Oracle SQL Developer with SQL Developer Data Modeler

Similar Questions

• SEVERE: Exception initialization 'oracle.dbtools.crest.fcp.DataModelerAddin' extension ' Oracle SQL Developer Data Modeling

  After some testing today with a new installation and plugin subversion in the latest edition of data Modeler this error happens with every start of the tool.

  Have removed and unzipped the installation once again without changing the error.

  After that, I started with another user on my computer, it the error does not occur.

  Is there a system folder to remove the configuration of my personal like jdeveloper and sql developer?

  I lose the most important features, for example. have no browser and cannot open a design.

  Here is the full error stack:

  29 may 2015 22:17:40 oracle.ideimpl.extension.AddinManagerImpl

  SEVERE: Exception initialization 'oracle.dbtools.crest.fcp.DataModelerAddin' extension ' Oracle SQL Developer Data Modeling

  java.lang.NullPointerException

  at oracle.dbtools.crest.swingui.editor.UDPLibrariesPersistence.load(UDPLibrariesPersistence.java:220)

  at oracle.dbtools.crest.model.design.DesignSet.createElement(DesignSet.java:56)

  at oracle.dbtools.crest.swingui.ApplicationView.addDesign(ApplicationView.java:2497)

  to oracle.dbtools.crest.swingui.ApplicationView. < init > (ApplicationView.java:435)

  to oracle.dbtools.crest.swingui.ApplicationView. < init > (ApplicationView.java:389)

  at oracle.dbtools.crest.swingui.ApplicationView.getInstance(ApplicationView.java:2258)

  at oracle.dbtools.crest.fcp.DataModelerAddin.initialize(DataModelerAddin.java:553)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:496)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:483)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManagerImpl.java:299)

  at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:160)

  at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:143)

  at oracle.ide.IdeCore.initProductAndUserAddinsAndActionRegistry(IdeCore.java:2294)

  at oracle.ide.IdeCore.startupImpl(IdeCore.java:1817)

  at oracle.ide.Ide.startup(Ide.java:772)

  at oracle.ide.osgi.Activator.start(Activator.java:209)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run(BundleContextImpl.java:711)

  at java.security.AccessController.doPrivileged (Native Method)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683)

  at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:381)

  at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:390)

  at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1176)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:559)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:544)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:457)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:243)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.internalStart(EquinoxLauncher.java:271)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.start(EquinoxLauncher.java:241)

  at org.eclipse.osgi.launch.Equinox.start(Equinox.java:258)

  at org.netbeans.core.netigso.Netigso.start(Netigso.java:191)

  at org.netbeans.NetigsoHandle.startFramework(NetigsoHandle.java:209)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1352)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1156)

  at org.netbeans.core.startup.ModuleList.installNew (ModuleList.java:340)

  at org.netbeans.core.startup.ModuleList.trigger (ModuleList.java:276)

  at org.netbeans.core.startup.ModuleSystem.restore (ModuleSystem.java:301)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:181)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:150)

  at org.netbeans.core.startup.Main.start (Main.java:307)

  at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:123)

  at java.lang.Thread.run(Thread.java:745)

  Hi Torsten,

  Thanks for reporting the problem. I logged a bug.

  You can view together as "list of system types" directory to "preference > Data Modeler"-probably no longer exists. I guess that the setting for this directory is empty when you start SQL Dev as a different user.

  Philippe

• Oracle SQL Developer Data Modeler start error

  Hi all
  
  I just downloaded Oracle SQL Developer Data Modeling (2.0.0.57.0) [released July 1, 2009] by selecting the option ' Oracle SQL Developer Data Modeler for Windows (this zip file contains the JRE).
  
  After that I installed the same and tried to start clicking on datamodeler.exe, I get the following error message
  
  "Failed to create an instance of the JVM on the path:... \jdk\jre\bin\client\jvm.dll.
  
  On the same machine, I can successfully run the SQL Oracle program without error. My machine is having Windows XP Professional SP3.
  
  Any ideas? If there is a problem with Java, that of the Oracle SQL Developer should also not run. But as I said it runs with any error, but the Oracle SQL Developer Data Modeler gives the above error.
  
  Kind regards
  
  JAA149

  Hey Jawad,

  you wrote you have 960 MB of RAM - how did you do a test with 1.5 MB of RAM and 2 MB of RAM?
  No doubt this is a problem of memory - memory change in the datamodeler.conf file option:
  -There 'AddVMOption-Xmx768M"by default; to take
  -"AddVMOption-Xmx512M" or never, making it suitable for your configuration - you can check the available free memory first.

  Philippe

• Failed to connect to SQL Developer Data Modeling

  All,
  I use Oracle SQL Developer Data Modeler version 3.0.0.665 in an Oracle 10 g database environment. When I try to import CFDS, I get the following error message:
  

  NoSuchMethodError:
  oracle.i18.ntext.converter.CharacterConverterOGS.getInstance(I)Loracle/i18n/text/converter/CharacterConverter;

  I use the same connection to Oracle SQL Developer version 1.5.0.53 profile and my connection works fine here, but the same credentials in the Modeler SQL Developer data fails with the above error message. All thoughts, what causes this connection problem?
  
  Thank you
  
  
  Seyed

  Seyed salvation,

  Here you can watch BOF solution http://forums.oracle.com/forums/thread.jspa?messageID=9497361�

  Philippe

• How can I find out what is the cause of this error in SQL Developer Data Modeler

  Friends,
  
  I am trying to import features in SQL Developer Oracle Designer 10.1.2.3 Data Modeler.
  
  If you need perform the following steps to import:
  
  Template file-> Import-> Oracle Designer-> select connection to the base-> select work area-> select System application-> select an entity-> click Finish-> begins to import
  
  
  During the import process, I see an alert with the message dialog box:
  

  There are errors in import - check Log file 

  Clicking Ok dismisses the alert box, and I see the following summary screen:
  

  Oracle SQL Developer Data Modeler Version: 2.0.0 Build: 584
  Oracle SQL Developer Data Modeler Import Log
  Date and Time: 2010-08-09 14:27:26
  Design Name: erdtest
  RDBMS: Oracle Database 10g
  
            All Statements:           32
            Imported Statements:      32
            Failed Statements:           0
            Not Recognized Statements:      0

  The entity appear in the logical view in SQL Developer Data Modeler.
  
  While they were inspecting the log file, I see the following entry:
  

  2010-08-09 13:50:34,025 [Thread-11] ERROR ODExtractionHandler - Error during import from Designer Repository 
  
  java.lang.NullPointerException
       at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.createArcs(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.generate(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.ODExtractionHandler.generateDesign(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.ODExtractionController$Runner.run(Unknown Source)
       at java.lang.Thread.run(Thread.java:619)

  Anyone can shed light on this error?
  
  Thanks in advance for any help you may be able to provide.

  We have identified that objects recovered and on the branches are not considered by the Data Modeler. This bug has been connected (#10022016) and is being implemented.

  What

• How to create Spatial indexes in SQL Developer Data Modeler 4

  Hello

  What is the procedure to create a Spatial index in SDDM v4? I found myself at an impasse because of the following problems:

  (1) retro-engineering rate the spatial index, then I need to add them manually.

  (2) adding an index does not allow me to check the 'spatial', and does not allow me to add the sdo_geometry column in the index definition.

  (3) for the registration of the spatial properties for a table, I can not choose the name of the Spatial Index.

  I came across an old post (Data Modeler - cannot create a spatial index), but this post is no longer valid because SDDM V4 does not allow me to create an index without columns (definition of the incomplete index).

  Help is appreciated,

  Kind regards

  Richard.

  Hi Richard,

  Thanks for your update.  I'm scared, I was assuming you were using the stand alone rather than SQL Developer Data Modeler.

  I tried using SQL Developer 4.1.0.18.37 (ai2) using a thin connection and got the ClassCastException you have found.

  But when I used ai2 autonomous, maker of data using the same login details 'Advanced', it worked OK and imported from the spatial index.

  (I'm puzzled as to why these two seem to behave differently, as this is the version ai2 data integrated with SQL Developer ai2 maker).

  I then plugged and reverse engineering the same tables (yet) in a new model.

  Funny is that there is no error in the external journal this time, but the spatial properties are still not retroconcues correctly.

  Is it possible that you have not set the option to import the spatial properties?  I expect that the spatial properties would be imported or that the error should be registered.

  SQL Developer ai2 imported properly the spatial properties and the spatial index, when I used a basic connection and specified host, port, and SID or Service name.

  Another issue: SQL Developer relies on a certain JDK / JDBC library?

  Any Java JDK 1.8 should be good.

  David

• SQL Developer / Data Modeler - lost visual on the relationships between the tables

  11 GR 2 DBMS / SQL Developer 4.0.3

  In SQL Developer, using the Data Modeler I lost the visuals 'lines' (one to several, etc.) which show the PK to FK relationship between different tables from one of my patterns of relationship.  I know they exist - I'm sure it's my fault--put out something that I don't have.

  I looked on the web but without SOAP.  Can anyone tell me if it is a property and (as applicable) how to re - turn on the property.

  Thanks in advance.

  Barry D.

  Sorry - I found it - the relationship lines were VERY clear yellow and I could barely see it.

  Article by Jeff Smith on the model configuration screen has been very useful in this regard.

  http://www.thatjeffsmith.com/archive/2013/01/Configuring-display-of-model-relationships-in-Oracle-SQL-Developer-Data-Modeler/

  Thank you Jeff (again).

  Barry D

• Language SQL Developer Data Modeling

  When I installed SQL Developer Data Modeling 4.0, it came out a German version (maybe because I have German Windows).

  Now, the documentation is in English, it designates the menu names of dialog boxes with English names, I find not in the product.

  Thus, forum entries refer to the English properties.

  What should I do to install this product with the English language?

  Hello

  You should be able to find some datamodeler.conf and datamodeler64.conf in the datatamodeler/datatamodeler/bin subfolder of the folder that you installed (uncompressed) Data Modeler 4.0.0.833 in.

  David

• SQL Developer Data Modeling, no Option from Menu Design

  Using SQL Developer 3.0.04 Build HAND - 04.34 with maker of data. I have created a logical design and want to préconcevoir it to a relational model.
  
  I can't seem to find the option from Menu creation to use the > > engineer relational model option that is available under the design Menu on the version of stand-alone SQL Developer Data Modeler.
  
  Have checked the following locations:
  
  Tools-> Data Modeling
  Display Data-> shape
  File-> Data Modeling
  
  Right-click on my logical design
  
  I have this all of my entities have the engineer to a relational model valid property value.
  
  Is this a bug or am I missing a menu option / setting of the configuration?
  
  Thanks in advance for any help
  John

  Hi John,.

  You can find "> engineer to relational Mode" button among the other buttons for logical diagram.

  Philippe

• SQL Developer Data Modeling 2.0.0 - licensing conditions?

  Hi Sue & Co.
  
  I just downloaded SQL Developer Data Modeling 2.0.0. Very cool.
  
  News about the terms of the license?
  
  See you soon,.
  Patrick

  Hello Patrick,.

  http://www.Oracle.com/corporate/pricing/technology-price-list.PDF

  Concerning
  Marcus

• SQL for SQL Server 2008 Developer Data Modeler

  I am not able to connect to my SQL Server 2008 since the SQL Developer Data Modeler. Although I jtds - 1.2.jar my machine and I can connect SQL server through the SQL Developer, but still I am not able to connect through the Data Modeler. I need to rethink and to generate the data model for some existing patterns.
  
  Here's what I'm following: -.
  
  File Data-> shape-> import-> data dictionary-> add-> new JDBC, ODBC Bridge connection-> other third-party driver
  
  now when I give driver and the JDBC URL, it throws an error message indicating that the driver is not found.
  
  Please let me know what I can do to fix this problem, any help would be appreciated.
  
  Kind regards
  AVA

  I would try 1 to connect to the db of sqldeveloper (by jtds - uninvolved to ODBC) and see if you can browse your sql db queries and question in a worksheet. Export this connection to xml format, and then import that Modeler.

• Descriptions of SQL Developer Data Modeling Information

  Hello
  
  I'm new to SQL Developer Data Modeler. Is there a way to display on data flow diagram, the descriptions on the lines of flow of Information.
  
  Concerning
  ADE

  Hi Ade.

  You can display the name of the stream - "General Options > graph > Show stream Name" option. If you need more descriptive names :).

  Philippe

• SQL Developer Data Modeler: logic model, impossible to create the arc

  I have a logic model in SQL Developer Data Modeler. Entity A has two 'incoming' relations of foreign entities B and C keys. The two releations have the same cardinality and optionality. I want to place the two relationships in an arc. I see the buttons in my menu to the toolbar, but they are not enabled. Even when I select the two relationships is not.
  
  What is the logic model for the relational model creates foreign keys. These foreign keys can be selected and when I do that the button "create a new arc" in the toolbar of the model relationship is enabled.
  
  What Miss me in the logic model...? The documentation does not give a clue.
  
  Erik

  Erik,

  You must select the relationships and the entity, then the CRA buttons are enabled.

  Sue

• Oracle sql for data after the first occurrence of the hyphen

  Hi, I need oracle sql get data after the first occurrence of the hyphen.
  
  source of the string:
  ABCD - efgh
  
  I just want everything after the ' - '.
  
  someone help me please...
  
  Edited by: 1001076 on 28 may 2013 18:42

  Handle: 1001076
  Status level: Beginner
  Join date: April 18, 2013
  Messages total: 12
  Total Questions: 4 (3 pending)

  I offer you my condolences; Since you rarely get your questions answered here.

• 'Oracle SQL Developer Data Modeling required repository report'

  Hi all
  
  Try to use model data of SQL Dev EA 2.1 reports, but whenever I try to connect to a database I get message 'Oracle SQL Developer maker data reporting repository.' necessary
  
  No idea how to fix this?
  
  Thank you

  Hello

  You can create from Modeler data using "file > export > schema considered" feature - repository will be created with the first exported design.

  Philippe