SQL * Loader import problem with Eastern European files file

Similar Questions

• SQL Loader issue - CSV with commas and quotes IN the data

  Hello, I have a dataset for a simple table of 2 columns like this:

  Column 1, "it is given for"Column 2", with commas and quotes."

  Data are delimited by commas and may be surrounded by double quotes.  In ADDITION, it may include commas and quotation marks in the data fields.  I CANNOT manipulate data before sending it to SQL Loader.

  I set my file of control like this:

  DOWNLOAD THE DATA

  INFILE '. / TEST.dat'

  BADFILE '. / TEST. BAD'

  DISCARDFILE '. / TEST. DSC"

  REPLACE IN THE TEST TABLE

  Fields ended by ',' POSSIBLY BOX BY ' "' TRAILING NULLCOLS"

  (

  Col1 char (50),

  Col2 char (500)

  )

  
  

  Now when I run the present via SQLLDR, I get the following error in the log file:

  
  

  Sheet 1: Rejected - error on table TEST, column COL2.

  no terminator found after CLOSE and CLOSED field

  What are my options to get the loaded data as presented above?  I'm working on Oracle 11 g (11.2.0.3.0) 64-bit on AIX 6.1.0.0.

  Thank you!

  In this case, there is no way she can tell who's a delimiter or pregnant and which is part of the data.  As far as I know, there is no way that you can load it into the appropriate columns.

• problems with. ARW files and invigorating auto

  problems with. ARW files and invigorating auto

  I'll try to explain this, because this has happened in past and never found a way to solve, but I lived with it

  now that I have a Sony A7R the problem is more serious

  First I'm proud he realize the image in camera, I use DRO lvl 5 to get enough light, as when I'm shooting at dusk. DRO desire to do HDR but in a single file, it lightens the dark colors. in my camera, I'm happy with the results

  but when I download on lightroom, they come out almost black.

  Let me explain

  Let's say I have import 100 images

  I'll double check my preferences and everything is turned OFF when you want to import options, there is no auto toning, nothing.

  import the images I see glimpses in miniature that looks very good.

  I double click on one to enlarge, we go out so grid view.

  for a short 1 or 2 seconds, I see the full image in all its glory but that lightroom is doing something funny, it darkens the image

  an as she inspects every image, it was a DRO picture, it's too dark.

  to make this clear, the image is perfect, as it was in the beginning but after a few seconds, lightroom for some reason some think should be corrected.

  How we prevent lightroom to do this, I want the image exactly as it is, why lightroom must apply a correction >?

  I think we should do something with the interpretation of the raw file and lightroom applies its own algorithm.

  but here is what I get... until lightroom makes the change that I am able to testify the image exactly as he took and want unchanged...

  now, I have to edit each file or find a profile to which is added the work.

  any ideas how to prevent the ruin my lightroom images and just leave them as they were during the first time...

  There are 2 phases... it is when it imports initially and they look very well

  second are analysis each image and application of some type of toning that it darkens too.

  Thanks for the help

  Sorry, it's the yahoo email auto-reply message.

  I've now disabled

  thing is, there is no DRO jpg to download from the camera

  his only ARW. so my understanding is when I use the DRO setting, the camera makes changes to the ARW lightroom this bed somehow the ARW.

  but he comes back and unfortunately no DRO setting.

  because I noticed that if I take a normal image in his dark raw mode but if I apply dro to it, it comes out more bright, yet when I d/l the camera image in lightroom, which is an ARW - there no jpg files. Lightroom decides to BUMBLE

  So actually there is no interest to use DRO because when I download lightroom deletes.

  is there a way to tell lightroom to preserve the jpg preview as seen first.

  his right blade, image appears perfect... that lightroom do something, that bam, its ruin.

  What should I do to prevent ruin the image of lightroom? If it was good in the first place.

• Problems with the audit files!

  Hi friends,
  
  We are facing a problem with the audit files we have a runnning on oracle 10g server and being an Institute of teaching many ppl to connect to the server and too much work with SQL and PL/SQL. We have disabled the option to audit the database, but the audit files grow enormous in size. May I know what can be the problem and how to fix that there could be something that we would have missed.
  
  Kind regards
  Maury

  There is no setting of "verification". Display the values of

  AUDIT_FILE_DEST, AUDIT_SYS_OPERATIONS, AUDIT_TRAIL.

  I don't know 'NULL' as the value for each of these parameters.

  Werner

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF

• SQL * Loader - can I specify the log file in the control file

  SQL * Loader - can I specify the log file in the control file? If so how

  Yes,

  Try sqlldr "echo $command_line_par".

  Note: ' back quotes

  Kind regards

• Problem with the executable files, nothing works anymore.

  Hi, my name is Richard and I have a problem with my computer.

  None of my executables work more, they all stop responding when I open them up (if they even offer) This includes but is not limited to, my anti-virus and malware... Makes to solve this rather difficult.

  Note: Very important: when my computer starts, (he did not before) it now opens a tab of Google Chrome instantly with the url:

  http://gangnamgame.NET/

  With Korean words... It is clearly a malware problem, I think, but I can't fix it. And she is taken care of my computer because I can't open any program apart from the basics like wordpad and my browser.

  Please, I need help. I'm under W7U.

  I've tried https://support.microsoft.com/nl-nl/kb/950505, but when I tried to enter "REG IMPORT Exe.reg" nothing happened, just a black for 0.01 seconds and then screen nothing after that.

  Do not restore points having adapted makes things much more difficult. I suggest you try this approach. You need to do it quickly because Windows can replace the backup copy of the files of the register at any time.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some typing prudent . Ask a computer-savvy friend to help you if you lack experience in this field. You may reset your password to an earlier value.
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu.
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• photos of the iPhone are on the side and I can not turn because theres a problem with the property file

  Photos imported from my iphone came on the side and when I turn and try to save, it won't let me save it like that saying "windows Photo Viewer cannot save changes to this picture because there is a problem with the pictures of file properties". What should I do?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• problems with quality vs. file size in export to YouTube 1080 p

  Hello

  I used to use NCH videopad as a Publisher began. He had shocking performance but gives really good quality and small size files.

  That is to say, I could export 1080 p 30 min video of good quality for YouTube in less than 2 GB file size, but Premiere Elements can

  Get anywhere near the same quality, even at 4 GB.

  So what I need is someone to tell me the parameters I need.

  Currently I export the shadowplay film recorded in 1080 60 fps 50Mbits (according to shadowplay).

  If I export to AVCH (whatever) with YouTube Widescreen HD - set it to match the source, I can't

  get a good quality. I even put the target at 20 and the other at 18 and it is still grainy quality and file sizes

  4 GB. The only way I can get the same quality I received of Videopad is with a 7 GB file into elements.

  Today I tried to export a video (30 minutes) and all day trying to find a good setting, and

  each parameter gets me grainy footage.

  If someone can you please just give me the detailed settings, I need (without the jargon) please.

  The problem is with file sizes as what he deletes my additions to my half a string because

  limits on usage of my data.

  Thank you

  NeonsStyle

  corn

  I think that you need to remove temporarily and advanced then refreshed. Then go through the following.

  The first link in your last message does not, but that a second was full of information (really great).

  If this is supposed to represent the output of VideoPad, here's the story.

  1. you have an AVCHD.mp4 file MPEG2.mpg is not. The file is 1920 x 1080 @ a progressive frame.

  2. our goal is progressive rate - variable and not constant, noted that the 3 frames rate in playback of video properties...

  minimum frame rate = 10,000 frames per second

  frame rate = 29,888 frames per second

  maximum frame rate = 30,000 images per second

  First Elements not managed well with the video recorded with a variable rather than a constant rate. Symptoms range from Premiere Elements of audio desynchronization to not being able to import the video at all. The typical remedy is to take video in the free program of brake hand to get the H.264.mp4 with constant frame rate (29.97) model. Then, you take the export of brake hand in Premiere Elements project using first elements add Media/files and folders.

  https://handbrake.fr/

  Also note that VideoPad product export with a low flow, i.e. 7759 Kbps (equivalent to 7.7 Mbps). You were trying for 36 / 50 Mbps in the export of Premiere Elements. It is an explanation of the difference in size of the files that run you in your comparisons of software.

  Since you don't seem to be involved with video MPEG2.mpg, I write what follows for information purposes... What do you do with an xml file if you used the 1080p29.97 HDTV high quality predefined with Publish + share/computer/MPEG? You should get a single file, MPEG2.mpg. If you use one of the presets whose name begins with MPEG2 (interlaced preset who is not progressive), then you will get two files, the video file and a file of information m2t.xmlses. Nothing to do with the xml file. All you want is the video file that will be MPEG2.m2t.

  Right now I'd take that video in Handbrake for 1920 x 1080p29.97, like H.264.mp4, import this file in Premiere Elements, export as a AVCHD.mp4 MP4 H.264 1920 x 1080 p 30, get a core file line with default transmission speeds and, if necessary, start to lower the bitrate to 8 Mbit / s by looking at the quality.

  Please consider.

  Thank you.

  RTA

  Add on... If you need a how tos tos for handbrake, let me know. It is quick and easy with the adjustment under video tab key.

• Captivate 7 starts no problem with a temporary file

  Hello. It seems that I'm not the only one having a problem when you try to launch Captivate (7) (7, 64-bit) Windows. See other thread here: https://forums.adobe.com/message/5916670#5916670

  Captivate used to launch without a hitch. Then I took a break in the program for a few months (could also have downloaded some Captivate 7 about Add-ons then too: App Packager, Quiz results Analyzer, reviewer).

  Now when I try to open the program, my antivirus AVG says that one automatically generated "CP" file in user > AppData > Local > Temp folder has a 'unknown' moderate risk and should be removed. After that she did this, the Captivate launch window remains suspended until a dialog box asking if I want to force close.

  If I scan with AVG Temp folder, he found no threat. I also scanned it with a Microsoft tool that has found no threat.

  The file which seems to cause the problem seems to be generated at the time of the launch (so need the temporary Captivate file for the session, which would be naturally stored in Temp).

  I can assume there is a compatibility problem with an update of the Windows 7 system. If everyone in the world with Windows 7 and 7 Captivate now has this problem, we can probably assume that this question.

  I tried uninstalling and reinstalling Captivate (after ask Adobe if it would be ok, because I can not open the program to disable the first license). - But still have a problem after a new installation CD.

  The Adobe Captivate team - is anyone following this topic? Comments would be appreciated because I don't know what to do next and need support.

  @ Erik Lord, thank you, but it was not a question of AVG.

  In the case where others facing this problem, I will describe my experience.

  I had already tested the Captivate launch with the Temp folder excluded in AVG anti-virus (which is not ideal, because other viruses could find themselves there and not projected). That did not work. AVG has always presented the message.

  I tried to temporarily disable all AVG (right click on icon in the toolbar View menu for this). That did not work. The program just hung.

  A beautiful Adobe technical person remotely took control of my computer to make a diagnosis.

  At the end of the day, it deleted all of my fonts (except system fonts that would not remove) and the program successfully launched after that. (I had installed recently many new policies - as well as brushes Photoshop, actions & bosses. Interestingly, the PS had been much slower to boot, which I thought was due to the new 'active', but I had not considered loading in Captivate fonts, as they would in most all other programs. It turns out that at least one of them had corrupted code.)

  Unfortunately, I still have a small problem, but it is manageable until I have to remember Adobe. The Tech support guy had an account administrator to troubleshoot issues where Captivate launches beautifully. After I removed this connection (at startup) and just use my normal user account, Captivate has got the same message error AVG - but this time, not with the launch but a minute or so later. Also, when I said AVG to fix the problem, Captivate is not stopped and I could continue to work in it as usual. I would say that I need to go back and look at the fonts that were left, but at least it's type of work at the moment. This will not mark as resolved immediately in case there is more to add soon.

• Problem with Indesign interactive files.

  http://www.fresnoskiclub.com/pdf_files/tracks_0412.PDF

  I just run in a new issue with Indesign interactive files.
  I made an interactive magazine for a client for one year.
  I downloaded a PDF question.
  Then when I went online to open the acrobat reader file gave an error that the file is not loading properly because the file was "complicated".

  The file works correctly with Pro and the hard disk drive.

  
  I uninstalled Acrobat Reader on the PC and the file online now opens correctly very well.
  But my client users have the same problem on the opening of the file online. Is there a new glitch in the online reader?

  Any ideas?

  Crisssymarie

  You could start by posting the question on Acrobat forums.

• Problems with external javascript file

  For some reason, I can't get a text external/javascript [.js] file works correctly on my Web page. I went to Adobe Help Viewer and follow the instructions clearly. But it all comes to a cause I can't seem to see a little icon in fashion design javascript to connect my widget external javascript to support javascript on my page. Why is this? I have the visual aid invisible items checked as well. Here is an article of the code below.

  Rufus65 wrote:
  > I'm sorry, I went from one problem to another, the first problem with the
  > javascript shield was my main problem and the first and its fixed. now, it's a new
  > problem, but I think I can just cut this time around, I got the codes mutilated
  > of this site: http://www.widgetbox.com/#. it allows you to customize your own
  > widgets and I thought that it was legitimate, apparently is not. to solve my javascript
  > problem, basically I want to just a website that has downloadable widgets for me
  > to insert into my website using dreamweaver CS3. That is my main task, I was
  > trying to accomplish. I started 5 steps before this goal which was not brilliant
  > at all. So my main problem [outside my other topic post on my screwed upward
  [> header] is just to get legitimate widgets that are free and easy to use in
  > dreamweaver CS3, cause I don't have time to learn Javascript code or whatever it is
  > close to him.

  Depends on which widgets you want and what you need to make them specifically for you. Maybe start a new thread, listing widgets that you feel you need and what you want to do with them.

  You do not have available in the Insert bar Spry widgets, but they can or may not be able to accomplish some of the things you like to do, be specific about what you want to do on your end, and what you want the end result to be. Send examples if you have.

  Many widgets will require some, if not encoding extended, to get the best out of them. For example, widgets to http://ui.jquery.com/ can do something relatively well, but in Dreamweaver CS3, you need to enter the code to be able to set a lot of options.

  Where it's important, DWCS4 added a "web widgets" option that allows you to install widgets from the Exchange:
  http://www.Adobe.com/cfusion/exchange/index.cfm?s=5&from=1&o=desc&cat=290&l=-1&event=Produ ctHome & exc = 3

  But even once, they may need a little digging intot he code to get the best of them.

  HTH

  --
  Danilo Micen
  | http://blog.Extensioneering.com/
  | Extensioneer WebAssist
  | Adobe Community Expert

• Problem with the RTEXE file on PXI system

  I have attached the image of the comic to a very simple code that illustrates a problem with a file RTEXE on PXI system.

  If the VI (LabVIEW 2011) is started on the target of the RT of a LabVIEW project, no problem.

  If the code (with the shared variable linked to a typedef of indicator I32, lvlib being on target and ctl files) is compiled and run in starting my PXI system, it does not (message = "bad state" or something equivalent in french)!

  But when the shared variable is disconnected the typedef, the RTEXE file runs correctly in starting...

  No explanation for this strange behavior?

  A way to execute a RTEXE file on a PXI controller with shared variables typedefs?

  Thanx & BR,

  HL

  I have an answer on the french section of the forum: it's a LabView2011 bug, fixed in LabVIEW2012.

  LabVIEW2011 the only solution is to disconnect the shared variable the typedef

  Kind regards

  HL

• Problems with IMAQ write file.vi

  Hello, I am new to the community, and I have some problems with a Labview program, I received from a colleague. The program is written in Labview 8.6 and control (Guppy 160 b & w) camera and one-step translation. The camera is supposed to take 2 pictures in grayscale when the scene is in a certain position. Bmp images are safed using IMAQ writeFile.vi. For the configuration of my colleagues, it worked, but I get the following error message:

  "Error 1074396080 occurred to IMAQ Write queue.

  Possible reasons:

  IMAQ Vision: Invalid Image Type (Hex 0xBFF60450). »

  and the files that are written are empty.

  There is also no information using Labview extended regarding the IMAQ writeFile.vi. I found IMAQ 2.vi writeFile, but use it I get the same error as before. I don't know what to do. Can someone help me? Thank you in advance!

  Lemarié

  PS: You'll find an overview of the program (with the writeFile 2.vi IMAQ) in the attachment.

  see this