Remove a Member

Similar Questions

• Remove a member of a group/pool offline

  We have two units of PS400e in a pool, one of them has failed several months ago.  After working for several hours with tech support we finally gave up and just recovered data that we had of the Ribbon, then rebuilt the virtual machines, we lost.  'Good' unit was removed from the Group Manager and reconfigured and then added back to today, but the unit that failed cannot be removed from the Group Manager.

  At this point I need to remove the group system so I can reconfigure hardware and add it back in.  I tried this in the GUI interface today and received an error message about removing a member offline and "contact technical support."

  I placed the necessary technical support call, but I do not think that the technician has understood what I'm trying to do.  The unit may not be used at this stage because we cannot reconfigure and pool sees it as 'offline '.  All I want to do is delete the instance of Workgroup Manager so that I can factory reset it and add it to the group, and then reconfigure our pools so that we are not extending data through both units longer.

  Does anyone know a way to remove the 'offline' unit from the Group Manager, so I can reuse the system name and IP addresses?

  I've seen this before and short of eliminating all the members and then reset to the last remaining unit, the only way to do needs help, support.

  Ask them to do a session remotely on your desktop and show them the group leader. If all goes well, helping them to understand the problem.

• How to remove a member of the family safety

  Original title: family security

  I want to remove a member from my family of security mode, I tried a lot of time, but did not because the system displays a msg that "try sorry again, we cannot remove at the moment". what it takes to please guide me thank you

  Hi Liyasi,

  I understand that you receive error message trying to remove a member of family security and I'll be happy to answer your query. Let me ask you;

  • Are you connected snap on behalf of parent?

  Try these steps and check.

  1. Connect to http://familysafety.microsoft.com with this account of Microsoft.
  2. Click on the link manage my family at the bottom of the summary page.
  3. Select the user concerned in respect of family members , and then click remove the Member from the family at the top left of the screen.

  See also: Family Safety: frequently asked Questions

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• How to remove a member in outline?

  Hello
  I'm sure that this question has been asked many times in this forum, but I can't seem to find the answer. In addition, it seems to me that this forum does not retrieve threads that have more than 2 years.
  
  When I tried to delete a member in outline, I get the message error "the deletion of the 'Work' has no Member is used in a data form.
  How to remove a member in the plan which is already used in a FORM?
  I guess I'll have to follow the following steps:
  
  + Find the name of the object in the object table by a query - "where name = member object.
  Note the Member ID of the Member oultine to remove
  Go to the "HSP_UNIQUE_NAMES" found in the SQL table.
  Remove the line.
  Do a refresh
  Then delete this member in the following tables:
  
  HSP_MEMBER
  
  HSP_MRU_MEMBERS (System 9 only)
  
  HSP_OBJECT
  (no need to do anything in HSP_DIMENSION)
  
  Go to each shape and change the name of the former member to the new member name.
  Can someone confirm the steps above?

  user8806264 wrote:
  When I tried to delete a member in outline, I get the message error "the deletion of the 'Work' has no Member is used in a data form.
  How to remove a member in the plan which is already used in a FORM?

  Hello

  You must delete the form first and then remove the Member, it is useless to try to hack the tables because they have constraints weighing on them, so you cannot remove a member before be removed from a form.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to remove a member who has been accidentally added?

  Hello
  
  In our designed web form, users can add additional members to enter the budget for example new account code, etc. However when the added users accidentally some wrong account codes, can we delete the Member by users or admin?
  
  Our consultants on site told us that, once that the Member is created, it cannot be deleted unless you run import/export to remove the item.
  
  Any faster way can do that?
  
  Thank you very much!

  Hello

  The members account must already exist quite the user adds the Member to the definition of the form. If you want to remove the Member from the form definition, and then you change the shape.
  If you want to remove the data, then as it can be removed by deleting the data in the form and check or using a business rule to remove data.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Remove the Member from the pool shared with 3 members EqualLogic

  Hello

  I think that my last post was not able to download.

  How can I remove an EQL Member that went wrong in the shared pool?

  EQL all run raid6 and there is enough free storage to remove the bad device.

  (Bad) PS4000, PS4100 and PS6000

  Hello

  Is the table online or the poster in offline mode in the GUI?    If online, you can use the delete member option in the GUI.  This will move the data to the other members.

  What is the problem with the PS4000?

  Kind regards

  Don

• How to remove a member in Essbase

  How can we delete a member in Essbase using ODI

  Do it like you do with essbase, unfortunately, you cannot delete just, well well, you can if you've written some java custom with the essbase api.
  You have to do is create a rule of loading in EAS and an interface in ODI, in the State of charge you have 'delete not specified' and this would remove all members not in the rules file.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot able to remove a member from the Group:

  Hello

  I've had a named group compensation with currently 3 members say X, Y, Z. I'm removing 2 of them by the user to find x, then goes to his groups, selected one of its Compensation group, then

  by clicking on the button Delete.

  I see an error message to say: E-mail alias contains an invalid address.

  All of our users are synchronized with LDAP.

  Help, please. I searched all forums on this error. But I found nothing.

  Please see the screenshot below:

  

  Thank you

  Krishna
  

  I found the answer.

  It's the slightest mistake on because I'm trying to edit a group that was created in LDAP. The networking team removed the members of the group & now it works fine.

  ---

  Krishna

• How to remove the Member repeated in order to fix

  Hi, I use Iancestors on some nonleaf members but after some time, parents of these memmbers even become and becomes difficult to calculate the level after which his happens because there is 4 other hierarchies other than the hierarchy of the main. Is there a calculation function that deletes the repeated game of members of an order of fix.
  Thank you
  
  Sharad Sapra

  Sharad, Essbase executes only the calculation for one block once it dosent matter how many times you mentioned that members in trouble.
  Ex:

  FIX (@IDESCENDANTS ("E1000"), "E1000", "E1000")
  ;
  ENDFIX;

  Here the calculation will be done for E1000 block only one time.

  To find in details trying to add the MSG RETAIL VALUE; It will give you block level logging.

  Bravo...!

• 2 storage Equallogic PS6100 pool, need to remove and update of 1 member

  I PS6100 2 in 1 pool of storage. One of them is having a few problems and desperately need to have updated firmware to update (we're on 6.02, other 7.1.5 of the).

  So I want to remove the other older and move all the other Member of the pool of storage volumes. then do some maintenance (firmware) and put online and return in the storage pool.

  I see a few references to 'remove member', but don't know if it's the best way to go.

  Hello

  First question, do you have a box to open with Dell?  Moving members entrance/exit will put additional pressure on the discs.

  What are the "themes" you encounter?

  You run VMware ESXi servers?   EQL FW before 6.0.6 - H1 are vulnerable to damage to their experience VMFS data warehouses.  What is lost data.   For best results, the VMs and ESXi servers must be down when you upgrade the firmware in this specific scenario.

  You don't want to remove a member, want to create a new pool, for example "Maint" and then activate this 6.0.2 Member and move it to the pool "Maint".   This assumes that the Member still has enough free space to hold the amount of data written to the 6.0.2.  If this isn't the case, you can not remove this member from the pool unless you add in another table EQL to this pool.

  Move outside Member, will force the data to drop for the members remaining in the same pool.

  To what extent are you planning on the upgrade?   I suggest that you go at least the latest version of 8.1.x.

  On the 6.0.2 table you will need to first go to 7., 1.x, reboot, then you can switch to 8.1, x then move 7.1.x member to 8.1.x then you can merge the pools.

  Kind regards

  Don

• Remove the year classic member of planning an application

  Hi all

  I cannot remove any member of the year in the workspace when you add it to the classic planning application system.

  Does anyone know how to do? I use HP 11.2.3.000

  Thank you

  Eddy

  It is not taken in charge, please try to recreate/restore the app.

  If you want to continue to go through the RBDMS path, here is an example:

  Say if you had to FY15 FY12, now by mistake you have added FY16 and want to remove the 16 exercise:

  Delete from HSP_MEMBER where MEMBER_ID = (select object_id from HSP_Object where Object_name = 'FY16')

  Delete from HSP_OBJECT where Object_ID = (select object_id from HSP_Object where Object_name = 'FY16')

  UPDATE HSP_CALENDAR SET NUM_YEARS = 4

  First select the value of NUM_YEARS and then down number of years removed.

  Restart the planning

  In addition, he must take care of the following: after you have created the members if you have created a data form for all the FY16 (which is rare), you must remove this form of data as well, as usual planning to find FY16, if you take IDESC (YEARS), you will be good.

  PS: Do not do this if you are not aware of the implications.

  See you soon... !!
  Rahul S.

• I want to remove the group members in AD

  I want to remove the group members in AD using c# currenlty referring to the code on MSDN avliable

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa772133 (v = vs. 85) .aspx

  but make error on line

  objGroup = objADAM.Children.Find (strGroup, 'group');

  Error message:-there is no such object on the server.

  Please suggest

  Hi Stephen,.

  I understand that you need to remove the Member of group in AD.

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the MSDN forums.

  Please post your question in the MSDN Forums.

  You can follow this link to ask your question:

  http://msdn.Microsoft.com/en-us/vstudio/aa718325.aspx

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Change/Remove primary parent

  Hello

  I need to change the primary parent on behalf of Microsoft family safety from one parent to another parent.

  How can this be accomplished?

  Thank you

  Arlo

  Hello

  To change the primary parent account that is associated with your child's account, you need to remove the primary parent. This will remove all restriction settings you requested to your child. After removing the primary parent, you will need to restore on behalf of the child under the new primary parent and the installer restriction again. To do this, please follow the steps below:

  1. go to https://familysafety.microsoft.com and sign up using the primary parent account.

  2. after accessing it, you will see the main page and a list of family members who are associated with the account main parent. Click manage the list of the members of the family , this option is next to make a family member, a parent.

  3. on this page, you can remove the Member who is under your account. You can also remove the primary parent by clicking on the checkbox next to the name of the main account.

  4. Once you have chosen, all members that are related to your account will be also included.

  5. click on the Remove button and confirm the operation.

  Once this has been done, you will have to restore on behalf of the child under the new primary parent account. To do this, please follow the steps below:

  Add/Re-adding a child (with a Microsoft account) for parental control in Windows 8

  In Windows 8, you can use accounts of Microsoft as a user. You just link the Microsoft e-mail account to the new standard user. Follow these steps:

  Note: Make sure that you have an internet connection to create a user with a Microsoft account.

  1. press Windows key on your keyboard to access the applications screen.

  2. tap create an account (you will be redirected to search application screen automatically).

  3. click on settings (second option with the gear icon).

  4. click on create an account on the selection to the left pane. (You may be prompted for access admin select an admin user, and then enter the administrator password).

  5. in the account management window, click Add a user account.

  6. you will be prompted to add a user, enter the Microsoft account email address in the text box then click on Next.

  7. check This is a child account? Turn on family safety for PC usage reports.

  8. click on Finish.

  After you create the child account, you can then go to the Family Safety website, log in using the parent account and then manage restrictions and control of your child options.

  Let us know the result later.

  Thank you.

• PS5000e member offline - seeing clear status?

  We have a problem with our SAN PS5000e.  It is not a critical feature and we are moving out of it, but we need to do online if possible.

  This morning, the Member went completely offline.  I can connect via the web INTERFACE, but it just says: member offline.  Connection to CLI shows the same thing.  All CLI commands are run very slowly, and sometimes I get warnings like: "demon Logger lose messages because the disks offline are generating more events that the demon can handle."

  Unit is in a datacenter 500 miles away, so I had hands send me some photos of it.  Watch a disc orange, remaining 15 discs all have green lights, so the failed drive shouldn't have caused to go down.

  See the recentevents returns nothing.

  On the back of the unit, everything seems fine except for amber next to a label with a wavy line (possible power problem?).  Photo below:

  

  Before we get too much further with Act I would like to know what this light means if possible.

  Thanks for any help!

  Hello Teja,

  In the future, it is best to create a new topic vs change an existing one.

  From your description, it seems that both tables are in different basins.  Is this correct?   For example are the volumes offline?

  If this isn't the case, then it seems that everyone is alone in its own pool.  In this case, you can remove the Member failing without impacting member2.   Member1 will reset to the factory settings.

  You are running very old firmware, and I suspect maybe old firmware of drive as well.

  It is very important to follow both.  Some updates of the firmware of player prevented a premature failure.

  Kind regards

  Don

• Loss/Corruption of a Redo Log multiplex group member

  Grid infrastructure: 11.2.0.4

  DB version: 11.2.0.4

  OS: RHEL 6.5

  All recovery logs are multiplexed IE once. Copy of a mirror

  I created a document on how to cope with the loss of a member of a group of Redo Log multiplex. It applies to DBs in ASM or Linux Filesystem.

  If a member of a multiplex redo logs group is lost/damaged is in State assets or CURRENT (v$ log.status), will be the following work?

  Assuming that the DB would not crash (well that's the whole point of multiplexing)

  Step 1. Switch redo log group and bring him to the INACTIVE State IE. LGWR is not written for her now

  
  

  Step 2. Remove the Member lost/damaged.

  ALTER DATABASE DROP LOGFILE MEMBER "+ DATA_DG1/mbhsprd/onlinelog/group_1.256.834497203";

  Apparently, this command does not actually remove the log file at the level of the ASM/OS; It updates only the control file

  Step 3. If it is a corrupt then log file physically remove the damaged location ASM/OS file

  Step 4. I hope the below will create a mirror copy of the survivor

  ALTER DATABASE ADD LOGFILE MEMBER '+ DATA_DG1/mbhsprd/onlinelog/group_1.256.834497203' to GROUP 3.

  The above steps won't work?

  There is no point in writing in the document if you do not actually test what you write

  It seems that you are working with Oracle managed files. In this case:

  You will find that your "apparently" in step 2 is not correct, and that your step 4 will throw an ora-01276.