SQLite recover data error

Similar Questions

• problems after upgrading firefox. reset this is ugly. created the new profile, but can not recover data from old profile.

  I use firefox on a MacBook pro. Mac OS X version 10.7.5. There was an update of firefox on a day or 2 ago. Since this was done, I was getting 'syntax error' 5 times, each time that a page has been loaded. Some research has suggested that an application or a plug-in called "social fixer" might be the problem but I could not understand how to get rid of it so decided to try to reset Firefox. Minutes passed and a message was on the screen saying the old files of firefox have been been "cleaned" or something, but it seems to be 'stuck' because the progress bar was little jerky. Doesn't it usually doesn't. So I clicked on "Cancel". After that, I couldn't even firefox to start. Looks like my profile is unavailable or inaccessible. Following the instructions found on the support site, I created a new profile and I thought I copied the files from the previous firefox on the new profile, but when I run firefox, it's a blank slate. None of my bookmarks or passwords are there. It must be here somewhere, but I can't seem to understand.

  Looks like there was a problem with updating the profiles.ini file.

  • http://KB.mozillazine.org/profiles.ini_file

  You can try to remove the current profiles.ini file to force Firefox to create a new default profile where Firefox has not done that.
  You can check if there is a profile folder with a number of attached time stamp and in this case, you can set the location of a profile created in this folder.

  • http://KB.mozillazine.org/Recovering_a_missing_profile
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  If you need to recover data from an older profile, always in the default location, or as a folder of old data of Firefox on the desktop then see:

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Blue Screen on Satellite P100 - need to recover data

  Putting on my laptop yesterday, I was faced with a blue screen error message that even after running chkdisk keeps appearing, even on reboot in safe mode.

  The problem is I only have the Toshiba recovery disks (not a disc XP - XP was preinstalled on your laptop) and they say on them using the wipe recovery disk computer and I need to recover data on the hard drive before reformatting.

  I took the laptop to the local repair center and they say they have to reformat and do not make data recovery.

  Any suggestions gratefully received.

  Hello

  In my opinion, there are two solutions. Is, try to get the facilities WXP CD and see if you can fix it using the option to repair Windows XP Home edition or use supplied recovery media and do a clean install of the operating system. After doing this you will put factory once again and everything will be OK again.

• Recover data with the Diadem 11.0 PDM and Labview 8.6

  I have a VI in Labview 8.6, which generates an TDMS containing 5 channels of population data.  I did have problems with the VI until today when 4 out of the 30 TDMS files I generated could not be loaded in Diadem 11.0.  I got a Diadem declarant could not impoart all channels or channel data from this data source.  26 other loaded fine TDMS files and was able to run one of my VB scripts on the set of data without any problem.  TDMS repair tool requires at least Labview 2009 must be installed.  Is it possible to recover data from the 4 files, or is there a different tool I can try all the previous advice, I read on the various positions have not managed to provide an operational solution.  Any additional suggestions or help would be greatly appreciated.

  Thank you

  Mike

  I added an attachment of the error dialog box and one of TDMS files.

  
  

• Recovering data from hard drives of laptop data

  1. laptop computer work with a hard drive to work (I know that this is the case if you insert the disc of the laptop, it works, it loads windows xp, you can use the laptop according to the normal without errors / problems etc.)

  We have a disk external drive kit (again I know works as I use to connect to a multitude of other hard drives via the USB port of a desktop PC) and I have another kit to different hard drive for the first USB SATA hard drive recovery kit and it does the same thing when you try to access the data on the hard drive for laptops

  If I connect the laptop hard drive to my desktop PC it won't appear in my computer even if you right-click my computer--> manage--> disk management

  The drive appears here as not initialized and will fail if you try to initialize the disk indicating there CRC errors and it will not assign a drive letter.

  Is there a quick way to access the data on the disk?

  As much as I know readers are not encrypted as when loading after the bios POST, you get not all blue / violet loading gauges, this is Windows XP SP 3 so do not use bit locker or something like that.

  What should I do to get access to data as quickly as possible without making too many steps or waiting for utils recovering data, etc..

  Also, what do Lenovo for the drives causing headaches as much?

  Am confused with your part external kits...

  In any case, I assume you have a computer laptop lenovo work and office work. You try to connect lenovo's HARD drive in a USB drive kit and extract data from the desktop.

  (1) is the disc encrpted HARD lenovo? Check the Bios and also if lenovo security software are installed.

  (2) the fastest way I'm doing it today is to connect laptops and office to a network. Share the disk, and then extract the data from the laptop or desktop. A second option is remote laptop and retrieves the data.

  (3) another possibility is that your laptop is XP, IE the formatting isn't AHCI (check the bios under sata), it is in compatibility mode. The Office use Vista or Windows 7?

• erestore fails on my Aspire 5733Z with a data error

  I bought the Acer erestore media, and when I went to restore, I get the error "restore failed - error code = 0 x 17(Data error (cyclic redundancy check).)" on drive recovery 2/3. Following the Advisor in this thread, I tried to copy the CD to an ISO on another computer using InfraRecorder. He noted a lot of read errors which he could correct after attempts up to 108, followed a read error that it could not recover from. (I tried recovery 3 3 which reads very well, so it is probably just disc 2)

  I would like to restore this computer, and I have a strong preference for not buying restore discs more (there seems to be a significant number of drives with media errors, based on reports in this forum).

  What are my options? Can someone from Acer help?  I did all of this successfully on a (non-portables) another Acer, I had and it worked very well, but I seem to have lack of rope on this machine.

  Help?

  I agree with JackE - try rubbing alcohol or a special DVD/CD cleaner.

  A "cyclic redundancy check" basically means that he cannot read data, so if the cleaning is no help, then contact technical support & explain. They should send a replacement FOC drive

• I get an error code 0 x 80070017 data error cyclic redundancy when you save.

  Original title: Trouble when backup Vista basic

  During the backup, I get this message... Verification of data error: 0 x 80070017 cyclic redunancy. The backup fails. Any advice? Thank you...

  Hi Arctical,

  ·         When you save the backup?

  ·         Has it worked fine previously?

  This error occurs if the hard disk has errors on this subject.

  I suggest that you run a check disk on drive c and then try the backup.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  a. open the computer by clicking the Start button, click computer.

  b. click the hard disk you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix file system errors and Scan for and attempt recovery of bad sectors.

  d. click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps!

• error code 0 x 80070017 data error cyclic redundancy when you save

  I get error code 0 x 80070017 data error cyclic redundancy when you save. Publication solutions (error checking - automatically fix files) have not worked. Help!

  Hello

  1. When you save the backup?

  2A it worked fine earlier?

  This error occurs if the hard disk has errors on this subject.

  I suggest that you run a check disk on drive c and then try the backup.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  a. open the computer by clicking the Start button, click computer.

  b. click the hard disk you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix file system errors and Scan for and attempt recovery of bad sectors.

  d. click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  
  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  
  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• Data error (cyclic redundancy check); Error code 0 x 80070017

  OS: Win7x64-home. On the last system weekly backup on USB expansion, including several manual attempts, received a notice of Action Center "last backup was not successful; Data error (cyclic redundancy check); Error code 0 x 80070017. "Correct previous backups; have not seen this error on previous weekly backups; possible cause?

  Hi DavidLFish,

  I suggest that you run a check disk on drive c and then try the backup.

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  1. open the computer by clicking the Start button, click computer.

  2. click on the hard drive you want to check, and then click Properties.

  3. click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix file system errors and Scan for and attempt recovery of bad sectors.

  4. click on Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  I hope this helps!

• Is it possible to recover data after the factory restore?

  Hi, I have laptop G62-340US and I use windows 7 64-bit. I am having trouble with streaming online videos, and whenever I start my computer, it shows a kind of errors, so I thought to restore my computer to factory setting. But I have some data inportant on my computer. I've been me request so if it is possible to recover data after the factory restore or I do something that restor factory will not delete my data?

  Hello

  You will need to back up all your personal files, etc. before executing a factory reset - an option to do this is to use the facilities available in Windows 7, as described in the guide on the link below.

  http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

  Kind regards

  DP - K

• Satellite P200-1EE Possible to recover data on the HARD drive by placing it in an envelope?

  P200-1EE does not start after 2 weeks off is the case during a fan installation. Is it possible to remove the hard drive, put it in an enclosure and retrieve the data it contains on another PC? Or can anyone recommend how to recover data from the comfort of my own home?

  Thanks for your help

  I would say that your installation of fan caused this problem in the first place. I would check your installation for loose connectors, cards not seated properly, no fan or heatsinks screws tight etc..

  Everything you did everything by installing the new fan plugged the laptop. The hard disk, in my opinion, is perfectly fine. There is nothing wrong with it.

  Put the suspect hard drive in an enclosed and try to access the data on another PC. You will encounter problems with administrator access to certain folders so you will need to find a way to crack in these areas.

  If you had problems in the first place you probably should have this return to the place of purchase for them to watch.

  I hope that for your sake you have not turned into a frisbee.

  Good luck.

• Recovering data from a Time Machine to an external drive backup

  How to recover data from a backup Time Machine to an external drive?

  I use Time Machine to back up data (photos, videos) on an external drive (drive A) to another external drive (drive/B) separate that I use for Time Machine backups. After performing a backup, the external drive (drive A) appears in TimeMachine and can I recover files that are on the external drive (A) just as I can for the files that are found on the internal hard drive.

  I need to know what to do if I drop my external drive (drive A) completely and you want to recover the Time Machine backup on a new replacement drive?  When I disconnect my external drive (A) and enter the Time Machine, I don't find a way to access the files to recover.  Still... I know they are there!

  Using the Time Machine application in your Applications folder. Please visit Time Machine FAQ of Pondini for using Time Machine.

• Fried Macbookpro, need to recover data from SSD

  I recently spilt tea on my macbook pro and chips on the logic board.

  I would like someone trying to recover data from the SSD and I would like to know what type of reader is required to read this SSD.

  The macbook is a 15' mid2012 retina, 2, 6 GHz (MacBook Pro (15 inch, mid-2012 of the retina) - technical specifications).

  If you can help me find out what I need, it would be really helpful!

  Thank you

  Take the SSD on the MBP and install it in a closed enclosure.  Connect to another Mac a hope that it will be recognized.

  Ciao.

• I need a source to help me to recover data on a crashed hard drive.

  I need a source to help me to recover data on a crashed hard drive.

  See my FAQ: *

  http://www.macmaps.com/backup.html

  * Links to my pages give me an allowance.

• How to recover data images and videos

  How to recover data images and videos of empty Recycle Bin.

  Hello

  Have you looked in the trash?

  Recover files from the Recycle Bin - Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-files-from-the-Recycle-Bin

  Recover files from the Recycle Bin - Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/recover-files-from-the-Recycle-Bin

  How to restore previous Versions of a file and the folder of Vista (Ultimate, Business and Enterprise)
  http://www.Vistax64.com/tutorials/122127-previous-versions-shadow-copy.html

  How to restore files and folders in Windows 7 with previous Versions
  http://www.SevenForums.com/tutorials/85679-previous-versions-restore-files-folders.html

  ----------------------------------------------------------------------------------------------------------------------------

  This could help you recover a file, or a previous version (all versions of Vista and Windows 7).
  http://www.ShadowExplorer.com/

  ShadowExplorer - recover lost files and folders (Vista and Windows 7)
  http://www.SevenForums.com/tutorials/132087-ShadowExplorer-recover-lost-files-folders.html

  ----------------------------------------------------------------------------------------------------------------------------

  Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
  map of the camera digital or MP3 player. And it's free!
  http://www.Piriform.com/Recuva

  Recuva - Forums - help here
  http://Forum.Piriform.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">