SQL Developer Data Modeling, no Option from Menu Design

Similar Questions

• How to create Spatial indexes in SQL Developer Data Modeler 4

  Hello

  What is the procedure to create a Spatial index in SDDM v4? I found myself at an impasse because of the following problems:

  (1) retro-engineering rate the spatial index, then I need to add them manually.

  (2) adding an index does not allow me to check the 'spatial', and does not allow me to add the sdo_geometry column in the index definition.

  (3) for the registration of the spatial properties for a table, I can not choose the name of the Spatial Index.

  I came across an old post (Data Modeler - cannot create a spatial index), but this post is no longer valid because SDDM V4 does not allow me to create an index without columns (definition of the incomplete index).

  Help is appreciated,

  Kind regards

  Richard.

  Hi Richard,

  Thanks for your update.  I'm scared, I was assuming you were using the stand alone rather than SQL Developer Data Modeler.

  I tried using SQL Developer 4.1.0.18.37 (ai2) using a thin connection and got the ClassCastException you have found.

  But when I used ai2 autonomous, maker of data using the same login details 'Advanced', it worked OK and imported from the spatial index.

  (I'm puzzled as to why these two seem to behave differently, as this is the version ai2 data integrated with SQL Developer ai2 maker).

  I then plugged and reverse engineering the same tables (yet) in a new model.

  Funny is that there is no error in the external journal this time, but the spatial properties are still not retroconcues correctly.

  Is it possible that you have not set the option to import the spatial properties?  I expect that the spatial properties would be imported or that the error should be registered.

  SQL Developer ai2 imported properly the spatial properties and the spatial index, when I used a basic connection and specified host, port, and SID or Service name.

  Another issue: SQL Developer relies on a certain JDK / JDBC library?

  Any Java JDK 1.8 should be good.

  David

• SQL Developer Data Modeler: logic model, impossible to create the arc

  I have a logic model in SQL Developer Data Modeler. Entity A has two 'incoming' relations of foreign entities B and C keys. The two releations have the same cardinality and optionality. I want to place the two relationships in an arc. I see the buttons in my menu to the toolbar, but they are not enabled. Even when I select the two relationships is not.
  
  What is the logic model for the relational model creates foreign keys. These foreign keys can be selected and when I do that the button "create a new arc" in the toolbar of the model relationship is enabled.
  
  What Miss me in the logic model...? The documentation does not give a clue.
  
  Erik

  Erik,

  You must select the relationships and the entity, then the CRA buttons are enabled.

  Sue

• SQL Developer / Data Modeler - lost visual on the relationships between the tables

  11 GR 2 DBMS / SQL Developer 4.0.3

  In SQL Developer, using the Data Modeler I lost the visuals 'lines' (one to several, etc.) which show the PK to FK relationship between different tables from one of my patterns of relationship.  I know they exist - I'm sure it's my fault--put out something that I don't have.

  I looked on the web but without SOAP.  Can anyone tell me if it is a property and (as applicable) how to re - turn on the property.

  Thanks in advance.

  Barry D.

  Sorry - I found it - the relationship lines were VERY clear yellow and I could barely see it.

  Article by Jeff Smith on the model configuration screen has been very useful in this regard.

  http://www.thatjeffsmith.com/archive/2013/01/Configuring-display-of-model-relationships-in-Oracle-SQL-Developer-Data-Modeler/

  Thank you Jeff (again).

  Barry D

• Language SQL Developer Data Modeling

  When I installed SQL Developer Data Modeling 4.0, it came out a German version (maybe because I have German Windows).

  Now, the documentation is in English, it designates the menu names of dialog boxes with English names, I find not in the product.

  Thus, forum entries refer to the English properties.

  What should I do to install this product with the English language?

  Hello

  You should be able to find some datamodeler.conf and datamodeler64.conf in the datatamodeler/datatamodeler/bin subfolder of the folder that you installed (uncompressed) Data Modeler 4.0.0.833 in.

  David

• How can I find out what is the cause of this error in SQL Developer Data Modeler

  Friends,
  
  I am trying to import features in SQL Developer Oracle Designer 10.1.2.3 Data Modeler.
  
  If you need perform the following steps to import:
  
  Template file-> Import-> Oracle Designer-> select connection to the base-> select work area-> select System application-> select an entity-> click Finish-> begins to import
  
  
  During the import process, I see an alert with the message dialog box:
  

  There are errors in import - check Log file 

  Clicking Ok dismisses the alert box, and I see the following summary screen:
  

  Oracle SQL Developer Data Modeler Version: 2.0.0 Build: 584
  Oracle SQL Developer Data Modeler Import Log
  Date and Time: 2010-08-09 14:27:26
  Design Name: erdtest
  RDBMS: Oracle Database 10g
  
            All Statements:           32
            Imported Statements:      32
            Failed Statements:           0
            Not Recognized Statements:      0

  The entity appear in the logical view in SQL Developer Data Modeler.
  
  While they were inspecting the log file, I see the following entry:
  

  2010-08-09 13:50:34,025 [Thread-11] ERROR ODExtractionHandler - Error during import from Designer Repository 
  
  java.lang.NullPointerException
       at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.createArcs(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.generate(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.ODExtractionHandler.generateDesign(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.ODExtractionController$Runner.run(Unknown Source)
       at java.lang.Thread.run(Thread.java:619)

  Anyone can shed light on this error?
  
  Thanks in advance for any help you may be able to provide.

  We have identified that objects recovered and on the branches are not considered by the Data Modeler. This bug has been connected (#10022016) and is being implemented.

  What

• Descriptions of SQL Developer Data Modeling Information

  Hello
  
  I'm new to SQL Developer Data Modeler. Is there a way to display on data flow diagram, the descriptions on the lines of flow of Information.
  
  Concerning
  ADE

  Hi Ade.

  You can display the name of the stream - "General Options > graph > Show stream Name" option. If you need more descriptive names :).

  Philippe

• Oracle SQL Developer Data Modeler start error

  Hi all
  
  I just downloaded Oracle SQL Developer Data Modeling (2.0.0.57.0) [released July 1, 2009] by selecting the option ' Oracle SQL Developer Data Modeler for Windows (this zip file contains the JRE).
  
  After that I installed the same and tried to start clicking on datamodeler.exe, I get the following error message
  
  "Failed to create an instance of the JVM on the path:... \jdk\jre\bin\client\jvm.dll.
  
  On the same machine, I can successfully run the SQL Oracle program without error. My machine is having Windows XP Professional SP3.
  
  Any ideas? If there is a problem with Java, that of the Oracle SQL Developer should also not run. But as I said it runs with any error, but the Oracle SQL Developer Data Modeler gives the above error.
  
  Kind regards
  
  JAA149

  Hey Jawad,

  you wrote you have 960 MB of RAM - how did you do a test with 1.5 MB of RAM and 2 MB of RAM?
  No doubt this is a problem of memory - memory change in the datamodeler.conf file option:
  -There 'AddVMOption-Xmx768M"by default; to take
  -"AddVMOption-Xmx512M" or never, making it suitable for your configuration - you can check the available free memory first.

  Philippe

• SEVERE: Exception initialization 'oracle.dbtools.crest.fcp.DataModelerAddin' extension ' Oracle SQL Developer Data Modeling

  After some testing today with a new installation and plugin subversion in the latest edition of data Modeler this error happens with every start of the tool.

  Have removed and unzipped the installation once again without changing the error.

  After that, I started with another user on my computer, it the error does not occur.

  Is there a system folder to remove the configuration of my personal like jdeveloper and sql developer?

  I lose the most important features, for example. have no browser and cannot open a design.

  Here is the full error stack:

  29 may 2015 22:17:40 oracle.ideimpl.extension.AddinManagerImpl

  SEVERE: Exception initialization 'oracle.dbtools.crest.fcp.DataModelerAddin' extension ' Oracle SQL Developer Data Modeling

  java.lang.NullPointerException

  at oracle.dbtools.crest.swingui.editor.UDPLibrariesPersistence.load(UDPLibrariesPersistence.java:220)

  at oracle.dbtools.crest.model.design.DesignSet.createElement(DesignSet.java:56)

  at oracle.dbtools.crest.swingui.ApplicationView.addDesign(ApplicationView.java:2497)

  to oracle.dbtools.crest.swingui.ApplicationView. < init > (ApplicationView.java:435)

  to oracle.dbtools.crest.swingui.ApplicationView. < init > (ApplicationView.java:389)

  at oracle.dbtools.crest.swingui.ApplicationView.getInstance(ApplicationView.java:2258)

  at oracle.dbtools.crest.fcp.DataModelerAddin.initialize(DataModelerAddin.java:553)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:496)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:483)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManagerImpl.java:299)

  at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:160)

  at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:143)

  at oracle.ide.IdeCore.initProductAndUserAddinsAndActionRegistry(IdeCore.java:2294)

  at oracle.ide.IdeCore.startupImpl(IdeCore.java:1817)

  at oracle.ide.Ide.startup(Ide.java:772)

  at oracle.ide.osgi.Activator.start(Activator.java:209)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run(BundleContextImpl.java:711)

  at java.security.AccessController.doPrivileged (Native Method)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683)

  at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:381)

  at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:390)

  at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1176)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:559)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:544)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:457)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:243)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.internalStart(EquinoxLauncher.java:271)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.start(EquinoxLauncher.java:241)

  at org.eclipse.osgi.launch.Equinox.start(Equinox.java:258)

  at org.netbeans.core.netigso.Netigso.start(Netigso.java:191)

  at org.netbeans.NetigsoHandle.startFramework(NetigsoHandle.java:209)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1352)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1156)

  at org.netbeans.core.startup.ModuleList.installNew (ModuleList.java:340)

  at org.netbeans.core.startup.ModuleList.trigger (ModuleList.java:276)

  at org.netbeans.core.startup.ModuleSystem.restore (ModuleSystem.java:301)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:181)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:150)

  at org.netbeans.core.startup.Main.start (Main.java:307)

  at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:123)

  at java.lang.Thread.run(Thread.java:745)

  Hi Torsten,

  Thanks for reporting the problem. I logged a bug.

  You can view together as "list of system types" directory to "preference > Data Modeler"-probably no longer exists. I guess that the setting for this directory is empty when you start SQL Dev as a different user.

  Philippe

• Failed to connect to SQL Developer Data Modeling

  All,
  I use Oracle SQL Developer Data Modeler version 3.0.0.665 in an Oracle 10 g database environment. When I try to import CFDS, I get the following error message:
  

  NoSuchMethodError:
  oracle.i18.ntext.converter.CharacterConverterOGS.getInstance(I)Loracle/i18n/text/converter/CharacterConverter;

  I use the same connection to Oracle SQL Developer version 1.5.0.53 profile and my connection works fine here, but the same credentials in the Modeler SQL Developer data fails with the above error message. All thoughts, what causes this connection problem?
  
  Thank you
  
  
  Seyed

  Seyed salvation,

  Here you can watch BOF solution http://forums.oracle.com/forums/thread.jspa?messageID=9497361�

  Philippe

• Oracle SQL Developer with SQL Developer Data Modeler

  Friends,
  
  I'm trying to understand the differences between Oracle SQL Developer Data Modeler and the possibility to use the SQL Developer Data Modeler.
  
  I have looked at two home pages produced on OTN, http://www.oracle.com/technology/products/database/datamodeler/index.html & http://www.oracle.com/technology/products/database/sql_developer/index.html and would appreciate your comments on my findings so far
  
  (1) the Oracle SQL Developer Data Modeler is a paid product stand-a-lone while using the Data Modeler of SQL Developer feature is free
  
  (2) the Data Modeler in SQL Developer functionality is basically a "viewer" I create my existing table of DR. by dragging in the Modeler in the object browser, but that's all. I can't save the diagram for later use or use to change the structure of the or the tables
  
  (3) if I need to have 'Oracle Designer' as ERD capability so I need to use Oracle SQL Developer Data Modeler (after purchase!)
  
  (4) are there other differences that I missed?
  
  
  Thanks in advance

  Yes, you've nailed it!

  Have fun
  K.

• SQL Developer Data Modeling 2.0.0 - licensing conditions?

  Hi Sue & Co.
  
  I just downloaded SQL Developer Data Modeling 2.0.0. Very cool.
  
  News about the terms of the license?
  
  See you soon,.
  Patrick

  Hello Patrick,.

  http://www.Oracle.com/corporate/pricing/technology-price-list.PDF

  Concerning
  Marcus

• SQL developer data modeling (Access in PB table?)

  Hi guys,.
  
  the sql Data Modeler is able to connect to a database?
  
  I'm a relational design I need to use an EXISTING table in my table of production...
  He has a lot of columns...
  
  so, I don't want to create a new table to imitate this existing table in the database...
  
  anyway I can do?
  
  Thank you.
  
  Published by: OracleWannabe on January 1st, 2009 22:45

  Hello

  Yes, you can import from the database - use "file > import > data dictionary" menu option. You can import the following databases:
  -Oracle 9,10,11;
  -MS SQL Server - 2000, 2005;
  -IBM DB2 - for OS/390 and LUW (Linux, Unix, and Windows) - 7.8
  -a database using the JDBC/ODBC bridge - results depends on the implementation of ODBC drivers, used.

  Data modeling Oracle comes with drivers for the Oracle database. Please read the release notes to see how to extract and add drivers from IBM and Microsoft http://www.oracle.com/technology/products/database/sql_developer/files/releasenotes525.htm

  Best regards
  Philippe

• SQL Developer, Data Modeler, cannot print

  I can't print any logic or relationship patterns of the Data Modeler.
  I'm currently running SQL Developer 3.0.04 on a Windows 7 PC and my printer works fine.
  When I run the print menu, it shows the number of pages that must be printed OK, I invoke the impression, but blank pages are printed.
  The sequence of menu that I used is:
  File Data-> shape-> print-> print.
  Any suggestions would be helpful, please advise.

  You can look here Re: problem with printing of relational diagram

  Philippe

• 'Oracle SQL Developer Data Modeling required repository report'

  Hi all
  
  Try to use model data of SQL Dev EA 2.1 reports, but whenever I try to connect to a database I get message 'Oracle SQL Developer maker data reporting repository.' necessary
  
  No idea how to fix this?
  
  Thank you

  Hello

  You can create from Modeler data using "file > export > schema considered" feature - repository will be created with the first exported design.

  Philippe