SQLFire has all the apps in real time

Similar Questions

• iPhone has all the apps/deleted photos but storage to 100% complete

  I hope someone can help me. I received an error message that my storage was too low. I checked the settings and I had only a few applications and documents that haven't even reached 3 GB I erased everything but my phone continues to display less than 500 MB of free space. It is not sensible, if you manually add all the storage specified in the parameters that each application uses its not even 2 GB bit total says 10.7 gb. What can I do?

  I tried to restore and started with 10 GB free after a few hours he said still "no available storage..." Is this a failure of app that "fills" storage? Don't know what else to do.

  

  Do you use whatsapp?

• HI everyone, I paid almost 10 days ago, my supcripcion to plan for all the app elements, and after u date of my latest plan, any program is runing, always appear, your time taking, is late, please by the app with my adobe ID works correctly?

  HI everyone, I paid almost 10 days ago, my supcripcion to plan for all the app elements, and after u date of my latest plan, any program is runing, always appear, your time taking, is late, please by the app with my adobe ID works correctly?

  Photoshop Elements and Premiere Elements are NOT part of the cloud... you buy a serial number, not a subscription, and you enter the serial number during installation

  If you don't want to say things, read below

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I used the trial before run, but I bought all the apps for 20.00 a month now. When I download it to my computer, it keeps telling me that my trial has expired. I uninstalled the program and reinstalled but it always says "expir├⌐ trial" any id

  I used the trial before run, but I bought all the apps for 20.00 a month now. When I download it to my computer, it keeps telling me that my trial has expired. I uninstalled the program and reinstalled but it always says "expiré trial" any ideas on what I can do? I paid already

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• monitor thread on the system in real time

  I have a SMU-8101 controller in my PXI system. I have it running with a system of operating in real time. I inherited some software WHICH has been used on a program of LabWindows used on a PC with a Windows 7 operating system. The SOFTWARE seems to work OK. My problem is when I leave the program I get an ERROR of EXECUTION NOT DEADLY

  "

  Source position thread ID unknown 0x000000EC

  Your CVI program ended on the target in real time. However, there still on the target in real time, the threads that are running or have already run the CVI code.

  Please check that your application cleans all its threads. Son left running after that your application can crash the target in real time when your application is unloaded.

  "

  As I said I got the code and there is a lot of it. I am looking for a smart way to track down these threads. I was wondering if there are tools available that could help with this? Or any other suggestions on how to run these lines down?

  Hi DPearce,

  This article knowledge base has some information on why CmtDiscardThreadPool causes your program hang and gives some recommendations for fixing it.

• Control of data using multiple thermocouples via indicators and the waveform in real-time

  I apologize in advance for this question is probably a bit simple but I'm all new to labview and the forum and could use some advice. I have a CompaqDAQ with two 9213 16 modules of track and I'm trying to read in 30 thermocouples in a waveform, but also display 30 indicators so I can mark each indicator with the thermocouple for real-time tracking. Each thermocouple corresponds to a specific location and it is essential that the interface has an accurate indication or a label for each of them. I wonder if there is an easy way to do this in addition to split the signal and have 30 thermometers on my diagram? Perhaps a table any? If I use a table to create 30 thermometers, the DAQ assistant automatically sorts the thermocouples according to ascending numerical order. For example, would be the indicators of first and second on my interface automatically assigned to channels a0 and a1 of the first module, or should I do it manually? Even for the waveform?  Thank you very much!

  PS - Do not know if this message had need of more details, but let me know if more information is needed, and I'll give you!

  I see that you use the DAQ Assistant to create your task.  Now I understand why you may have about labelling.  It is easy of the seller NOR spiel booting...  But in any case, you already have a task to the MAX instead of use the DAQ Assistant?  The interface is similar and there may be a step or two, but your end application will be more effective and you will have more options with your data and properties.  For example, I tried to update the names of physical channel in the DAQ Assistant installation program, that it let you do, but it propagates that change forward to waveform chart legend.  Also, I don't know any property for this dynamic data type node, although I never use it either.  I suggest the setting up of your task and channels, Max if you'd give it a go.

  Since I thought I didn't really takes you all the way with you help, I wrote another one.  It uses a cluster, even if it's a bit barbaric.  I thought that there was a more eloquent way to do by changing labels, but I could not it works as I had expected.

• 5 Lightroom Develop module does not display the changes in real time - locks on original image

  After almost a year of using Lightroom 5 (Version 5.7.1) with no problem there now will not show changes/changes I do them in the main view of the magnifying glass.  The image on the film down changes.  The Navigator view darkens, once a change is made.  If I I have the active secondary monitor it will show the changes in real time (because of the quality of the secondary monior I do not use it for changes).  If I go back to the magnifying glass library display changes to develop module are shown.  I can also make do and discover tiem real changes in the Librrary module in the quick develop Panel. IF I come back to the develop Module updated (edited) image but more it is stuck on this image in the Loupe view.   I suspect strongly I accidentally made some key race in the error that created this situation, but I can't really pinpoint exactly when this problem occurred are contiguous 5 days ago.

  The problem persists with any image.  I tried several images - old and new.  The only software or any other change that I have introduced in the last 30 days was Piccure + 30 days ago.  I later have it removed as a precaution.  No change has resulted.  I took additional measures include 1) Reseting preferences (twice), 2) reinstall the software twice, the second time I deleted all the files of supported / presets except the current catalog and 3) I have used backup catalogs as well dating back to the period of time, well before the problem appeared.  I am running Windows 7 Professional with Service Pack 1, 64-bit OS

  Any suggestions greatly appreciated.  I feel like I'm under low on things to try.  Thanks - Jeff

  This could be caused by a defective monitor profile.

  As a diagnostic tool and possibly a temporary solution, try to set the monitor to sRGB profile.

  Go to control panel > color management and define the sRGB as the default profile.

  If this solves the problem, you should ideally calibrate your monitor with a standard material.

  

• I can't buy all the apps from the App Store

  I can't buy all the apps from the App Store. Every time I try, I get a message saying required verification and the update, billing information. I changed my I cloud of password yesterday and it checked and my billing information are up to date. I don't know what the problem is.

  Of course it looks like yo do not have a means of valid payment on your account.

  If you have any questions please contact iTunes:

  http://www.Apple.com/support/iTunes/contact/

• updates from app store said all the apps are updated no visible apps

  "After a reset of the screen of the App Store updates is empty except for ' all apps are up to date. Updates at the bottom of the screen icon doesn't show any number. I know that some of the apps have been updated as I see on the iPad to my wife.

  Only if your wife has all the same apps otherwise I do not see a problem.

  Try one

  Force reboot

  http://support.Apple.com/en-us/HT201559

• where the daqmx on real-time target files are stored?

  Hello

  I'm working on an application that is embedded in a desktop RT target.  To make the system easier to maintain in the future, I would like to be able to generate a DAQmx task programmatically to the *.ini file exported from MAX.  In this way, users don't know what my code does to recalibrate the sensors or manage new material; they only know how to use MAX and where to store the files in config on the target.

  Where are the task daqmx, channel, and scale information stored on an RT target?  I have been through the files on the target you are looking for something that contains my task data but have found nothing, while dropping a node of system property in a VI running on the target will give a correct list of the tasks that I set up.  (The project that contains the aforementioned VI has no tasks in it IE: I do not import into the project.)

  Is there a utility that runs on the RT target that can generate a task at the time of the *.ini files exported?

  Thank you

  Exahustive keyword search led me to an answer on the forums.  I'll post here a brief summary in case someone else uses the same key words I.

  1 export the MAX configuration file

  2. write a VI that uses tools in the system palette to load the configuration on the target in real time.

  3 profit.

  In my case, the VI I wrote to download the config DAQmx also generates the configuration files for the screw on the side host and target, so everyone knows what is called tasks.

• Taking the average of the data in real time

  Hi all experts!
  I am a new Member in labview. I have a "stupid" question that takes a lot of my time. Please help me.: mansad:
  The problem is that the way to take the average of the data in real time. For examples, firstly take averages of 100 samples and then then wait 100 samples and averaging them and so on...
  In any case, thank you very much! : manhappy:

  Hello

  Maybe this will help you...

  Kind regards...

• Browse the contents of the hard disk of the target in real time

  Hello

  Is there an easy way to browse the content of the hard drive on a real-time target by using the file path control (or another type of control)?

  What I have in my application is a PC real-time desktop (running on PharLap) who has a Main.vi running on it. There are a few configuration files (for this VI) I want to be able to read and record to that would be stored on the hard drive of the target in real time. However, when the application runs and I hit the Browse button, it displays the contents of the Windows machine and not the machine in real time. Is there something I'm missing?

  Please note that I can send via FTP on the Windows computer to the target in real time and can interact with the drive of the target in real time without any problem.

  Thank you.

  Mike

  If you LV 2013 actually use WebDAV screws thus:

  http://digital.NI.com/public.nsf/allkb/4EBE45E8A816B19386257B6C0071D025

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvcomm/WebDAV/

• Transparent or semi-transparent navigation bar all THE apps in Lollipop

  Hello community,

  I want the report to the screen, a bad feature of our Sony with press.

  The navigation bar that contains the soft keys touch remains black in all applications (exception Album and other Sony apps). It smells very bad to see, so there is a solution, a mod, an app WITHOUT ROOT to have a transparent or semi-transparent navigation bar?

  For example, in Chrome, will be perfect to have transparent navigation bar to see full web page complete!

  Thank you!

  Hi Alexdon,

  I read the thread, but does not answer my question; It talks about the immersive mode, but not on the transparent navigation bar.

  But, indeed, the immersive mode is better than the transparent bar, so I searched the web on and I found an interesting application, requiring no root, which allows the user hide the navigation bar in ALL the apps and home screens.

  So, I don't know how Sony has not implemented this feature HIGH on his Xperia devices wih the latest firmware, because it is a feature that enhance value, functionality and beauty of its features...

  The app is named on game of Google as a store GMD Immersive Mode full screen and his works fine (tested personally). The only bug is the keyboard, a bug of Android, where the navigation bar must be required to type and should not used with the camera app (but app inventory also have similar immersive mod).

  I hope that this thread can help other users and, especially, can be read by employees of Sony to natively implement this update functionality in the future or when comes out the new home screens.

• How can I block or password protect all the apps?

  My kids are crazy with the printer on my printer app, every day, I have someone has turned on a new application and printed a bunch of comic strips, puzzles, colouring etc.  How to password protect or block all the apps market in the first place?  I always want my printer to be hung on the network for the convenience of printing from any computer in the House, but the apps are driving me crazy and costing me a fortune in paper and ink.  Help, please.

  Hi smjoines007,

  You can go into the built-in Web (EWS) of the printer server and disable the application under the Administrator setting.  To prevent your children to access the built-in Web server, you can also set a password for the built-in Web server.  Here are the instructions:

  a. Enter the IP address of the printer in a Web browser (for example. IE, FireFox or Chrome)

  b. Select the tab 'Settings' (ignore any warning of web server certificate and continue)

  c. Select "Administrator settings" in the side menu

  d. uncheck 'Apps' and apply

  e. Select "Password settings" on the side menu

  f. Select a password for EWS and apply

  I hope this helps.

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us