SR850 data to computer

Similar Questions

• cannot restore from the previous date says computer is unprotected I just get rid of the virus of audit system

  rid of virus check system but cannot restore the computer to the previous date

  You never said how you got rid of the "System Check" malware. As far as we know, he is still there. Follow these instructions (if you have not already done so):

  http://www.bleepingcomputer.com/virus-removal/remove-system-check
  Also, as Jose pointed out, there are programs that are designed to interfere with the system restore (Norton is one of the most common). But there are really two questions. First of all, we will treat your malware problem. We can always revisit SR at a later date.
  Finally, even once as Jose pointed out, you NEVER run the system restore after the removal of the malware! Which could only bring him back! That you have to turn it off and then put it again, which will REMOVE all previous restore points. You really all gone!

• Transfer data from computer to 8.1 Windows Vista computer

  Hello

  I get a new HP with Windows 8.1.  My old count is a Vista operating system.  How is the best way to transfer my folders/files from my old computer to my new computer?  The former backup and restoration of the news using CDs?

  Thanks for your help.

  Phil

  Hello

  Go to the file/s that you want to save and select the > then right-click on them > hover over send it to the mouse cursor > select external hard drive or Memory Stick that you have connected them to save.

  In the windows 8/8.1 machine > click File Explorer in the taskbar to bring it up > copy and paste your data in there.

  See you soon.

• data after computer crash lost desktop calendar

  My desktop computer has crashed, when I brought is back up all data in the calendar had disappeared from the office.  I tried syncing my Centro (Verizon), but the synchronization process hung up and never finished.

  I can add contact information to the phone and it syncs to the desktop and vice versa but no schedule data will go between the two.

  I'm in Palm Desktop 6.2.2 Windows XP Pro.

  I removed and re-installed Palm Desktop a couple of times and when I try syncing it ever happened step 2 of 12 - hangs up on the calendar.

  Thank you!

  Have you tried to change the timetable or agenda leads to handheld overrides desktop? Then to perform on the Treo DbFixIt then delete the base calendar data off the PC, then try to synchronize with your handheld overrides desktop.

  Message relates to: None

• Query data from computer network Analyzer RSZVB

  Hello. Sorry for the inconvenience.

  I would like to ask u about the data. I have download RSZVB example of measurement in LABVIEW on site of Rohde & Schwarz. Then, data were not included in the graph. The connection that I used is the LAN cable.

  Or find the result if you use GPIB cable?

  Had no idea.

  Need your help.

  Thank you very much.

  Zinou

  
  

• How can I download data by computer via Acrobat?

  I'm having a problem getting data from my ScanDisk to which is attached a file Acrobat information. You have a solution? Trial download & install (read-only)

  Copy the acrobat from the usb key in a desktop directory.  Open the file in the desktop directory.

• System Restore will not work for any date and computer says that it is running in auto mode.

  I have a 30 GB master and slave of 160 GB. 26/03/11 I copied a large file of 11 GB of the master to the slave because I received alerts that the disc was or almost. After you have copied from C to D, I deleted the C file and the missing file of the two drives. I tried to use the restore of the system without result. No matter what I do "Unsuccessful System Recovery" is the only message I get. Is it possible to recover a file that took me hours to compile it?

  This looks like a self-inflicted wound / pilot error.

  Deleting files in the Recycle Bin does not release disk space.  When you delete things in the trash, all you really do behind the scenes moves the items from one folder to another folder (the folder to the Recycle Bin).  They always take place until you clear items from the trash.

  System Restore won't help you recover personal files anyway - this isn't what he does.  SR cares your personal files.

  A backup will help recovery of personal files.

  I think it's against the rules for people at Microsoft to suggest or sometimes even to read all the information of any URL Internet that does not begin with microsoft.com, where the previous warning about third party programs.

  However, I think that to get off the beaten track (as they say).

  This is a popular program of third party who sometimes helps to recover accidentally deleted files:

  http://www.Piriform.com/Recuva

  It may be too late for your files, but I would also check the configuration of your trash if you have several volumes of hard drive from your symptoms question do not quite add up correctly.

  Even if SR would not help in this case, your SR expected still works what is another potential problem to solve.

  Now I'm folding stock and return things to the technical support engineers.

• I need to transfer data from multiple cells in an excel worksheet to the computer another excel worksheet.

  I have a program for the acquisition of data on computer #1 (not labview) who writes in an excel sheet to spread and I would have a line of data transferred to a different excel worksheet that runs labview (computer #2) on the same network. I would like to make this transfer of data either on the network or another method to connect these two computers (they are two feet apart). I'm not sure datasocket would help, because it seems that data to move must be written for datasocket in labview.  My other alternative is to write the drivers for the device that provides the data for computer #1. This is news to me, because the user does not want to abandon the non-labview on #1 program.

  I would write a LabVIEW VI to read Excel files on the computer n ° 1 and publish the data in a variable that is shared on the network.

• Windows 2008 Server - date maintains itself to current date

  I'm trying to test/validate a bug in a product, I am responsible, where there may be a problem in the program caused by the switch to summer time.

  I have two Windows 2008 servers (it is a client/server product, so I need two machines) and on both machines, I went in the Date/time settings and turned off the synchronization time Internet.

  I then in Date/time settings and set manually the current date of computer for 1 November 2014 - my intention is to let the daylight savings so automatic switch so I can observe the behavior of this program when the clock reached on 2 November and DST comes into play.

  On one of the servers (but only one), a few minutes after setting the date back to November 1, the date automatically resets as of today, even with the internet time sync disabled.

  On the other server it does not, and the date remains as stated.

  Can someone help explain why this could be?  I would like to get the date to stop change himself if it's possible.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Appears when logging on to the computer.

  Everytime I try to sign my computer I get this error: error loadng c: / documents & settings/owner/local settings/application data / apple computer/apple/ymkqqtz.dll the specified module would not be found RUNDLL - I don't have an apple computer and have no idea why this appears - I click on the box that says ok and she disappears - it doesn't seem to affect my computer's performance , it's just irritating it's there everytime I try to sign my computer thru AOL - Can someone help?

  Hello

  1. What is the version of the operating system that you are using?

  2. when exactly you will get this error message? While that connect to the computer or connect to AOL?

  3. have you made changes on the computer before this problem?

  If you use Windows 7 or Vista operating system, follow the steps below:

  Step 1: Check in SafeMode with network.

   

   

  You can also check if the problem persists in safe mode with network and check.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem persists even then please complete step 2.

  Step 2: Perform the clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• automatic change of files to store data

  Hello

  I have a stand-alone system that works with 7 serial ports.

  I need to store a huge amount of data (115,200 Kbaud / port) because the system must continue to work for a week.

  In two days, I have a file size of over 500Mbytes. The problem is that I'm storing the data in a .txt file and then, when I want to the process, with the data, the computer laptop can´t open a file so the size.

  I can´t find a way in which the vi can change in real-time (himself) the file to store the data.
  Maybe the way is to create 3-4 files before the while loop (in which I read the data), and then change the file in which to store the data, but I can´t find a way to do it. With the get_file_size.vi that I know when I need to change the file, but how I have to do without leaving the whole loop? In my view, necessary to ensure that the visa_read.vi works...

  maybe better or another format or way to store data?

  It does not matter of data loss while changing the file.

  Someone at - it an idea?

  Thank you

  A quick...

• Recovery of the DAQ Assistant data acquired

  Hello

  I'm currently dealing with a continuous data using NOR cDAQ-9174 proposed acquisition and recording of analog input signals of a built-in three-measuring probe.

  I built a simple vi using DAQ Assistant to acquire data and write to an output .txt - rather than .tdms using Signal Express.

  On a day 10 cycle of data acquisition computer was mistakenly turned off - leaving the empty output .txt file.  LabView recovered the VI cut and I wonder if there is a way I can access the data that has been saved by the DAQ Assistant which can be saved in temporary files etc..

  I have no idea where that might be, since you cannot delve deeper down into the 'levels' of DAQ assistant as you would a sub - vi.

  Just as a note aside to apologize my stupidity - I realize that all the data at the end of the writing task is stupid and completely avoidable... but I worked for a date limit.

  Thanks in advance for any help you can provide.

  Dan

  The most likely answer is not, unfortunately. It looks like you were a table of data at every point of the construction and then measure he writes at the end. In this case, unless you have explicitly recorded data in a temporary file, it is located right in volatile memory, waiting for you to do something with it.

  I realize that this isn't what you want to hear, as it comes to the time of submission of draft / year...

  If you post your VI (preferably version LV2012 or below), I can have a look to see if there is anything obvious.

• IPod Touch App data files are saved by the XP system restore?

  I lost the data files for the applications on my iPod Touch after a BSOD on XP so that the update to iTunes.

  "Restore from backup" in iTunes restores only the empty files, due to him having a synchronization since the failure (iTunes replaces its unique to each sync backup file), so I'm now scrambling for an alternative.

  What seems to offer the best chance is to do a system restore XP from a restore before the BSOD Point - but I don't know if the Restore Point contains a version of the iPod data files, which are stored in the hidden folder C:\\Documents and Settings\ (username) \Application Data\Apple Computer\MobileSync\Backup.

  I found a note saying: the XP System Restore saves nothing of My Documents, but wonder if it means really nothing is recorded in Documents and Settings...

  Can someone enlighten me as to the probability of the iPod Touch App data being in a Restore Point, please?

  Hi BrianCrabtree,

  I suggest you to send your request to apple support because the problem is with IPod touch applications.

  Link: http://discussions.apple.com/category.jspa?categoryID=201

  You can also check out: iPhone and iPod touch: about backups: http://support.apple.com/kb/ht1766

• How to transfer data to my Tablet xpod caramel

  How to transfer data from computer to xpod? No establishing connection does not, when connecting xpod with data cable computer show ANORID in (fax and printer) with pilot error. I try to fix it with the update, but it does not work.

  also SD memory card not visible in the file xpod but Manager show the State of memory in STORAGE in settings. and how do I transfer data from xpod sd card.
   

  Hello

  Thanks to community Microsoft can help you with you about Windows!

  I see that you are facing problems with xpod.

  You will need to contact xpod for assistance.

  If you need help on Windows please keep us informed.

  We will be happy to help you!

• This windows 7 original date Exchange installation after a system recovery

  I bought an acer return note two years back the 12-12-2009

  juice checked my os installation date using command with following command
    SystemInfo | find/i «date installation»
  
  
  and it shows the original; installation date 24-04-2011
  I wonder how that s right? because I m use since 2009 with the same operating system that came with my pre-installed system
  But wait a minute, now I remember that I restored my OS a bit a year ago
  the fact that restoring changed my original installation date? /
  and if again recover my system today say 28/09/2012, once again the original installation date he's be changed to 28/09/2012. right?

  Hello

  Yes indeed - a system restore resets the installation date that he "re-install" windows.
  So you have reason - stored for windows installation date is the date of installation or the last system restore.

  For the first date of computer installation, I guess it should be difficult, if not impossible, to find when it was restored etc.

  Kind regards

  Joel