Fried Macbookpro, need to recover data from SSD

I recently spilt tea on my macbook pro and chips on the logic board.

I would like someone trying to recover data from the SSD and I would like to know what type of reader is required to read this SSD.

The macbook is a 15' mid2012 retina, 2, 6 GHz (MacBook Pro (15 inch, mid-2012 of the retina) - technical specifications).

If you can help me find out what I need, it would be really helpful!

Thank you

Take the SSD on the MBP and install it in a closed enclosure.  Connect to another Mac a hope that it will be recognized.

Ciao.

Tags: Notebooks

Similar Questions

  • problems after upgrading firefox. reset this is ugly. created the new profile, but can not recover data from old profile.

    I use firefox on a MacBook pro. Mac OS X version 10.7.5. There was an update of firefox on a day or 2 ago. Since this was done, I was getting 'syntax error' 5 times, each time that a page has been loaded. Some research has suggested that an application or a plug-in called "social fixer" might be the problem but I could not understand how to get rid of it so decided to try to reset Firefox. Minutes passed and a message was on the screen saying the old files of firefox have been been "cleaned" or something, but it seems to be 'stuck' because the progress bar was little jerky. Doesn't it usually doesn't. So I clicked on "Cancel". After that, I couldn't even firefox to start. Looks like my profile is unavailable or inaccessible. Following the instructions found on the support site, I created a new profile and I thought I copied the files from the previous firefox on the new profile, but when I run firefox, it's a blank slate. None of my bookmarks or passwords are there. It must be here somewhere, but I can't seem to understand.

    Looks like there was a problem with updating the profiles.ini file.

    You can try to remove the current profiles.ini file to force Firefox to create a new default profile where Firefox has not done that.
    You can check if there is a profile folder with a number of attached time stamp and in this case, you can set the location of a profile created in this folder.

    If you need to recover data from an older profile, always in the default location, or as a folder of old data of Firefox on the desktop then see:

  • Recovering data from a Time Machine to an external drive backup

    How to recover data from a backup Time Machine to an external drive?

    I use Time Machine to back up data (photos, videos) on an external drive (drive A) to another external drive (drive/B) separate that I use for Time Machine backups. After performing a backup, the external drive (drive A) appears in TimeMachine and can I recover files that are on the external drive (A) just as I can for the files that are found on the internal hard drive.

    I need to know what to do if I drop my external drive (drive A) completely and you want to recover the Time Machine backup on a new replacement drive?  When I disconnect my external drive (A) and enter the Time Machine, I don't find a way to access the files to recover.  Still... I know they are there!

    Using the Time Machine application in your Applications folder. Please visit Time Machine FAQ of Pondini for using Time Machine.

  • I am recovering data from 720 KB diskettes.

    About 14 years ago I saved about 150 paint files (all illustrations) on 25 Dysan double face, double pre-formatted density 720 KB 3-1/2 "floppy disks.  I am their opening and copy of Windows XP.  Everything works fine, except for two 2 discs.  The program tells me that the disks are not formatted, and I want to format it now?  I said 'no' because I didn't want to erase all data.  It does the same thing at first to a single disc, which later, I was able to copy.  Do anyone knows how I can get back safely the work of these 2 diskettes, or I won't be able to recover this data?  Thanks for any help that anyone can provide.

    I used it to recover data from some pretty bad removable media:

    http://www.CGSecurity.org/wiki/TestDisk_Download

    It's not pretty, and if you need to have a GUI for doing things on the computer (with 14 years of experience, I'm sure you did a little work on the command line!) this is not the tool for you.

    Let me know if you have any questions.

  • Blue Screen on Satellite P100 - need to recover data

    Putting on my laptop yesterday, I was faced with a blue screen error message that even after running chkdisk keeps appearing, even on reboot in safe mode.

    The problem is I only have the Toshiba recovery disks (not a disc XP - XP was preinstalled on your laptop) and they say on them using the wipe recovery disk computer and I need to recover data on the hard drive before reformatting.

    I took the laptop to the local repair center and they say they have to reformat and do not make data recovery.

    Any suggestions gratefully received.

    Hello

    In my opinion, there are two solutions. Is, try to get the facilities WXP CD and see if you can fix it using the option to repair Windows XP Home edition or use supplied recovery media and do a clean install of the operating system. After doing this you will put factory once again and everything will be OK again.

  • How to recover data from scratched CD

    Original title: I want a software to recover the data of cd__

    I created a cd by direct use of the windows cd creater and now it is scratched. you want a software to recover data from the cd...

    If the disc is damaged, you cannot recover the data. Take it to Blockbuster or another place of DVDs and have them repair the disk.

  • How to recover data from the choicefield retained

    Hello

    How to recover data from the choicefield retained

    Thank you

    SujithRavindran

    getSelectedIndex method will help you.

  • How to recover data from url

    hiiiiii

    Can I recover data from url I can store in vector, but when I open the application Simulator and InDevice (via WIFI)

    It works but whrn I 1Utilisez hollow DataPlan Mobile, is not fetch url data please help me what should I add to the Url when I use Dataplans... This is my code...

    public static  Vector ParseEventList(String url){
    
            StreamConnection conn;
            EventHandler eventHandler = new EventHandler();
             try{
                 if(DeviceInfo.isSimulator()){
                     url +=";deviceSide=true" ;
                 }else{
                     url +=";interface=wifi" ;
                 }
    
                 conn=(StreamConnection)Connector.open(url);
    
                 SAXParserFactory saxParserFactory = SAXParserFactory.newInstance();
                 SAXParser saxParser = saxParserFactory.newSAXParser();
                 saxParser.parse(conn.openInputStream(), eventHandler);
    
             }catch (final Exception e){
    
                UiApplication.getUiApplication().invokeLater(new Runnable() {
    
                        public void run() {
                            Dialog.alert(e.toString());
                        }
                    });
             }
            return eventHandler.getEventList();
        }
    

    I'm Talking on these lines

    if(DeviceInfo.isSimulator()){
                     url +=";deviceSide=true" ;
                 }else{
                     url +=";interface=wifi" ;
                 }
    

    Use the attached code

    Determines what type of connection to use and returns the string required to use it.

  • Instant orphaned files - need to recover data on the basic disk

    Hello

    I'm sure this has been asked several times before, but how merge content from an instant orphan to the basic disk?

    Reading over there seem to be several different methods to do so.

    I have a virtual machine with three RDM, the virtual machine is running at the wide base VMDK disks but there is a single snapshot file associated with each base VMDK, snapshots do not appear in the Snapshot Manager.

    I tried to change the snapshot. The VMDK files and change the parent CIDs for the basic disk, but still not instant show in the Snapshot Manager.

    Is the best way to stop the virtual machine, remove the inventory and then add it to the inventory, I don't see the shots if the parent CID is correct?

    What is a better method?

    2. turn off then turn off the virtual machine (if it is not already off). Stop the current virtual machine with any Active snapshots.

    3. once the virtual machine is completely turned off, create a unique snapshot of the virtual machine and do not feed upward after this step.

    4 browse your data store for the virtual machine and look for the numbers you hard files. Instant latest should only be a few megabytes, and you want one that is just before that.

    5. go to the command line console and edit the .vmx for your virtual machine in the container for data store. Looking for a similar article to the following for each of your virtual disks.

    scsi0:0.present = "true"
    scsi0:0.fileName = "???-00002.vmdk"
    scsi0:0.deviceType = "scsi-hardDisk"

    You want to change the "scsi0:0.fileName =" section under the same file name that you found in step 4. You will need to repeat this in the file for each virtual disk on your VM.
    Save the .vmx file, overwriting the original.

    6. now, it will be a long process, if the hard files are large (more than 20 concerts) and can last several hours. During this process, you may lose connectivity to your ESX Server on the client of the infrastructure. What you need to do is run the below command from within the container to store the virtual machine data.

    vmware-cmd <your .vmx file> removesnapshots

    7. once the previous step is complete, check your VM settings in client infrastructure and check that your virtual disks are now pointing to the original hard file (does not contain de-00001 etc.). If everything was successful, you should be able to power to the top of your VM.

    8. once the virtual machine is running and check the operation, you can remove the last numbered - 0000x.vmdk that was created from your snapshot in the third stage (should only be a few megabytes). This file must have been ignored by the instant withdrawal because you have changed the .vmx file.

    Question I have is if the basic disk has been changed today I lose all changes today when merging the snapshots (which have not been written to since 18:00 yesterday)- or will be the basic disk back to 18:00 yesterday and lose all changes today?

    If you need to extract data from instant orphans, you know that you can NOT do without altering the current state
    new files from today will still be there - but they are not referenced in the MFT and other pieces are replaced by old data of the orphan snapshot
    If you must do this with a backup...

    or - possibly use a snashot of the RDM, as it is now...

    in any case – which gives good advice is almost impossible without sitting in front of the case

  • Need to transfer data from sql server at EBS

    I need to transfer data from Mirco Soft SQL server database Oracle (EBS).

    Please guide me how can I achieve this milestone in best way.

    Please provide the price of licenses of the Golden Gate and other product adapted SQL SERVER GATEWAY ect


    Thanks in advance

    There are a lot of options

    1 using SQL Server linked server is so easy
    http://www.mssqltips.com/sqlservertip/1433/how-to-setup-linked-servers-for-SQL-Server-and-Oracle-64-bit-client/
    2. use SSIS
    http://www.mssqltips.com/sqlservertip/2011/export-SQL-Server-data-to-Oracle-using-SSIS/
    3. using sqldeveloper
    http://St-curriculum.Oracle.com/OBE/DB/hol08/sqldev_migration/MSSQLServer/migrate_microsoft_sqlserver_otn.htm#T9

    hope this helps,

    concerning
    http://www.oracleracexpert.com
    ORA-19755 at the start of the recovery/DB
    | http://www.oracleracexpert.com/2009/09/ora-19755-could-not-open-change.html
    Error ORA-07445 and the reasons for which it
    http://www.oracleracexpert.com/2009/08/ora-07445-error.html

  • How to recover data from table

    I'm new to APEX 4.0, how to recover data from table

    My table is CR_USERPROFILE... and I want to recover data to the following recommendations:

    Select the title, user name, address, email, mobile, cr_userprofile where e-mail is APEX_CUSTOM_AUTH. GET_USERNAME


    Text P110_EMAIL 10 field
    20 P110_TITLE selection list
    P110_USERNAME 30 text field
    Text field P110_ADDRESS 40
    P110_PHONE 50 text field
    Text P110_MOBILE 60 field

    could any body if you please help...

    Thanks and greetings
    Luke

    Hello

    1. create the process Page.
    2. Select the Data Manipulation
    3. in the category select "Automated line Fetch".
    4 enter the process name, sequence, select "on the load - before the headers" to the point.
    5. specify the owner, table, primary key and the key column primary (Item name contains the primary key).
    6. create a process.
    7. in each element, select "Column of the database" in "the Source Type.

    Kind regards

    Patel Kartik
    ------------------------------------------------------------------------
    http://patelkartik.blogspot.com/
    http://Apex.Oracle.com/pls/Apex/f?p=9904351712:1

  • Need to recover data in tabular form for background processing

    Hi all
    I need to extract data from a form in a table to perform database operations. This tabular presentation has no editable fields as well. I tried to use the APEX_APPLICATION application items. G_F01, APEX_APPLICATION. G_F02... The problem is that I am not able to retrieve the field references l f01, fo2... for the unchangeable fields... However, I need to retrieve these values as well as for database operations that must be performed on the update. Any help would be appreciated
    Kind regards
    Vignesh

    Add any value you want using the apex_item.hidden function. It will not be returned but will be available in the form with the corresponding editable/visible ones.

    Phil

  • Recover data from spreadsheet Excel Essbase Add-in

    Hello
    Im trying to recover data from Excel, I connected to the application in Essbase, when Im clicking the recovery Im not getting something in the same Excel workbook, if I try to select the members of the member selection option, I don't get something, just the white sheet...

    Help me in this issue

    Let me know any furthur info requires...


    Thank you

    Hello

    This is more than one open workbook regular problem. Close all of your excel workbooks, open just one and try again.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Fixing and recover data from my kMyBoss to and from file real *.indd

    Hi all

    The question is this.

    I need to store some data in the document and when I close the document, my technical data should be saved to the indd file, so that when I open this document I would be able to recover my data.

    I found an interesting interface IBlackBoxData in REF API, but there are no samples or examples

    Maybe someone has some experience in the resolution of these problems?

    In short - there is advice on how to tie my kMyBoss data to the actual indd file and then restore the data from file to my kMyBoss?

    Kind regards

    Oleg

    Hi all

    I found my mistake.

    Before you define local variables, which must be registered to the use of the PreDirty() method documents.

    For Boolean data, it will be something like this:

    void CMyBoolDataImpl::Set (bool16 b)

    {

    If (m_data! = b) {}

    PreDirty();

    m_Data = b;

    }

    }

    and that's all

    Kind regards

    Oleg

  • How to recover data from the browser tabs?

    Hello

    I am trying to retrieve data from the Firefox browser by dragging the tabs in a Windows/Mac/Linux application. Specifically, I was hoping to capture medadata HTML and video current time (for example, 01:23 05:00) YouTube pages for storage off favorite browser and reactivation.

    I couldn't find an online help or the documentation dealing with this issue.
    Any suggestions?

    Thank you

    There is an additional command that is added at the end of the url of Youtube. You need to add & = t * m * s at the end of the url. Where the asterisks are, replace you them with numbers. For example: http://www.youtube.com/watch?v=Zb7gTeLmpHs & t = 3m24s

    The m is s for seconds and minutes.

    You can also find this information by loading a video from Youtube, by dragging the time slider to the time you want to pause the video, and then right-click on the video and choose:

    'Copy the URL of the video at the present time'.

Maybe you are looking for

  • Time Capsule: create networks of 5.0 and 2.4 with different names

    I've got a video doorbell Skybell requiring the 2.4 GHz network have a different name from that of the 5.0 GHz network. Find no way to do it in Airport utility

  • Error-200220 with PCMCIA card 6062E + BNC-2110

    Hi all I have a problem with the map 6062E. This is my version of LabVIEW 2010. As is apparent from the attachment, MAX is able to find the device and his name is "Dev17". Also on LabVIEW control channel side found this device and channel a0. What is

  • R32 upgrade to USB 2.0

    Has anyone ever imagined a way to upgrade a Thinkpad R32 (Type 2658 F2M) to support USB 2.0? Rgds, Bob

  • System/Intel WIFi Link Wireless problems

    I have a HDX18t, running Vista. I have two things on course, that can be linked to another. First of all is a problem with the wireless assistant. The wireless on the keyboard area light is always red/orange. It will not change to blue when you press

  • delete a desktop icon

    Is there a way I can remove your desktop from the desktop without deleting? I have parental controls on my computer and I don't want to have to ask whenever I try to delete an icon. Help, please! Thanks... much appreciated.