SQL Server (disabling the Balooning pilot?)

Similar Questions

• New installation of SQL Server, disable the write cache?

  Hello, I'm under ESXi 5.1 and I need to configure a virtual machine Windows server 2012 for our first virtual SQL Server.  My database guy tells me that I have to disable the cache write for SQL best practices.  Is it always true when it is a virtual machine?  If it is true where would I turn it off?  To add a bit more info about our storage on a network SAN Dell EqualLogic and we will use SQL 2008 as SQL 2012 is not yet supported.  Thanks for the help!

  I think that your SQL guy assumes the ESXi host will be caching on its own transparent for the VM by default. This is incorrect, ESXi does nothing like that.

  The only place where caching of write i/o can happen is on the side of physical storage outside ESXi, so in your case the SAN controllers (no reason not to have this license here too long as it is on battery/flash) or the discs themselves (ugh, it is never enabled by default for a good reason).

  BTW: I'm pretty sure that SQL 2008 is not supported on Server 2012.

• disable the balloon pilot

  Hello

  We'll be the citrix server virtualization.  I had read a lot of articles & they say all "disable the balloon pilot during installation vmtools" during the installation of girl I can't find something to do with a balloon pilot.  I found something else that says that you must disable this through the VI client & gt; guest operating system etc, but it is for the host.

  is it possible to do this thinking the VM tools so that it only disables the balloon on the VM?

  Thank you

  Strongly, I agree with the above two posts and do not recommend disabling the balloon on any virtual machine pilot! But if you are here is the procedure to do so.

  :

  Connect directly to the ESX Server host computer where the virtual machine resides on, using Virtual Infrastructure Client (VI Client).

  -Stop the virtual machine.

  -Right-click on the virtual machine on the inventory Panel, then click on change settings.

  -Click on the Options tab, and then select general.

  -Click on the Configuration settings.

  -Click Add a line, and then add the sched.mem.maxmemctl setting in the text box.

  -Click on the line next to it and add a 0 in the text box.

  -Click OK to save the changes.

  If this answer was helpful please consider rewarding points.

• SQL Server compact: the filemay of the damaged database.

  I get a Message at startup:

  An error occurred initializing SQL server compact: the filemay of the damaged database. The dataabase file may be damaged.  Run the repair utility to check the file daatabase.  [Database Name = \\?\\C:\program data\DDN;\Oasis2service\data\oasis2.sdf].

  Where can I find the repair utility?

  Hello

  Try asking in the Forums in SQL Server.

  Here is the Vista Forums.

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer

  See you soon.

• Windows 7 64 bit Pro connects to SQL Server on the Windows Server 2008 R2 Standard domain

  I put upgraded to Windows 7 Professional computers to Windows XP Professional, but I have a problem with getting one of software programs management of stock that allows us to connect to our SQL Server 2008 R2 Standard Windows on new Windows 7 computers.

  Our computers are connected to a domain, and therefore SQL Server. Computers Windows XP allows each user to standard domain to connect and to connect to SQL Server via the stock management software.

  But on the standard domain of Windows 7 Pro computer users unable to connect to SQL Server, but administrator accounts of area on the same Windows 7 Pro computers can connect to SQL Server through the inventory control program.

  I have set up the alias of the server, the server name and port number via the SQL Server Client Network utility ( cliconfg.exe ) so I know this isn't the problem because it works when I'm logged on as a domain administrator.

  There seems to be something to do with permissions of user domain and Windows 7 Pro. There seems to be a change from Windows XP Pro to Windows 7 Pro that does not allow standard domain users to connect to a SQL Server. But I can't find anything about and cannot practice how to solve this problem, except to make all users, domain administrators that is obviously not a good thing to do. So basically I think I need to create a group policy that allows users to connect to SQL Server, but I have no experience in doing this and don't know where to start.

  Thank you for all that you guys help and I hope someone can give me the solution to this problem.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Can I install SQL Server on the server vCenter?

  Is it possible to install SQL server on the vCenter server or the connection to the server...

  Due to limited memory problems, I have to make some adjustments with my setup to migrate.

  Thanks in advance.

  Hey Taher843,

  If your environment is small, you can install vCenter with SQL Express that comes with the installation of the vCenter server.

• Disable the test pilot

  I just noticed test driver in the list of tools. I never loaded it. I also found that I was on the beta channel that I never accepted to be. I have loaded just release 23.01, but cannot remove the test pilot. It does not appear in the list of addons, so there is no option to delete.

  How can I get rid of this unwanted addon?

  On my old XP PC, kept for an earlier application only, I run Firefox 19.0.2 with updates disabled (never check the updates). Yesterday, an application of the test pilot appeared request an update for one of "my studies". Had no idea that this was therefore rejected. Arises once or twice more, so I looked for info and found this page. How she came in my non updated geriatric FF? Remove it now.

• SQL Server, get the event ID 10016 hourly

  Hi guys,.

  We get the error message below on our SQL with OS WS2012 server every hour.

  "The application-specific permission settings do not grant permission to local Activation for the application server COM with the CLSID.

  {FDC3723D-1588-4BA3-92D4-42C430735D7D}

  and APPID

  {83B33982-693D-4824-B42E-7196AE61BB05}

  the user NT SERVICE\SQLAgent$ IBSQL2012 SID (S-1-5-80-485265429-2350460967-4062759752-2586802043-2488535659) from address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool. »

  I have been through a few threats and read it from another post on the internet, but under Component Services, tab of the particular service related to this message (based on its APPID) I see that SYSTEM is already added and it has the Launch Local and local Activation permissions granted to the security.

  Why are we always get that number, because instead of local authorities, we should give remote "..." from LocalHost (using LRPC) address... » ?

  All thoughts

  MCG

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

• try to uninstall MS SQL Server 2008 the Profession of XP 64

  Has anyone experience this problem that can help?

  When I uninstall MS SQL Server 2008, I get some errors:

  (1) "input string is not in the correct format.

  (2) "there was an error trying to delete the configuration of the product that prevents any other action."  The current configuration of the product is being canceled as a result. »

  see you soon

  Hello

  Your question of Windows7 is better suited in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

• SQL Server for the TMS

  Hello

  We install TMS v15 and we will use external SQL. What communication ports, protocols, and services that are required for communication between the server SQL and MSDS?

  Thank you

  LAN

  Hello

  As directed by installation of TMS external help SQL server guide, requirement of network latency between the Cisco TMS server and SQL server should not exceed 20 ms.

  For the ports used by TMS refer to this guide on page 13.

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS/Install_Guide/Cisco-TMS-install-guide-14-6.PDF

  For connections SQL, the TCP port used by an instance SQL server by default is configurable, and the port used by a named instance of SQL server is dynamic, changing whenever the service restarts.

  For instructions on taking your SQL server server to listen on a particular port:

  https://TechNet.Microsoft.com/en-us/library/ms177440.aspx

  Kind regards

  Acevirgil

• latitude longitude coordinates SQL Server and the plot on the map of the brochure

  My question is basically:

  How to transform the data from SQL Server and map by unfolding?

  TIP: We run 11 Coldfusion, SQL Server 2000, flyer and JQuery if that helps somehow. If I need to download a javascript library, I can easily do.

  I ambulance and fire events in a database with the xy coordinates. My goal is to ask them about the news and place them on a map of the brochure. All our ambulances and fire trucks have gps in them and they broadcast at all times their location and status. Here's my query to get the latest data from gps for each truck;

  /*

  SQL Server 2000

  David Kulpanowski

  June 4, 2015

  Lee County EMS

  */

  SELECT

  DateTimeStamp

  RTRIM (CallSign) AS [Guide]

  RTRIM (UnitStatus) AS [UnitStatus]

  Latitude

  Longitude

  CONVERT (VARCHAR (15), DateTimeStamp, 106) AS [CurrentDate]

  CONVERT (VARCHAR (10), DateTimeStamp, 108) AS [CurrentTime]

  OF FireEMSGPSDatabase

  RIGHT OUTER JOIN

  (

  SELECT

  RTrim (CallSign) AS [Ambulance]

  MAX (DateTimeStamp) AS [MostRecentTime]

  OF HISTORY_201506

  WHERE RTRIM (CallSign) AS "LCM__".

  RTRIM GROUP (CallSign)

  )

  LIKE [MostRecent] on DateTimeStamp = MostRecent.MostRecentTime

  ORDER BY RTRIM (CallSign) CSA

  ;

  Shown below is an example of this query output;

  Call DateTimeStamp Latitude UnitStatus Longitude CurrentDate CurrentTime

  2015-06-04 17:14:17.357 LCM01 QA 26.56428 - 81.87044 June 4, 2015 17:14:17

  2015-06-04 17:14:17.357 LCM01 QA 26.56428 - 81.87044 June 4, 2015 17:14:17

  2015-06-04 17:14:18.670 LCM02 QA 26.64074 - 81.86507 June 4, 2015 17:14:18

  2015-06-04 17:14:34.420 LCM03 AR 26.64157 - 81.90973 June 4, 2015 17:14:34

  2015-06-04 17:14:20.420 LCM04 TA 26.63885 - 81.94159 June 4, 2015 17:14:20

  2015-06-04 17:14:21.297 LCM05 QA 26.4377 - 82.07806 June 4, 2015 17:14:21

  Below is my Coldfusion page with the flyer plan added in and the cfquery with cfoutput;

  <! DOCTYPE html >

  < html lang = "en" >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < meta name = "viewport" content = "width = device-width, original scale = 1.0" >

  " < link rel ="stylesheet"href =" http://CDN.leafletjs.com/leaflet-0.7/leaflet.CSS "/>

  " < script src =" http://CDN.leafletjs.com/leaflet-0.7.3/leaflet.js "> < / script > .

  < / head >

  < body >

  < cfquery datasource = "GPSDatabase" name = "AmbulanceLocation" >

  SELECT

  DateTimeStamp

  RTRIM (CallSign) AS [Guide]

  RTRIM (UnitStatus) AS [UnitStatus]

  Latitude

  Longitude

  CONVERT (VARCHAR (15), DateTimeStamp, 106) AS [CurrentDate]

  CONVERT (VARCHAR (10), DateTimeStamp, 108) AS [CurrentTime]

  OF FireEMSGPSDatabase

  RIGHT OUTER JOIN

  (

  SELECT

  RTrim (CallSign) AS [Ambulance]

  MAX (DateTimeStamp) AS [MostRecentTime]

  OF HISTORY_201506

  WHERE RTRIM (CallSign) AS "LCM__".

  RTRIM GROUP (CallSign)

  )

  LIKE [MostRecent] on DateTimeStamp = MostRecent.MostRecentTime

  ORDER BY RTRIM (CallSign) CSA

  < / cfquery >

  < cfoutput query = "AmbulanceLocation" >

  < table >

  < b >

  < td > #DateTimeStamp # < table >

  < td > #CallSign # < table >

  < td > #UnitStatus # < table >

  < td > #Latitude # < table >

  < td > #Longitude # < table >

  < td > #CurrentDate # < table >

  < td > #CurrentTime # < table >

  < /tr >

  < /table >

  < / cfoutput >

  < div id = ' map' > < / div >

  < script >

  var L.map = map ('plan' {Center: [26.5641867068354,-81.8704100173261], fullscreenControl: true, zoom: 12});

  L.tileLayer ('http://{s}.tile.osm.org/{z}/{x}/{y}.png').addTo(map);

  < /script >

  < / body >

  < / html >

  To sum it all up - I have a SQL Server query that retrieves the last my ambulances xy coordinates. I have a Coldfusion page that has a map of the brochure and the cfquery. My question is how to plot coordinates in a flyer plan. I can't understand the middle of the book to get the results of my query in terms of the brochure.

  In addition, it is a dynamic environment. Ambulances are constantly in motion. This page must be dynamic, so that the page can be updated to show the latest data.

  You must create the map and tile layer prior to place markers and then run your loop inside of the script tag.

  I highly recommend reading through the tutorials on the site of the brochure.  They go on these things in detail.

  Quick start - leaflet guide - a JavaScript library for the mobile environment maps

• [4EA2] connecting to SQL Server with the second instance

  Connection to the early work of the Forum very well and I can choose the DB for this instance.

  There is a second instance... In the ODI driver, can I use this syntax

  JDBC:WebLogic:SQLServer://Server \instanceName_Reporting:1433

  I tried to enter the host name server\instanceName tab in SQL Server... It does not work... Does not the 3.2 Developer either.

  Any ideas?  I don't know what the custom jdbc url must be if I tried to use the Advanced tab.

  Found the answer

  In the port field enter

  1433/database; instance = second instance

  3.2 I did not change any how xml, it works as it is.

• Number of databases such as Oracle and SQL Server in the same application ADF

  Hello
  
  In my application, I need to use two different databases such as Oracle and SQL Server. There are screens that I need to develop in the ADF where I need to involve fields of the tables in these two different databases. I just want to know - is it possible to do so in application of the ADF?
  
  Or to create a sort of link between these databases in the backend? Then create a view object involving some distributed SQL queries. What can I do with this type of request than anything? I mean, can I use the two insert or update operation using this VO?
  
  Or y at - it another way to do this?
  
  Please help, help here would be really appreciated. I've been stuck with this problem for a while now. I did search our forums for the same problem, but was not able to find a reliable solution.
  
  Thank you
  Vijay

  It's still not clear to me if you need two db tables in a query, or a transaction.
  If this is the case, your best option (to my knowledge) is to use a db link. in this way, you only need to access (for example the oracle db) and can access the objects from the other data from the oracle database.
  I don't understand
  >
  (3) a model project with a meeting of the two datasource. I selected a data source and created OT and VO. When I have selected a different data source and select tables to create VO and EO and finished but these EO and VO is displayed in project. >

  (2) If you need to link data from these two dbs you can not use this approach (see the note at the top of the post)

  Timo

• Developer SQL, SQL Server and the ampersand

  Hello
  
  I am connected to a SQL Server database (2008) and has difficulties to get a query runs correctly in SQL Developer (3.1.07).
  
  Simplified example
  
  Select table_field
  table
  where table_field <>'This & That ';
  
  Expected results
  
  table_field
  Other stuff
  Other stuff
  Other stuff
  
  Actual results
  
  table_field
  Other stuff
  This & That
  This & That
  ....
  
  
  I can't get SQL Developer to recognize as a literal ampersand &. I tried it out in many ways, but he still thinks it's a variable.
  
  The query works exactly as expected in MS SQL Management Studio and Toad. Of course, I can just run it in one of these, but I would try to get this working with SQL Developer. Suggestions?
  
  Please let me know if I can provide further information. Thank you.

  Hello

  SQL worksheet to developers is designed for Oracle, but we allow you to execute instructions SQL Server and other databases Oracle not.
  This can lead to some quirks, such as the one you met.

  Oracle SQL * Plus uses and commercial for define substitution variables.
  Oracle SQL Developer has implemented the same concept.
  Unfortunately there is no sense when something is running on an Oracle database no.

  To work around the problem, you can run the following SQL * Plus command in SQL Developer, before your query SQL Server.
  TOGETHER TO DEFINE
  Select "Hello & Goodbye";

  The following may be useful as well.
  http://dermotoneill.blogspot.com/2010/11/workheet-hints.html
  http://dermotoneill.blogspot.com/2010/12/SQL-Server-and-Sybase-browsing.html

  Kind regards
  Dermot.
  SQL development team.

• I don't see a SQL server in the menu to the bottom when you create a SYSTEM DSN?

  What could prevent me from seeing a list of all the SQL servers in my environment when you create a SYSTEM DSN?

  The drop down menu has only a single SQL Server available. IM using W2K8R2 64 BIT and I have also installed the 64-bit SQL to ODBC client.

  you have dbo on the MSDB and the VCDB?  Whatever it is, no instance DB and no permission you should always see SQL servers in your environment. When you created the DSN system, you used the SQL Native Client not the SQL Server driver?