Welcome screen freezes

Similar Questions

• The Welcome screen freeze

  I use Vista and now my laptop screen was immobilized on the Welcome screen and goes no further.  I can't get to the next screen by doing a Ctrl alt del.  The causes?  Solutions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro U300 (PSU31E) - freezes on the Welcome screen

  Hi all

  I have a Toshiba Satellite Pro U300 model no notebook 01900REN PSU31E purchased as new and connected to Windows XP.

  It worked perfectly fine for about a year until very recently when it started freezing on blue welcome screen. I had to disconnect the battery because it has not proceeded past the blue welcome screen. I ran the antivirus avast but it nothing of the detected note. Now even when I disconnect and reconnect the battery the screen does not go beyond the Welcome screen blue even if the mouse is moved again, and occasionally the pointer arrow-pointer to sand-clock pointer initially and then rest as arrow-pointer changes. Pressing buttons, Ctrl + Alt + Delete, using the mouse or the battery are not any good.

  I backed up things but not until recently. Please help me, I'm an amateur like these sorts of things, I'm English teacher from teaching professional so I really need materials and capabilities of the laptop. What should I do, please help!

  Thanking you in advance,

  Hey the view,.

  Have you tried the same thing in safe mode? Go to the advanced boot menu by pressing F8, select Safe mode.
  Check it!

  It of really difficult to say why this is happening but if it doesn t work I think that it s time to reinstall Windows. So take the Toshiba Recovery disk and boot from it. If you follow the instructions on the screen you get factory in minutes! :)

• GeForce GTX 760 freezes in HP welcome screen!

  Hello
  
  I have a problem with the installation of a new VGA on my HP pavilion HPE-H8-1206eo.
  
  I am installing a gigabyte GeForce GTX 760, but it won't work. The screen freezes in HP welcome screen and the BIOS issue a couple of times.
  
  The VGA is compatible with my system?
  
  I improved my diet, uppdated my BIOS, tested the VGA in another system, restarted with the new drivers, but it won't work.
  
  Can you help me?
  
  Magnus

  Well, if the new video card is equipped with a UEFI bios, it may be not compatible with your motherboard bios.

• While trying to connect to my account welcome/login screen freezes. I don't face the same thing with other accounts.

  Original title: the Welcome screen problem.

  Hi all.

  I recently encountered a problem with my registration in my profile of windows 7.

  I start up my computer, and all seems well until I try to connect to my profile. He goes to the Welcome screen and stays there. He made no progress still do it. When I connect to other profiles on my mobile Samsung NP300V5AH, they proceed without a hitch. I don't know what the problem is, and I would really appreciate the help.

  See you soon.

  Hi Aden,

  Thank you for posting your request here in the Microsoft Community and we appreciate it.

  This issue may have caused due to the profile of the user related issues. I would like to know some information about this problem so that we can help you further.

  1. do you get any error code or error message while starting?

  2. the question facing you with the administrator account?

  3. have you made changes on the computer before this problem?

  I suggest you try the procedure described in the following article from Microsoft Help to fix the corrupted user profile and check if it helps. This article consists of the steps to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  What is the related issue of programs, this might have caused due to files corrupt in the administrator account. I suggest you try to fix the corrupted user profile and check whether or not this is also corrected.

  You can also try the steps in the following Microsoft Support article and check. This article consists of the steps to troubleshoot issues when Windows freezes or crashes.

  http://support.Microsoft.com/kb/2681286/en-us

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Please reply with the status of the issue so that we can better help you.

• WITH video card driver, windows freezes after 10 seconds after the Welcome screen, WITHOUT a driver, it works fine

  Hi guys,.

  I recently had the problem that when I start my computer, it freezes after 10 seconds when I saw the Welcome screen.
  I'm in safe mode, it works perfectly fine. I have uninstall ALL my Nvidia drivers and then restart the computer in normal mode, and then everything works fine. I go to the Nvidia website again, download the latest drivers and the same freezing problem happens again. I also tried with older drivers provided by Nvidia, still the same problem.
  Completely, I formatted my HDD and reinstalled Windows 7. I install drivers Nvidia and the same problem again.
  I have a Nvidia Geforce 250GTS
  The processor is Intel Duo Core converted E6850 (boxed)
  4 GB of Ram DDR2 Ram
  East of card mother ASRock G31M-S

  Everyone knows that the problem is?
  Thanks in advance and sorry for my bad English, I tried my best :)

  Hello.

  The video card drivers enable the features of the card to use.  When in safe mode or with no driver installed only the basic functions of the card are used.  If the card is faulty, which is more likely, the defective part of the map has probably come into play with the full drivers installed.  This explains why it works with the Basic setting.

  See you soon.

• Windows Vista freezes on the Welcome screen

  I have windows vista. When windows is booting is stuck on the Welcome screen. I'll repair & restore option and return for a few days and connects properly. After the new updates of windows at the time of commissioning it are stuck on the Welcome screen once again. How do I solve this problem

  Hey sbamel,

  Welcome to the Microsoft Answers site.
  Please restore the system to its state when he worked by doing system restore, in the same way as you did previously. You may consult:

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Once you do the system restore, you should be able to boot to the desktop.
  Now install updates one at a time to determine which update is causing this problem.

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Using Windows Update in Windows Vista
  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  Once find you the update causing the startup problem, after back and let us know so that we can help you.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer freezes on the Welcome screen.

  The Welcome screen comes on instead of take me on my desk.  I found that I can do a ctr/alt/del and that takes me to a screen that gives me options to disconnect, change accounts, etc., and if I hit the button "Cancel" on the screen then I get on the desktop.  What is causing my computer hang up on the home screen?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Home premium freezes on the Welcome screen-

  My father Dell laptop (5 years) has Vista Home premium, and today when it turned on, it froze on the screen of welcome... He tried the Ctrl/alt/del, who brought up a screen with several options, including a summer disconnect, which he did. The computer is off and 2 hours later, he turned it on, and it froze again on the Welcome screen... Any ideas? Help!

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  That way if you have a Dell recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Peut only the boot without failure; A regular boot freezes on the 'Welcome' screen and fades to black

  I use an ASUS laptop and everything was smooth until yesterday earlier.  I tried to start in class and it took a little longer (stopping at the 'Welcome' screen) but I'm starting up normal and thought nothing of him.  I'm going to the House an hour later and try to start and I can just connect to Windows 7 unless I Boot safe with networking.

  I have no idea how to fix this, I have no CD, I have no Windows CD that's at my parents (and anyway was a CD to upgrade), I spent 5 hours essentially pulling my hair out try everything last night and this morning still will not work.  I am now in safe mode.

  I would like to know all the details you guys need and how to get them and I'll probably get them to you immediately because I really need my computer today.  Thank you

  Driver card mother/Chipset should solve this problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Satellite M55-S135 screen freezes and becomes white.

  Recently, my computer screen freezes until I have the touch. I touch the screen I use the computer or the screen turns white and everything I type does not register on the screen. I see not the entrance until I get the screen and hold it pressed. Sometimes even if I hold the screen I can not imput to register, it will just white. Anyone know why this happens.

  This happens when the displaycable is not correctly connected to the control that is located at the top of the LCD screen. I highly recommend to send your machine to a service partner in your country and let check this problem. It could also be a malfunction of the material of the screen, but not for sure.

  If you want to contact the nearest service partner in your country, click here--> "http://eu.computers.toshiba-europe.com/" then then just go to-> Support downloads & -> support-> repairs maintenance home page &-> find the nearest authorized Service provider

  Welcome them

• ••• I can't open iMac, the screen freezes •••

  Hello!

  My name is Nana {a women Thailand my English not good} if my English mistakes or incorrect please help...

  I have problems with my iMac model number: A1331

  I can't open iMac, the screen freezes...!

  Follow the instructions in other posts, he suggested I just. Turn and press command + option + p + a. press and hold the button until the screen turns on, then with apple... more

  Yes. I do, but I find that cling to the image of apple on the screen. Or the form. Apple on the screen do... ?

  Next step, I will...

  Press the power button and press in and hold the button options. Then wait for the screen to have the word of MACINTOSHD HD (alone).

  Then, there is an arrow pointing under MACINTOSHD HD... Then, press us the arrow... Then, after that, it goes to press.

  ••• How do I do •••

  And that's important. I have a CD stuck in the machine and can not be removed...!

  Follow the guide, then it doesn't... That said, press the power button and press the mouse, do a right click and hold. Wait until the CD comes out... it

  {Yes. {I, but not work}

  Someone knows how to do!

  Help us please!

  Thank you very much!

  Hi LotusPink,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your iMac. I'm sure we can help understand you what is happening, but we might need a little more detail about what exactly you see. What I understand, you're saying that your iMac's freezing at some point during the boot process and no answer or go further. is that correct? If you can describe the exact screen it freezes, as well as all the details (indicators of progress bars progress, messages or guests or spinning, etc.), which can be useful. You can find the following article useful to identify the different screens you see during the boot process:

  On the screens, you see when you start your Mac - Apple Support

  Thank you!

• The system stops responding at the Welcome screen

  After login, the system freezes at the Welcome screen.  Is it a hardware problem or a virus, a resolution to this?  I have Vista Business on a Dell Vostro 1000 that I bought in 2008.

  Thank you very much for your answer.  Regarding your first method, F8, I already did, but even in Safe Mode, after login it goes to the home screen and stays there.

  Do you recommend that I'm trying to do a "Startup Repair disk?

  Hello

  I see that you have already tried to enter Safe Mode.

  but Safe Mode stops at the Welcome screen too

  Use the startup repair method on that I advised you

  manufacturing and usage of a startup repair disk are your other option

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• screen freezes with Silverlight.exe popup while browsing the Ebay site

  Original title: the screen freezes

  When you use ebay I can navigate easily, but whenever I try to access my ebay VAC a window will appear from "silverlight: exe' application to interact with the prog..." usability or does not allow. the "don't allow" is turned on but evrything is frozen... can't allow or not and cannot close the window or prog... help?

  This seems to have been since I changed psswd, and so I was probly have knocked 'allow', but it won't let me do anything... help

  Hello Jan,

  Welcome to the Microsoft Community Forum.

  Please, try the steps given by Snowy46 on November 28, 2012 in the link below, which will help you to fix the issue with Silverlight.exe jump up while browsing the Internet.

  Silverlight.Configuration.exe

  Hope help you the steps. Feel free to write us at Microsoft Community where you have questions and issues while working in Windows.

  Thank you.

• Windows 8 does not not to the Welcome screen and the start option advanced

  I met a very strange situation.

  1. I first put my system into hibernation and walked away for a while. Then when I tried to turn on the system, it freezes at the Welcome screen. I tried the strok key (Ctrl + Alt + Delete) but nothing happened. I noticed that the ' FN ' on my laptop works very well! I could turn on and turn off the Wifi with them. But the system has not responded to all other keys and my touch pad.

  2. I tried waiting for the system to respond for a long time. When I noticed that the little light on my laptop showing the status of the HDD stopped flashing, I thought that the system could already went wrong so I hard reboot the system.

  3 then, strange thing that happened:

  (1) first is the logo of my BIOS flashed on the screen and disappeared, which has never happened before.

  (2) then the system told me that he prepares the update. But I remember turning off the automatic update and I had not installed update before the system went wrong. Although I remembered that there is a warning to the login screen that there is some new important updates and I should install them.

  (3) the system is restarted automatically when the increase is 30%. After this reboot, the system maintains hang at as before welcome screen.

  4. I've tried several things and hard reset for many times but nothing has changed.

  (1) I tried to disable the quick start to the BIOS.

  (2) I've tried allowing CSM (disable UEFI in legacy mode)

  (3) I tried to press F9 to start and got into the advanced boot options screen. However, all there hang two! My keyboard and mouse are both inadmissible.

  (4) disconnect all connected to my laptop.

  Then I'm lost. I can't repair or restore my system. I think that my keyboard works fine because I can change the BIOS setting to use. Now, I'm at my wits end with. Can anyone suggest anything?

  Update:

  Turned history that I tried to plug my USB mouse to the laptop. It worked, and when I connect my USB keyboard that works too! But minutes after I logged on successfully to Windows, I got the WORKER_INVALID and restart the system.

  I found this post which has almost exactly the same problem with me (I use an ASUS laptop too!). So I uninstalled my driver warned of the gesture, and then the system has not crashed over.

  But my problem has not been resolved. I downloaded and installed the latest driver of ASUS and always found my touch pad and the keyboard does not. I also realize that even in a different operating system on my system (LinuxMint), my touchpad and keyboard will not work.

  To summarize:

  Now I can use an external device (USB keyboard and mouse). But the built in keyboard and touch pad does not work. The latest driver for ASUS (ASUS Smart gesture) and ASUS ATK Package driver does not work. Strange thing is that when I open the computer, can I use my keyboard and even type in the Linux grub shell. But once the system got loaded, both in Windows and LinuxMint, the keyboard and the touchpad don't work.

  Now, I suspect my BIOS went wrong, but I do not know and do not dare update the BIOS so recklessly. Any ideas?

  Hello

  Thank you for the update on the question and good to hear that your problem is solved and everything works well after the replacement of the motherboard from ASUS. This information will help other members of the community to the same question.

  Feel free to post on the forum if you have any concerns more associated with Windows. We will be happy to help you.

  Kind regards