SSL vpn through the same internet connection to another site

Similar Questions

• Blocked office internet access but not laptop on the same internet connection.

  I ran Malwarebytes software... which is on top of my McAfee... and he finds 6 infections, remove them, rebooted, the internet connects for a few minutes then gets lost.

  Confirmed network connection. Icon indicates a service, but does not connect.

  Hello

  What is the status of the NIC in Device Manager?

  Read the following article that may help you resolve this problem.
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095

• I can connect to the internet have the perfect internet connection, but each webpage says its does not

  I know that it is not my internet connection my bf and I are one the same internet connection and his works fine what else could be

  Hi Stoner,

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Which web browser is installed on the computer?

  Method 1
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.
  Method 2
  I suggest you try the steps from the following link:

  What to do if Internet Explorer stops responding (applies to Windows 7)
  http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-Internet-Explorer-stops-responding

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

  I hope this helps. Let us know the result.

• Cisco ASA5520 facing ISP with private IP address. How to get the IPSec VPN through the internet?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello guys,.

  I have Cisco ASA5520 facing the ISP with private IP address. We don't have a router and how to get the IPSec VPN through the internet?

  The question statement not the interface pointing to ISP isn't IP address private and inside as well.

  Firewall configuration:

  Firewall outside interface Gi0 10.0.1.2 > ISP 10.0.1.1 with security-level 0

  Firewall inside the interface Ethernet0 192.168.1.1 > LAN switch 192.168.1.2 with security-level 100

  I have public IP block 199.9.9.1/28

  How can I use the public IP address to create the IPSec VPN tunnel between two sites across the internet?

  can I assign a public IP address on the Gig1 inside the interface with the security level of 100 and how to apply inside to carry on this interface?

  If I configure > firewall inside of the item in gi1 interface ip address 199.9.9.1/28 with security-level 100. How to make a safe lane VPN through this interface on the internet?

  I'm used to the public IP address allocation to the interface outside of the firewall and private inside the interface IP address.

  Please help with configuration examples and advise.

  Thank you

  Eric

  Unfortunately, you can only complete the VPN connection on the interface the VPN connection source, in your case the external interface.

  3 options:

  (1) connect a router in front of the ASA and assign your public ip address to the ASA outside interface.

  OR /.

  (2) If your ISP can perform static translation of 1 to 1, then you can always finish the VPN on the external interface and ask your provider what is the static ip address assigned to your ASA out of the IP (10.0.1.2) - this will launch the VPN of bidirectionally

  OR /.

  (3) If your ISP performs PAT (dynamic NAT), then you can only start the tunnel VPN on the side of the ASA and the other end of the tunnel must be configured to allow VPN LAN-to-LAN dynamics.

• Office in distance and VPN at the same time?

  Is it possible to have an office in distance and connected VPN at the same time without installing any additional software?

  It is certainly.

• ASA5500 - Essentials SSL and SSL Premium on the same platform?

  Hi all

  A make a BOM THAT and I just ask my self can we order on the platform of a single (for rxample 5510-SEC-BUN-K9)

  SSL Essentials license (the license is on the default platform we buy 250 ussers) and I need 50 user licenses them to be Premium.

  Can I purchase a license of thos two on the same platform and this will work?

  You cannot activate the essential SSL and SSL Premium on the same platform. You can't have that 1 or the other, not both.

  Essential SSL will give you that the maximum number of SSL VPN support on the platform, however, only for the complete tunnel mode AnyConnect.

  Premium SSL will give you the number of users purchased, however, it supports all flavors of VPN AnyConnect/SSL, IE: AnyConnect full tunnel mode, WebVPN (Clientless SSL VPN) and all the advanced functionality of SSL VPN.

  I hope this helps.

• C55-b854 satellite shows the limited internet connection

  It shows the connection some time limited and the adapter is ok.and the internet speed is also slow.

  Hello

  You did not provide details if this happens using a LAN or WLan connection.
  I would recommend checking the two internet connections.
  In the case of this limited connection problem would only appear using the WiFi connection, then you should check the configuration.

  First of all, I would like to recommend that test you different standards WLan 802.11 (B/G/N) and different (WPA/WPA2 AES, TKIP) encryption standards

  By the way; the WLan card also shares the BT. in case you are using WLan, please keep off BT.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• Hello, how can I find the best internet connections for my windows seven? I use my cell phone internet phone with a usb cable.is there any software from microsoft to help me?

  Hello, how can I find the best internet connections for my windows seven? I use my cell phone internet phone with a usb cable.is there any software from microsoft to help me?

  Hello

  The fastest internet connection depends on your internet speed provided by her Internet (ISP) Service provider. Therefore, contact them to receive a best speed of the internet.

  For more information:

  How to increase the speed of navigation: 7 ways to work faster on slow connections

  http://www.Microsoft.com/atwork/remotely/connections.aspx#fBid=TN-_TCHYDMB

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=1vrPRuhAhAg

  Internet Explorer is slow? 5 things to try

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  It will be useful.

• If you install and activate your Lightroom on a single computer, and dies from this computer, is it possible that you can use the same serial number on another computer?

  If you install and activate your Lightroom on a single computer, and dies from this computer, is it possible that you can use the same serial number on another computer?

  With most of their applications, you can disable it on a single computer, and then turn on another.  I'm not 100% sure of Lightroom, however.

• Client VPN access router to the Internet through the same router! How?

  Hi all

  I already setup VPN users connect to our router 1841 and corporate network. Use Cisco VPN Client and connection ends on the interface Dialer1 in 1841. This interface is also our ADSL Internet connection.

  I need the VPN users out to the Internet via this VPN connection (it is through this Dialer1), rather than use the split tunneling and Internet browsing from their Local Internet service providers.

  Of course, this Dialer1 is also 'nat outside' and FastEthernet is LAN and "nat inside '.

  So I'll need NAT these VPN-pool addresses to address IP Dialer1. But what would be 'nat inside' in this case...

  Can anyone help?

  a loopback interface must be configured to "nat inside '.

  for example

  Loopback int 1

  IP 1.1.1.1 255.255.255.0

  No tap

  IP nat inside

  access-list 199 refuse ip<1841 private="" net=""><1841 private="" net="" mask="">

  access-list 199 ip allow a

  allowed policy-road route map 10

  corresponds to the IP 199

  set ip next-hop 1.1.1.2

  interface Dialer0

  political map of IP policy-road route

• You try to run a Site to site VPN and remote VPN from the same IP remotely

  We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

  Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

  My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

  Hi John,.

  Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

  CSCuc75090  Details of bug

  The crypto IPSec Security Association are created by dynamic crypto map to static peers

  Symptom:

  When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

  Conditions:

  It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

  The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

  Workaround solution:

  N/A

  Some possible workarounds are:

  Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

  Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

  Below some information:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

  Hope this helps,

  Luis.

• Server 2008 r2 domain through IP locations & Internet Connectivity when domain server (internet down instead)

  Sorry for the long title: p

  I recently picked up a non-profit operations in the city with offices in three locations in the city.

  We have a network domain server and exchange server at the main office where I work, and the computers in the other two offices are on the field.

  (I guess that VPN configurations in our routers keep everything connected, but maybe I'm wrong on this issue..)

  My problem is that when the internet at the office of the admin (where the servers are) breaks down, desktop to other locations have DNS problems and cannot connect to internet... and personal devices connected to WiFi that I provide to these places are struggling as well, being able to access only certain sites and sometimes no access at all.

  I think many computers to assign IP addresses, although I have added computers I have built and/or formatted and installed myself that work very well on the field.

  Why computers to the other localities are struggling to DNS and impossible to connect to the internet when the domain server is offline? What can I do to change this? I want our employees to always have internet access if the servers log.

  (Being a non-profit in this city it is the COMPUTER with most of the companies not having budget do not)

  The problem was the result of a secondary DNS server is not located in the router from the same place. My computer guy said Comcast as the secondary where the main DNS (my domain controller) server is not available... problem solved :)

• Third-party SSL VPN ended the DMZ ASA

  Hi all

  Any help is appreciated. Is it possible:

  I have a DMZ set in ASA 5520, and worked well so far. The DMZ subnet is 192.168.10.0/24 and IP on the DMZ interface is 192.168.10.1. Now, I'm trying to add a third-party SSL VPN device (not Cisco). The device has an IP 192.168.10.101. The SSL VPN appliance will give IP addreess SSLVPN customers in the range of 192.168.20.x. After the connection is established, the client is indeed getting the IP addr 192.168.20.x. However, clients are unable to connect to the internal LAN. If I change the IP address range clients on the same subnet that the area demilitarized, everything works. My question is that, as customers SSLVPN are complete on the demilitarized zone and get a different subnet IP address, how can I / road map these addresses before they6 can access internal network inside the interface, or it can be done at all?

  All advice is appreciated.

  You just need to add the routes appropriate on the SAA for this pool. And also on any Layer 3 routing devices inside the ASA.

  Concerning

  Farrukh

• VPN to use remote internet connection

  Hello

  I'm trying to access a Web site in the Venezuela that is blocking connections from outside Venezuela (official results of the presidential elections Sunday, which are publicly). I have access to remote control a computer running windows 7 to the Venezuela, but I don't want to use remote desktop as connections every time I want to visit this Web page.
  I remember that my school provides VPN access so that we can access documents and others during off-campus research and thought I could use VPN Windows anyway.
  I managed to create the VPN connection using VPN Windows clients/server, but it only allows me to access the internet. If I uncheck the option 'use remote gateway', while my local internet connection will always be recognized as outside the Venezuela. How can I activate the remote computer access to the internet for my local system connected VPN?

  Hello

  The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in the TechNet forum below

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro