SSH specific IP access
Hello
I have configured 10 interface vlan on my cisco 6509 switch.
However, I want my SSH users on IP management only. SSH access on other PIS (defined for each interface vlan) should be blocked by the switch.
Please suggest how to configure it.
Thanks in advance.
The best way to achieve this is to bind an access list to your vty line. This access list is normally a standard ACL, but this time you use an extended ACL that uses your IP management as a destination:
EDIT: No, it doesn't work as proposed. Please see the other posts.
MGMT-TRAFFIC extended IP access list
permit tcp SOURCE-NET host 10.10.10.10 eq 22
line vty 0 4
access-class MGMT-TRAFFIC
In this example, SOURCE-NET is the IP network hence your traffic management comes and 10.10.10.10 is managing IP on your device.
Tags: Cisco Security
Similar Questions
-
SSH and Telnet access for catalyst 4503 list
I was wondering the structure of command to apply an access list to ssh and telnet on a catalyst 4503. I keep a list of access for indoors and outdoors. Can afford two different IPs from the outside? Thank you
You will need create an access list indicating the networks/hosts that you want to allow.
-Example
access-list 10 permit 10.10.1.10
access-list 10 permit 10.10.2.10
access-list 10 permit 127.1.0.0 0.0.255.255
access-list 10 permit 192.168.1.0 0.0.0.255
So you want to put this list of access on the VTY interfaces.
-Example
line vty 0 4
access-class 10
entry ssh transport * if you only want to SSH *.
line vty 5 15
access-class 10
entry ssh transport * Ditto *.
Now you can do all this with * line vty 0 15 * but, it gives you a better idea of what is happening. It is a simplistic configuration. Remember that it is advisable not to allow ssh. If you want to allow at the same time, let him * transport input ssh * out of the configuration.
I hope that gives you an idea of the structure. If this is not the case, let me know.
-
SSH session gets ACCESS denied
Try to connect to a Putty session and I get access denied for the ROOT user and any other user. I can connect to this host with the VI client and create a new user, but the user also gets access denied. I can connect via web browser and simply not the SSH session. I'm unable to connect to the console from the keyboard is unplugged. Are there other options before that I have to restart? Any help is appreicated.
Have a look here, to allow ROOT to log in: http://itknowledgeexchange.techtarget.com/virtualization-pro/how-to-allow-the-root-user-to-login-to-vmware-esx-server-with-ssh/
Also ensure that server SSH is running:
service sshd status
If this is not the case, start it:
service sshd start
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
Is there a way to query users for specific api access on app download?
For example, we need access to net_rim_bbapi_phone in a part of our application. Currently, the application prompts the user for access... unless the user has enough foresight to check "Set application permissions" before downloading and then comes to allow access to bbapi_phone by default.
Would be nice if we could draw the attention of the specifcially from the user to the fact that we need access to net_rim_bbapi_phone to download.
You can use the ApplicationPermissions and ApplicationPermissionsManager classes to allow your application to request the settings as needed. For an example, take a look at the applicationspermissionsdemo provided with the BlackBerry JDE.
-
Telnet/ssh/http remote access LWAP CLI
All the:
Is it possible to remotely connect to the wired interface to a LWAP?
Here is why I ask:
Passing 5508 controller (7.4.110.0) installation a colo to the subnet to another and changing controller in the process.
Can I use the cmd IOS: time "reload in X" or "recharge at X time" on the LWAPs?
Is there a better way to do what I didn't think?
About 120 LWAPs involved in a fairly large geographical area - time of 3 hours by car.
THX,
Phil
I guess the question of reading the post, is what you're doing? We assume you will the WLC to another subnet and the IP address will change. If this is the case, it depends on how comfortable you are with the command-line if you don't not WCS/NCS or the first to get templates.
In general, I would like to change the AP on AP to point primary school at the new address IP WLC, even if she is not yet up and enter the secondary WLC as one that is already in place. I did it with more than 200 AP if you would not do this, then the easiest is just to use DNS and resolve cisco-capwap-controller. the new IP address of the WLC. You can use option 43, but you must assign this right. Once your APs is moved, then I usually remove the DNS and option 43 if I put those.
Sent by Cisco Support technique iPhone App
-
I can not access our ASA 5505 over SSH from outside. I set this through the ASDM to allow SSH (device management > access management > ASDM, HTTPS, Telnet, SSH). I have added a rule that allows the SSH on the external interface 0.0.0.0 0.0.0.0. When I try to ssh with putty, he says 'network connection closed unexpectedly server' when I look at the logs on the ASA, it shows a Built inbound TCP connection on port 22, but then immediately a disassembly TCP connection. It does not show that it is blocked by any rule. Is there something that I am missing about the SSH activation?
Thank you
Scott
Hello
In addition to the hosts permitted to SSH for the SAA, you must set the RSA keys for the secure connection.
In the CLI:
generate encryption rsa key
For these keys to work, you should have a name of host/domain configured on the SAA so name (unless you configure a dedicated RSA keys).
So basically, configure a host name, domain name and generate the RSA key pair:
hostname NAME_OF_ASA
NAME_OF_DOMAIN domain name
generate encryption rsa key
Accept the default of 1024 and it should work.
Federico.
-
How to force the client to connect to the specific access point?
I have a client that connects to an Access Point to the upper floor. The connection is "Very low" and pings are restless. Is there a way to force the client to connect to the point of access on its own soil in the hallway.
Access Points using 1131AG; WLC2106
PSK + WPA2
Thank you
There is not a way to force the client to use a specific side access point controller of things. According to the specifications, the client decides when and where to associate. You can try to disable some of the rates below data or lower power tx of the AP to reduce the coverage of each access point cell. By doing this, the client cannot see the other as favourable AP.
-
Esxi SSH access and locking mode
If SSH Busybox shell access has been disabled, is there a point to activate the lock mode?
Thank you in advance.
While you can have SSH access disabled, vCLI remote access and access PowerCLI is still possible, unless the lock mode is activated.
If you enable the lock mode, all remote management of the ESXi hosts (whether you use vSphere Client, vCLI/vMA or PowerCLI) must firstly be connected via vSphere server.
I hope this helps.
-
No SSH access after upgrade to vSphere 4.1
Hi all
Just updated my test environment to vSphere 4.1. Everything seems to work, but when I tried to log in using putty (ssh), I got "access denied" on the user account created specially for this purpose. After connecting the host directly using the VI client, I see users "vmware" sitting there. "Grant shell access to this user" is marked. I tried to reset the password, use a more complex password, created another (vmware2) user with shell access enabled. Nothing helps. I have connection using PuTTY and receive "access denied", as if the account does not have access via SSH.
I have no easy option for now to log on to the console directly, so I can't enable root access for now as well.
Has anyone seen this?
Visit my blog at http://www.vmdamentals.comHi all
It comes to the design change in ESX 4.1. According to the design of new power users only for the Service Console and VMkernel directors can connect to the console using ssh. Users without these privileges cannot connect you to the Service Console.
The same is captured in the documentation. Please check the "Note" in section "Considerations on the upgrade of the post" Upgrade Guide (http://www.vmware.com/pdf/vsphere4/r41/vsp_41_upgrade_guide.pdf).
Snip of the Document: -.
< snip >
NOTE after the upgrade to ESX 4.1, only the user administrator has access to the service console. To grant
Access service console to other users after upgrade to envisage to grant administrator permissions for
other users.
< / snip >
-
Problems with NAT? Can't access internet from inside the network?
I was intrigued with this problem for a few days now. I'm stuck on what could be the issue. The problem is that I can ping my router, G0/0 and G0/1, to the internet. However, since the switch and my PC, I can not ping Internet. I'm sure that everything is configured correctly, but here is my setup for the switch and the router:
Router 1:
version 15.1
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname LAN_Router_1
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 *.
!
No aaa new-model
!
no location network-clock-participate 3
!
dot11 syslog
no ip source route
!
IP cef
!
!
!
!
domain IP MyTestLab.com
8.8.8.8 IP name-server
IP-server names 8.8.4.4
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
voice-card 0
!
!
!
!
!
!
!
Crypto pki token removal timeout default 0
!
!
!
!
license udi pid CISCO3845-MB sn FOC105013BA
username * secret privilege 15 5 *.
!
redundancy
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
!
!
!
!
!
!
interface Loopback0
192.168.254.1 IP 255.255.255.255
!
interface GigabitEthernet0/0
DHCP IP address
penetration of the IP stream
stream IP output
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
media type rj45
!
interface GigabitEthernet0/1
the IP 192.168.0.1 255.255.255.248
penetration of the IP stream
stream IP output
IP nat inside
IP virtual-reassembly in
GLBP 100 ip 192.168.0.4
priority GLBP 100 115
GLBP 100 preempt
automatic duplex
automatic speed
media type rj45
!
ospf Router 5
router ID - 192.168.254.1
network 192.168.0.1 0.0.0.0 area 1
192.168.254.1 network 0.0.0.0 area 0
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
IP nat inside source list 10 interface GigabitEthernet0/0 overload
IP route 0.0.0.0 0.0.0.0 dhcp
!
access-list 10 permit 192.168.94.32 0.0.0.15 connect
access-list 10 permit 192.168.17.0 connect 0.0.0.7
access-list 10 permit 192.168.52.0 connect 0.0.0.7
access-list 10 permit 192.168.0.0 0.0.0.7 connect
access-list 10 deny any newspaper
!
!
!
!
!
!
control plan
!
!
!
!profile MGCP default
!
!
!
!
!
connection of the banner ^ C
W A R N I N GTHIS IS A PRIVATE COMPUTER SYSTEM.
This computer system, including all related equipment, network devices
(specifically including Internet access), are provided only for
authorized used.All computer systems may be monitored for all lawful, including purpose
to ensure that their use is authorized, for management of the system, to
facilitate protection against unauthorized access, and to verify security
survival and operational security procedures.Monitoring includes active attacks by authorized personnel and their
entities to test or verify the security of the system. During the surveillance,.
information may be examined, recorded, copied and used for authorized
purposes.All information, including personal information, placed on or sent over
This system may be monitored. Uses of this system, authorized or
unauthorized, constitutes consent to monitoring of this system.Unauthorized use may subject you to criminal prosecution. Evidence of
any unauthorized use collected during monitoring may be used for
administrative, criminal or other adverse action. Use of this system
constitutes a consent to monitoring for these purposes.
^ C
!
Line con 0
Synchronous recording
local connection
line to 0
line vty 0
local connection
entry ssh transport
output transport ssh
line vty 1 4
opening of session
transport of entry all
!
Scheduler allocate 20000 1000
NTP 198.60.73.8 Server
NTP 13.85.70.43 Server
SaveRunConfig event manager applet
cron cron-event timer entry ' 0 0 * * ".
command action 1.0 cli 'enable '.
cli 2.0 action command "RAM".Router 2:
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname LAN_Router_2
!
boot-start-marker
boot-end-marker
!
!
! card order type necessary for slot 1
Monitor logging warnings
enable secret 5 *.
!
No aaa new-model
!
clock timezone CST - 5 0
!
dot11 syslog
IP source-route
!
IP cef
!
!
!
!
domain IP MyTestLab.com
8.8.8.8 IP name-server
IP-server names 8.8.4.4
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
type of parameter-card inspect global
Select a dropped packet newspapers
!
voice-card 0
!
!
!
!
!
!
!
Crypto pki token removal timeout default 0
!
!
!
!
license udi pid CISCO3845-MB sn FOC1411592J
username * secret 5 *.!
redundancy
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
!
!
!
!
!
!
interface Loopback0
192.168.254.2 the IP 255.255.255.255
!
interface GigabitEthernet0/0
DHCP IP address
penetration of the IP stream
stream IP output
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
media type rj45
!
interface GigabitEthernet0/1
IP 192.168.0.2 255.255.255.248
penetration of the IP stream
stream IP output
IP nat inside
IP virtual-reassembly in
GLBP 100 ip 192.168.0.4
priority GLBP 100 110
automatic duplex
automatic speed
media type rj45
!
ospf Router 5
router ID - 192.168.254.2
network 192.168.0.2 0.0.0.0 area 1
0.0.0.0 network 192.168.254.2 area 0
!
Default IP gateway 192.168.0.1
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
IP nat inside source list 10 interface GigabitEthernet0/0 overload
IP route 0.0.0.0 0.0.0.0 dhcp
!
SSH extended IP access list
permit tcp host 192.168.52.2 any eq 22 log
permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
permit tcp host 192.168.17.18 any eq 22 log
any eq 22 host tcp 192.168.0.1 newspaper permit
permit tcp host 192.168.0.2 any eq 22 log
permit tcp host 192.168.0.3 any eq 22 log
permit tcp host 192.168.0.5 any eq 22 log
denyip a session
!
access-list 10 permit 192.168.94.32 0.0.0.15 connect
access-list 10 permit 192.168.17.0 connect 0.0.0.7
access-list 10 permit 192.168.52.0 connect 0.0.0.7
access-list 10 permit 192.168.0.0 0.0.0.7 connect
access-list 10 deny any newspaper
!
!
!
!
!
!
control plan
!
!
!
!
profile MGCP default
!
!
!
!
!
connection of the banner ^ C
W A R N I N GTHIS IS A PRIVATE COMPUTER SYSTEM.
This computer system, including all related equipment, network devices
(specifically including Internet access), are provided only for
authorized used.All computer systems may be monitored for all lawful, including purpose
to ensure that their use is authorized, for management of the system, to
facilitate protection against unauthorized access, and to verify security
survival and operational security procedures.Monitoring includes active attacks by authorized personnel and their
entities to test or verify the security of the system. During the surveillance,.
information may be examined, recorded, copied and used for authorized
purposes.All information, including personal information, placed on or sent over
This system may be monitored. Uses of this system, authorized or
unauthorized, constitutes consent to monitoring of this system.Unauthorized use may subject you to criminal prosecution. Evidence of
any unauthorized use collected during monitoring may be used for
administrative, criminal or other adverse action. Use of this system
constitutes a consent to monitoring for these purposes.
^ C
!
Line con 0
session-timeout 360
exec-timeout 360 0
7 password *.
Synchronous recording
local connection
line to 0
opening of session
line vty 0 4
SSH access class in
Synchronous recording
local connection
entry ssh transport
output transport ssh
!
Scheduler allocate 20000 1000
NTP 198.60.73.8 Server
NTP 13.85.70.43 Server
SaveRunConfig event manager applet
cron cron-event timer entry ' 0 0 * * ".
command action 1.0 cli 'enable '.
cli 2.0 action command "RAM".Switch:
version 12.2
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug uptime
Log service timestamps uptime
encryption password service
!
hostname LAN_Switch
!
boot-start-marker
boot-end-marker
!
!
username * secret privilege 15 5 *.
!
!
!
No aaa new-model
clock timezone CST - 6
1 supply ws-c3750-24ts switch
mtu 1500 routing system
IP routing
IP - domain name MyTestLab.com
8.8.8.8 IP name-server
IP-server names 8.8.4.4
!
!
!
!
!
!
!
!
!
spanning tree mode rapid pvst
spanning tree logging
spanning tree extend id-system
!
internal allocation policy of VLAN ascendant
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
interface Loopback0
192.168.254.5 the IP 255.255.255.255
!
interface FastEthernet1/0/1
switchport access vlan 17
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/2
switchport access vlan 10
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/3
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/4
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/5
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/6
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/7
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/8
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/9
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/10
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/11
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/12
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/13
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/14
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/15
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/16
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/17
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/18
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/19
Description # PC #.
switchport access vlan 10
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/20
Description # X_BOX #.
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/21
switchport access vlan 94
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/22
switchport access vlan 5
switchport mode access
!
interface FastEthernet1/0/23
switchport access vlan 5
switchport mode access
!
interface FastEthernet1/0/24
switchport access vlan 5
switchport mode access
!
GigabitEthernet1/0/1 interface
switchport access vlan 666
Shutdown
!
interface GigabitEthernet1/0/2
switchport access vlan 666
Shutdown
!
interface Vlan1
no ip address
Shutdown
!
interface Vlan5
IP 192.168.0.5 255.255.255.248
!
interface Vlan10
address 192.168.10.2 255.255.255.0
!
interface Vlan17
IP 192.168.17.17 255.255.255.248
!
interface Vlan52
IP 192.168.52.1 255.255.255.248
!
interface Vlan94
IP 192.168.94.33 255.255.255.240
!
ospf Router 5
router ID - 192.168.254.5
Log-adjacency-changes
network 192.168.0.5 0.0.0.0 area 1
network 192.168.10.2 0.0.0.0 area 2
network 192.168.17.17 0.0.0.0 area 2
network 192.168.52.1 0.0.0.0 area 2
network 192.168.94.33 0.0.0.0 area 2
0.0.0.0 network 192.168.254.5 area 0
!
IP classless
IP route 0.0.0.0 0.0.0.0 192.168.0.4 permanent
no ip address of the http server
no ip http secure server
!
!
SSH_IN extended IP access list
permit tcp host 192.168.52.2 any eq 22 log
permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
permit tcp host 192.168.17.18 any eq 22 log
any eq 22 host tcp 192.168.0.1 newspaper permit
permit tcp host 192.168.0.2 any eq 22 log
permit tcp host 192.168.0.3 any eq 22 log
permit tcp host 192.168.0.5 any eq 22 log
deny ip any any newspaper
!
!
connection of the banner ^ C
W A R N I N G
THIS IS A PRIVATE COMPUTER SYSTEM.
This computer system, including all related equipment, network devices
(specifically including Internet access), are provided only for
authorized used.
All computer systems may be monitored for all lawful, including purpose
to ensure that their use is authorized, for management of the system, to
facilitate protection against unauthorized access, and to verify security
survival and operational security procedures.
Monitoring includes active attacks by authorized personnel and their
entities to test or verify the security of the system. During the surveillance,.
information may be examined, recorded, copied and used for authorized
purposes.
All information, including personal information, placed on or sent over
This system may be monitored. Uses of this system, authorized or
unauthorized, constitutes consent to monitoring of this system.
Unauthorized use may subject you to criminal prosecution. Evidence of
any unauthorized use collected during monitoring may be used for
administrative, criminal or other adverse action. Use of this system
constitutes a consent to monitoring for these purposes.
^ C
!
Line con 0
session-timeout 60
exec-timeout 60 0
Synchronous recording
local connection
line vty 0
access-class SSH_IN in
local connection
line vty 1 4
access-class SSH_IN in
opening of session
line vty 5 15
access-class SSH_IN in
opening of session
!
NTP 198.60.73.8 Server
Event Manager environment suspend_ports_config flash: / susp_ports.dat
Event Manager environment suspend_ports_days 7
Event Manager user Directorystrategie "flash: / policies /.
Event manager session cli username "stw".
political event manager sl_suspend_ports.tcl
political event manager tm_suspend_ports.tcl
SaveRunConfig event manager applet
cron cron-event timer entry ' 0 0 * * ".
command action 1.0 cli 'enable '.
cli 2.0 action command "RAM".Well, I totally forgot the keyword "log" and NAT:
Cisco IOS NAT support ACLs with a keyword "log"?
A. When you configure Cisco IOS NAT translation dynamic NAT, an ACL is used to identify the packages that can be translated. The current NAT architecture does not support the ACL with a keyword "log".
http://www.Cisco.com/c/en/us/support/docs/IP/network-address-translation...
If your problem is not the mask with joker, but the command "log"...
-
Can't access secondary VPN client subnet
Please can someone help with the following: I have an ASA 5510 performer v8.4 9 (3) and setup a remote user VPN using the v5.0.07.0410 of customer Cisco VPN which is working apart from the fact that I can not access resources on secondary subnet.
The configuration is the following:
ASA inside the interface on 192.168.10.240
VPN clients on 192.168.254.x
I can access reources on the 192.168.10 subnet but not no matter what other subnets internally, I need to specifically allow access to the 192.168.20 subnet, but I cannot figure out how to do advise please, the config is lower to: -.
Output from the command: 'show startup-config '.
!
ASA 3,0000 Version 9
!
blank host name
domain nameactivate the encrypted password
encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif outside
security-level 0
IP 255.255.255.224
!
interface Ethernet0/1
nameif inside
security-level 100
IP 192.168.10.240 255.255.255.0
!
interface Ethernet0/2
nameif DMZ
security-level 50
IP 10.10.10.253 255.255.255.0
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
boot system Disk0: / asa843-9 - k8.bin
boot system Disk0: / asa823 - k8.bin
passive FTP mode
clock timezone GMT/UTC 0
summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
Server name 194.168.4.123
Server name 194.168.8.123
domain nifcoeu.com
network object obj - 192.168.0.0
192.168.0.0 subnet 255.255.255.0
network object obj - 192.168.5.0
192.168.5.0 subnet 255.255.255.0
network object obj - 192.168.10.0
192.168.10.0 subnet 255.255.255.0
network object obj - 192.168.100.0
255.255.255.0 subnet 192.168.100.0
network object obj - 192.168.254.0
192.168.254.0 subnet 255.255.255.0
network object obj - 192.168.20.1
Host 192.168.20.1
network obj_any object
subnet 0.0.0.0 0.0.0.0
network obj_any-01 object
subnet 0.0.0.0 0.0.0.0
network object obj - 0.0.0.0
host 0.0.0.0
object network obj_any-02
subnet 0.0.0.0 0.0.0.0
network object obj - 10.10.10.1
host 10.10.10.1
obj_any-03 network object
subnet 0.0.0.0 0.0.0.0
object network obj_any-04
subnet 0.0.0.0 0.0.0.0
object network obj_any-05
subnet 0.0.0.0 0.0.0.0
network of the NS1000_EXT object
Home 80.4.146.133
network of the NS1000_INT object
Host 192.168.20.1
network of the SIP_REGISTRAR object
Home 83.245.6.81
service of the SIP_INIT_TCP object
SIP, service tcp destination eq
service of the SIP_INIT_UDP object
SIP, service udp destination eq
network of the NS1000_DSP object
192.168.20.2 home
network of the SIP_VOICE_CHANNEL object
Home 83.245.6.82
service of the DSP_UDP object
destination udp 6000 40000 service range
service of the DSP_TCP object
destination tcp 6000 40000 service range
network 20_range_subnet object
subnet 192.168.20.0 255.255.255.0
subnet of voice Description
network 25_range_Subnet object
255.255.255.0 subnet 192.168.25.0
PC devices customer Description VLAN 25
the ISP_NAT object-group network
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service SIP_INIT tcp - udp
port-object eq sip
object-group service DSP_TCP_UDP tcp - udp
6000-40000 object-port Beach
permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.254.0 255.255.255.0
inside_nat0_outbound list extended access allowed object 20_range_subnet 192.168.254.0 ip 255.255.255.0
standard VPN_splitTunnelAcl-Remote Access-list allowed 192.168.10.0 255.255.255.0
standard VPN_splitTunnelAcl-Remote Access-list allowed 192.168.20.0 255.255.255.0
access-list 100 extended allow object object-group TCPUDP object SIP_REGISTRAR NS1000_INT SIP_INIT object-group
access-list 100 extended allow object object-group TCPUDP object SIP_VOICE_CHANNEL NS1000_DSP DSP_TCP_UDP object-group
access-list extended 100 permit ip 62.255.171.0 255.255.255.224 all
access-list 100 extended allow icmp from any echo-answer idle
access-list extended 100 permit icmp any one has exceeded the idle time
access-list extended 100 allow all unreachable icmp inactive
access-list extended 100 permit tcp any host 10.10.10.1 eq ftp
access-list extended 100 permit tcp any host 10.10.10.1 eq ftp - data
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
192.168.254.1 mask - local 192.168.254.254 pool Pool VPN IP 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 647.bin
enable ASDM history
ARP timeout 14400
NAT (inside, all) source static obj - 192.168.0.0 obj - 192.168.0.0 destination static obj - 192.168.5.0 obj - 192.168.5.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.100.0 obj - 192.168.100.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.254.0 obj - 192.168.254.0 no-proxy-arp-search to itinerary
NAT (exterior, Interior) static source SIP_REGISTRAR destination interface static NS1000_INT service SIP_INIT_TCP SIP_INIT_TCP SIP_REGISTRAR
NAT (exterior, Interior) static source SIP_REGISTRAR destination interface static NS1000_INT service SIP_INIT_UDP SIP_INIT_UDP SIP_REGISTRAR
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
network obj_any-01 object
NAT (inside, outside) dynamic obj - 0.0.0.0
object network obj_any-02
NAT (inside DMZ) dynamic obj - 0.0.0.0
network object obj - 10.10.10.1
NAT (DMZ, outside) static 80.4.146.134
obj_any-03 network object
NAT (DMZ, outside) dynamic obj - 0.0.0.0
object network obj_any-04
NAT (management, outside) dynamic obj - 0.0.0.0
object network obj_any-05
NAT (management, DMZ) dynamic obj - 0.0.0.0
Access-group 100 in external interface
Route outside 0.0.0.0 0.0.0.0 80.4.146.129 1
Route inside 192.168.20.0 255.255.255.0 192.168.10.254 1
Route inside 192.168.25.0 255.255.255.0 192.168.10.254 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.10.0 255.255.255.0 inside
http 192.168.25.0 255.255.255.0 inside
http 62.255.171.0 255.255.255.224 outside
http 192.168.254.0 255.255.255.0 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN =Configure CRL
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
string encryption ca ASDM_TrustPoint0 certificates
certificate 2f0e024dquit smoking
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491quit smoking
crypto isakmp identity address
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.1.0 255.255.255.0 management
Telnet timeout 5
SSH 62.255.171.0 255.255.255.224 outside
SSH 192.168.254.0 255.255.255.0 outside
SSH 192.168.10.0 255.255.255.0 inside
SSH 192.168.25.0 255.255.255.0 inside
SSH timeout 5
SSH version 2
Console timeout 0
VPN-sessiondb max-other-vpn-limit 250
VPN-sessiondb 2 max-anyconnect-premium-or-essentials-limit
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
prefer NTP server 192.168.10.6 source inside
WebVPN
internal group to distance-VPN strategy
attributes of group to VPN remote policy
value of server WINS 192.168.10.21 192.168.10.22
value of server DNS 192.168.10.21 192.168.10.22
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value Remote-VPN_splitTunnelAcl
value by default-field
username empty empty encrypted password privilege 0
user name empty attributes
VPN-VPN-remote group policy
username empty encrypted password privilege 0
user name empty attributes
VPN-VPN-remote group policy
type tunnel-group to distance-VPN remote access
global-tunnel-group attributes to remote VPN
address pool VPN-pool
strategy of group - by default - remote-VPN
remote VPN-ipsec-attributes tunnel-group
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the netbios
inspect the tftp
Review the ip options
inspect the sip
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
contact-email-addrProfile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:b8263c5aa7a6a4d9cb08368c042ea236Hi Simon,.
Please try this and let me know.
NAT (inside, all) source 20_range_subnet destination 20_range_subnet static static obj - 192.168.254.0 obj - 192.168.254.0
Let me know, if this can help.
Thank you
Rizwan James
-
To conform to the configuration script config-firewall-access hardening
We try to work on the hardening of ESXi 5 setting ID config-firewall-access. With the Client vSphere, VMware hardening guide says "for each permit to serve (for example ssh, vSphere Web Access, http client), select 'Firewall', select 'Allow only connections from the networks' and offer a range of allowed IP addresses.". Naturally, we want to this script, but I am new to PowerCLI scripting so not okay. Anyone could lead to a code to conform to this setting?
There is a link to the guide at http://communities.VMware.com/docs/doc-19056 .
Welcome to the VMware VMTN communities!
The following script PowerCLI will select "Allow only connections from networks" and set the range of IP addresses allowed to 192.168.0.0/24 and will be also defined the permit IP address 192.168.1.2 to all permit services on all hosts in your environment.
$spec = New-Object VMware.Vim.HostFirewallRulesetRulesetSpec $spec.allowedHosts = New-Object VMware.Vim.HostFirewallRulesetIpList $spec.allowedHosts.ipAddress = New-Object System.String[] (1) $spec.allowedHosts.ipAddress[0] = "192.168.1.2" $spec.allowedHosts.ipNetwork = New-Object VMware.Vim.HostFirewallRulesetIpNetwork[] (1) $spec.allowedHosts.ipNetwork[0] = New-Object VMware.Vim.HostFirewallRulesetIpNetwork $spec.allowedHosts.ipNetwork[0].network = "192.168.0.0" $spec.allowedHosts.ipNetwork[0].prefixLength = 24 $spec.allowedHosts.allIp = $false $VMHost = Get-VMHost | ForEach-Object { if ($_) { $FirewallSystem = Get-View -Id $VMHost.ExtensionData.ConfigManager.Firewallsystem $FirewallSystem.FirewallInfo.RuleSet | Where-Object {$_.Enabled} | ForEach-Object { if ($_) { $FirewallSystem.UpdateRuleset($_.Key, $spec) } } } }
To generate the lines in the script that begin with $spec I used VMware project Onyx. It is a very simple tool that allows you to do something in the vSphere client and generate the code corresponding PowerCLI. Like a macro recorder. You can use Onyx to generate the HostFirewallRulesetRulesetSpec specific to your environment.
Best regards, Robert
-
Cannot access admin (ReadyNAS 102) Panel
After turn on my NAS gets 192.168.2.25 IP address, I can ping from my PC. Power led blinks constantly after power to the top, I can't disable it only by unpluging power cord. I can't access Admin Panel by browser (connection refused) in Chrome and IE. I tried the procedure of resetting factory and OS reinstall that brings no improvement. RAIDar software is the realization that one SIN, but the firmware version is empty, so I guess there's the problem. Is there a way I can download the firmware - for example from USB when I have no access to admin panel? I am very disappointed because this is the State of the new product and my business really needs it goes fast...
Hello CPR,
Welcome to the community!
The operating system and data are saved on the disc that is inserted in the ReadyNAS chassis. Without the records, there is no, you will not be able to access the admin page. SSH is also disabled by default, so if you want to access via SSH, you must Access the first admin page and then allow it to from there. Telnet access is designed for engineering and support of L3.
Kind regards
-
Translation in MAX problem when you configure the SSH server on a cRIO-9068
Hello
In my view, that there is a problem with the German translation of the remote switches max on the new cRIO-9068. When you look at the English Version, you see "Enable Secure Shell Server". In the German Version, you see "Secure Shell Server deaktivieren" which meens to disable the SSH server. The box did the same features, so after you disable SSH in can access. This it seems that it is probably just a translation problem.
I have attached two screenshots.
Andreas
Thank you Andreas.
This has already been supported in Nov 2013 and should be fixed soon.
Marco Brauner NIG.
-
Restore Vista to the factory specifications
I inherited a piece o ' * my fiance Dell 22 L w / Vista Home Basic installed. She was horribly swollen, and I want to make Virgin again. I tried to restore it to factory specifications, but access has been denied again his account is an administrator account. I'm went to users and disabled password protection but had to reboot and now I can't find the utility to create the image of factory restore. I had Vista on my Toshiba, tried to install XP but I was told it couldn't be done with a SATA drive, went to Linux Mint, then Win 7. Tried to win * but I'm back to Win 7. Vista is a dog and it's been too long that I tried to work with her. I would really appreciate the help w / this.
Hello
Here is the information from Dell using the Dell recovery partition.
You can contact dell and ask them to send you a set of recovery disks.
They should do this for a small fee.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
Maybe you are looking for
-
Satellite L670-1EE does not start after upgrading RAM 4 GB to 8 GB
I'm trying to upgrade the RAM from 4 GB to 8 GB. If I replace two 2 GB of 2 modules of 4 GB modules, the BIOS (which is the most recent) realize the 8 GB, but does not start at startup. There is just the white cursor blinking not. When I put in the 1
-
Can I control the activity of the two loops independently while in the same vi?
I would like to run two generators of random numbers (RNG) in the same vi. The first GNA go all the time that the vi is running. But I would like to be able to control the second RNG (turn on and off at will). I consider start and stop buttons wired
-
How can I that emails from a particular server?
Details: I get emails from people who sell Viagra etc, and other offering *. I block these emails, but spammers change their e-mail address, so I would like to know how I can identify what 'server' sends these messages and block this server. The comm
-
Error install civ 4, "feature transfer error".
I am running windows 7 and trying to install civ4. When you download the 2nd disc it says "feature transfer error" (cyclic redundancy check data error check) if any body know wat this means or can help out me that would be great.
-
Displays the message if ListView is empty
I create an application that will empty ListView when it is installed. I want to display a message 'No still images' on this subject, but I'm not sure of the best way. One way would be to add a point and have a custom ListItemComponent so that it dis