Sqlite in statement PendingOperation prepare

Similar Questions

• SQLite Update statement

  I have a database in my application, and part of it (obviously) will require the user to update the database with the current information.

  There are 24 columns of the table, and I have my update function works almost 100%, except that there are two drop downs, and when the user updates the record individual everything that is selected in the fall of two downs, is applied to all records.

  My update statement is like this:

  var statement:SQLStatement = new SQLStatement();statement.sqlConnection = connection;statement.text = "UPDATE TABLE SET " +      "OneFish=?, " +       "TwoFish=?, " +       "RedFish=?, " +       "BlueFish=?, " +          // CONTINUES AS TEXT INPUTS DOWN TO       "DropDown1=?, " +     "DropDown2=?, " +          // FEW MORE TEXT INPUTS THEN                "WHERE RECORD_ID=?";       statement.parameters[0] = OneFish.text;       statement.parameters[1] = TwoFish.text;       statement.parameters[2] = RedFish.text;       statement.parameters[3] = BlueFish.text;          // CONTINUES AS TEXT INPUTS DOWN TO       statement.parameters[17] = DropDown1.selectedItem;        statement.parameters[18] = DropDown2.selectedItem;          // FEW MORE TEXT INPUTS THEN        statement.parameters[23] =                FishOption.selectedItem.RECORD_ID;                statement.addEventListener(SQLEvent.RESULT, updateWorked);                statement.addEventListener(SQLErrorEvent.ERROR, updateFailed);                statement.execute();
  

  ALL updates day very well and shown to the a specific RECORD_ID. However, the decline in the bottom change overall.

  This does not happen on my service of "addFish". Someone out there have any ideas why this is?

  Update: It isn't my SQL. If I close the application and then go back, the changes show correctly. The drop down menus are simply not refreshing properly after the update of the database.

  J.Rab!

  I literally JUST thought out and sat next to the woman to rejoice with the laptop on my lap! Then the BlackBerry made his small notification and I said out loud, "oh look, it's probably somebody tell me what I did wrong before that I could update!

  Had dinner and a record label with a look at it to understand.

  To display the resulting data & update fields, I was setting the command prompt from the drop down menus! I went my output and changed function use the selectedItem and success!

  I also forgot to include a refreshTheDatabase(); at the end of my updateFunction() function call;

  I hit a brick wall with this for several hours this afternoon and I can't believe it was that simple! I should have got up and walked away earlier!

• Error no prepared statement

  OS 7.1

  SQLite DB

  I create a screen with 3 buttons of pill.  The first pill button displays a detail screen of the item selected from a previous screen.  Second and third pills show lists of items associated with the selected point hand.  I use a cursor from the main screen to keep the information of the details screen.  When I got to the second pill and try to get the list of questions, I get an error of database on the slider "statements not prepared."

  Cursor tagsCursor = null;
          try
          {
              Statement statement;
              // Get Single Site
              statement = SQLManager.appDB.createStatement("SELECT Key, iBase, SiteBPNumber, "
                      + "CurrentMeterCount, LaborWarrantyFlag FROM "
                      + tableName
                      + " WHERE SiteBPNumber = ? ");
              statement.bind(1, siteBPNumber);
              statement.prepare();
              tagsCursor = statement.getCursor();
          } catch (DatabaseException de) {
              SDApp.handleException(de, "Get Tag Query");
          }
  
          return tagsCursor;
  

  It is an application similar to the one who gets the first list of the screen cursor and retail.

  I have not found a solution to this error.  I think it might have to do with the database connection is already opened with the previous cursor.  But if I close the cursor to the first list of the screen and the detail, I get an error on this cursor.

  I don't know what I should do about it.

  Too bad.  I think I need a vacation.

  You must prepare before linking.

  So, this

  statement.bind(1, siteBPNumber);
  statement.prepare();
  

  Should be present

  statement.prepare();
  statement.bind(1, siteBPNumber);
  

  Well.  Who lost a lot of my time.

  Also.  I use a function that brings back a cursor.  After I completed the list by the cursor, I closed this slider and it seems to have worked very well.

• SELECT SQLite statement failed

  I've reached the point where I need to crowd source this error.

  I try to run the following code:

  uri = URI.create("file://" + _optionsData.getStorageURI() +     OptionsData.DB_NAME);
  sqliteDB = DatabaseFactory.open(uri);
  Statement st = sqliteDB.createStatement("SELECT * FROM foo");
  st.prepare();
  Cursor c = st.getCursor();
  Row r = c.getRow();
  int size = r.getInteger(0);
  

  Creates the URI end to the database of opening works very well.  The statement is prepared.  However, when I get the cursor, it is 'empty', containing no information line or column.  c.getRow () returns a NULL reference and the following statement fails with a special Null pointer.

  The SQL code has been checked with a SQLite spy program to the same database.

  To check that I have all correct on the connection to the database, I changed the code to make an INSERT using st.execute (), and the values inserted in the database.  Verified by SQLite Spy.

  It will fail in the same way on the 9700 "Bold" standard simulator that comes with the Eclipse plugin and the specific Storm 2 Add-on Verizon Simulator.

  Any suggestions?

  Solved my problem.

  The code snippet, before you start changing things to try to understand what wasn't in question a "SELECT MAX (id) foo" call.  Thus, it only returns a single line.

  I come from a background of Perl/MySQL, and I didn't know that when you have a line that is returned, you should always call the next() on a cursor before it will be initialized.  Therefore, the above code should read as follows:

  Statement st = sqliteDB.createStatement("SELECT MAX(id) FROM foo");
  st.prepare();
  Cursor c = st.getCursor();
  if (c.next()){
      Row r = c.getRow();
      int size = r.getInteger(0);
  }
  

  When c.next () is called, the cursor is on the first line.

• management reporter user guide located in the section of training and preparation

  I try not to locate the following documentation of management journalist who is a download of CustomerSource by accessing the State of preparation and training section to training materials, on the left side of the screen.  From there, click on the menu down and select Management Reporter from the product list.  The title of the publication is to report in Microsoft Office PerformancePoint 2007 Management Reporter design, PP001 course number.

  Can you help me get this file?

  Luca

  Hello

  You need to contact support for the site where the download is available,

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hub blackberry blackBerry 10 preparation solution

  Hello all, I had this problem I can't access my emails, contacts etc as the hub just said "Blackberry hub preparing" for 3 days now.

  I tried the

  "Many reboots.
  "hit to swipe in the right corner to the Center 5 times"
  "Exploitation of the volume 'up' and 'down' keys to the reset option.

  I try to avoid the infamous security wipe.

  Any suggestions please?

  Hello Ira.

  Thank you very much for your advice. I've finally went down the path dreaded wipe security but had first backed up my phone in "State of preparation blackberry hub."

  After clearing security and normal phone put in place, I restored my phone from the back upward, and he began to work normally for a few minutes after the restoration was completed if I update my login information for each of my accounts.

  Thanks again

  Toki

• ADOPTION PHASE prepare crashes at txkADOPPreparePhaseSynchronize.pl

  Hi all

  EBS 12.2.4 and make ADOPTION prepare phase and it crashes right here. I don't see any errors on the CLONE newspapers.

  ************

  Start of session *.
  version: 12.2.0
  begins: Friday, June 12, 2015 21:37:40

  APPL_TOP is set to/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl
  [STATEMENT] [EARLY 2015/06/12 21:37:40] Determine the admin node
  [STATEMENT] [END 2015/06/12 21:37:42] Determine the admin node
  [STATEMENT] [EARLY 2015/06/12 21:37:44] Acquisition of a lock on the sessions table
  [STATEMENT] [END 2015/06/12 21:37:45] Acquisition of a lock on the sessions table
  [STATEMENT] [EARLY 2015/06/12 21:37:45] Check that the waiting for sessions
  [STATEMENT] [EARLY 2015/06/12 21:37:48] Staging of the current session
  [STATEMENT] [EARLY 2015/06/12 21:37:52] Check if the node 'ebswl' is abandoned
  [STATEMENT] [END 2015/06/12 21:37:54] Check if the node 'ebswl' is abandoned
  [STATEMENT] [END 2015/06/12 21:37:55] Staging of the current session
  [STATEMENT] [EARLY 2015/06/12 21:37:58] Unlock sessions table
  [STATEMENT] [END 2015/06/12 21:37:59] Unlock sessions table
  [STATEMENT] [EARLY 2015/06/12 21:37:59] adzdoptl.pl run
  [STATEMENT] Session ID: 16
  [STATEMENT] Phase: prepare
  [STATEMENT] Log file: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/adop_20150612_213726.log
  [STATEMENT] [EARLY 2015/06/12 21:38:06] prepare phase
  [STATEMENT] PREPARE Phase START TIME: 06/12/2015-21:38:07
  [STATEMENT] [EARLY 2015/06/12 21:38:12] Configuration validation
  [STATEMENT] The call: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSanityCheck.pl
  [STATEMENT] Output directory: / data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adoption/16/prepare_20150612_213726/PROD_ebswl

  Program: launched @ Fri Jun 12 21:38:15 2015

  Log File = /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/TXK_SANITY_filesystemcheck_Fri_Jun_12_21_38_15_2015/txkADOPPreparePhaseSanityCheck_Fri_Jun_12_21_38_15_2015.log

  
  Program: complete @ Fri Jun 12 21:38:16 2015

  [STATEMENT] [END 2015/06/12 21:38:16] Configuration validation
  [STATEMENT] [EARLY 2015/06/12 21:38:17] Detect FS config changes
  [STATEMENT] [EARLY 2015/06/12 21:38:18] The execution of adConfigChangeDetector on ebswl
  [STATEMENT] The call: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/adConfigChangeDetector.pl
  [STATEMENT] Output directory: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adConfigChanges.log
  The log file is /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adConfigChanges.log

  / Data/nfs_share/D01/Oracle/prod/FS1/inst/Apps/PROD_ebswl/Appl/admin/cutover directory not found, so configuration changes cannot be detected.
  The folder may have been deleted intentionally or accidentally. Or, if it comes to the first cycle of the adoption, the directory will be created only after failover.

  Without this directory, configuration changes will be propagated in the filesystem patch with force.

  Detected configuration change.
  [STATEMENT] [END 2015/06/12 21:38:23] The execution of adConfigChangeDetector on ebswl
  [STATEMENT] Config changes detected in ebswl
  [STATEMENT] [EARLY 2015/06/12 21:38:24] Insert the Config clone online tracking for the NŒUD: ebswl
  [STATEMENT] [END 2015/06/12 21:38:29] Insert the Config clone online tracking for the NŒUD: ebswl
  [STATEMENT] [END 2015/06/12 21:38:30] Detect FS config changes
  [STATEMENT] [EARLY 2015/06/12 21:38:31] Check to see if, in anticipation of cleaning measures exist
  [STATEMENT] Check if pending clean-up
  [STATEMENT] [EARLY 2015/06/12 21:38:34] The cleaning steps
  [STATEMENT] Cleaning call because the cleaning has not been accrued in the previous session of patching.
  [STATEMENT] [EARLY 2015/06/12 21:38:36] Cleaning steps
  [STATEMENT] [EARLY 2015/06/12 21:38:38] Break-in DDLS CLEANING table manager ddl
  [STATEMENT] [Early 2015/06/12 21:38:39] ADOP::DefaultsFileUtil:substituteDefaultsFileTokensForPatchApplTop
  [STATEMENT] Default values for reading file /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/admin/PROD/adalldefaults.txt
  [STATEMENT] Substitution of chips...
  [STATEMENT] Regenerate default file...
  [STATEMENT] [End 2015/06/12 21:38:39] ADOP::DefaultsFileUtil:substituteDefaultsFileTokensForPatchApplTop
  [STATEMENT] Calling: adpatch options = /hotpatch, interactive nocompiledb = no console only = no workers = reboot 24 = no abandonment = Yes defaultsfile=/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/admin/PROD/adalldefaults.txt patchtop=/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/driver logfile = cleanup.log driver = ucleanup.drv
  [STATEMENT] ADPATCH logs directory: / data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adoption/16/prepare_20150612_213726/PROD_ebswl/log
  [STATEMENT] Race: options adpatch /hotpatch, interactive nocompiledb = no = no console only = no workers = reboot 24 = no abandonment = Yes defaultsfile=/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/admin/PROD/adalldefaults.txt patchtop=/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/driver logfile = cleanup.log driver = ucleanup.drv stdin = yes

  Managed to create directory
  [STATEMENT] [END 2015/06/12 21:39:01] Break-in DDLS CLEANING table manager ddl
  [STATEMENT] [EARLY 2015/06/12 21:39:02] Report generation to view all DDL to ad_zd_ddl_handler
  [STATEMENT] Report: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/sql/ADZDALLDDLS.sql

  [STATEMENT] Output: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adzdallddls.out

  [STATEMENT] [END 2015/06/12 21:39:05] Report generation to view all DDL to ad_zd_ddl_handler
  [STATEMENT] Cleaning of the call in STANDARD mode
  [STATEMENT] [WARNING] Cleaning may take some time. Please wait.
  [STATEMENT] [END 2015/06/12 21:39:09] Cleaning steps
  [STATEMENT] [EARLY 2015/06/12 21:39:10] Report is generated to display the status of cleaning
  [STATEMENT] Report: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/sql/ADZDCLEANUPRP.sql

  [STATEMENT] Output: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adzdcleanuprp.out

  [STATEMENT] [END 2015/06/12 21:39:46] Report is generated to display the status of cleaning
  [STATEMENT] [END 2015/06/12 21:39:50] The cleaning steps
  [STATEMENT] No. pending the actions of cleaning, proceed with other steps
  [STATEMENT] [END 2015/06/12 21:39:52] Check to see if, in anticipation of cleaning measures exist
  [STATEMENT] [EARLY 2015/06/12 21:39:53] Delete rows in the ad_patches_tables table
  [STATEMENT] [END 2015/06/12 21:39:55] Delete rows in the ad_patches_tables table
  [STATEMENT] [EARLY 2015/06/12 21:39:56] Performing DB sanity checks
  [STATEMENT] [EARLY 2015/06/12 21:39:56] Check if there are users of the edition enabled
  [STATEMENT] [END 2015/06/12 21:39:58] Check if there are users of the edition enabled
  [STATEMENT] [EARLY 2015/06/12 21:39:59] Perform a check of the existence of service patch
  [STATEMENT] [END 2015/06/12 21:40:01] Perform a check of the existence of service patch
  [STATEMENT] [EARLY 2015/06/12 21:40:02] Check for clearance and the existence of the Logon trigger
  [STATEMENT] [END 2015/06/12 21:40:04] Check for clearance and the existence of the Logon trigger
  [STATEMENT] [END 2015/06/12 21:40:05] Performing DB sanity checks
  [STATEMENT] [EARLY 2015/06/12 21:40:05] Tablespace report generation
  [STATEMENT] [EARLY 2015/06/12 21:40:07] Report is generated to display the status of the large storage spaces. (ie. the free space)
  [STATEMENT] Report: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/sql/ADZDSHOWTS.sql

  [STATEMENT] Output: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adzdshowts.out

  [STATEMENT] [END 2015/06/12 21:40:10] Report is generated to display the status of the large storage spaces. (ie. the free space)
  [STATEMENT] [END 2015/06/12 21:40:10] Tablespace report generation
  [STATEMENT] [EARLY 2015/06/12 21:40:11] Run the competitor program ADZDPATCH
  [STATEMENT] [EARLY 2015/06/12 21:40:15] Check the status of the competitor program ADZDPATCH
  [STATEMENT] Status of ADZDPATCH:
  [STATEMENT] The next available simultaneous Manager will process this request.  This
  request will process as soon as the concurrent Manager ended his
  current processing and the processing of other applications to this
  request. The SYSADMIN user submitted this request on June 12, 2015 21:40:14.  NO.
  measures to be taken. It is a normal condition. You can speed up the beginning of
  the processing of this application by reducing its priority value. Only the
  Responsibility of the system administrator can update the values of priority of application.
  [STATEMENT] [END 2015/06/12 21:40:19] Check the status of the competitor program ADZDPATCH
  [STATEMENT] The concurrent application number: 474176
  [STATEMENT] [END 2015/06/12 21:40:51] Run the competitor program ADZDPATCH
  [STATEMENT] [EARLY 2015/06/12 21:40:52] Report generation to view all DDL to ad_zd_ddl_handler
  [STATEMENT] Report: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/sql/ADZDALLDDLS.sql

  [STATEMENT] Output: /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/adzdallddls.out

  [STATEMENT] [END 2015/06/12 21:40:56] Report generation to view all DDL to ad_zd_ddl_handler
  [STATEMENT] [EARLY 2015/06/12 21:40:56] Check and create Patch (if necessary) edition
  [STATEMENT] [EARLY 2015/06/12 21:40:57] Check if the edition Patch already exists
  [STATEMENT] There is no Edition of patch
  [STATEMENT] [EARLY 2015/06/12 21:41] Edition of Patch creation
  [STATEMENT] [END 2015/06/12 21:41:17] Edition of Patch creation
  [STATEMENT] [END 2015/06/12 21:41:18] Check if the edition Patch already exists
  [STATEMENT] [END 2015/06/12 21:41:18] Check and create Patch (if necessary) edition
  [STATEMENT] [EARLY 2015/06/12 21:41:19] The steps to synchronize data FS
  [STATEMENT] [EARLY 2015/06/12 21:41:20] Steps to CLONE FS to EXECUTE it and PATCH appltops
  [STATEMENT] [END 2015/06/12 21:41:25] Steps to CLONE FS to EXECUTE it and PATCH appltops
  [STATEMENT] [EARLY 2015/06/12 21:41:26] The steps for syncup FS of RUN and PATCH appltops
  [STATEMENT] [EARLY 2015/06/12 21:41:28] Sync FS RUN and PATCH
  [STATEMENT] The call: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl
  [STATEMENT] Output directory: / data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adoption/16/prepare_20150612_213726/PROD_ebswl

  Program: launched @ Fri Jun 12 21:41:30 2015

  Logfile = /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/TXK_SYNC_update_Fri_Jun_12_21_41_30_2015/txkADOPPreparePhaseSynchronize_Fri_Jun_12_21_41_30_2015.log

  cmd = / data/nfs_share/d01/oracle/PROD/fs1/EBSapps/comn/util/jdk32/jre/bin/java - classpath /data/nfs_share/d01/oracle/PROD/fs1/FMW_Home/Oracle_EBS-app1/shared-libs/ebs-appsborg/WEB-INF/lib/ebsAppsborgManifest.jar:/data/nfs_share/d01/oracle/PROD/fs1/EBSapps/comn/java/classes-mx256m oracle.apps.ad.tools.configuration.ADOPCustomSyncUp - contextFile /data/nfs_share/d01/oracle/PROD/fs1/inst/apps/PROD_ebswl/appl/admin/PROD_ebswl.xml - custSyncDrv /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/appl/ad/custom/adop_sync.drv - logFile/data/nfs_share / D01 /. Oracle/prod/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/TXK_SYNC_update_Fri_Jun_12_21_41_30_2015/txkADOPCustomSyncUp.log - promptmsg 'hide '.
  ADOPTION Custom Synchorization executed successfully

  Program: complete @ Fri Jun 12 21:41:49 2015

  [STATEMENT] [END 2015/06/12 21:41:49] Sync FS RUN and PATCH
  [STATEMENT] [END 2015/06/12 21:41:50] The steps for syncup FS of RUN and PATCH appltops
  [STATEMENT] [EARLY 2015/06/12 21:41:51] Steps for CONFIG_CLONE FS to EXECUTE it and PATCH appltops
  [STATEMENT] There is a clone session waiting for the file system/data/nfs_share/d01/oracle/PROD/fs2
  [STATEMENT] [EARLY 2015/06/12 21:41:56] FS CONFIG_CLONE following steps
  [STATEMENT] [EARLY 2015/06/12 21:41:57] CONFIG_CLONE PATCH FS with RUN FS
  [STATEMENT] The call: /data/nfs_share/d01/oracle/PROD/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl
  [STATEMENT] Output directory: / data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adoption/16/prepare_20150612_213726/PROD_ebswl

  Program: launched @ Fri Jun 12 21:42 2015

  Logfile = /data/nfs_share/d01/oracle/PROD/fs_ne/EBSapps/log/adop/16/prepare_20150612_213726/PROD_ebswl/TXK_SYNC_migrate_Fri_Jun_12_21_42_00_2015/txkADOPPreparePhaseSynchronize_Fri_Jun_12_21_42_00_2015.log

  *************

  and then the session just stays there and does not move.

  STATUS of the ADOPTION reveals:

  Current patch ID of Session: 16

  Name of node node Type Phase status started completed elapsed
  --------------- --------------- ----------- --------------- ------------------------------ ------------------------------ ------------
  ebswl master PREPARE running 12 June 15 09:38:07 - 07:00
  APPLY NOT STARTED
  COMMISSIONING IS NOT STARTED
  CLEANING NOT STARTED

  
  Folder synchronization system used in this Patching Cycle: None

  File system information:
  ========================

  ***********

  How long is it supposed to work?

  I don't see the necessary CHANGES or configs side WLS...

  Thank you
  

  I bounced the server and this has solved the problem.  Go figure... Thank you to everyon' help... very appreciated... !!

• SQLite error in Flex/Air application:

  I'm doing a simple query from inside and demand for Air SQLite:

  Statement.text = 'SELECT Ingredient' +
             'FROM Ingredients'+ 
             'WHERE FoodCatagory_FK = 6'
  

  It works fine when I exicute the query in SQLite Manager, however in the Air, I get the following error:

  SQLError: 'Error #3115: SQL Error.', details:'near 'FoodCatagory_FK': syntax error', operation:'execute', detailID:'2003'
  

  Don't know why it doesn't work, it seems pretty Strait forward.

  Thank you

  Hello

  You must leave a space either after

  Ingredients
  

  or before

  WHERE FoodCatagory_FK
  

  Thank you

  Tamil

• Order of the iPhone

  I go the iphone7 order + 19/9

  and he said: it will be delivery between 11/10-17/10

  but the State of the process is still in its housing on part of treatment about two weeks

  they will be actually delivered between the date or not?

  They should be.  Mine was stuck in the treatment of a week and a half, and shipping and final delivery arrived within 5 days after that State passed preparing to ship.

• Microsoft Silverlight cannot be activated. There is no option to select only activate because it is impossible to select the drop-down list even if it is the most recent version

  I can't activate Microsoft Silverlight. I've attached a screenshot of control. This is the only plugin that says "disabled" next to him. I've updated to the latest version and there is no option on the page of the plugins to acivate because he says 'never activate' and no other selection is selectable.

  Unfortunately, your screenshot is not come through. You can link it to a reply in this thread if you wish.

  If you exit Firefox and it starts again since installing Silverlight, please try this in case a file is locked.

  Can also see you in the editor preferences as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the npc and make a pause so that the list is filtered

  (3) If you find a preference for the plugin.state.npctrl preparing to something other than one, try to double click on it and set it to 1. For reference:

  • 0 = > never activate
  • 1 = > ask to activate
  • 2 = > always activate

  If the preference has a different status from 'the user game' as 'locked', which would indicate a different problem.

• iPhone 4 crashed, has entered into recovery mode and don't update or restore (error 4013)

  Hi all

  So, the other day, while watching a YouTube video, my iPhone 4 became unresponsive and turns off. Since then, he has been slain in recovery mode, only showing the "connect to iTunes screen.

  iTunes gives me two options: update or restore. As I wanted to save my data (I have been so sloppy as to not have backed up the device for about a year!) I tried to update a bunch of times. However, it keeps me gives error 4013. Then, having given up this possibility, I also tried to restore the device several times, but unfortunately exactly the same phenomenon occurs.

  What happens is: iTunes downloads and extract the software, says "waiting for iPhone" for a few seconds, then it said "Preparing iPhone software update" because I think little about exactly 15 minutes. Then he said "Waiting for iPhone" still for a few seconds, after which it gives me error 4013.

  My guess is the iPhone automatically leaves the recovery mode so that it gives me this error because after 15 minutes and restarts alone, leaving iTunes to "think" that there is some kind of connection problem or do not recognize the device as being the same when it turns off and turns back on after 15 minutes. If this is the case, perhaps restarting interrupts the update/restore process. Or maybe just crashes in this state of preparation for 15 minutes because he is unable to do what he needs because of a sort of damaging the material.

  What I've tried so far:

  -Update iTunes to the latest version (12.2.2)

  -Updated the software on my Mac (although I must say that it is an old MacBook with OS X 10.7.5; I don't know if it's any factor here)

  -Restarting my computer

  -Switch to the other USB port

  -Using another USB cable (although the one alternative that I have is not in very good condition)

  -Try on a friend's computer (a much newer MacBook; I don't know what operating system well)

  -Force the device to restart a package of time (now the power and the home buttons)

  -A few third-party applications that claim to be able to get the iPhone out of recovery mode

  Any of you have ideas, ideas or suggestions on what is the cause and how can I get my phone back to life again? Recover my data would be obviously ideal, but I would also be very happy with just equipped with a device of work once again. I know it's an obsolete phone but it has always worked well.

  Thank you in advance for your help!

  Anyone? I could really use some help. Thank you!

• Error code 800b0100 when using windows update

  Installation of Vista 32 bit, most of my windows updates do not settle. The files downloaded through Windows Update, which is set to be installed after asking, not automatically.  Update process begins, progress window moves toward completion, then at one point in the installation stops and the status display indicates failure of the installation.
  I could not install the updates for Vista Home premium 32-bit system.  Downloaded the State of preparation of system tool update, which the log file reports 5 errors, which seem to be missing files.  Question is how to get and install the missing files?

  Here's the extract log report:

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_1_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB957321_client_0~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB957321_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB957321_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1989
  Found 5 errors
  CBS MUM lack count: 5

  Unavailable repair files:
  servicing\packages\Package_1_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB957321_client_0~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB957321_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB957321_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_1_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB957321_client_0~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB957321_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB957321_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB957321~31bf3856ad364e35~x86~~6.0.1.0.cat

  Interesting answer.  Anti Virus is McAfee Security Center v 9.15, last updated 19/11/09 (interesting to note that it is not updated since then...)

  You see the effects of 2 months-plus hijackware infection.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 2550PS LaserJet won't print

  Please do not laugh at the age of my printer. It does everything but print. Have tried all the instructions in this enormous amount of info provided with the printer but nothing helps. Drum does not turn to that can be the problem. Anyone had any experience with this particular model? Any help will be appreciated.

  If this device is able to print the test pages internal successfully, you may need to check the issues related to the connectivity of the device with computer (network, parallel, USB) and the software/driver installation is done on the computer.

  If the device is not able to boot successfully until the State of PREPARATION due to a mistake or not able to print internal test pages, then the (Panel status LED) error code displayed by the printer can be useful for the resolution of issues related to the peripheral equipment.

• Reference Dell poweredge r530 - increase the disk space

  Hello

  We currently have a Dell Server poweredge R530, with installed 5 hot swappable drives with RAID 5 configured. I need to increase disk space for our virtual machines, bought an x 2 extra 1.2 TB SAS drives to install. What is the correct process to add 2 new readers to the table and increase the space available in the 2012 R2 windows server? Could someone sanity check process below please:

  1. install the 2 new drives while the server is powered and operating normally. (What I have to install 1 player and wait a while, or two disks can be installed directly after the other?)

  2. go in dell iDRAC and confirm the visibility of 2 new readers.

  3. wait until the readers successfully have been added to the State through iDRAC Tracker

  4. go in the management of the storage within the 2012 R2 server to allocate new space for the virtual machine partitions.

  Is more correct? It feels like I'm missing an essential step, it cannot be that simple that it allocate the additional storage space on a live production server?

  Any advice appreciated

  Thank you

  1. the two drives can be added at the same time.

  2 iDRAC is not the best way to do it. Unless this is your only access to the server, use OMSA leave within the OS.

  3. the process is not automatic. Once readers show up in a State of PREPARATION, you will need to go to OMSA, PERC, storage, virtual disks and select Reconfigure in the drop-down list of tasks available for RAID 5. (In fact make the statement reconfigures / expansion was the 'crucial step' you left on your list of ;).))

  4. Yes.

  Are your 1.2 to existing disks SAS drives?

• How to use Pragma instructions in BlackBerry 5.0

  Hi all

  How can we use SQLite Pragma in BlackBerry? Please help me with an example. When we run this pragma instructions? When creating the db or db opening?.

  Thank you

  Abees

  SQLite pragma statements are not supported on BlackBerry Smartphones.