square corners
I would like to have a script that takes a form
(such as a rectangle) and check
the sides at 90 degree angle. It could change the length of the part of the shape to fit the need of the angle of 90 degrees.
Nice challenge!
In particular, because she needs a strict explanation of what you want... This Javascript from the first point drawn (as much as can be that), then around the object, by checking the slope to the next point. If that slope is not right, the Next is moved horizontally or vertically to line up. Therefore, it is quite possible (likely, even) you get something different from what you expect. A six-sided polygon, for example, can collapse into a rectangle or (when it is turned slightly) in a straight line!
(It is a Javascript script, so save it as "straightenLines.jsx" in some place - preference, your local Illustrator Scripts folder, so it appears in the file-> Scripts menu at the next startup. Select an object and then run the script.)
(You can remove the comment markers to see that the angles were before running the script. These calculations were based on another idea, but then I decided to do it the easy way.)
if (app.documents.length > 0 && app.selection.length == 1 && app.selection[0] instanceof PathItem) { pts = app.selection[0].pathPoints; for (pp=0; pp
Tags: Illustrator
Similar Questions
Rectangle selection tool - lost square corners
Our computer is used by several people, and somehow the rectangle selection tool lost its square corners and to rounded shows only corners.
How to change the marquee tool to square corners?
Anyone know the answer?
Thank you.
Set the value of the pen at the back of the tool from scratch.
This is the road I took to get 4 corners of a square, if I have the Center and width/height. Is there a simpler way, or a VI that does what I missed? Sometimes, there are screws that do similar things, drawing palette and I wonder if he has neglected.
Here's what I'd do. (I think TCT had a similar idea).
You could even get rid of the 2 and just add 0.5, - 0.5, etc. in the constant of the diagram.
(of course you need not graphic code)
Create a form with round and square corners
Hi all
I haven't used illustrator for awhile, so I am really stuck on soemthing that should be simple.
I want to create a form has rounded on the bottom and the cormers square top corners.
I have created two forms, one with rounded corners with a square.
I was hoping to put together, and then use the pathfinder to join them, but this, then do the round corner square.
Is it possible to unite the shapes with different corners.
Draw a rectangle rounded with the rounded Rectangle (not with effects) tool.
Then draw a horizontal line across the top of it.
With only the line selected, go to object > path > divide objects below. Remove the high bit of the page.
Then, if you wish, you can direct select the two albums of corners and drag upwards or downwards as you need.
Please if anyone can give us some help to fix this bug, tried to enter each of the States of them individually. We have no other portions of the site with rounded corners if they are coming out like sore thumb. Perhaps he could also directly on the site in tools such as TOOLTIPS which we slightly changed normal use to meet our needs. Please let us know what another bit of information you need to train us, we may have difficulty of loading of entire pages, but it can load items.
A link or screenshots would be useful.
Make sure you have your border radius value '0' for these items.
AS3 drawing a rectangle with rounded corners and squares?
Is this possible in AS3 for a rectangle with square and round corners? I'm drawing a square, which has rounded edges on the top right and bottom left and square corners for those remaining. How can I do? Right now, I have this:
var g:Graphics = indicator.graphics;
g.clear ();
g.beginFill (0 x 512033);
g.drawRoundRect (x, y, itemRenderer.width, height - 3, 20);
g.endFill ();
Many thanks for any help with this!
You are welcome.
If you are able, please mark this thread as answered.
intermittent square borders on buttons send form
I have buttons for submitting forms with edges rounded with css "border-radius". I get intermittent square corners on the Send button. different corners every time. any ideas? the issue started firefox 23 and more.
I should mention that on the system I tested, graphic hardware acceleration is turned off in the Options (advanced options = > general = > 'Use hardware acceleration when available') for other reasons. This might or might not be relevant.
How to put corners rounded in a field?
I want to put rounded corners of a ListField, so I tried this:
this.setBorder(BorderFactory.createRoundedBorder(new XYEdges(1,1,1,1), Color.GRAY, Border.STYLE_SOLID));and it don't work the way I want to, it shows only a square corners, someone knows what is happing, what I did wrong?
Thank you...
1 pixel is perhaps too small amout of padding.
Try to make an instance of XYEdges with larger values, for example: (5,5,5,5)
Spry menu with rounded corners problem bar
Hello
I rounded upper-left & right corners on the bar using the Top Menu rule ul. MenuBarHorizontal.a. unfortunately it also rounded summits of the submenus.
I tried the menu SUP rules to try and get the submenus to square boxes but have failed.
Can someone tell me how to get the square corners of submenus, while leaving the corners of rounded top-level menu?
Thank you
Please tell me where you have placed the style for ul rule. MenuBarHorizontal ul has. I can't find anywhere in your online version.
GRAMPS
Polygon w radius of corners, aka 6 rectangle cornered to rays?
Hi people,
CS5/Win is the platform.
I have a 'calendar' design that should have groups of days described (generally regarded as a "rectangle with rounded corners"), but because of the schedule sometimes days being 'stated' are on separate lines. Picture regular corners at the top on the left and the upper right corner, but the line 'left down' and 'bottom-right"are not the same. Usually the "lower left" is a lower than the 'in bottom right"line. Imagine the lower row, resembling a 'stairs' with a single step.
The problem seems to be that when you draw a "rectangle" with more than 4 corners, some type of 'management of RADIUS' is underway, and a radius of gets changed (reduced) so that the rays do not conform to the object.
Everyone knows this? No work around? FWIW, the distance available between the two corners (which is assigned) has a sufficient distance to create the RADIUS expected...
Help, anyone?
I am able to reproduce this, but it seems to happen only when you reach a certain threshold for the size of the sides of your shape. My suspicion is that is related to the corner live path effects are managed (you can't, for example, get a real pair of. 25 "corners of rays on one dimension 5" using the effects of rounding - ID just won't go beyond the max RADIUS, which will allow the small required flat between the corners), which differs from the corners of the way which have been addressed in previous versions. I think you need to adtually draw curves yourself with the pen, or go through a fairly complex series of operations of pathfinder to combine different rounded and square cornered rectangles:
Cyan, magenta and yellow forms have been alldrawn with the tool rectangle, then selected together and a corner option applied. The pathfinder can combine forms Cyan, yellow and green, and then subtract the Magenta of the form combined in a second time. The colors are for example: you don't need fillings to work.
For what it's worth, I think it sounds better visually if the inside of the corner has a smaller radius, but you can combine things as you want using this method.
Hello
I have a lot of forms of CS4, each had several boxes with 3 rounded corners and a square corner. In CS5 all square corners changed to rounded corners. When I click on the box, I don't see the yellow diamond indicating the living corners. Is it possible to turn the living corners for these boxes?
Thanks in advanceSounds like the square corner on these boxes were made using a trick that existed in earlier versions does not work now. I can't be totally sure because I did not know until recently, and so I don't know how it works. But if it were it would have broken the direct angle options when you opened it in CS5.
Anyway to answer your question, try to go object > convert shape > Rectangle. I can't test if it will work here or not, but it should.
Rounded corners using the rectangular selection tool
Hello
Being new Photosop CS3, I used the tool of rectangle Rect (RMT) and saw that my corners are rounded (round/nets) and the bottom of the box is mixed. Is there a way to reset the RMT while I have square corners and no mixing. Also, in time, I would like to have my RMT do so, how can I have rounded corners. (Of course, I did something)
Thank you
Steve
In the Options bar at the top, set the feather to zero.
You can always add feathers to the time where you want.
Or use the form if you want more control. Draw a path with it and convert the path to a selection.
My windows Vista missing theme.
I have windows vista and just all the time when I went to my laptop, the theme looks like a style classic windows xp. (square corners and the gray look) I went to my section Customize and tried to change the "theme" back to vista, thinking that I accepted a windows pop that has changed, BUT the option to upgrade to "vista look" is not there only classic windows.
Help, please
I have the vista home edition
Thank youHaya
Hello
Restart the service of themes. Click Start, type services and press
. Click on continue in the UAC prompt. Locate "Thèmes" in the list and click on it. Click the restart option in the left column. It should find your Vista theme.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Cannot reset the border of the subform?
I'm changing the JavaScript ColorFieldsValidation to manage a situation where I want the subform set containing all fields failed to be highlighted. Highlighting works well. However, even when validation is successful, highlighting persists. I think I narrowed down it to line 32, which seems only to remove the lower border. I know that this code was written to remove the borders of fields, but why it works not for subforms?
function InitializeColorFields() { // Disable Acrobat's field highlighting. The Color // Failed Fields action takes care of highlighting fields. if (xfa.host.name == "Acrobat") { app.runtimeHighlight = false; } } function DoColorFields(oInvalidNode) { // If this form is running on a client other than Acrobat // (like on the server) then don't run this script if (xfa.host.name != "Acrobat") { return; } var sClassName = oInvalidNode.className; // Only contests, so nodes that are <field>s and // have name "Selected" // Ignore everything else if ((sClassName != "field") && (oInvalidNode.name != "Selected")) { return; } //get closest Contest var nearestContest = oInvalidNode.resolveNode("Contest") if (oInvalidNode.errorText == "") { // Validation Succeeded // Revert the appearance to its original state console.println("we good for " + oInvalidNode.name); var oBorder = nearestContest.border; //does not work! oBorder.parent.nodes.remove(oBorder); } else { // Validation Failed // Show the invalid appearance var oFailedBorder = nearestContest.border; // Border color // Show a solid border with square corners var sBorderColor; sBorderColor = "51, 102, 255"; if (sBorderColor != "none") { oFailedBorder.presence = "visible"; for (var i = 0; i < 4; i++) { var oEdge = oFailedBorder.getElement("edge", i); oEdge.presence = "visible"; oEdge.color.value = sBorderColor; oEdge.thickness = "2pt"; oEdge.stroke = "solid"; var oCorner = oFailedBorder.getElement("corner", i); oCorner.presence = "visible"; oCorner.color.value = sBorderColor; oCorner.thickness = "2pt"; oCorner.stroke = "solid"; oCorner.join = "square"; oCorner.inverted = "0"; oCorner.radius = "0mm"; } } // Background color // Show a solid fill color var sFillColor; sFillColor = "153, 204, 255"; if (sFillColor != "none") { // The presence of the border must be visible to show the fill. // Hide the edges when the invalid appearance doesn't include // changing the border color if (oFailedBorder.presence != "visible") { oFailedBorder.presence = "visible"; oFailedBorder.edge.presence = "invisible"; } // Replace the current fill type with a solid fill if (oFailedBorder.fill.oneOfChild.className != "solid") { var oFailedFillType = oFailedBorder.fill.oneOfChild; oFailedBorder.fill.nodes.remove(oFailedFillType); var oSolid = xfa.form.createNode("solid", ""); oFailedBorder.fill.nodes.append(oSolid); } oFailedBorder.fill.color.value = sFillColor; } } }An example that illustrates this problem is here: Acrobat.com shared - files
I have "fixed" the problem by changing the line 32 to this:
xfa.resolveNode(nearestContest.border.somExpression).presence = "invisible";It seems that, contrary to the edge of a field, border of a subform cannot be removed.
Submit button display form differently on mobile to the Web of Muse site
Hello!
I have created a mobile version of presentation of an arrangement of office in the Muse. There is a form of contact on both mobile and office. The version of Office Watch the button submit with square corners, which is how I asked so he could wear the title. However, when the mobile version is published and considered it shows the rounded corners instead of the formatting squared corners. Is this an inevitable browser problem or is this something that can be fixed?
There is another button on a different page, which is not related to a form which shows perfectly on desktop and mobile.
Any help would be greatly appreciated.
See you soon,.
NAT
Hi Nat,
Thank you very much for this information.
Can you please provide me with the URL of your site? Also if your button to submit site shows well in mode overview of the Muse, then I ask you to publish your site again but this time please post using the option "ALL FILES" instead of just the option "ONLY the FILES CHANGED.
Please let me know if it works.
Kind regards
Rohit Nair
Maybe you are looking for
-
Question of cloning for SSD upgrade on 12 Macbook Pro
Previously, I did an upgrade to SSD on my Macbook Air to 2012 according to the instructions of JetDrive transcend. Basically connection via USB 3 and using Mac OS X to clear (and format) disc utilities new SSD, then restore again SSD and then remove
-
I have an old ipa
-
Airport Extreme is not connecting to Internet
My cable modem works fine. Airport Exterme (7.6.4 - I just ran the Update Version) light is green. Airport Utility shows amber. WiFi is connectect to the network, but NO server or the internet. No idea what to do next.
-
I use Hp P027tx laptop with graphics from nvidia 830 m and ram 4gm. Can I put my card graphics and ram.
-
We have a group with berries PS5000, PS6000 (1) and (2) PS6100 (2). PS5000 units are now out of warranty and we want to get our data out of production out of these units. (We can gen their in the future for the storage of level 4 or something like