Problems with external javascript file

Similar Questions

• Are there any known problems with external battery for iPhone 6 s karim?

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested in what Apple says rather than what says karim.

  Thank you.

  Jkim99 wrote:

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested what said Apple rather than what it says karim.

  Thank you.

  There is no Apple here in this technical forum from user to user.

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF

• External javascript file in the page login.html Campus Mobile

  Hello

  
  

  We try to load an external javascript file of Mobile Campus of Oracle application login.html page.  The code works in the Android app, but not the IOS app.  Here is a code snippet:

  Can you offer any help on how we can get the javascript code to load correctly for iOS?  The code is not local to the application is because we're going to make changes so that it displays various messages on the login page at different points throughout the year.

  Thanks for any help you can provide!

  Just wanted to give everyone an update and let you know that we have understood the question.

  in the file Application.xml - MAF, we added our URL to the white list (Security tab).  This allowed the application to invoke successfully the javascript code for the external file.  I hope it is useful to someone, as it seems to help others / Oracle support on this forum is unlikely.

• problems with. ARW files and invigorating auto

  problems with. ARW files and invigorating auto

  I'll try to explain this, because this has happened in past and never found a way to solve, but I lived with it

  now that I have a Sony A7R the problem is more serious

  First I'm proud he realize the image in camera, I use DRO lvl 5 to get enough light, as when I'm shooting at dusk. DRO desire to do HDR but in a single file, it lightens the dark colors. in my camera, I'm happy with the results

  but when I download on lightroom, they come out almost black.

  Let me explain

  Let's say I have import 100 images

  I'll double check my preferences and everything is turned OFF when you want to import options, there is no auto toning, nothing.

  import the images I see glimpses in miniature that looks very good.

  I double click on one to enlarge, we go out so grid view.

  for a short 1 or 2 seconds, I see the full image in all its glory but that lightroom is doing something funny, it darkens the image

  an as she inspects every image, it was a DRO picture, it's too dark.

  to make this clear, the image is perfect, as it was in the beginning but after a few seconds, lightroom for some reason some think should be corrected.

  How we prevent lightroom to do this, I want the image exactly as it is, why lightroom must apply a correction >?

  I think we should do something with the interpretation of the raw file and lightroom applies its own algorithm.

  but here is what I get... until lightroom makes the change that I am able to testify the image exactly as he took and want unchanged...

  now, I have to edit each file or find a profile to which is added the work.

  any ideas how to prevent the ruin my lightroom images and just leave them as they were during the first time...

  There are 2 phases... it is when it imports initially and they look very well

  second are analysis each image and application of some type of toning that it darkens too.

  Thanks for the help

  Sorry, it's the yahoo email auto-reply message.

  I've now disabled

  thing is, there is no DRO jpg to download from the camera

  his only ARW. so my understanding is when I use the DRO setting, the camera makes changes to the ARW lightroom this bed somehow the ARW.

  but he comes back and unfortunately no DRO setting.

  because I noticed that if I take a normal image in his dark raw mode but if I apply dro to it, it comes out more bright, yet when I d/l the camera image in lightroom, which is an ARW - there no jpg files. Lightroom decides to BUMBLE

  So actually there is no interest to use DRO because when I download lightroom deletes.

  is there a way to tell lightroom to preserve the jpg preview as seen first.

  his right blade, image appears perfect... that lightroom do something, that bam, its ruin.

  What should I do to prevent ruin the image of lightroom? If it was good in the first place.

• page element to reference in the external JavaScript file

  Hello
  
  Anyone know how I can refer to page within an "external JavaScript file elements?" Things such as $v ('P3_ITEM1') and & P3_ITEM1. works great if I put the JavaScript code directly in the page header - section of JavaScript. For ease of maintenance, I want to move these JavaScript codes in the external file on the server. I tried the two $v ('P3_ITEM1') and & P3_ITEM1. and they do not work in the external JavaScript file - 4.1.0.00.32 apex.
  
  Thank you.
  
  Andy

  Andy,

  Something like this should work. You should not add pAppID or pSession as parameter, if they will always be entries on the page.

  APP_ID: $v('pFlowId')
  SESSION: $v('pInstance') 
  

  and make sure that all substitution strings are replaced.
  >
  var ajaxRequest = new htmldb_Get (null, & APP_ID, 'APPLICATION_PROCESS =?', 0);
  >

  Kind regards
  Janet Tyson

• Problems with the audit files!

  Hi friends,
  
  We are facing a problem with the audit files we have a runnning on oracle 10g server and being an Institute of teaching many ppl to connect to the server and too much work with SQL and PL/SQL. We have disabled the option to audit the database, but the audit files grow enormous in size. May I know what can be the problem and how to fix that there could be something that we would have missed.
  
  Kind regards
  Maury

  There is no setting of "verification". Display the values of

  AUDIT_FILE_DEST, AUDIT_SYS_OPERATIONS, AUDIT_TRAIL.

  I don't know 'NULL' as the value for each of these parameters.

  Werner

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.

• Ver El Capitan 10.11.6 - problems with external display

  I've updated my Macbook Air to the latest version of El Capitan (ver.10.11.6), and since then, I had problems with my external monitor: image is thus largest, out of proportion, and I can't seem to be able to set the zoom out or by using the display options. That's all just terrible to work with her. It is not my monitor because I never change its configurations, and there is nobody else who has access, and the problem started after I updated to version 10.11.6

  Any help will be appreciated!

  How do you connect the monitor?

  Mirroring your screen or to help us address display?

  What is the native resolution of your screen?

• Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

  Hi all

  Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

  Here are the specs:

  1 Macbook Air 11.5 "running on El Capitan (10.11.1)

  2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

  Before the accident yesterday, it was working OK.

  Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

  I can assemble and disassemble a USB stick very well.

  Any help would be appreciated.

  Thank you!

  Maybe you can explain a little better.

  I would like to make some general comments before having your replay.

  It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

  For TM, the rule is that the drive is about 3 times the size of the boot disk.

  Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

  I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

  Have another drive formatted NTFS for Windows.

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Problem with the RTEXE file on PXI system

  I have attached the image of the comic to a very simple code that illustrates a problem with a file RTEXE on PXI system.

  If the VI (LabVIEW 2011) is started on the target of the RT of a LabVIEW project, no problem.

  If the code (with the shared variable linked to a typedef of indicator I32, lvlib being on target and ctl files) is compiled and run in starting my PXI system, it does not (message = "bad state" or something equivalent in french)!

  But when the shared variable is disconnected the typedef, the RTEXE file runs correctly in starting...

  No explanation for this strange behavior?

  A way to execute a RTEXE file on a PXI controller with shared variables typedefs?

  Thanx & BR,

  HL

  I have an answer on the french section of the forum: it's a LabView2011 bug, fixed in LabVIEW2012.

  LabVIEW2011 the only solution is to disconnect the shared variable the typedef

  Kind regards

  HL

• Problems with IMAQ write file.vi

  Hello, I am new to the community, and I have some problems with a Labview program, I received from a colleague. The program is written in Labview 8.6 and control (Guppy 160 b & w) camera and one-step translation. The camera is supposed to take 2 pictures in grayscale when the scene is in a certain position. Bmp images are safed using IMAQ writeFile.vi. For the configuration of my colleagues, it worked, but I get the following error message:

  "Error 1074396080 occurred to IMAQ Write queue.

  Possible reasons:

  IMAQ Vision: Invalid Image Type (Hex 0xBFF60450). »

  and the files that are written are empty.

  There is also no information using Labview extended regarding the IMAQ writeFile.vi. I found IMAQ 2.vi writeFile, but use it I get the same error as before. I don't know what to do. Can someone help me? Thank you in advance!

  Lemarié

  PS: You'll find an overview of the program (with the writeFile 2.vi IMAQ) in the attachment.

  see this