SQL parallel data loads

Similar Questions

• SQL * sequential data Loader in the treatment Record file?

  If I use the will of classic way SQL * Loader process a data file in the order from top to bottom?  I have a file with header and the detail records without value found in the detail records that can be used to connect to the header records.  The only option is to derive a header value via a sequence (nextval) and then fill in the detail records with the same value from the same sequence (currval).  But to do SQL * Loader should treat the file in the exact order that the data has been written to the data file.  I read through the 11 g Oracle® database utilities SQL * Loader sections looking for evidence that this is what's going to happen, but have not found this information and I don't want to assume that SQL * Loader will always process the data file records in order.
  

  Thank you

  Support of Oracle responded with the following statement.

  "Yes, SQL * LOADER file data from top down process."
  This has been affected in the note below:

  "SQL * Loader - how to load a single logical record physical records line breaks include (Doc ID 160093.1).

  Jason

• ODI - SQL for Hyperion Essbase data loading

  Hello

  We have created a 'vision' in SQL Server that contains our data.  The view currently has every year and periods of Jan 2011 to present.  Each period is about 300 000 records.  I want to only load one period at a time.  For example may 2013.  Currently we use ODBC through a rule of data loading, but the customer wants to use ODI to be compatible with the versions of dimension metadata.  Here's the SQL on the view that works very well.   Is there a way I can run this SQL in the ODI Interface so it pulls only what I declare in the Where clause?  If yes where can I do it?

  Select

  CATEGORY, YEAR, LOCATION, SCRIPT, DEPT, PROJECT, EXPCODE, TIME, ACCOUNT, AMOUNT

  Of

  PS_LHI_HYP_PRJ_ACT

  Where

  YEAR > = "2013" AND PERIOD = 'MAY '.

  ORDER BY CATEGORY ASC ASC FISCAL_YEAR, LOCATION ASC, ASC, ASC, ASC, ASC, PERIOD EXPCODE PROJECT DEPT SCENARIO CSA ACCOUNT CSA;

  Hello

  Simply use the following KM to load data - IKM SQL for Hyperion Essbase (DATA) - in an ODI interface that has the view that you created the Source model. You can add filters to the source which are dynamically by ODI variables to create the Where clause based on the month and year. Make sure you only specify a rule of load method to load the data into the KM

• SEVERE: Exception initialization 'oracle.dbtools.crest.fcp.DataModelerAddin' extension ' Oracle SQL Developer Data Modeling

  After some testing today with a new installation and plugin subversion in the latest edition of data Modeler this error happens with every start of the tool.

  Have removed and unzipped the installation once again without changing the error.

  After that, I started with another user on my computer, it the error does not occur.

  Is there a system folder to remove the configuration of my personal like jdeveloper and sql developer?

  I lose the most important features, for example. have no browser and cannot open a design.

  Here is the full error stack:

  29 may 2015 22:17:40 oracle.ideimpl.extension.AddinManagerImpl

  SEVERE: Exception initialization 'oracle.dbtools.crest.fcp.DataModelerAddin' extension ' Oracle SQL Developer Data Modeling

  java.lang.NullPointerException

  at oracle.dbtools.crest.swingui.editor.UDPLibrariesPersistence.load(UDPLibrariesPersistence.java:220)

  at oracle.dbtools.crest.model.design.DesignSet.createElement(DesignSet.java:56)

  at oracle.dbtools.crest.swingui.ApplicationView.addDesign(ApplicationView.java:2497)

  to oracle.dbtools.crest.swingui.ApplicationView. < init > (ApplicationView.java:435)

  to oracle.dbtools.crest.swingui.ApplicationView. < init > (ApplicationView.java:389)

  at oracle.dbtools.crest.swingui.ApplicationView.getInstance(ApplicationView.java:2258)

  at oracle.dbtools.crest.fcp.DataModelerAddin.initialize(DataModelerAddin.java:553)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:496)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:483)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManagerImpl.java:299)

  at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:160)

  at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:143)

  at oracle.ide.IdeCore.initProductAndUserAddinsAndActionRegistry(IdeCore.java:2294)

  at oracle.ide.IdeCore.startupImpl(IdeCore.java:1817)

  at oracle.ide.Ide.startup(Ide.java:772)

  at oracle.ide.osgi.Activator.start(Activator.java:209)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run(BundleContextImpl.java:711)

  at java.security.AccessController.doPrivileged (Native Method)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683)

  at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:381)

  at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:390)

  at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1176)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:559)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:544)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:457)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:243)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.internalStart(EquinoxLauncher.java:271)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.start(EquinoxLauncher.java:241)

  at org.eclipse.osgi.launch.Equinox.start(Equinox.java:258)

  at org.netbeans.core.netigso.Netigso.start(Netigso.java:191)

  at org.netbeans.NetigsoHandle.startFramework(NetigsoHandle.java:209)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1352)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1156)

  at org.netbeans.core.startup.ModuleList.installNew (ModuleList.java:340)

  at org.netbeans.core.startup.ModuleList.trigger (ModuleList.java:276)

  at org.netbeans.core.startup.ModuleSystem.restore (ModuleSystem.java:301)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:181)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:150)

  at org.netbeans.core.startup.Main.start (Main.java:307)

  at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:123)

  at java.lang.Thread.run(Thread.java:745)

  Hi Torsten,

  Thanks for reporting the problem. I logged a bug.

  You can view together as "list of system types" directory to "preference > Data Modeler"-probably no longer exists. I guess that the setting for this directory is empty when you start SQL Dev as a different user.

  Philippe

• FDMEE of planning data loaded successfully but not able to see the data in Planning - export of fish shows in FDMEE

  Hi all

  We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

  In the processes log, I can see her mentioned data loaded in the Cube. Please advise on this.

  Thank you

  Roshi

  Two things:

  -I wasn't talking about method you import data but export data. You use the SQL method. Go to target Applications, select your application of planning/essbase, and set load method as a file. Memorize your settings

  2014-06-19 12:26:50, 692 [AIF] INFO: rules properly locked the file AIF0028

  2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube by launching the rules file...

  2014-06-19 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...

  2014-06-19 12:26:50, 801 [AIF] INFO: the data has been loaded by the rules file.

  2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file

  2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file

  -Then export again and review. DAT file in the Outbox folder. Is it empty?

  -You need to add a new dimension to your import format (Dimension add > currency). Then add Local as expression

  -Import, validate and export data

• limiting number of column in the 4.1 apex data loader?

  Hi all!
  
  Is there a limit on the number of column in the APEX 4.1 data loading page?
  
  My DB object has 59 columns and they are all available in single colum drop of my load sample data table definition boxes.
  On page two of the wizard created database load pages "data/table mapping" columns only 45 is indicated. These columns are correctly inserted in my table. The last 14 columns are ignored.
  
  If anyone knows if there is a limitation and can it be extended?
  
  Thanks for any reply and cordially
  Kai

  No, I don't have a solution for this.

  Split the file within columns each, with the primary key that is repeated and then sting tables up to post upload could be easier than to use other roads.

  And then there's always the good old SQL Loader and external Tables. But the integration of these into the Apex is not easy because Apex runs on the server and the file is usually the disk of HARD local to the client.

  Kind regards

• optimization of data load

  Hi all
  
  I need to create a file data source to optimize costs in essbase.
  Is someone can you please tell me if the following data source is optimized.
  
  "Spr1" "Den1' '2' 'Spr3" "Spr4" "Spr5' 11 12
  "Spr5" 13 14
  "Spr5' 15 16
  "Spr4' 10 20 ' Spr5"
  
  "Spr1" "Den1' '2' 'Spr3" "Spr4" "Spr5' 11 12
  "Spr5" 13 14
  "Spr5' 15 16
  "Spr4' 10 20 ' Spr5"

  Here are some tips to optimize the loading of the data:

  1 take the scattered in the same dimensions that outline
  2 sort the data records to exploit the combination of scattered members
  3 préagréger prior to loading
  4. place dense fields to the right (nearest data)
  5. use a dense dimension for the data column header
  6. use the function to export Essbase (columns format)
  7 avoid unnecessary data fields in the data source
  8 replace the zeros with #MISSING in the State of loading of data
  9. data load client vs Server
  10. set the parallel of Essbase.cfg loading

• Data loading utility

  Can we access or create the data loading utility within our application (the same one to which we can access by tab utilities?

  N °

  Do a search of the forum before posting. Several technical data loading have been described previously, like writing a parser in PL/SQL, or using external tables.

• Newbie sorry data-load question and datafile / viral measure

  Hi guys
  
  Sorry disturbing you - but I did a lot of reading and am still confused.
  
  I was asked to create a new tablespace:
  
  create tablespace xyz datafile 'oradata/corpdata/xyz.dbf' size 2048M extent management local size unique 1023M;
  
  alter tablespace xyz add datafile ' / oradata/corpdata/xyz.dbf' size 2048M;
  
  Despite being worried not given information about the data to load or why the tablespace must be sized that way - I was told to just 'do it '.
  
  Someone tried to load data - and there was a message in the alerts log.
  
  ORA-1652: unable to extend temp by 65472 segment in tablespace xyz
  
  We do not use autoextend on data files even if the person loading the data would be so (they are new on the environment).
  
  The database is on a cold backup nightly routine - we are in a rock anvil - we have no space on the server - to make RMAN and only 10 G left on the Strip for (Veritas) backup routine and thus control space with no autoextend management.
  
  As far as I know of the above error message is that the storage space is not large enough to hold the load data - but I was told by the person who imports the data they have it correctly dimensioned and it something I did when the database create order (although I have cut and pasted from their instructions - and I adapted to our environment - Windows 2003 SP2 but 32 bits).
  
  The person called to say I had messed up their data loading and was about to make me their manager for failing to do my job - and they did and my line manager said that I failed to correctly create the tablespace.
  
  When this person was asked to create the tablespace I asked why they thought that extensions should be 1023M and said it was a large data load that must be inserted to a certain extent.
  
  That sounds good... but I'm confused.
  
  1023M is very much - this means that you have only four extents in the tablespace until it reaches capacity.
  
  It is a load - is GIS data - I have not participated in the previous data loads GIS - other than monitor and change of tablespaces to support - and previous people have size it right - and I've never had no return. Guess I'm a bit lazy - just did as they asked.
  
  However, they never used 128K as a size measure never 1023M.
  
  Can I ask is 1023 M normal for large data loads - or I'm just the question - it seems excessive unless you really just a table and an index of 1023M?
  
  Thanks for any idea or other research.

  Assuming a block size of 8 KB, 65472 would be 511 MB. However, as it is a GIS database, my guess is that the database block size itself has been set to 16K, then 65472 is 1023MB.

  What load data is done? Oracle Export dump? Which includes a CREATE INDEX statement?
  Export-Import is a CREATE TABLE and INSERT so that you would get an ORA-1652 on it. So you get ORA-1652 if the array is created.
  However, you will get an ORA-1652 on an INDEX to CREATE the target segment (ie the Index) for this operation is initially created as a 'temporary' segment until the Index build is complete when it switches to be a 'temporary' to be a segment of "index".

  Also, if parallelism is used, each parallel operation would attempt to assign degrees of 1023 MB. Therefore, even if the final index target should have been only, say 512 MB, a CREATE INDEX with a DEGREE of 4 would begin with 4 extensions of 1023 MB each and would not decrease to less than that!

  A measure of 1023 MB size is, in my opinion, very bad. My guess is that they came up with an estimate of the size of the table and thought that the table should be inserted in 1 measure and, therefore, specified 1023 MB in the script that is provided to you. And it is wrong.

  Same Oracle AUTOALLOCATE goes only up to 64 MB extended when a Segment reached the mark of 1 GB.

• How to set sql server date has time format

  Dear Sir.

  I used the windows 7 operating system.

  I have work on scada software to explore siemens wincc.

  I develop the report based on sql server work.

  but the problem is when I put my system date in DDMMYYYY format, so my data was not stored in sql server.

  but when

  I put my system date in YYYYMMDD format, then my data stored in sql server.

  so, how to change the date format sql server.

  I am attaching screenshot (it is a red box, so this date format, I held DDMMYYYY)

  Please give solution.

  

  Abhijit Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you have a question setting SQL server date time format. When you try to set the system date format id ddmmy, the data are not stored in SQL server on the system.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  https://social.technet.Microsoft.com/search/en-us/TechNet?query=SQL%20server&beta=0&AC=4#refinementChanges=129&PageNumber=1&showMore=false

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• By using the Service Push SQL Server data push?

  Hello

  We will implement a Blackberry, a Blackberry application that retrieves data from a SQL Server data source. In fact, there will be a web application where users will enter into data (SQL Server) and the BlackBerry user should see the data at the end of each day's work with his BB app on the go. I suppose we must apply a solution of "push technology". The problem is that we do not have a BES. Is it possible to implement a solution without BES, using 'Push the Service'?

  Best regards

  burakk

  No problem. Registration for BIS Eval, test your push button and then you can put in production. Be aware however that PUSH does not work in the simulator of debugging can be a bit of a pain...

• Forcing errors when loading essbase nonleaf data loading

  Hi all

  I was wondering if anyone had experience forcing data load errors when loadrules is trying to push the nonleaf members data in an essbase cube.

  I obviously ETL level to prevent members to achieve State of charge which are no sheet of error handling, but I would however like the management of the additional errors (so not only fix the errors).

  ID much prefer errors to be rejected and shown in the log, rather than being crushed by aggregation in the background

  Have you tried to create a security filter for the user used by the load that allows only write at level 0 and not greater access?

• Data loading convert timestamp

  I use APEX 5.0 and download data wizard allows to transfer data from excel.

  I define Update_Date as timestamp (2) and the data in Excel is 2015/06/30 12:21:57

  NLS_TIMESTAMP_FORMAT is HH12:MI:SSXFF AM JJ/MM/RR

  I created the rule of transformation for update_date in the body of the function, plsql as below

  declare

  l_input_from_csv varchar2 (25): = to_char(:update_date, 'MM/DD/YYYY HH12:MI:SS AM');

  l_date timestamp;

  Start

  l_date: = to_timestamp (l_input_from_csv, ' MM/DD/YYYY HH12:MI: SS AM' ");

  Return l_date;

  end;

  I keep having error of transformation rule.  If I do create a transformation rule, it will ask for invalid month.

  Please help me to fix this.

  Thank you very much in advance!

  Hi DorothySG,

  DorothySG wrote:

  Please test on demand delivery data loading

  I stick a few examples to the Instruction of Page, you can use copy and paste function, it will give the same result

  Please change a coma separator ',' on the other will be message "do not load".

  Check your Application 21919. I changed the rule of transformation:

  

  Data is loading properly.

  Kind regards

  Kiran

• Move rejected records to a table during a data load

  Hi all

  When I run my interfaces sometimes I get errors caused by "invalid records. I mean, some contents of field is not valid.

  Then I would move these invalid to another table records, while the data loading lights in order not to interrupt the loading of data.

  How can I do? There are examples that I could follow?

  Thanks in advance

  concerning

  Hi Alvaro,

  Here you can find different ways to achieve this goal and choose according to your requirement:

  https://community.Oracle.com/thread/3764279?SR=Inbox

• Data loading Wizzard

  On Oracle Apex, is there a feasibility study to change the default feature

  1. can we convert the load data Wizard just insert to insert / update functionality based on the table of the source?

  2. possibility of Validation - Count of Records < target table is true, then the user should get a choice to continue with insert / cancel the data loading process.

  I use APEX 5.0

  Need it please advice on this 2 points

  Hi Sudhir,

  I'll answer your questions below:

  (1) Yes, loading data can be inserted/updated updated

  It's the default behavior, if you choose the right-hand columns in order to detect duplicate records, you will be able to see the records that are new and those who are up to date.

  (2) it will be a little tricky, but you can get by using the underlying collection. Loading data uses several collections to perform the operations, and on the first step, load us all the records of the user in the collection "CLOB_CONTENT". by checking this against the number of records in the underlying table, you can easily add a new validation before moving on to step 1 - step 2.

  Kind regards

  Patrick