SSO and calculations of the Application

Similar Questions

• Start threading with another processID, and then close the application

  Hello

  It is a delicate issue, so maybe something for all wizards among us

  OS 4.6.0 9000 "BOLD", put to the test through Wifi and 3 G networks

  As far as my knowledge about operating systems goes, it is not possible to start a process of your own application, close the application and then update the application. This is because the process began has the processID of the app as a parentID. So long as the process is running the application is running and access its files of cod.

  I'm trying to get an update mechanism in my application. At the moment I am citing a new private and out of my application (via the call onClose() on all the screens on the stack or the System.exit (0)) after the start of the thread of displayPage() browsersessions. I know, that probably would never work, but it is the simplest approach and worth a try. With the two variants to close the parent application ota download starts but hangs at about 10%. I guess that's because then a cod of the application file is tried to be crushed. The following threads and knowledge previously mentioned on OSs, it would be the point where the application must be fully completed.

  Now, even after all ways to close an app I know... even if I try to reinstall on OTA via the external browser, download hangs at 10% (App closed before!). Seems I have the same problem as this guy, but calling onClose on all screens does not solve him.

  Screw on the problems to kill a bb - app

  After the crash, the machine stops and restarts. Unless I start the app again once I'm able to reinstall via OTA Download in the external browser. This brings me to some open handles that could be left by my application close. Is it possible to really put an end to the application without the remains? In the following article, I read that there is some app cleaner memory running in the background. A cleaning of my application data can be requested manually when closing?

  Thread mentioning the cleaner memory application

  Article on cleaning memory

  Another approach, that I thought would write a separat Updater app. It would be installed via OTA on the original app (does not affect the files of applications). Then the application closes, the update must be run manually by the user. It will offer an opening to private download ota of the new app problem is still that the download would crash unless the former PPP has been terminated correctly before.

  Any ideas on this subject?

  Rob has soon

  Thanks Jerome,.

  He will give a try.

  Regarding the problem of update: call the external browser works fine, the only thing to be wary of is not to close the app but just ask the application to get to bottom:

  synchronized(UiApplication.getEventLock()) {
      synchronized (PersistentStore.getSynchObject()) {
          UiApplication.getUiApplication().requestBackground();
      }
  }
  

  from the download ota after that works almost perfectly (browser cache needs to be cleared before, cod size is 650 kb).

  Regarding the intelligent programming, I found this:

  Article on installing and updating applications programmatically

• Hi I was doing a tutorial on spllcing images and am confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi I did a tutorial on the splicing of images and I'm confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi, Yona,.

  The application is available for Mac machine and not a windows machine.

  Concerning

  Rohit

• Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But i

  Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But it is keep taking so long time and struck at the end of the installation of 42%.

  If the installation process is stalled at 42 percent with no possibility of error, there is a problem with the zipped file to Extraction of downloaded in the Temp folder.

  As a fundamental step. Leave the creative Cloud desktop application.

  Delete the contents of the Temp folder:

  Optional: it will be ideal to install software like Winrar, WinZip or 7-zip,., etc.

  Please press Windows + R and you will get a command window run, get hit and type %temp%.

  Delete all the content inside the temp folder.

  
  

  
  Then try again to install application InDesign CC again.

  Just in case, if you are still having the same issue.

  Creative application cloud thus released, do not close it.

  Open the Temp folder, then search for the CC InDesign installation file and copy it to the desktop computer.

  Then leave Creative Cloud application and try to install.

• works of the charging dose and signs in the application

  works of the charging dose and signs in the application

  the doc is already a pdf

  who needs to be filled several times

  It works on adobe in windows 7

  Salvation;

  The "Fill & sign" tab on the site Web of Acrobat.com https://cloud.acrobat.comare you referring?  Here's a tutorial to fill & sign Tutorial: Introduction to Adobe fill & sign

  Thank you

  Josh

• Urgent - Custom authentication and authorization for the application of the ADF

  Hi friends,
  
  Custom implementation for authentication and authorization for the application of the ADF
  
  My project to use the OID , authentication and authorization, we will need to support both OAM and DB tables ( according to the preferences of the client during the installation ).
  
  I am new to this and do not have a clue about the same.
  
  Please guide me how to set up both in JDeveloper 11 g + ADF
  
  Thanks in advance.

  The answers you got up to present every point in the right direction. ADF security see the authentication of WLS, even for business authorization with respect to user roles defined on the WLS server. During the deployment, ADF security defined application roles are mapped to the user enterprise groups

  Application developed using Jdeveloper ADF +.

  This would use WLS for authentication

  Users of authentication - LDAP (OID) - are stored in LDAP

  Use the OID authentication provider in WLS

  Authorization - OAM or database (authorization details are stored in the DB or OAM tables)

  You can't allow users without authentication. If you need create authentication providers additional if they exist for OAM and RDBMS (there is a supplier of existing RDBMA, that you can use to identify users and to assign membership user groups). Then, you set the optional flag so that when authentication fails for additional providers you can always start the application.

  When running Admin users - create users from roles to create and assign permission privileges to the role (for pages and workflows)
  assign (or remove) the roles to/to leave users.

  ADF security uses JAAS to permissions that you can change using Enterprise Manager when running. Permissions are granted to the application roles and application roles are granted to business roles that which then has users become members of the. If you want to change the status of user account, then you don't do this the ADF or EM, but use a direct access to the provider of the user (for example, access OID, RDBMS access etc.) There is no unified administration API available that would allow you to do this via WLS (which uses OPSS).

  If your question is in the context of the ADF, the documentation, with that you should follow is OPSS and WLS authentication providers.

  Frank

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• I may have inadvertently downloaded Firefox 5 instead of 4 and cannot open the application because it is not supported. Can I still download Firefox 4, which I was planning to do?

  I tried to update to Firefox 3 Firefox 4. But, after completing the download and then tried to open the Firefox application, I got a message saying: "Cannot open the application"Firefox"because it is not supported on this architecture." Is it possible that I may have inadvertently downloaded Firefox 5? I do not think that my system support
  Firefox 5. I'm not a geek, so I really appreciated any help you can give me. Thank you.

  • Versions of Firefox 4 and later do not run a Mac PowerPC.
  • Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
  • http://www.Mozilla.com/Firefox/5.0/system-requirements/

  For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html

• Description and title of the application do not take effect in location

  Hello

  I can't search messages according to my topic relvant. Maybe I had walked into the wrong keywords. So, I post my question here, and wish a certain can provide assistance. Thanks in advance!

  In short, my question is: why it does not work when linking the application title and description with the resource key for multi-language.

  ------------------------------------------------

  Here is the detailed information.

  Firstly, the development environment is the last JDE plugin for Eclipse. It has been tested with phones as real Simulator, with different OS (4.5, 4.6 and 5.0), and all have the same result. So I chose the Simulator as example to explain my problem.

  The steps are:
  1.) create a BB project and create resources (.rrc and .rrh) files, for the English and the French, which contain only two resource. (See the image below).
  
  2.) bind the application title and description with the relevant resource key. (Leave the default title and description blank)
  
  3.) launch of the Simulator to check the result. At first, English language, go in "Options-> Applications-> (press the name of my test application). Please note that the description of the application is "not available".
  
  4.) change the language for the French, the name of the application has changed in the application list. But when you check the description of the app again, it is not always as expected.
  
  5.) then I add content to the default title and default description.
  
  6.) start the Simulator again. Please note that the description using the description by default, but no link.
  
  7.) change the language to French again. The description still not in force.
  

  So, do you have advice for this problem? Any suggestion is really appreciated!

  A correction to my previous post.  The localized names and descriptions are provided with the ALX file, but are not met in the JAD file.  This is why you must use an installation method that uses the ALX file.

  For deployments of the JAD file you need to detect the language accepted (via the HTTP header) on the web server and serve a JAD file that has the appropriate language populated.

• Values of the vendor and Version of the application does not

  I'm new to the BlackBerry development and work with the example of BlackBerry Web icon sample (to launch a Web site in the browser) and almost everything works correctly.

  Using the BlacBerry JDE 4.7.0.41, I created my project/application.  I tried to put the project General properties (title, description, version, vendor name).  Loading the app for BB, the title is displayed correctly, but the version shows 0.0.

  In reviewing the .jad file, it seems that the version fields and the seller are not defined on the values that I've specified on the general tab of the properties of the project (see below).

  MIDlet-Version: 0.0
  MIDlet-name: Test title
  MIDlet-Description: Test Description

  MIDlet-vendor:

  I must be missing something pretty basic, so I hope someone can point out what I have to do.

  As a solution, I thought to just modify the .jad file, but did not know if this might cause other issues.

  Thoughts/information?

  If you have already compiled the file once before defining general properties, then you need to remove the jad, so it can be recreated or editing it by hand.

• Title and icon of the Application display

  Hello

  Someone knows how to change the application title and icon in the list of all installed applications (Options-> Applications)? It is not a problem to change it on the home screen using the homescreen class, but it does not affect the list of all installed applications.

  Thanks in advance.

  As I know there is no way to change the name of the application in the list of applications with the exception of the installation of a new application on the existing.

• Error message is "launch the user interface and to reinstall the application" after executing the quick backup.

  Original title: speedy

  My pc tells me to open the settings of the user interface on my windows laptop 8. I currently have

  has ran a quick backup, and now iiiimy pc asks me to open the user interface and I have to reinstall the application

  not known were and how to find what to do.

  Hello

  Please contact Microsoft Community. I've surely you will help solve this problem.

  To better understand the issue, let me know if you get this error when executing quick backup?

  If you get this error message when running fast backup software, you can visit the article to uninstall and reinstall the software.

  http://TechSupport.SpeedyPC.com/system/templates/selfservice/speedybackup/#Portal/1013/article/8478/how-do-I-uninstall-and-reinstall-the-program

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Forms and fields in the application 'fill and sign '.

  I created a PDF with forms and fields to fill in, but when you open it in "filling and the sign" App, all fields are missing? But they are present during the opening in the application 'Adobe Acrobat'.

  Please notify.

  Thank you very much

  The app fill & sign does not even existing form fields like saying Adobe Reader on the desktop, or Acrobat for iOS.  Existing fields are not 'clickable '.  The app fill & sign creates new fields on the page where you click and enter the text if the form has already been fields to fill in those who are "flat" and new content is added on top.  This could be what you are referring.  It is really designed to work best with shapes that have no real fields on them--a major issue for many users, as there are so many PDF files out there that looks like forms, but do not have to fill in form fields.

  Thank you

  Josh

  PS - I will contact you offline to track.

• You cannot start an application (Photoshop CC etc...) I continue to bike on the adobe application manager sign - in - thank you screen - managed and return to the application manager. Demand never starts

  From CC (photoshop etc) revealed the Adobe Application Manager

  Application of sign-in

  Sign - managed

  Thank you for the screen and continiue...

  To the Adobe Application Manager

  Demand never starts

  Registration and payments are OK, it worked before.

  Someone an idea?

  Hi all

  Could you please try the following steps, depending on your operating system:

  Windows:

  • Uninstall Acrobat (whether as a standalone installation or as a component of your Creative Suite installation)
  • Run the Acrobat cleaning tool to remove remnants of the request.
  • Reinstall Acrobat X via Adobe Application Manager (creative cloud subscribers) or your Installer CS6

  Mac:

  • Uninstall Acrobat (Please check the Applications\Adobe Acrobat\Uninstall and Applications\Utilitaires installers for Acrobat uninstall programs available)
  • Run the CSCleaner tool and remove Acrobat.
  • Reinstall Acrobat X via Adobe Application Manager (creative cloud subscribers) or your Installer CS6

  Concerning

  Baudier

• Dreamweaver 20141 - when I want to save a file after a change, never stop the process and Ineedto kill the application.

  OS X 10.10.1 - Dreamweaver 20141 - when I want to save a file in my local site after a change, the process never stop and I need to kill the application. If I put my local site on an external drive, change a file, a record, it works perfectly.

  I found the solution to my problem on

  Dreamweaver 20141 Build 6947 (Mac) - except problem