SSL RIDC provider configuration

Similar Questions

• [WLS 10.3] Why I didn't "Use SSL JSSE" (Server-> configuration-> SSL)

  WebLogic Server version: 10.3
  
  Why I didn't "Use SSL JSSE" (Server-> configuration-> SSL)

  Because you're using WL 10.3?

  The feature is available in 10.3.3 (version 11g)

• For the authentication provider configuration error

  I tried for the life of me to get a new device from vro to register with my field of vcenter/sso. I have an external CSP and trying to do the vSphere mode. I tried both pointing to my PSC which seems to me the good option and vcenter himself. When I click on connect, I immediately get an error of returned HTTP 400 State. You can see the full error in the attached screenshot. Someone at - it ideas?

  

  I was able to push wrong that this problem still today. API calls to register with the PSC, where never making it out of the appliance of vRO. It was the tool of eggs during the deployment does not meet the /etc/resolve.conf virtual machine file. Once I edited the file and add an entry for server names manually, I was able to configure the authentication provider. It is interesting because all other configurations of the virtual machine network properly taken into account by the deployment tool. Once I get some free time I'll deploy another vm and take a look and see if the same problem arises.

• SSL - encryption selection/configuration

  Hello
  I have two OSB communicate via the SSL protocol.
  How to configure Weblogic to use a particular encryption algorithm when communicating.
  I want the communication to use TLS_RSA_WITH_NULL_SHA or no matter what null encryption algorithm, so that
  the content can be scanned it transited by a firewall.

  There is a technique described here:

  http://seancblake.com/?p=3

• Failed to configure Acrobat to connect to LiveCycle RM due to the SSL protocol error

  I get the following error when I try and configure Acrobat to connect to the LiveCycle RM server.

  Unable to connect to the service at the: < host > https://: 443

  SSL protocol error.  Certificate is either not valid, or the common name or authority are not recognized. If the problem persists, contact an administrator.

  When I configure SSL on JBOSS, we used a certificate self-signed using the keytool JDK.  I can confirm that SSL is correctly configured on JBOSS.   Type < host > https://: 443 in a browser that brings me to the JBOSS page.  Also https:// < host >: 443/edc opens the user interface rights mgmt.

  This means, I won't be able to test without a real cert of a like Entrust certification authority?

  Also, what is the name of user and password in the settings menu?  Is a login in livecycle?  or for the cert?

  You must ensure that the host (443https://) is the same as the one you specified when you created the keystore. Do not use localhost.

  Jasmine

• the Web UI using ssl generator

  I use LV2012 with Interface Builder.  I am trying to use SSL for security.  My application works very well with http.  I can access my web services directly via https.  When I try to import the web services in the Web user interface Builder using port 8081 (for SSL), I get the following error...

  Generator of the user Web LabVIEW interface cannot connect to the server. Check the server address and that the server is running. Also make sure that the server hosts file clientaccesspolicy.xml to root with valid permissions.

  LV2012 is a "clientaccesspolicy.xml" held to do SSL?  It is not necessary for http on port 8080.

  Hi Ken,

  LabVIEW should provide a file default on HTTP and HTTPS clientaccesspolicy.xml.

  There could be many different questions here:

  -If you go to https://yourmachine:8081 / clientaccesspolicy.xml in a browser, do you think the policy file? (It takes an automatically, as I mentioned).

  If it works, but you get a certificate error / warning that you have ignored - this is because the default self-signed certificate for the web server LV is not approved. Generator of the user Web interface cannot connect via HTTPS in this case, unless you trust the certificate permanently installing it locally. In addition, you will need to connect to the exact hostname specified by the certificate. If you do not get a certificate error / WARNING when accessing the server directly, you should be able to use in the Web user interface designer (using the exact same server name syntax).

  -If you are using the import Web Service functionality in the user Web interface Builder and tries to connect to "yourmachine:8081", try "https://yourmachine:8081".

  -If you cannot use Import Web Service using the exact hostname that the SSL certificate is configured for in (the editor, depending on the configuration of the network, is not able to connect to via of "yourmachine", only through your address IP; but "yourmachine" would work when you run an application built): you can design at the start of your application in the editor by connecting over HTTP. When you're ready for the generation & deployment, you can use the entry "Server uri in" web service generated screws to allow the SSL right before building.

• AnyConnect certificate of 3rd third-party trust provider

  Hello world

  I configured the Anyconnect networked.

  Now I need to get the cert of 3rd third party provider in connection users that they should not get warning that this network is not approved.

  I need to know what information I need to get the ASA so I can get the SSL certificate provider?

  Also need to know if I can activate user authentication based on this cert also?

  Currently, auth is done through RADIUS?

  Concerning

  Mahesh

  Each transmitter requirements vary, but generally you will need to submit a CSR (Certificate Signing Request) to the issuing certification authority (CA). They will sign and issue a certificate for your ASA and send to you (or send you a link to download). You will then have a certificate (file) to install on your ASA.

  See the link here for more details on the installation and use of the certificate.

• easconsole problems with SSL

  Hello

  We install and configure an EPM v11.1.2.2 system. We have configured the OSH as the SSL transcoder and it works perfectly for the Shared Services administration console and SmartView:

  https://mycompany.com/interop/index.jsp -works perfectly

  https://mycompany.com/workspace/SmartViewProviders -works perfectly.

  Problem comes at the launch of easconsole via the web: https://mycompany.com/easconsole/console.html. Receive a «cannot start the application»

  We can see he's trying to start the application from https://mycompany.com:80 , which is obviously not correct, because the standard SSL port is configured in OSH (443). A little, jnlp is not well "created" and selecting port 80 instead of just.

  We don't have any problems at the launch of the easconsole with non - ssl to http://mycompany.com:19000/easconsole/console.html

  What is important, we also applied the latest updates of patches:

  11.1.2.2.303 for Oracle Enterprise Performance Management 11.1.2.2 (Patch)

  HYPERION ESSBASE ADMINISTRATION SERVICES SERVER 11.1.2.2.106 (Patch)

  HYPERION ANALYTIC PROVIDER SERVICES 11.1.2.2.106 (Patch)

  HYPERION ESSBASE SERVER 11.1.2.2.106 (Patch)

  HYPERION ESSBASE RTC 11.1.2.2.106 (Patch)

  Any ideas?

  Thanks in advance

  Edit: The platform is W2K8 (x 64)

  Take a look at the doc Oracle Support - "Essbase Administration Services (EAS) does not open when using SSL (Secure Sockets Layer) to the load balancer or Web/SST (Doc ID 1346806.1) server layer"

  Workaround says 11.1.2.1 but it is still valid on later versions

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• How to change e-mail provider

  I have a psc 2110v all-in-one and uses Windows XP sp 3.  When I scan and want to send an e-mail, it is sent in Outlook express, that I don't use and then is sent to a mail provider which I no longer use.  ((1) how do I change Outlook express to the provider I use, or 2) how do we change from the email provider I no longer use than currently in use?

  Hello gdo

  Scan to e-mail an e-mail such as outlook client needs.

  At your provider configuration previous e-mail via Outlook? Have you tried to add in your new email account in outlook?

• Algorithms of different SSL encryption between 5525 x and x 5555?

  Good afternoon

  I have an ASA 5525 x and an ASA 5555 x.  Both of them run 9.4 (2.6).

  5525 x supports all the new encryptions that are discussed in the notes.

  lab-asa5525x# sh ssl ciphersCurrent cipher configuration:default (fips): ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-RSA-AES256-GCM-SHA384 DHE-RSA-AES256-GCM-SHA384 AES256-GCM-SHA384 ECDHE-ECDSA-AES256-SHA384 ECDHE-RSA-AES256-SHA384 DHE-RSA-AES256-SHA256 AES256-SHA256 ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-RSA-AES128-GCM-SHA256 DHE-RSA-AES128-GCM-SHA256 AES128-GCM-SHA256 ECDHE-ECDSA-AES128-SHA256 ECDHE-RSA-AES128-SHA256 DHE-RSA-AES128-SHA256 AES128-SHA256 DHE-RSA-AES256-SHA AES256-SHA DHE-RSA-AES128-SHA AES128-SHAtlsv1 (fips): DHE-RSA-AES256-SHA AES256-SHA DHE-RSA-AES128-SHA AES128-SHAtlsv1.1 (fips): DHE-RSA-AES256-SHA AES256-SHA DHE-RSA-AES128-SHA AES128-SHAtlsv1.2 (custom): ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES256-SHA384 ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES128-SHA256dtlsv1 (fips): DHE-RSA-AES256-SHA AES256-SHA DHE-RSA-AES128-SHA AES128-SHAlab-asa5525x# lab-asa5525x# sh runn all sslssl server-version tlsv1.2ssl client-version tlsv1.2ssl cipher default fipsssl cipher tlsv1 fipsssl cipher tlsv1.1 fipsssl cipher tlsv1.2 custom "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-SHA256"ssl cipher dtlsv1 fipsssl dh-group group24ssl ecdh-group group20ssl trust-point 2016-03.lab-asa Outsidessl certificate-authentication fca-timeout 2lab-asa5525x# 

  5555 x does not support encryption of elliptical curve which are discussed in the notes.

  ASA5555x-01# sh ssl ciphersCurrent cipher configuration:default (medium): DHE-RSA-AES256-SHA256 AES256-SHA256 DHE-RSA-AES128-SHA256 AES128-SHA256 DHE-RSA-AES256-SHA AES256-SHA DHE-RSA-AES128-SHA AES128-SHA DES-CBC3-SHAtlsv1 (medium): DHE-RSA-AES256-SHA AES256-SHA DHE-RSA-AES128-SHA AES128-SHA DES-CBC3-SHAtlsv1.1 (medium): DHE-RSA-AES256-SHA AES256-SHA DHE-RSA-AES128-SHA AES128-SHA DES-CBC3-SHAtlsv1.2 (medium): DHE-RSA-AES256-SHA256 AES256-SHA256 DHE-RSA-AES128-SHA256 AES128-SHA256 DHE-RSA-AES256-SHA AES256-SHA DHE-RSA-AES128-SHA AES128-SHA DES-CBC3-SHAdtlsv1 (medium): DHE-RSA-AES256-SHA AES256-SHA DHE-RSA-AES128-SHA AES128-SHA DES-CBC3-SHAASA5555x-01# ASA5555x-01# sh runn all sslssl server-version tlsv1.2ssl client-version tlsv1.2ssl cipher default mediumssl cipher tlsv1 mediumssl cipher tlsv1.1 mediumssl cipher tlsv1.2 mediumssl cipher dtlsv1 mediumssl dh-group group2ssl ecdh-group group19ssl trust-point 2016-03.ssl-vpn Outside_85ssl certificate-authentication fca-timeout 2ASA5555x-01# 

  I opened a case of TAC and 5585 9.4 (2.6) also running of the TAC engineer does not support encryption EC? Can someone help me understand what Miss me? X - platforms ASA should support the same features, right? Thank you Tim

  Hello

  Disable the Anyconnect essentials from the setting global webvpn, toured here.

  CLI:

  WebVPN

  No anyconnect essentials

  Thank you

• SSL VPN and Windows 7 32 bit

  I wonder if it is possible to have 2 SSL VPN client running simultaneously at the same time. When I'm working out of the site, I have to do the following:

  1. I call Array SSL VPN network to connect to the corporate network. I need it to be able to read emails.

  2. I invoke some other developed internal SSL VPN client to connect to the customer's network. This is necessary to get access to access the Citrix customer environment.

  When I run the 2nd SSL VPN, my vision behaves erratically as the gel or the loss of connection to the exchange server.

  SSL VPN network table is a SSL VPN split, which means that it routes web traffic of the company and nothing else.

  Developed internal SSL VPN is configured to route specific IP range.

  I wonder if there is any limitation in Windows 7 32 - bit OS that prevent me to simultaneously run 2 SSL VPN clients.

  Appreciate your comments and your support.

  Hi SamPersis,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Thank you.

• Step how to configure ASA 5500 Series Security Services Module-10 (model: ASA-SSM-10)

  Dear support,

  I need to configure Security Services Module-10 (model: ASA-SSM-10) on my ASA 5510 firewall. Could you provide configuration step and how to connect to the module?

  Here is the information on the module

  ciscoasa (config) # sh Details of module 1
  The details of the Service module, please wait...
  ASA 5500 Series Security Services Module-10
  Model: ASA-SSM-10
  Hardware version: 1.0
  Serial number: JAF1115066U
  Firmware version: 1.0 (11) 2
  Software version: 1.0000 E1
  MAC address range: 001a.e268.5aa9 to 001a.e268.5aa9
  App name: IPS
  App status. : to the top
  App status. / / Desc:
  App version: 1.0000 E1
  Data of aircraft status: Up
  Status: to the top
  Mgmt IP addr: 133.1.9.144
  Web to MGMT ports: 443
  Mgmt TLS enabled: true

  your help is very appreciate.

  Thank you

  Best regards

  Hi Sothengse,

  Please find the samlpe on AIP SSM module configurations. You can go through this to begin with.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  https://www.YouTube.com/watch?v=FgYU5ZXwk4g

  Concerning

  Knockaert

• not having to ssl vpn login prompt

  Hi all

  This is the configuration for SSL vpn on our ASA 5510.   . If we made the reference to the site configuration, we are unable to get the login prompt. could you please check and suggest you do the work of SSL vpn

  Configuration

  ===========

  WebVPN
  allow outside
  back to url-list Test webvpn
  import webvpn url-list SSL_Bookmarks disk0: / tmpAsdmImportFile1646955469
  delete /noconfirm disk0: / tmpAsdmImportFile1646955469
  internal SSL_users group strategy
  attributes of Group Policy SSL_users
  VPN-tunnel-Protocol webvpn
  WebVPN
  the value of the URL - list SSL_Bookmarks
  type tunnel-group SSL_VPN remote access
  attributes global-tunnel-group SSL_VPN
  Group Policy - by default-SSL_users
  Group-RADIUS authentication server
  attributes of Group Policy SSL_users
  VPN-tunnel-Protocol svc webvpn
  tunnel-group SSL_VPN webvpn-attributes
  enable AnyConnect group-alias
  WebVPN
  tunnel-group-list activate

  ============================

  Version

  ======

  ASA-5510-1 # sh ver

  Cisco Adaptive Security Appliance Version 8.2 software (1)
  Version 6.2 Device Manager (1)

  Updated Wednesday, 5 May 09 22:45 by manufacturers
  System image file is "disk0: / asa821 - k8.bin.
  The configuration file to the startup was "startup-config '.

  ASA-5510-1 up to 57 days 9 hours

  Material: ASA5510, 256 MB of RAM, processor Pentium 4 Celeron 1600 MHz
  Internal ATA Compact Flash, 256 MB
  BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CN1000-MC-BOOT - 2.00
  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04
  0: Ext: Ethernet0/0: the address is 0027.0d38.034e, irq 9
  1: Ext: Ethernet0/1: the address is 0027.0d38.034f, irq 9
  2: Ext: Ethernet0/2: the address is 0027.0d38.0350, irq 9
  3: Ext: Ethernet0/3: the address is 0027.0d38.0351, irq 9
  4: Ext: Management0/0: the address is 0027.0d38.0352, irq 11
  5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
  6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 100
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: disabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect for Linksys phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5510 Security Plus license.

  Serial number: JMX1350L04D
  Activation key running: 0xef04c544 0xf4999c16 0xf4c19950 0x85684c50 0x442c3292
  Registry configuration is 0x1
  Modified configuration of enable_15 to 06:55:11.349 UAE Thursday, November 18, 2010
  ASA-5510-1 #.

  ===================

  Thanks in adavnce

  You can get the activation key for 3des from the license page (it's free):

  https://Tools.Cisco.com/swift/licensing/PrivateRegistrationServlet?DemoKeys=Y

  (Click on Cisco ASA 3DES/AES license)

  It can work with just, however, your browser might not support SOME. The browser asks political there and see if ASA has set up, but I know that a lot of the new browser will not load more, but feel free to try.

• Cisco ASA 5505 and comodo SSL certificate

  Hey all,.

  I'm having a problem with setting up the piece of Certificate SSL of Cisco AnyConnect VPN. I bought the certificate and installed it via the ASDM under Configuration > VPN remote access > Certificate Management > identity certificates. I also placed the piece of 2 CA under the CA certificates. I have http redirect to https and under my browser, it is green.

  Once the AnyConnect client installs and automatically connect I get no error or anything. The minute I disconnect and try to reconnect again, I get the "VPN Server untrusted certificates! ' which is not true because the connection information to be https://vpn.mydomain.com and the SSL certificate is configured as vpn.mydomain.com.

  On that note, it lists the IP address instead of the vpn.mydomain.com as the unreliable piece of this. Now of course I don't have the IP as part of the SSL-cert, just the web address. On the side of the web, I have a record A Setup to go from vpn.mydomain.com to the IP address of the Cisco ASA.

  What I'm missing here? I can post config if anyone needs.

  (My Version of the Software ASA is 9.0 (2) and ASDM Version 7.1 (2))

  Yes that's correct. technically, it will take you to EKU as keys to authenticate server who was a little forced in version 3.1. But eventually, he was taken away. If you get no error using the browser and ot only comes with the anyconnect client. Most likely, you do not have to configured values. I can confirm that if you can share the fqdn with me also, you can try the upgrade and check it out.

  Thank you

  Bad Boy

• SSPROCROWLIMIT in essbase.cfg vs service.olap.dataQuery.grid.maxRows essbase.properties (service provider)

  Hello

  I have a question about SSPROCROWLIMIT in essbase.cfg vs service.olap.dataQuery.grid.maxRows essbase.properties (services provider configuration file). When assign us some non SSPROCROWLIMIT in essbase.cfg must take the same number of service.olap.dataQuery.grid.maxRows also.

  These settings should not be matching?

  If you do not use repression (and none of your users never use repression) and only use Smart View so I guess that these two parameters might as well be the same. But I doubt there has ever been an Essbase installation where none of the users never used repression, it is not really relevant.

  What I see in real life, it's that people stick with the settings by default until the users are running in one or the other and then change them...