Spotlight, apparent and reverse

Similar Questions

• Windows movie maker avi diplays. othe vido files and upside down and reverse

  Windows movie maker avi diplays. and other video files backwards and reversed, but they normally appear with other video players.

  Hello 1semaj1,

  This thread has been created in the TV forum and the movies for windows; the Microsoft moderation team has moved this thread for photos and video forums.

• What is the difference between Unicast RPF and Reverse Path Forwarding?

  I am confused between Unicast RPF and Reverse Path Forwarding function.

  What is the difference between Unicast RPF and Reverse Path Forwarding?

  Because they have all two please check the address of the source of each package before sending it to the destination too?

  Reverse Path Forwarding is used only when the network want to build a tree shared multicast communication and then we must use Unicast RPF after creation of the shared tree?

  The mechanism of the RPF is mainly used to ensure no loop of routing traffic.

  As you probably already read, it does by ensuring that his route to the source address of a packet received is accessible via the same interface that the packet is entered in the. Think of the notion of "root port" in STP. all root ports are similar to the root, sunflower follow the Sun. Therefore, it is naturally a loop prevention mechanism.

  With multicast traffic, it is quite likely to create multiple loops of routing the nature of 'destination' traffic. For this reason, using a mechanism as the RPF to ensure you are on the "road to the root" (to say) to the source originating multicast traffic. Otherwise if you're not then you either receive this traffic route in a loop, or a suboptimal path.

  uRPF works essentially the same way, except that it is done for unicast traffic instead. Now with unicast traffic your flow is from a source and directs to a single destination. Given that, as the fact that you are using a dynamic routing algorithm (which allows to select the path to a destination), you can have loops of your network for unicast traffic flow routing; of course there may be exceptions to pitfalls of configuration route redistribution.

  However RPF when it is applied to traffic unicast can add another advantage, and it's verification IP source. That's why we can use it as a security mechanism to ensure that data are from where it is supposed to come.

  On the limit of the L2, you then have mechanisms such as guard source IP to ensure that the correct host is not usurpation of their IP address.

  By analogy RPF can be used for checking at source for multicast traffic, and it is intrinsically that however, the most important role is so that it can be used to guarantee without loop routing of multicast traffic.

  I hope that helped clear things upwards and not confused you any more with all this.

• Can I use a USB pedals to control Play, Pause and reverse in first Pro CC?

  What I can or ever be able to use a USB pedals to control Play, Pause and reverse in first Pro CC?

  This would specifically for the production of subtitles.

  Play... listen... pause... translate... repeat, repeat, repeat etc...

  First looks almost as good as MacCaption if it had the ability to use a pedal USB instead of the JKL keys it could make it much more user-friendly for our Transcriber of closed caption.

  It must use the keyboard to type or transcript and must switch from windows by clicking on the window, she needs to handle.

  IF she could continue to type and use only the pedal to play, pause, reverse the playback head and still be able to keep typing in its captions window that would greatly simplify the process.

  Can present you this as a feature request?

  Thank you.

  rburleson wrote:

  Can present you this as a feature request?

  You can do so here:

  Feature request/Bug Report Form

• can not make or produce the clip modified with dark tones / highlights and reverse

  I can not make or produce a clip that has been modified with the shadows / highlights (smoothing time, black, white clip) and reverse with speed / duration.  When you try to make I get an error.  No number it says only: order and error.  If I try to produce the video, it starts to run and then I heard a sound that resembles a goat and the program stops.

  Clamp reversed, nest, and then add the effect or v.v.

  See if this will help.

• Combo line bar and reverse line bar combo

  Dear all,
  My requirement is line combo histogram must be displayed above the page and reverse line combo histogram to display under page.
  How set the reverse line bar graph could you pls send me the details step by step.
  
  for example
  
  
  
  Thank you

  Hello

  How set the reverse line bar graph could you pls send me the details step by step.

  What do you mean by inverse?

  You mean in Figure 1
  Measure1 online
  Date2 as bar
  and to figure 2
  In the bar Measure1
  Date2 as line

  If yes add two graphical views to view compoundlayout and select measures accordingly in both charts.

  Kind regards
  Srikanth

• Spotlight privacy and strength of transmission usb eject

  I use an external usb drive, as my Time Machine drive. almost every time that I try to eject it, I get a message that it cannot be ejected and I should use the ejection Force. In the past, I was able to avoid this by turning off Spotlight indexing drive. However, when I try to add this drive (or other) for the Spotlight privacy settings, I get an error message and I cannot add anything. What happens in the privacy of Spotlight? Why can't I eject this drive? I use two other USB external drives on a regular basis and do not have this problem with either. Is - this specific Time machine?

  You have some sort of problem with the drive. I would try using first aid in disk utility to solve this problem, if it is repairable.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select the withdrawal of external volume of the Scripture list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

• Pxi different 2-5421 or-tclk synchronization help and reversing a signal

  I have 2 PXI-5421 function generators. Screened through my vi I load a .hws file and output the same signal makers 2 all in phase and triggering the same point. I need basically to do, it is reverse one signal of 180 degrees and keep them always trigger the same starting point.

  im not sure how is invert the signal on a 5421 or how to separate code so that each signal generator is separated.

  Hi Liam,

  I did a quick search on your issue and I think it is interesting to try to 'configure exit Mode.vi niFgen' (red border on the screenshot) and the value

  output mode of entry to the "arbitrary signals" (right click on the parameter "Output Mode"-> create constant-> select 'arbitrary signals' in the drop-down list).

  

  You could include a code of the error you found in your next reply. Thank you!

  All the best,

• Audio reading of LABVIEW (with break and reverse)

  Im trying to build a VI that will play a pre-recorded sound, with the ability to pause, play backwards and go to any part of the audio data and continue playback. (Play in reverse would be a nice feature, but does not really need to be there). Once I understood the procedure, he will fit in with reading video and recorded the data display, so it must be fairly dynamic in the measurement of time of the loop, when added to the output buffer.

  I have what I thought should work (written in LABVIEW 8.6) only I find that the 'writing of audio output' vi is not as expected. My interpretation of the documentation for this vi is that when you enter data in this vi (with zero time-out wired in), he should dump these data in the output buffer and then return to the main program, then these data are playing. However, I find that this does not happen and that the vi takes at least that long to finish than it takes to read data. The rest of the vi is completed in less than a millisecond, then this is definitely the vi that takes all the time. It is causing the sound to be very clicky and sometimes don't even look like a sound vibration.

  I'm using the wrong screws? is there a better way to go to achieve this goal? The VI I wrote is attached. If the sinusoidal signal is set at 500 Hz, it sounds like the sampling frequency is a multiple of this not exactly why it works (Im). If I have the sinusoidal signal set to 501 or 510Hz for example, you hear the problem I described above.

  Just a suggestion.,.

  You could try the windows media player activeX control.  Just load the file you want to play using the nodes property of the activeX control and it does the job remaining.

  I am juice tests the vi you attached and will post back if I have ideas.

• My copy of windows is not genuine, apparently, and my product key contains an invalid character

  I use this computer for over a year with no problems, but when I started it today, my product key was apparently not valid. It contains either one I have either a 1, neither of which is a valid character. Is that what I can do about it?

  If you encounter problems reading your product key on the label, try a flashlight and a magnifying glass.

  My understanding is...

  Of the 36 Latin and Arabic, used numbers in most of Western Europe
  languages, 24 seem to be used for current product codes and 12 are not.

  The 24 used are:
  2346789BCDFGHJKMPQRTVWXY

  The unused 12 are:
  015AEILNOSUZ

  According to police and the used letter cases, this reduced set is usually
  without ambiguity, but knowing that the members it certainly may be useful.
  Microsoft usually uses uppercase for printing / display of the distribution, and
  It doesn't look like they have been specially selected to minimize the chances of
  confusion and also, I believe, to avoid accidentally generating
  offensive - looking sequences of characters. The model is easier if you look
  the characters not used like this:

  AEIOU 015 LNSZ

• Sending pictures to email - not set in order - and reverse before getting them

  I selected a series of photos in a folder in the picture library - 1st pic-clicked and clicked on the last offset.

  Photos were numbered from SAM_005 to SAM_016 and when sent to the Email SAM_016 has been attached 1 SAM_005, 006, etc - so out of sequence in my captions in my text of the e-mail.

  Even worse, when I sent the email in my sent folder, the entire list of attachments reversed in the slideshow - so my captions in my emial text were back to the slide show.

  I missed you to use send to mail recipient of the message.  You can manually create a message, then add them in reverse order.    Hotmail issues apply here: www.windowslivehelp.com
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  Have wrong answer Steve, you tried?

  Make them individually creates a separate for each - e-mail defeats the purpose to send quickly a group of images.

  It is an obvious BUG in send it to / recipient of Email from programming and should be fixed - please report it if you have a sweater.

  Also, as I noted in my original post, after having sent the e-mail to a group of recipients and then going to Hotmail to forward my email sent, attachments are reversed - another BUG that should be reported and fixed.

  Software should work intuitively that the user expects!

• Why are the ' and @ reverse?

  "everthine else on the keyboard seems well used English uk but t it @ and the" are reversed...

  Hi Alan,

  This happens usually if there is a keyboard that is poorly defined in the Panel control, keyboards & languages.

  Please go through these links and make the necessary changes, as indicated.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/the-sign-and-are-reversed-on-my-keyboard/916815df-A265-E011-8dfc-68b599b31bf5

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/why-is-the-symbol-found-by-hitting-shift2/966856b5-b745-E011-9577-d485645a8348

  Hope this information helps. If you have any questions, let us know.

• Several masks and reversed

  I added a mask and it reversed and want to get the same effect on several masks, but when I put all others to just subtract makes black instead of use the effect. What should I do?

  Screenshot for reference:

  

  No need for an adjustment layer. The screenshot is not very clear, but you applied hue and then seven masks but only mask 1 is selected in the effect of the composition.

  Here's how to do it correctly. Draw your seven masks. The mode of addition for masks will give you seven circles. Change the mode to subtract and you will have seven holes in your layer. Now apply the tint effect and her centrifuge Compositing options and tap the + 7 times for all seven masks as composition of the layer options. EZ, quick and for this purpose better than an adjustment of the layer.

  When you have problems with an effect or a procedure the first thing you can do is to select the layer and press the U key twice to reveal all updated the layer properties. If the solution is not obvious, and then type the name or the effect, or the procedure you use in the field search for help in the upper right of the AE and discover the resources of the community. You will find generally better training than if you just start poking around Google or YouTube. You have your trainers to sift through and make sure that they know enough for you point to the effective techniques and good workflow. About half of the training on YouTube isn't very good and there are a bunch of it that will teach you bad habits and terrible workflows.

  Just in case where you're not the explanation here is what should be your model.

  

• Help! Question of layer mask and reverse brush colors

  For days now, I was unlucky in my quest to find an answer as to why my brushes became out of whack. When I use a brush and paint on the same area, the colors are reversed in this area! Ive set brush settings by default, but the question will not let me be! Layer masks have become another issue. The white rush works but not the black. Opacity and flow is set to 100. Please help because nobody has found an answer.

  You can post a screenshot? Looks like your blending mode of the brush is put on the screen and not normal.

• selective reverse and reverse?

  Hello world
  
  in the defination for the model tab, we have the option 'display metadata changes in the model tree '.
  
  I used to think whenever I make changes in my columns related to the source or target, I'll get the changes to update here, but I tried to change the length of the columns. It forces to see the place, so I did selective opposite to this table and he showed me.
  
  but when I do the opposite right click I see all the changes and all temporary tables created by ODI.
  
  1. What is the diff between opposite selective and do a right-click reverse?
  2. how the changes automatically appear in ODI whenever I have changes to the structure of the source or target. without clicking on the back?
  
  Thank you
  Dev

  Hello
  You can narrow the list by writing some Commons 'letters' to the mask but not more than that...