Spreadsheet file format

Similar Questions

• A different ways of the spreadsheet file format

  Is it possible to have several methods for writing custom Spreadhseet formatting? As if I had a picture I want to have columns specific to the format in different ways. Or can you format only the entire file spreadhseet go?

  Thank you

  Konrad

  Joined a VI that does exactly what you want. It is implemented in the easiest way possible, write data to the disk a line at a time. If you have more than a few thousand lines, you want to do it more effectively. Let me know if you need this change.

  The code is in LabVIEW 2011.

• Incorporate the binary string in the string spreadsheet file

  Hello LabVIEW wizards...

  So I use scripture to VI file spreadsheet to create a beautiful layout, tabs-delimited report of one of my programs for the acquisition of data file. In one of the cells in the resulting worksheet file that I want to put a binary string of all my control values so when you open the data file all the control parameters used for its manufacture are restored, but the string is hidden when the report is displayed in Excel.

  The problem is that the binary string flattened uses tabs and returns as part of its syntax the Spreadsheet File this VI to Write it's going in all directions. Worse yet, I can't unflatten chain when I open the file text because of "corrupt data or unexpected".

  If I concatenate the string flattened with quotes around it she is superb and is placed in a single cell in Excel, but when I open the file in LabVIEW that she is still several elements in the array. I've isolated the binary string using the file VI text reading and got a subset of the quoted string, but it still unflatten correctly.

  Essentially, I need to know how to get LabVIEW to pull a string literal full of special characters into a spreadsheet file and it unflatten. Any gurus what help you can provide is greatly appreciated.

  Thank you

  Jordan

  Jordan

  I suggest that you change the formatting of your chain shipped by replacing the tabs and returns with other characters that are not considered as commands by the spreadsheet functions. Without knowing how you represent your control binary values, I can't offer specific characters.

  If two non-printable characters exist which do not appear in the control data, it's easy: just find and replace tabs and returns with those characters.  If there is no character, then something more complex needs to be done for example to escape special characters.  Or create two subVIs - one to remove the tabs and returns before writing the string in the file and the other to restore after reading.

  Lynn

• Problem using: read the spreadsheet file

  Hello

  I have 2 problems with reading spreadsheet file:

  (1) for the use of .txt file I can get the first column and not the other (even if I chose the correct output...)

  (2) this does not at all when you use my .xls file

  I must do something wrong but can't find what...

  Has anyone an idea?

  I have attached the .VI and my two files.

  Thank you

  User

  A native Excel file is NOT a text file.  It is a format of custom file created by Microsoft.  This is why you must use ActiveX to interact with him.

  The worksheet ' ' folder features found in the work of LabVIEW with text files (delimited by tabs, CSV, etc.).  The text files are a format more generic that can be read by programs such as Notepad.  Tried to use Notepad to open an .xls file?  It does not work.  Excel can open a text file, because it is a generic format.

  So even if everyone automatically thinks "Excel" when they see the word "Spreadsheet", the two are not synonymous.  In the case of LabVIEW, 'Spreadsheet' made reference to a delimited text file.

  Who is?

• day: hour: min:second of logging in a writing on a spreadsheet file

  I need to write a timestamp date time format: day: min:second (25:13:23:56) in a spreadsheet file.   Ideally using the output of ' string of Format Date/time ' and enter a 'table to build' there it goes into writing to the worksheet.  The only reason why it's required format is because I already have a program of scientific data logging 10metres upward and running.  It uses the timestamp of a Datetime.vi who takes the form of integer 132356.

  Thanks in advance for your help

  
  

• How to remove header, time and date of the Subvi "export waveforms to the spreadsheet file?

  I use 'Export waveforms for spreadsheet File.vi' in order to export the labview data into a file.

  However, the default format is the following:

  waveform [0]
  T0 13/11/2009 14:54:34
  Delta t 0.001000

  time Y [0]
  2009-11-13 14:54:34 - 2.441406E - 3
  2009-11-13 14:54:34 - 2.441406E - 3
  2009-11-13 14:54:34 0.000000E 0

  Yet I am interested in only the actual data without header or stamp date and time, for example:

  -2.441406E - 3

  -2.441406E - 3

  0.000000E + 0

  Could someone help me please with the adaptation of the Subvi to my needs?

  Transposes set to true.

• How to write variables in the spreadsheet file

  I run an application in run in continuous mode.

  One of the variables change over time (it is inside a while loop and is part of the task of data acquisition). I want to record all the values this variable can take during execution and save them in a spreadsheet file?

  How this can be done?

  Give this example look on.  I am open a file before the beginning of my main loop and its closure after the main loop.  Inside the loop, I am formatting my data in a string of tabs.  I then save this string in the file.

  

• I get an error that the file format is not supported on the opening of excel, pdf, and images.

  When I open excel spreadsheet that looks like they are encrypted, and I can't read them. diag box says that the file is not a recognizable format

  PDF message is not that a type of supported file file was damaged

  When I try to see the photos I get a message that the file format is not supported

  any suggestions?

  Hello

  Please contact the Microsoft Community.

  I wish that you refer to this article and choose the default program to open files-

  http://Windows.Microsoft.com/en-us/Windows/change-default-programs#1TC=Windows-Vista

  We know if that helps.

• How can save us in 2003 spreadsheet XML format PDF using IAC?

  Hi all
  

  I'm trying to pro-grammatically to save the PDF document in XML Spreadsheet 2003 Format.

  Manually, I would go to file > save as > spreadsheet > 2003 spreadsheet XML, to reading the documentation, I expected that I could achieve the same way (c# and IAC). AvconversionconvertFromPDFWithHandler () method is used to save the format d/f pdf file.

  How can we do this task please help me.

  Thanks in advance

  
  

  Concerning

  Pawan Pant

  AvconversionconvertFromPDFWithHandler is a plugin method, not of IAC.

• Should I change file Format for CD burning

  I'm new with this please bare with me. What I can say all the music I have purchased through iTunes is in the AAC Audio file format. All the music that I imported into iTunes MY Cd collection has been imported with the Apple Lossless Audio File.

  My question is the sound quality of the BEST CD, do I have to convert the music I bought, with is in the ACC Audio, Apple Lossless file format, then burn to the CD? There should just go with the Audio of the right VAC on CD file. I ask this for music that I bought. All the other songs I imported CD into itunes is already Apple Lossless. I am not concerned about the larger files, just to get the best sound quality for CD.

  Hi 80vette,

  Thank you for using communities Support from Apple!

  I see you are eager to learn more about the quality of the music, and if you can do something else to get them to a better quality.  Now it is possible to convert your AAC to Apple Lossless files, the only change you will see is a significant increase of disk space being absorbed by these songs.  Simply put, you can put the lossless format, but you will hear no audio enhancement.  In addition, encoded AAC files downloaded from the iTunes Store already compete with the quality that you hear on a CD of music retail:

  AAC encoded files compete with the quality of the audio CD and sound as good or better than MP3 files encoded in same or even a high sampling rate. For example, a 128 kbps AAC file should sound as good or better than a 160 Kbps MP3 file. Because the flow is weaker, the AAC file is also smaller than the MP3 file.

  12 iTunes for Windows: AAC

  See you soon.

• When opening .doc website link, FF adds .docx file extention & does not open in Word 2010, with incorrect file format error. Pls Help

  I use Firefox v12 to open a hyperlink to a Web site that points to a door MS Word Document to download.

  Then, we are asked to open the file with MS Word (default), which is our installed version of MS Word 2010.

  Firefox then renames the file by adding a .docx file name for example filename.doc.docx. MS Word 2010 opens with the error "invalid file format", which is correct that Firefox has renamed.

  Is there a fix or a workaround for this?

  You can try to delete the mimeTypes.rdf file in the Firefox profile folder to reset all the actions file.

  • http://KB.mozillazine.org/mimetypes.RDF
  • http://KB.mozillazine.org/File_types_and_download_actions#Resetting_download_actions

• File formats

  Can someone tell me if the 3D data captured via the germs can be exported as wrl, obj, or stl file? If this isn't the case, Sprout files can be imported into 3D Studio Max, manipulated and then exported to print via a 3D printer?

  Thank you

  Hi there @QuasiMaximus
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for more information on the file formats used by capture 3D on the germ.  I'm happy to help you with this.

  I found this post on the forum where State developers who take in charge for obj, is coming, but not yet included from January 2015.

  3D scanning of objects in 3D - it's files work? -sprout.hp.com

  The same post indicates that the scans themselves are stored in the following location:

  {USER_FOLDER} \AppData\Local\Hewlett-Packard\Sprout\Workspace\AssetRepository\3dCaptures

  However, I also found this video on youtube that shows you how to find the hidden obj files generated by the germ.

  How to access the format file OBJ on the Hp germ - youtube.com

  I hope this is a help to you. If that answered your question, please mark this message as a solution.

• RAW file format

  No chance, F65/55/5 raw file format is available?

  See you soon.

  You ask for someone to post a clip of RAW file original download?

• Excel does not recognize this file format

  I've been using excel (Office: mac 2011) for some time. All of a sudden excel opens. I'm getting different error messages such as: "Excel does not recognize this file format" and "There is a problem with the database of the Office". I use OS X EL Capitan 10.11.3 version with my iMac. I tried to uninstall Office: mac & reinstall it with the disk. He re - installs OK but won't open without error message... The rest of the Apps, for example. "Word, Powerpoint open OK. The problem is only with excel. Someone had a similar problem?

  Since your problem is with Excel, you might get a better answer here http://answers.microsoft.com/en-us?auth=1

• *. SEQ file format has any difference when it is deployed

  A *.seq File Format has any difference when the system is deployed on a tester with the deployment only license?

  I guess that the File Format affects only when you run the sequences in TestStand Development. But I may be wrong, that's why I ask.

  Thank you

  Reference of best practices:

  File format
  File format can affect the speed and performance. Before TestStand 4.0, all sequences have been saved to the INI format.
  TestStand 4.0 and later versions lets you record movies in three formats: INI, XML and binary. Binary format
  offer the faster load and save time and also generates smaller files. You can specify which format to use for new
  dialog box sequence files by clicking on the Options of Format of file button in tab Preferences of Options of Station. TO
  change the format of an existing sequence file, choose the editing command' file of sequence properties and select File Format on the
  General tab.

  The format will not change when it is deployed.  You see it change?  You can test it by opening in a text editor in both cases and see if they look.

  Kind regards