AC adapter / CC has a slight split on the new Toshiba unit

Similar Questions

• my1402 has a slight flashingred with the letter E, but nothingwill impression

  my1402 has a slight flashingred with the letter E, but nothing will not print I was told to go to addremove programs and uninstall, but my printer is not on the list of programs

  Hi gjayand welcome to the Forums of HP.

  I see that you are having problems printing.  I would try to help.

  I recommend you to perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest you then following the steps in this document on lights blinking.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Drive on which Windows XP to reside is always labeled as a system drive. How can I make one of the other disks that has Vista or 7 that the new system?

  Change the system drive

  I'll try to explain my situation better than I can.

  My situation is that when I used to have XP installed, I had installed the only drive I had back then which is now the drive D, for a long time, so I have Windows Vista Home Premium 32-bit, Windows 7 Home Premium 32 bit installed on two different discs, Vista is installed on drive C and 7 is installed on drive E , but I don't have XP that I had managed to get rid of it.

  My problem is that the drive on which Windows XP to reside has always left this disc marked as system in the disk management window, and I was wondering how to do that one of the other readers who has Vista or 7 that the new system?

  I already managed to change the startup disk from drive where Vista is installed to, it's just that I need to change the disk that is marked as system to another drive, such as D drive begins to show signs that it comes at the end of his life and I would like to move the startup folder as well as the other files needed to start on the other.

  I assume that you installed Windows XP 1, then Vista, 7 (these 2 OS not in order)?

  And Vista and 7 was by all means upgrade installation?

  Since originally, that you have installed Windows XP on drive D, it should be marked as 'system' and retains so the tag 'system '.

  The volume of the 'system' should be identified as the first primary partition active. It may or may not have the files it contains.

  The fact that the system considers "system drive" does not mean that there are files that it contains.

  Now, you want to delete the existing volume and create a new volume. Needs to be done outside the facility.
  When you start the cd or DVD to start the installation list us readers, if you remove the volume the volume drive letter is already booked, so you get the next available drive letter, do not re-use the deleted volume drive letter.

  If he removed during installation and then recreated as a new volume (formatting does not remove the volume, you need to delete the volume and recreate it)

  -[Posted by Darrell Gorter [MSFT] in another forum.]

  Try to format the XP partition and change the drive letter.

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• video loop, the value, but has a slight pause at the end

  Hello
  
  I have a video in a loop via AS3; the only thing is that the video stops a little at the end before a loop is executed.
  Someone knows how can I fix?
  
  I tried the following, but any method, I get this break:
  
  (METHOD 1)
  container.myVideo.autoRewind = true;
  container.myVideo.addEventListener (VideoEvent.AUTO_REWOUND, loopVideo);
  
  function loopVideo(event:VideoEvent):void
  {
  container.myVideo.play ();
  }
  
  (METHOD 2)
  container.myVideo.addEventListener (VideoEvent.COMPLETE, playAgain);
  
  function playAgain(evt:VideoEvent):void
  {
  container.myVideo.seek (0);
  container.myVideo.play ();
  }
  
  Kind regards
  
  Boxing boom

  Hi all

  Just this sorted out by an old post of 'WebPiper ';

  The answer is:
  container.myVideo.addEventListener (VideoEvent.COMPLETE, playAgain);

  function playAgain(evt:VideoEvent):void
  {
  / * container.myVideo.seek (0); * / This is not necessary ;)
  container.myVideo.play ();
  }

  My video loops perfectly now.

  Kind regards

  Boxing boom

• Windows 7 has not installed windows with the new installation games

  Hi all

  I just installed a fresh copy of Windows 7 Pro, but I noticed that no games have been installed with it (Solitare, Minesweeper, etc.). What is happening with this? Are no games included with the Pro version or have not installed? How can I get back them?

  Thank you!

  Hello.

  By default the Professional SKU does not install any games.

  You can install them yourself by clicking on start-> Control Panel-> programs-> Windows features turn on or off. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Outlook Express has recently started contracting letters - the new letters under previous and now can not see when new se

  used to get the letters and new was up (configured to view by date of receipt) and recently the letters are put in chains, under the previous letters by the same consignor - and do not see the new because are the low way somewhere on the list. How can I go back to the old way? Thank you

  View | Current view. Check: All Messages from show and uncheck: Group the Messages by Conversation.
   
  
   
   

• iPhone 6s, noticed slight curvature at the top of the phone?

  HI all, I took my (not even) a month new iPhone 6s my pocket the other day and noticed he has a slight bend at the top of the phone! the phone still works perfectly well and all, but be picky with everything and the fact that I paid over $ 1000 for it, you'd think that that expensive phone would not bend at all? Since Ive had the new phone from the Telstra shop, I had a thick screen on it also protector a good protective case. its never been deleted before, doesn't have a mark on it visually! I don't know if it was from these two hot days, we had that could have caused it but yes, I wonder if Apple can fix the phone or replace it under warranty? If I did not notice that he had a slight curvature, it wouldn't worry me... Oh now that I noticed, angry that she has a slight curvature at every time lol

  Take it to an Apple Store or Service Center authorized Apple and let them look at and advise you about next steps.

• APEX 5, fixes 503 group has been installed, however still the info "Patch Set 5.0.2.00.07 is available".

  Hello

  Win7 64 teacher, Oracle 11.2.0.4.0
  Although the last group of patches 503 has been installed, there is the news that 'Patch Set 5.0.2.00.07 is available'.

  Please see screenshot. No other problems with the 503 until now.

  

  What could be wrong here?

  Thanks and greetings

  André

  Hi Andre,

  This should be fixed now, and you should see "Update system".

  Concerning

  Patrick

• Flags of HP touchsmart 23 all in a desktop monitor has a slight tint of red on the left

  I have a HP Pavillion 23 touchsmart all-in-one desktop pc running windows 8.1. My touch screen started showing a slight red tinge on the left side of the screen. The rest of the screen normally shows. I have no idea what may be causing it. I tried to adjust the resolution and colors. I have also checked the power connection and update the video drivers. I am at a loss for what is the cause.

  Hello @Bree0037,

  I understand that your HP Pavilion TouchSmart 23 all-in-One desktop PC has a red tint on the left side of it and looking for assistance. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• is - it safe to replace the old adapter 65W, 18.5V 3. 5 with the new adapter 65W, 19.5V, and 3.33 has...?

  Can I replace my

  old adapter 65W, 18.5V, 3. 5 has with

  new adapter 65W, 19.5V, 3.33 A

  for my Presario V6000 laptop

  Serial number HP: V6316TU

  p/n: GJ135PA #ACJ

  S/n: CNF7222J78.

  Is it safe to use the new adapter with + 1V and difference Amp?

  Bhavesh3e wrote:

  Can I replace my

  old adapter 65W, 18.5V, 3. 5 has with

  new adapter 65W, 19.5V, 3.33 A

  for my Presario V6000 laptop

  Serial number HP: V6316TU

  p/n: GJ135PA #ACJ

  S/n: CNF7222J78.

  Is it safe to use the new adapter with + 1V and difference Amp?

  Hello

  I read a few articles about it and it will work. However, you need to keep an eye on overheating. When it's too hot, I'd rather swich back to the old adapter or a replacement with the same characteristics. EBay is full of them, and some of them are even of real Chargers HP.

• I can't start my pc. Error: Microsoft Mobile Pc presentation adaptability Client has stopped working

  I can't start my pc in Normal Mode, it has a pop up notice (Microsoft Mobile Pc presentation adaptability Client has stopped working), but it starts in Mode without failure. How to find and install this software. PLEASE HELP ME!

  Hi, Tan,

  Try the suggestions of the links given and check if they help:
  http://answers.Microsoft.com/

  http://www.ehow.com/how _

• What is - this way in Cisco IPS: WARNING: multistring - second generation of table of scene has also led to a split in the table

  I received a warning message these past by updating my IPS sensor to the latest IPS 797 signature,.

  WARNING: Multistring - second generation of table of scene has also led to a split in the table

  Someone at - it an answer for this?

  Hi Carole T

  I think that is related to the CSCua12751 bug, can you please check the version of your software and upgrade to the recommended versions.