Splitting of the 2D paintings and the remending

Similar Questions

• Satellite P100-284: I noticed a split near the hinge

  Hi - I also noticed a split near the hinge on the corner of the copper colored lid of my P100-284
  Today, on careful consideration, I can see that the hairline crack appeared near the hinge on the other.
  Looks like a design fault with the supports of hinge for me.

  Hello

  I put t know if it s design fault or not, but it should be permanently replaced by the authorized Toshiba maintainer.
  Contact the tech guys in your country and explain the situation with the slot on the upper lid.

• What is - this way in Cisco IPS: WARNING: multistring - second generation of table of scene has also led to a split in the table

  I received a warning message these past by updating my IPS sensor to the latest IPS 797 signature,.

  WARNING: Multistring - second generation of table of scene has also led to a split in the table

  Someone at - it an answer for this?

  Hi Carole T

  I think that is related to the CSCua12751 bug, can you please check the version of your software and upgrade to the recommended versions.

• Percentage change customer Bill Split after the invoices are generated

  Hi all

  We have a situation where a project was created with the customer A view 100% contribution and ter customer - 0% contribution. The professional user intended to change the distribution of the invoice and customer B has 100% Contribution and client have 0% Contribution. However, this is not respected, and bills have been raised and revenue recognized for this project. It was discovered while the percentage of distribution of Bill was not correct. Now, the split of the Bill cannot be changed from the application (front-end server) - the field is not update-able and also client B can be seen on the screen.

  Professional users have mentioned that they are capable of-

  1. disable extensions of billing

  2. Enter the negative events to put receipts and invoice at zero

  3 run the recipes and process as requires it invoice

  The amount of customer Bill Split on the project must now be changed. How can this be changed?

  Percentage of customer Bill Split (contribution) can be changed by a script of the database update or is there an API for it?

  Concerning

  Vivek

  Hi all

  I discovered later that this is not possible when the project entered and transactional (revenue generated or invoice is created).

  See document for more details

  How to change the customer or the percentage Contribution of customer sharing on a project with spending or invoices (Doc ID 149127.1)

• ORA-14080: partition cannot be split along the specified high limit

  Hi guys,.
  
  I try to divide a new partition MD_PROV_201207, but hit error ORA-14080: partition cannot be split along the specified upper limit.
  My code as below, please help make sure my code is there any problem. Thank you.
  
  ALTER TABLE SPLIT PARTITION abc_201206 table_owner.abc
  AT (TO_DATE ('20120801', 'SYYYYMMDD'))
  INTO (PARTITION tbsp_abc, PARTITION abc_201207 TABLESPACE tbsp_abc TABLESPACE abc_201206);
  
  
  HIGH_VALUE PARTITION_POSITION NOM_PARTITION
  --------------- ------------------------------ --------------- ------------------------- ------------------ ------------------------------
  abc_201203 '20120401' 1
  abc_201204 '20120501' 2
  abc_201205 '20120601' 3
  abc_201206 '20120701' 4
  MAXVALUE DEF 5

  SagiGal wrote:
  Error again.

  ALTER TABLE SPLIT PARTITION DEF table_owner.abc
  AT (TO_DATE ('20120801', 'SYYYYMMDD'))
  IN (PARTITION, PARTITION DEF abc_201207)
  ;

  ERROR on line 1:
  ORA-14080: partition cannot be split along the specified high limit

  Is the partition that I shared is incorrect?

  Seems that you have high bound
  Action: make sure the limit along which a partition is to be shared together
  lower than that of the partition to be sliced and higher than that of a
  partition immediately preceding the one to be split

  See also Metalink
  ORA-14080 during an attempt to split a Partition. [100299.1 ID]

  Osama...

• Which camera to photograph the paintings and then print postcards and greeting cards?

  I currently have a PowerShot SD600, but maybe I need a new camera for my purpose.  Those who would work for my application?

  I paint with acrylics and the pintings out for between 1 ' x 2 ' and 4 ' x 4 '.  I want to take pictures of them in order to have a professional printer to create postcards and greeting cards to sell in museums.  The printer indicates that it will use a 1200 dpi printer.  I really want the absolute best cards and the image that I can get.

  Should what resolution I take photos, how can I be sure that I take photos in the correct resolution (or is it adjustable after the fact), and that carmeras would work for this?  I have Adobe PhotoShop if it has no effect.

  I would like to use the camera for this purpose for about 6 images per year.

  I also sell houses and could use the camera for pictures of the housing list.

  With regard to the price I'm willing to spend up to $600, if necessary.

  Thank you.

  If I were to try to do this on a budget...

  The camera LENS is more important that the body... then I would seek to lenses.  For this type of work, a macro lens will work better because they detail more high resolution capacity (even when you are not using them for close-up photography).

  The camera BODY is less important.  Your work is not in motion when she is photographed (it is not the sports photography or action) and this means that the features that are ideal for sports are not important for what you want to do.  You don't have to worry about performance in ISO or noise because you get control lighting (and you need control lighting.)

  An image will be generally well look at 300 dpi or more (even a little less than 300 dpi will look still good enough).  It will not look as good in 150dpi and some laboratories refuses to print anything less than 100 dpi (even if you insist) because they believe you hate and requests a refund (even if you insisted that they print it at such a low DPI).

  If your postcards are a size 4 x 6 "then a 18 megapixel print to 864 dpi (which would look fantastic).   Even a 5 x 7 would look great.  A size of 8 x 10 "would receive up to 432 dpi (which is always very well).

  If it's only 6 photos per year and you would shoot them the same day AND you don't think you would use the camera gear for anything else THEN... either (1) strongly consider hiring a person for the job, or (2) consider RENTING the equipment if you can't find anyone to do it (just be warned that it will be tricky).   You can rent equipment from places like LensRentals.com or BorrowLenses.com (and probably others I don't know about.)

  Camera

  Being budget minded, I would shoot it with a Canon T5 (18 megapixels - about $400 although if you get a refurbished unit you can get it for less).  "Renovated" is about $200, but I see the store gun shows them as not in stock right now.  You can also use a Canon SL1 (very slightly more expensive than a T5 but if you get a renovated body is $279)

  Goal

  A Macro USM Canon EF-S 60mm f/2.8 lens.  It's the power of resolution in detail above in point lowest price available in the line-up.  All other macro lenses are more expensive.  It is $ 419 at most merchants of Canon, but I see you can get a refurbished copy directly from the Canon store at $319 (and it's in stock):

  http://shop.USA.Canon.com/shop/en/catalog/EF-s-60mm-f-28-macro-USM-refurbished

  Tripod

  You will also need a tripod.  For light work as a T5 and a 60 mm macro lens, a tripod Manfrotto 190 series would be ideal, but Manfrotto is a reputable tripods, so they will not be the thing cheaper than you can find (but they are quality).  You will be able to find budget from companies like Slik tripods (not nearly as Manfrotto but it will be cheap.)  I'm not advocating normally buy tripods 'cheap' because they break a lot and now that you buy a tripod to replace the broken tripod you bought to replace the tripod broke before this one... and at the point where to add it you could have come by purchasing the quality tripod from the start.  Most of photo equipment is sustainable and does not need to receive the "white glove" treatment during the manipulation it - they can take a bit of a transition to tobacco and are proud to show their scars from the battle.  But if you buy a tripod at low prices... they do not so good shots... Be gentle.

  Cable tie

  I would also get a long camera USB modem cable (the cable that comes with the habit of the camera is particularly long) and allows you to set up a laptop computer connected to your camera so that while your camera is pointing to your paint, you can set the lights while watching your computer screen.  Search Amazon for "Attached USB Cable" and you'll see a lot of cables 15' that work.  It must be 'USB type A mâle' at one end of the cable (it is the most common USB plug) and ' Male USB Mini-B ' on the other end.  You'll notice brand cable 'Home tools' (about $37) and you'll probably also see the brand "Monoprice" (about $7).  Guess who I bought?  Yes indeed that cable $7 works just as well as the cable $ 37 (it's simply not painted "hunter orange").

  A Safety Board: attach a camera, it is possible that someone (you, perhaps) could tripod on the cable modem service, shoot it is hard and damage to the USB port on the side of the camera.  .... I use some Ribbon adhesive (adhesive tape is similar by the dint of... duct tape but duct tape leaves a VERY messy residue when you take it off and the tape adhesive comes off clean and does not leave a sticky, sticky mess, icky.)   Plug one end of the cable to the camera, give yourself at least a foot or two of slack and the cable on the tripod of bands so that if someone goes off on this issue, he's going to shoot the tripod instead of the device.

  Lighting

  Normally, it takes thinking of everything that has any amount of "shine" to it as if you are shooting in mirror.  If flash would be visible to you while looking into this mirror, then it has reflection will appear in your picture.  For this reason lighting is normally left to the sides (and I said 'Coast' (in the plural) because you will need more than one.)  If the flash is disabled on ONE side, while coast will get a stronger than the other side light and will cause lit image.  You'll therefore need to balance the lighting have lights on both sides.

  These fires are not necessarily photographic flashes (who would get expensive), but you probably don't want to use the daylight balanced lights.

  Bob has already pointed out the tricky part... most of the paintings are flat on the surface (oils, watercolours) so as long as the light is off on the side, you will see no reflections.  But acrylic have texture and you think that this 'texture' (since dired painting is brilliant) is little micro-miroirs to all sorts of crazy angles.

  I have never tried acrylic of photography, but my father was a painter and I'm familiar with the behavior of the paint and can well imagine the problems this will create trying to photograph.

  Circular polarizing filter

  If the light source from an angle (closed on the sides), then usually a polarizing filter can reduce this light reflections.  The EF-S 60mm f/2.8 Macro lens has a diameter of 52 mm front filter threads.  This means that you may need to purchase a "Circular Polarizer" filter in diameter size 52mm to deal with Reflection.

  You can find inexpensive circular polarizers, but these are sometimes of very poor quality and create alterations in wobbly color.  Large filters thread names are B + W the Hoya "PRO1" brand series filters (budget fact Hoya filters too - line PRO1 which are good filters Hoya).

  Rental

  BTW... If you want to go nuts with the resolution of the camera and you plan to RENT equipment rather than buy it... my camera recommendation would be to move to a Canon 5 d and a Canon EF 100 mm f/2.8 L IS USM Macro lens.  The 5 d is a 50 megapixel sensor resolution 8688 x 5792 pixels.  A 4 x 6 "print 1448 dpi format (well over 1200 dpi of resolution of your printer).  Format 5 x 7 ", it is still 1241 dpi.  A 5 d is not cheap (it's a $3,600 for the body 'only' camera).  So, I would not buy one to shoot 6 images per year... but I sure would rent one for work.

• I missed the SHIFT key and press several keys in the lower corner of my keyboard LH. Firefox split up into several iterations, and I had to reboot.

  I missed the SHIFT key and press several buttons in the lower left corner of my keyboard. Firefox has lost the tab that I was using and divided into a separate iteration for each other (plus two I had closed). I could not recover and had to close all but one of them and restore all my tabs.

  What I had done and how I should have recovered?

  First, you need to update to Firefox 18.0.1 Firefox updated to the latest version. The version you are on is bug and little course.

  Second, it looks like you may have entered groups of tabs. Use tab groups to organize a large number of tabs is that look familiar?

• How to split string separated by commas and pass to the clause of the select statement

  Referring to article How to divide string separated by commas, then pass to clause of a select statement, tquery that there the following plan:

  Query1:

  select * from emp where ename in (
      select regexp_substr('SMITH,ALLEN,WARD,JONES','[^,]+', 1, level) from dual
      connect by regexp_substr('SMITH,ALLEN,WARD,JONES', '[^,]+', 1, level) is not null );
  

  Base1:

  Plan hash value: 4242290184
  
  
  --------------------------------------------------------------------------------------------
  | Id  | Operation                       | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT                |          |     1 |   133 |     7  (29)| 00:00:01 |
  |*  1 |  HASH JOIN                      |          |     1 |   133 |     7  (29)| 00:00:01 |
  |   2 |   VIEW                          | VW_NSO_1 |     1 |    46 |     3  (34)| 00:00:01 |
  |   3 |    HASH UNIQUE                  |          |     1 |       |     3  (34)| 00:00:01 |
  |*  4 |     CONNECT BY WITHOUT FILTERING|          |       |       |            |          |
  |   5 |      FAST DUAL                  |          |     1 |       |     2   (0)| 00:00:01 |
  |   6 |   TABLE ACCESS FULL             | EMP      |    14 |  1218 |     3   (0)| 00:00:01 |
  --------------------------------------------------------------------------------------------
  
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  
     1 - access("ENAME"="$nso_col_1")
     4 - filter( REGEXP_SUBSTR ('SMITH,ALLEN,WARD,JONES','[^,]+',1,LEVEL) IS NOT NULL)
  

  However, the following query generates the plan I want:

  Query2:

  select * from emp where ename in ('SMITH','ALLEN','WARD','JONES');
  

  Plan2:

  Plan hash value: 3956160932
  
  
  --------------------------------------------------------------------------
  | Id  | Operation         | Name | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |      |     4 |   348 |     3   (0)| 00:00:01 |
  |*  1 |  TABLE ACCESS FULL| EMP  |     4 |   348 |     3   (0)| 00:00:01 |
  --------------------------------------------------------------------------
  
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  
     1 - filter("ENAME"='ALLEN' OR "ENAME"='JONES' OR "ENAME"='SMITH' OR
                "ENAME"='WARD')
  

  Can I change the query1 query for plan2?

  As Juliet was mentioned in the first SQL that you generate from the ENAME list that you must pass in the IN clause when executing. But in the second SQL, it passed as a static value. So first SQL must do more work. So you see a different execution plan.

  But this is a work around to get what you are looking for. But I can't say it's a foolproof method. But anyway here you go.

  SQL > var ename_list varchar2 (100)
  SQL > exec: ename_list: = 'SMITH, ALLEN, WARD, JONES ';

  PL/SQL procedure successfully completed.

  SQL > select *.
  2 of PEM
  where the 3 «,» | : ename_list | ',' like '%', | Ename | ',%';

  EMPNO, ENAME, JOB HIREDATE DEPTNO ID COM SAL MGR
  ---------- ------ --------- ---------- --------- ---------- ---------- ---------- ----------
  7369 SMITH COMMITTED 7902 2975 2 APRIL 81 0 20
  7499 ALLEN 7698 1600 20 FEBRUARY SALESMAN 81 300 30
  7521 WARD 7698 1250 22 FEBRUARY SALESMAN 81 500 30
  7566 JONES MANAGER 7839 2975 2 APRIL 81 0 20

  SQL > select * from table (dbms_xplan.display_cursor);

  PLAN_TABLE_OUTPUT
  -------------------------------------------------------------------------------------------------------
  SQL_ID, 848zhvbvgf7d6, number of children 0
  -------------------------------------
  Select * from emp where «,» | : ename_list | ',' like '%', | Ename
  || ',%'

  Hash value of plan: 2872589290

  --------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  --------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |      |       |       |     2 (100) |          |
  |*  1 |  TABLE ACCESS FULL | EMP |     1.    38.     2 (0) | 00:00:01 |
  --------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------

  1 - filter(','||:ENAME_LIST||',' LIKE '%,'||") ENAME "|", %')

  19 selected lines.

  SQL >

• Splitting of the objects in a schema 2 storage spaces

  Hi is possible in the Oracle database to split a schema objects in tablespaces 2 (or more)?
  
  
  I am trying to export and then import a schema to another machine, but get a: there is no error APEX_XXXXXX tablespace. About 4 tables and respective constraints threw this error while everything else was imported successfully.
  
  I have granted unlimited on tablespace quota when I created the user.
  
  I have not "think it was possible but can't see why it will search this APEX_xxxx tablespace for specific tables. Export of gave no error btw.
  
  
  With the help of Oracle Database 11 G R2.

  William Wallace says:
  I don't know why some of these paintings ended up in the table space in which I intend to put the rest of the schema objects. But could I still do the REMAP_SCHEMA?

  Thank you for your help.

  Edited by: William Wallace on November 3, 2012 05:06

  Probably because the default tablespace for the account has changed in the past, or CREATE TABLE explicitly specified the name of a tablespace.

  I would try to perform an export of user level, then an import of user level using the REMAP_TABLESPACE clause. This requires the use of expdp and impdp, exp not classic and imp

  HTH
  Srini

• How to eliminate the split after the restoration of browser screen?

  FF 29.0.1 running on OS x 10.8. From time to time, from FF (after killing him) and the restoration of all sessions, results in each window with tabs displayed in a split screen. The upper part is about 4 "high, followed by a seam, then the site itself. Resizing can completely eliminate the useful portion--unable to shrink beyond the joint.

  Open a new tab results in a screen divided; Open a new window appears normally.

  The problem occurs only after the restoration of the tabs - never when FF is normally closed.

  Suggestions?
  Thank you.

  Hi nxtr, your test Mode without fail gives strongly suggests that one of your extensions is to create the gap.

  If you have not checked recently updates to the extension, you can do it from the page modules. Either:

  • Command + shift + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, above the list, click on the "gear" button Check for Updates.

  If they are already up-to-date, you can try to disable selectively non essential. I hope that the problem is caused by one of.

• See the PDF document in a new window "Split" of the iPad?

  I want to be able to draw on my drawing application (http://bit.ly/joc0zm), but also have iPad split view opened with one of my pdf books 'how to draw' on the side. I can open the app and view the 'Photos' pictures I have synced to it, but I want to be able to view the manuals in full pdf format.

  Not all applications are supported in split mode.

  If you have dedicated PDF reader apps, try them. Alternatively, you can try to import (opening) the PDF in iBooks and try this. I know that iNooks working in split view, but I have not tested with PDF files.

• Splitting of the artists

  My artists seem to be split in iTunes 12. I've never had this problem before the current version (although I had other problems with split albums, and fixed those ensuring all tracks are disabled for the compilation). Background: I have my updated files to consolidate in a field (default iTunes folder)

  The problem arises that there is more than one entry for an artist (sometimes divided by song, sometimes divided by album). I tried delete metadata from the artist for each song/album and then all selected and changed them all to a single name. Does not work. Then I tried to add the same name of the album artist, and that does not work either. Then I erased the artist data and data artist album on the left. Does not work. I checked the sort tab to ensure that the files are not sort differently. It's frustrating because for an artist, I'm having several entries, some have a few albums, then the other entrance (same artist, same spelling) will be one or two other albums. I don't know what else I can try.

  Also, this only seems to be a problem on my library on my computer. When adding to my phone, artists (and their albums) split.

  Help, please?

  

  All the usual suggestions. Check the settings as an artist album, kind of tags.

• AC adapter / CC has a slight split on the new Toshiba unit

  Hello

  I just got my new Toshiba today. However, I just noticed that on the adapter sector (the end that connects to the laptop) has a slight split inside. This exposes the wires inside.

  What would be the best thing to do at this point?

  Thanks in advance.

  Hello

  Well, I think that the easiest way is to visit your retailer where you bought the laptop and explain to him the situation. Maybe you will immediately get a new. The other possibility is to contact Toshiba service partner in your country and to order the new adapter. If the warranty is valid, you should get this free game.

• Cover of split near the hinges on Satellite P100

  Cover orange on my Satellite P100 guard split by hinges, even if I now have to take great care to open and close the lid. Toshiba have replaced under warranty.

  I think the hinge friction is too strong for the coverage. Someone at - it a similar problem and if yes what can we do?

  It seems unnecessary to keep just replace the cover every time.

  Post edited by: ADMIN

  One of my friends sent the laptop to replace the top cover and everything was done for free! The warranty covered replacing.
  Technicians of the ASP has changed the defective part and said that the new top cover has been used seems they have changed something on the cover of proximity to the hinges, because so far everything is ok

  Happy new year :)

• Re: Split on the upper eyelid on Satellite P100

  I've had my laptop now for about 2 years. In the first year, a split appeared near the hinge and the cover has been replaced under warranty.
  Now almost a year later the same thing happened again and the laptop is out of warranty.

  If someone else has had a similar problem and where can I get a permanent problem solution so that it do not replace again.

  Hi Michael

  Unfortunately, you need to replace the lid cracked again.
  Something similar happened to one of my friends, and since the second replacement everything is ok now.
  It seems that the ASP has replaced the upper eyelid with the new design.

  Good luck