Data loading utility

Similar Questions

• Failed to load data using the contour load utility

  I am unable to load data using contour utility charge.
  Assigned data loading dimension such as: account
  Driver-Dimension such as: period
  Member as a pilot: Jan
  
  Connection file:
  
  Account, Jan, Point of view, the name of Cube data loading
  Investment, 1234, "India, current, heck, FY13", Plan1
  
  
  Utility of contour control
  OutlineLoad A:pract U:admin /I:C:\test1.csv /D:Account /L:C:\lg.log /X:C:\ex.exc
  
  
  Exception file
  
  [Thu Mar 28 18:05:39 GMT + 05:30 2013] Error loading of data record 1: investments, 1234, '' ' India, common, project, FY14' ' ', Plan1
  [Thu Mar 28 18:05:39 GMT + 05:30 2013] com.hyperion.planning.InvalidMemberException: Member India, common, rough, FY14 does not exist or you do not have access to it.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Planning of vector data store processes loaded with exceptions: exceptions have occurred, examine the file exception for more information. 1 data record has been read 1 record of data have been processed, 0 were loaded successfully, 1 was rejected.
  
  
  Log file:
  
  
  Connected application "Rlap", liberation 11.113, adapter Interface Version 5, supported and not enabled workforce, CapEx no taken care and not active, CSS Version 3
  [Thu Mar 28 18:05:38 GMT + 05:30 2013] Input file located and opened successfully "C:\load.csv".
  [Thu Mar 28 18:05:38 GMT + 05:30 2013] Record header fields: account, Jan, Point of view, the name of Cube data loading
  [Thu Mar 28 18:05:38 GMT + 05:30 2013] Located by using 'Account' dimension and for the loading of data into the application 'Rlap.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Loading dimension 'Account' has been successfully opened.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] A refresh of the cube operation will not be run.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Create filters for safe operation will not be performed.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Look at the files of newspapers of Essbase to status if Essbase data have been loaded.
  [Thu Mar 28 18:05:40 GMT + 05:30 2013] Planning of vector data store processes loaded with exceptions: exceptions have occurred, examine the file exception for more information. 1 data record has been read 1 record of data have been processed, 0 were loaded successfully, 1 was rejected.
  
  
  
  Infact members exist in outline.
  Any help would be appreciated.

  can you double check your csv file, open it in a text editor, because the error is showing additional citations.

  [Thu Mar 28 18:05:39 GMT + 05:30 2013] Error loading of data record 1: investments, 1234, '' ' India, common, project, FY14' ' ', Plan1

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 11.1.2.3 - data loading planning?

  Hello

  Another question from newbie - beginner to 11.1.2.3 for which generous points are once more available; I checked the manuals for 11.1.2.3. but do not believe they have removed this feature available in earlier versions of the planning, can someone confirm please?

  In the previous version of the planning (10.x) he used to be a GUI tool based which facilitated the data and mapping the data transformations for easy loading of data in Hyperion Planning without using a tool such as the ODI via flat files or table of database (no disorders, built around Hyperion 'API') from other sources.

  Is it equivalent to 11.1.2.3. and if so someone can tell me the navigation path please?

  As said I have reviewed manuals and as said I don't think I'm following = > load utility contour, FDM Data Integrator adapter, architect of Management Performance.

  But it may be "planning hierarchical Load", can anyone confirm if this is the case (the manual is sketchy to say the least) and if so provide path navigation or even better, a link to a simple example...

  n. b. I keep loads of metadata (members, properties members, parent / child et al) and balance data (balances in cubes loading).

  If it isn't available in Hyperion Planning the form I describe there is no reason NOT to apply the rules of loading EAS to manage data and load balances?

  Thank you very much

  Robert.

  You could try to launch the Foundation > configure the web server option in the Configurator of the EMP.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Data loading options

  Hi all
  
  Are there any other options other than SQL * tables LDR & external to load external data into ORCL?
  
  Thank you
  Rod.

  SamFisher wrote:
  Hi all

  Are there any other options other than SQL * tables of LDR & external to load external data into ORCL?

  Thank you
  Rod.

  There are many ways to read the data.

  SQL * Loader is an external command line utility
  Outdoor tables is an internal mechanism than using the same "engine" as the SQL * Loader utility, to be able to read the data as if it was on a table already (this is why it can be used through SQL).
  You can also use the UTL_FILE package to read files line-wise or as a mechanism of low level bytes.
  Also, methods such as reading of BFILE as evidenced by... ( goes off to find an example )... here:

  {message: id = 9732075}

  There are also other built in packages that contain functions or procedures that offer a form of file reading and writing.
  And you can also create your own by using Java in the database.

  Then, take your pick... many choices... and everything depends on what you want to do.

• contour load utility

  Hi, I am trying to build dimensions using contour load utility, but the problem is that I am not able to load the file when I give the types of plans as a header and if I dnt give them then members is reflected in all types of diet, my file size is
  "SUB-ACCOUNT", 'Parent', 'Description', "' aka: default ', 'Data Type', 'Memory', 'Source Plan Type', ' Plan Type (Plan1) ',' Plan Type (Plan2) ', 'Plan Type (plane3)'"
  04 "t", "Sub", 'PROJECTS (CAPITAL/RECHARGEBLE)', 'PROJECTS (CAPITAL/RECHARGEBLE)', 'Never share', "Plan1", 1, 1, 0
  0, 04 "t", "NONE", "NONE", "Never share", "Plan1", 1, 1, 0
  
  the error it shows is
  "Column not recognized"Sourrce Plan Type"header value
  "Unrecognized column header value 'Plan Type (Plan1)'
  "Unrecognized column header value 'Plan Type (Plan2)'
  "Unrecognized column header value 'Plan Type (plane3)'
  
  I copied the header from the pdf hp_admin file formats, but I can't understand why these header properties are creating problem

  >

  "SUB-ACCOUNT", 'Parent', 'Description', "' aka: default ', 'Data Type', 'Memory', 'Source Plan Type', ' Plan Type (Plan1) ',' Plan Type (Plan2) ', 'Plan Type (plane3)'"

  It seems to be OK,

  However,.

  "Column not recognized"Sourrce Plan Type"header value

  (1) it must be 'Source Plan Type'

  "Unrecognized column header value 'Plan Type (Plan1)'
  "Unrecognized column header value 'Plan Type (Plan2)'
  "Unrecognized column header value 'Plan Type (plane3)'

  (2) ' spirit Type of plan (Plan 1)' the space between the Type and (Plan 1) same thing applies for the rest.

  See you soon...!

• import schema using the load utility

  Hi all
  
  I extracted my plan by using the generator of EPMA file and the file is a csv file. I am trying to load it using the load utility and I get this error message
  
  "Failed to get analytical information and or perform a data load: unknown to the header of column values.
  
  1st row in the Excel worksheet. Hierarchies = account
  Second row: Parent, child, data storage...
  
  I need to change this header...?

  You exported the hierarchy from an application of EPMA, is not in the same format required for the charger to contour and a classic application, the format is quite different.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Where is the load utility in bulk?

  Hello
  
  the document below is a reference to the load utility in bulk. I got the 9.1.0.2 packages (p8484010_9202 and p9070428_9102) I have not seen this utility as it has been mentioned in the literature: InstallServer/Xellerate/db/oracle/Utilities/oimbulkload
  
  Oracle® Identity Manager, reference tools communicated 9.1.0.2, E14763-02
  
  Bulk load utility
  Mass the load utility is intended to automate the process of loading a large amount of data in Oracle Identity Manager. It helps reduce downtime for loading data. You can use this utility, or immediately after the installation of Oracle Identity Manager, or at any time during the life of production of Oracle Identity Manager. The load utility mass can use CSV files or tables of database as a data source. Data imported into Oracle Identity Manager are automatically converted to IOM users or accounts for the users of the IOM.
  
  Did you ever get it?
  
  Thank you
  
  Renato.
  
  Published by: Renato.Guimaraes on 12/14/2009 09:00

  The oimbulkload file is in the folder of 'root' of zip file.

• Forcing errors when loading essbase nonleaf data loading

  Hi all

  I was wondering if anyone had experience forcing data load errors when loadrules is trying to push the nonleaf members data in an essbase cube.

  I obviously ETL level to prevent members to achieve State of charge which are no sheet of error handling, but I would however like the management of the additional errors (so not only fix the errors).

  ID much prefer errors to be rejected and shown in the log, rather than being crushed by aggregation in the background

  Have you tried to create a security filter for the user used by the load that allows only write at level 0 and not greater access?

• Data loading convert timestamp

  I use APEX 5.0 and download data wizard allows to transfer data from excel.

  I define Update_Date as timestamp (2) and the data in Excel is 2015/06/30 12:21:57

  NLS_TIMESTAMP_FORMAT is HH12:MI:SSXFF AM JJ/MM/RR

  I created the rule of transformation for update_date in the body of the function, plsql as below

  declare

  l_input_from_csv varchar2 (25): = to_char(:update_date, 'MM/DD/YYYY HH12:MI:SS AM');

  l_date timestamp;

  Start

  l_date: = to_timestamp (l_input_from_csv, ' MM/DD/YYYY HH12:MI: SS AM' ");

  Return l_date;

  end;

  I keep having error of transformation rule.  If I do create a transformation rule, it will ask for invalid month.

  Please help me to fix this.

  Thank you very much in advance!

  Hi DorothySG,

  DorothySG wrote:

  Please test on demand delivery data loading

  I stick a few examples to the Instruction of Page, you can use copy and paste function, it will give the same result

  Please change a coma separator ',' on the other will be message "do not load".

  Check your Application 21919. I changed the rule of transformation:

  

  Data is loading properly.

  Kind regards

  Kiran

• Move rejected records to a table during a data load

  Hi all

  When I run my interfaces sometimes I get errors caused by "invalid records. I mean, some contents of field is not valid.

  Then I would move these invalid to another table records, while the data loading lights in order not to interrupt the loading of data.

  How can I do? There are examples that I could follow?

  Thanks in advance

  concerning

  Hi Alvaro,

  Here you can find different ways to achieve this goal and choose according to your requirement:

  https://community.Oracle.com/thread/3764279?SR=Inbox

• Data loading Wizzard

  On Oracle Apex, is there a feasibility study to change the default feature

  1. can we convert the load data Wizard just insert to insert / update functionality based on the table of the source?

  2. possibility of Validation - Count of Records < target table is true, then the user should get a choice to continue with insert / cancel the data loading process.

  I use APEX 5.0

  Need it please advice on this 2 points

  Hi Sudhir,

  I'll answer your questions below:

  (1) Yes, loading data can be inserted/updated updated

  It's the default behavior, if you choose the right-hand columns in order to detect duplicate records, you will be able to see the records that are new and those who are up to date.

  (2) it will be a little tricky, but you can get by using the underlying collection. Loading data uses several collections to perform the operations, and on the first step, load us all the records of the user in the collection "CLOB_CONTENT". by checking this against the number of records in the underlying table, you can easily add a new validation before moving on to step 1 - step 2.

  Kind regards

  Patrick

• The data load has run in Odi but still some interfaces are running in the operator tab

  Hi Experts,

  I'm working on the customization of the olive TREE, we run the incremental load every day. Data loading is completed successfully, but the operator status icon tab showing some interfaces running.

  Could you please, what is the reason behind still running the interfaces tab of the operator. Thanks to Advance.your valuable suggestion is very useful.

  Kind regards

  REDA

  What we called stale session and can be removed with the restart of the agent.

  You can also manually clean session expired operator.

• Ignore the ASO - zero data loads and missing values

  Hello

  There is an option that ignores the zero values & the missing values in the dialog box when loading data in cube ASO interactively via EAS.

  Y at - it an option to specify the same in the MAXL Import data command? I couldn't find a technical reference.

  I have 12 months in the columns in the data flow. At least 1/4 of my data is zeros. Ignoring zeros keeps the size of the cube small and faster.

  We are on 11.1.2.2.

  Appreciate your thoughts.

  Thank you

  Ethan.

  The thing is that it's hidden in the command Alter Database (Aggregate Storage) , when you create the data loading buffer.  If you are not sure what a buffer for loading data, see loading data using pads.

• Data loading 10415 failed when you export data to Essbase EPMA app

  Hi Experts,

  Can someone help me solve this issue I am facing FDM 11.1.2.3

  I'm trying to export data to the application Essbase EPMA of FDM

  import and validate worked fine, but when I click on export its failure

  I am getting below error

  Failed to load data

  10415 - data loading errors

  Proceedings of Essbase API: [EssImport] threw code: 1003029 - 1003029

  Encountered in the spreadsheet file (C:\Oracle\Middleware\User_Projects\epmsystem1\EssbaseServer\essbaseserver1\app\Volv formatting

  I have Diemsion members

  1 account

  2 entity

  3 scenario

  4 year

  5. period

  6 regions

  7 products

  8 acquisitions

  9 Servicesline

  10 Functionalunit

  When I click on the button export its failure

  I checked 1 thing more inception. DAT file but this file is empty

  Thanks in advance

  Hello

  Even I was facing the similar problem

  In my case I am loading data to the Application of conventional planning. When all the dimension members are ignored in the mapping for the combination, you try to load the data, and when you click Export, you will get the same message. . DAT empty file is created

  You can check this

  Thank you

  Praveen

• FDMEE of planning data loaded successfully but not able to see the data in Planning - export of fish shows in FDMEE

  Hi all

  We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

  In the processes log, I can see her mentioned data loaded in the Cube. Please advise on this.

  Thank you

  Roshi

  Two things:

  -I wasn't talking about method you import data but export data. You use the SQL method. Go to target Applications, select your application of planning/essbase, and set load method as a file. Memorize your settings

  2014-06-19 12:26:50, 692 [AIF] INFO: rules properly locked the file AIF0028

  2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube by launching the rules file...

  2014-06-19 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...

  2014-06-19 12:26:50, 801 [AIF] INFO: the data has been loaded by the rules file.

  2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file

  2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file

  -Then export again and review. DAT file in the Outbox folder. Is it empty?

  -You need to add a new dimension to your import format (Dimension add > currency). Then add Local as expression

  -Import, validate and export data