blanks out and the audio continues. If I run Firefox in 'Safe' Mode, it works. Disabling plug-ins does not work

  TED talks, videos, AOL and others will start with a flash of the video, then off. The audio continues. I deleted the plugins flash and quicktime - no luck. I restarted Firefox in safe mode and it works fine. I then rebooted and disabled all the plugins - no luck. Internet Explorer works fine.
  Any ideas?

  One of the characteristics of Safe Mode is that it disables use of Firefox hardware acceleration of graphics. This method works around incompatibilities with some graphics driver software.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It takes effect after you quit and then restart Firefox.

• HP ENVY 17-j142nr laptop PC: Hi I have a HP ENVY and the audio device HD audio controller Microsoft say

  I have already installed 10 windows, and the Beats audio window does not show, I want to know, what to do to recover the audio beats?

  Hello:

  See if the IDT audio driver installation works for you...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• Satellite 1800 - DVD stutters, video playback is delayed and the audio is garbled

  Hi all!

  I hope you can help me with this problem. When I try to play a DVD on my Toshiba S1800, playback stutters, video and audio wise, which of course is irritating. I was wondering if this could be a hardware malfunctions or perhsps due to a bad driver software?

  I have tried different DVD software players, and they all have the same show. I heard it could be because that the IDE controllers were not set to DMA mode, but they are on this device. Any of you have suggestions of what causes this problem?

  Thanks in advance,
  Danny.

  What DVD do you play? An original DVD movies or a serious media.
  Have you checked the drive with the audio CD? Is it possible to play audio CDs without worries?

  I m not 100% sure, but maybe what it s only a codec problem. If the different codecs are missing audio and video issues sometimes.

• missing clip and the print in the toolbar icon

  HP deskjet F 2400 series (real F2480) running on Windows 7

  I used to have an icon in the toolbar in Internet Exploer that allowed me to print a clip of any web page, but now the icon is missing

  and I can't find it any where, have tried to uninstall printer and software and reinstall, but that did not help, Hmmm?

  Thanks Mr young, I now have the clip and reprint facilitated return, although in a different form of the original I

  had to install yet another toolbar called Bing that I didn't really, but the means justified the end thanks again

  Sonoferic42

• Why portable speaker or a headphone no sound despite all the settings and the audio devices work correctly? Please advise, thank you very much!

  Sound and audio drivers have been updated as well as volume was operated at the level of 80% and yet it was not all audio playback of stereo Laptop speakers or earphone.

  Hello

  Did you change your computer?

  If you use windows7, I suggest you to follow the steps from the links and check out.

  Audio playback convenience open

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Is there a way to change the scale of each clip and the title in the timeline?  I shot in 4 k, but I forgot to put my 1080 sequence so now I have to change each element individually and reduce by 50%.  Help!

  Is there a way to scale both the entire timeline?

  Make a clip. Make a right click on the clip, copy, select all others and paste attributes.

• I have an external hard drive and the althogh sound in 'remove hardware safely', it is not listed in 'my computer '.

  I have a HDD external and well that his "safely remove hardware" that is not listed in 'my computer' the problem is I am backing up Paolo and if I can not find I can't do.

  When I go to the hardware / device mananger it is in "O" but I can not find drive O

  Can someone please help.

  This external hard drive works on other systems?

  The drive will appear in the top of the disk management window?  If so, look at the column layout, Type, file system and status.  The "file system" must be FAT or NTFS.  From your description, it appears that Windows does not recognize the partition as being to the format in a way that he can use.  You may need to delete the existing partition (attention: this will remove all files that may exist on the disk), and then create a new partition in FAT32 or NTFS format.  Advice to do this, right-click the disk, choose 'Help', then go to:
  -> How To disk management...-> manage the volumes of base-> Delete, Create, or Format.

  HTH,
  JW