SRM protection associations invalidated if have the discs and tapes replicates of the same volume

Replication to disk via snapmirror (Netapp / IBM Nseries) and replicating also on tape.  SRM protection associations are invalidated because automatic scan of the data store is replicated volumes and ignores those with multiple targets.  Receive messages as follows.  Any ideas how to fix or work around this problem?  Thank you.

NFS01_REPL has a/flight/rst1a of replica of volume

NFS01_REPL has a/flight/NFS01_REPL_DR of replica of volume

Jump/flight/NFS01_REPL way she has several counterparts

Having just went on all the documentation on the NetApp SRA, I think that what you're describing is an unsupported configuration.  SRA 1.4 Installation Guide, troubleshooting...

Jump nfs_path way she has several counterparts

Message to jump nfs_path path because it has several counterparts

Log level - quiet

Export NFS, which have been reproduced many times is not currently supported.

Cause - corrective measures to ensure that the concerned exporting NFS only has a single equal replication.

Tim Oudin

Tags: VMware

Similar Questions

  • Why would I have a queue in two different vi generate a sepearte refnum, if they have the same name?

    Hello world!

    I have a producer consumer configuration, where the producer and the consumer are in sepearte vi.  They have the same name, but do not communicate their existence to the other for getting queue function.  Therefore, only one is valid, the other ends up invalid.  If I check the renum for each loop, they are different.  Assumptions?

    Destory queue has been wired for real in the Subvi, force to destroy the queues.  Thus, the queue was invalidated and then recreated in the other vi.

  • I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

    I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

    Hi MartinWithWindowsIssues,

    Welcome to the Microsoft Vista answers Forum!

    I have some steps that may help you.

    Step 1

    Try resetting the component of windows update.

    To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Step 2

    Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

    To do this, follow the steps below:

    1. click on the Start button

    2. on the Start Menu, click all programs followed by accessories

    3. in the menu accessories, right-click on command line option

    4. in the drop-down menu that appears, click the "Run as Administrator" option

    5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

    6. in the command prompt window, type: sfc/scannow then press enter

    7. a message is displayed to indicate that "the analysis of the system will start.

    8. be patient because the analysis may take some time

    9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

    10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

    11. once the scan is finished, close the command prompt window, restart the computer and check.

    For more information, see the link below:

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

    http://support.Microsoft.com/kb/936212

    Hope the helps of information. Please post back and we do know.

    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • All the program icons have the same appearance and open Windows Media Center

    Original title: cannot start a program
    When I click on an any program icon on the Windows 7 Desktop, a window appears with its contents: suggested program to open Windows Media Center. All the programs on the desktop icons have the same appearance.

    Using Word 2007 to get an example:

    I've seen this happen when opening a program via a shortcut on the desktop (for example. LNK file), you are asked what type of program to open it with. After you select theWord (or another program) via the Select a program from a list of programs installedand checkalways use the selected program to open this type of file, the referenced by the shortcut of origin Word document opens in Word as it should.

    The problem is that now all shortcuts (for example. LNK files) on the desktop or in the Explorer will want to be opened by Word and use Word icon to display the shortcut. This is known as a file association and the default icon. The same condition can occur if you have performed these actions on one. JPG or even a. EXE, but the. LNK explanation is much more likely.

    This has happened enough that a small utility was written to cancel the. LNK file association was created. There is a registry hack to do this, but I recommend the utility unLNK for its ease of use.

    A utility to Unassociate Types of files in Windows 7 and Vista
    http://www.Winhelponline.com/articles/231/1/an-utility-to-unassociate-file-types-in-Windows-7-and-Vista.html

    Just use the utility to unassociate the. LNK files. Operating instructions are available on the web page above (the same place to get the utility).

    • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.
  • It cannot open any programs they all have the same icon on the desktop and start programs... why?

    All of the icons on the desktop and on the start menu have the same icon and will not open... I have new sony computer with windows 7... I tried to move music to a file to burn a cd, he asked what program I should use to open them have all records have the same program and open the habit... I don't run a virus, malware, none of the infected files.

    Hello

    You did changes to the computer before the show?

    Method 1
    I suggest you try the steps from the following link:

    When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
    http://support.Microsoft.com/kb/950505

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

    Method 2
    The issue could be due to the virus on the computer. I suggest you run virus scanner online by using the Microsoft safety scanner.

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  • How to get the text have the same effect as the video?

    Hello

    For the first time post here, but I wonder how to get the text of the titles have the same effect as the video behind her.

    For my video, I use 'bad tv' and other effects such as Gaussian that obviously changes the appearance of video, creating the look of VHS. However, I then inserted text via the title, but it normally appears. How can I make this text have the same effects as the video behind it?

    A friend told me I might need to add text to the video first, then do the effects, I have not tried, but wonder if there is an easier way, as this would require me to restart.

    EDIT: That's what I'm looking for. https://youtu.be/7_2PHQI89dI?t=24s The text has the same effect as the video.

    Thank you

    One way is to create a clip made up based on the title and the original clip. Then apply the effect.

    Another way is to use an adjustment layer.

    Good luck.

    Russ

  • I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

    I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

    You know the e-mail password what do you use? I lost over $ 30 on my old Apple ID because I couldn't get into the email and apple would not transfer my money to my new account.

  • Two iPhones, will have the same content

    Two iPhones, it will have the same content, like NOTES, FB, WHATSAPP AND YAHOO MAIL?

    I am worried because my friend is using my old iPhone and it can receive notifications the same as what I get.

    If you distributed or sold your phone to your friend, you should follow the steps here before releasing the device. If you did, you have no worries.

    What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  • RE: Installed detachment "access denied." I have the same problem and none of the above worked. The property is empty, but demand will not accept me.

    RE: "access denied" following the installation of Firefox question. I have the same problem. Details below: I tried opening in Mode safe that has not worked. I have administrative access. When I click on the general tab in properties, I get a message that there is no such thing as "firefox.exe". This file, or any other type 'install' file appears in the directory Mozilla Firefox with the exception of 'uninstall '. I downloaded and tried to install seven times from six different sources, including Mozilla, all with the same results. I also tried a number of solutions on the web for this error without great success. I tried, first of all, to make an upgrade, then remove the old version of Firefox and have been 'install' since then. Avast, Malwarebytes and Threatfire found no malware.

    I've never had a similar problem with Firefox before and I used it for years. Anyone has any ideas that I have not already tried? I'm tired of using Internet Explorer! RE: Troubleshooting below - information Windown will not open the downloaded file.

    arwade said

    I downloaded Firefox on seven different sites

    Please download the full installer ONLY of Mozilla.org.
    Download Firefox full installation for all systems and languages {web link}

  • My husband and I have the same phone.  We see the two of you on each of our phones calls him, and that missed us a call from (the phone number is in red when it's a missed call).  Thanks for your help.

    My husband and I have the same phone.  We see them entering and fact phone outgoing calls and missed calls (phone # is in red) from the other phone.  Thank you for your help.

    This happens when you both share the same Apple ID. It is recommended - for a number of reasons - that each have their own Apple ID and then uses the sharing of the family for things you want to share. http://www.Apple.com/icloud/family-sharing/

  • Why my iPhone has a capacity lower than my iPad when they have the same amount of storage?

    Why my iPhone has less capacity (storage wise) than my iPad when they both have the same amount of storage?  My pictures takes up to 7.2 GB on my iPhone with only 700 pictures & my iPad takes up to 4.0 GB with more than 1,000?

    Check the settings of your devices to the settings > Photos & camera > iCloud photo library > do you both value library optimized? If NOT, this is your answer. If YES, then the size of the local library is adjusted based how much space you have, if you change or display more than full resolution images on a device, than another, on what device the photos were taken, etc.

  • HP model 15-1039wm: I have the same question to enter the password administrator or power on password.

    I have the same problem enter password administrator or power on password. Disable the 68253840 code shows. I tried to participate get the battery cmos as suggested on other Web sites, but it's hard to disassemble. I used the enemy months laptop then use more than a week and now this message. .

    Hello:

    Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

    http://h30434.www3.HP.com/T5/notebook-operating-Sy...

  • On March 28, my ipad 2 use osi 9.2.1 air would not allow internet browsing so I updated to 9.3... I always have the same question. Any advice?

    On March 28, my ipad 2 use osi 9.2.1 air would not allow internet browsing so I updated to 9.3... I always have the same question. Any advice?

    Unfortunately, this is a common problem.

    Try turning off JavaScript under settings - Safari - Advanced.

    You can find more information at the link:

    For those having issues with the iOS 9.3 update please read...

    New construction of iOS with the latest bugfixes 9.3 is now available for download

  • I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in one class. How to unlock my password. Carol in English

    I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in ONE class. How to unlock my login and my password, so that I can use it for all classes. Carol in English

    "Remember Me" for the site connections automatically when you return to the Web site is done with a Cookie the site in Firefox.

    Try to clear your Cookies for this Web site.

    Tools > Options-> life privacy - Cookies = the button show Cookies.

    You must use the custom settings for history at the top of this tab to see the View the Cookies button.

    Enter the domain name in the top search bar and all Cookies for this URL will be displayed. Unless you can figure out which is Cookie to "remember me", you will need to delete them all.

    Hold the {Ctrl} key while you click each Cookie in the small window. When this list is all highlighted, click the Cookie delete button at the bottom left.
    When you are finished click Close.

  • How is the new warnings to date have the same version as the oldest?

    I got an email about new updates to my PC. In any case I noticed that I think that all or certain updates have the same version as the previous drivers.

    So why is it?

    Hello

    Is the update also the same thing? In any case, if your device works Scott it is not useless to put anything.

    It will also be interesting to know what model of laptop you have and updates are available.

Maybe you are looking for

  • Instant ink: printing of invoices for instant ink

    I was told I can print my invoices to instant ink in my home page activity tab but there is no optino to print, I also looked on the shipping & billing tab and is not there either, please help?

  • Error 0x800B0100

    Hi all I install a suite of Nokia on my pc. My PC is windows xp sp 3. Whenever I try to install the file system on nokia gives error 'Problem with the Setup file' error code 0x800B0100.  Pls help to solve the problem

  • I didn't even not an error code. I click on the inside of the link, email, and nothing happens__

    If I go to Rogers email and click the link, it opens.  But Outlook Express will not respond.

  • event minimized

    is there an event when your application is reduced to a minimum and when it is open again, after it has been minimized? onExposed() he does not because he is not called right after that you open the application to be reduced to a minimum.

  • Smartphones blackBerry 8310 and 8110 "attempted to access the network.

    Good day to all. In my application I m send and receive sms. It works very well in 8110 but in the 8310, while sending or receipt of the msg it always ask authorization "the appl." XYZ "has attempted to access the network. You want to allow this? "