Stacking does not work appropriately for

Similar Questions

• Tecra S1: After the installation of new Toshiba BT stack does not work correctly

  Hello
  I need help on my problem with the bluetooth configuration on my laptop tecra S1 with built-in bluetooth hardware.
  I have a Blackberry 8700 g with bluetooth function and Bluetooth Logitech headphones.
  At this moment, I have download the latest drivers from toshiba:
  Bluetooth stack
  Easy Bluetooth connection
  Bluetooth monitor

  The first time I installed the battery Bluetooth on my Windows XP / SP2 Machine.
  everything is ok...

  On the new start helping him material apears and installed Bluetooth RFBUS from Toshiba and a few more.
  After stopping and restarting, I have a magnitude of the 100% CPU usage.
  I start the monitor Bluetooth an i found new devices, but I can't connect to my Blackberry or my headphones...

  I think that the battery Bluetooth toshiba does ' t works well because there is the battery Bluetooth in XP/SP2 in the depths of the system.
  Can I use only Microsoft Bluetooth or only the Toshiba stack?

  Thanks for your replies
  Mike

  Hello

  In my opinion, you must use the MS Bluetooth stack or the Toshiba Bluetooth stack.
  If you want to know how to remove the battery Microsoft Bluetooth the OS with SP2, see Microsoft Knowledge base article:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;889814

  Good luck

• Focus Stacking does not work

  I tried to find a CS6 forum in which I could put but could not find a forum that I have been accepted to post in, so forgive me for being here.

  I took several pictures with several points of contact, and I'm trying to merge them in Photoshop CS6, but every attempt that I find myself with a single layer that is used, while others show no selection at all.

  Even when only 2 images using the process only uses the first image and sets the transparent mask.

  Here are the steps I followed:

  1. Open each of the images I want battery.
  2. Use the Photomerge with Auto, Blend Images together and add open files. This creates a new image with multiple layers with success, but areas are chosen.
  3. Use auto-merge layers, stack transparent Image tones and colors checked.

  The obvious outcome does not change because the first layer is used.

  What Miss me?

  Tom

  I suggest to use the feature file - Scripts - load files into stack instead of Photomerge, because it is more directly what you are wanting to do.

  Your images have a lot of noise that might be misinterpreted by the stacking process in detail?

  -Christmas

• EPUB 3 - buttons stacked does not work

  Hello!

  I'm designing a digital catalog of luminaire, which seem like EPUB 3 layout sets.

  I have the following problem with stacked buttons:

  There is a navigation menu that appears with an animation when I click on the button "+":

  (The used action is "show and hide buttons", everything on the menu is a big button)

  

  Then the menu with other options of luminaires watch out:

  

  But, all the buttons below the menu nav simply doesn't work in any case:

  

  I searched the internet about it, but the only answers I found was on the stacking order in interactive PDF files.

  ( http://indesignsecrets.com/stacking-order-bug-exporting-interactive-pdf.php )

  But, this isn't the same case, I have no problems with the order, but with the function.

  Can someone help me?

  Thank you!

  Looks like a multi state object would be a much better choice for this.

• I have windows 7 (64-bit) and my DVD - Rom drive does not work. For some reason, that I disabled it, how can I activate it? Thank you, Billy

  This issue should really be down here. There is nothing to add.

  Thank you
  Billy

  Hi Billy,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, you have problems with activation DVD ROM.

  Have you tried the steps suggested by Sandeep V from the link below?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-am-running-Windows-764-bit-and-my-DVD-ROM-has/0e7c6ec1-e61c-40af-8d88-af816681e1ba

  Answer to us if you have problems with activation DVD ROM or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Just updated to IOS 10 and replace text does not work

  Just updated to IOS 10 and replace text does not work.  For example typing in omg should show oh my God. Has anyone else got this?

  I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?

• Blocking Cookies, something does not work on several sites.

  When I block Cookies, something does not work.
  For example, to twitter.com (of cource displaying the connection or the login page, since cookies off).
  Drop-down menu language selection don't work. and I can't get anything to textbox on password.
  I know that I can not connect when off cookies.
  I want to know the reasons for which some components do not work.

  Sites can keep track of you among thousands of visitors by adding a unique code to address either by the use of cookies. If the site only uses cookies, blocking cookies will make each application looks like a new visit from a stranger. Configured with a single application preferences will be lost on the next page load.

  That shouldn't stop you from typing in a form, but the site may have a script that checks if you accept cookies and different features on active and disables the basis on what he discovered.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you use the Clone Stamp tool CS6 the alt key does not work?

  Just recently, my mouse have misbehaved and touched my CS6 when I was working on a photo. The result, my alt key does not work. For example, when I use the Clone Stamp tool, I can't sample as the alt key does not work. Even in ACR, the alt key does not work. When I drag the 'white' to the left while pressing the ALT key, the screen turns black.

  Help, please? Thank you

  Steven Teo

  Hi Steven Teo,

  You are able to use the ALT key well otherwise on your computer?

  You can try to reset the Clone Stamp tool.

  To reset, follow the instructions below:

  1. Select the Clone Stamp tool

  2. right click / Control click dropdown at the top left

  3. choose Reset tool

  

  Hope that helps.

  Kind regards

  Assani

• Replace with After Effects Composition does not work in the first

  I get the message "the importer reported a generic error.  I tried it on clips without effects and normal rate 23.98, and it still does not work.  I installed CC cloud and it's a brand new IMac, so I am at a loss as to why it does not work.    For any help or suggestion would be greatly appreciated!  Thank you very much

  Don't use tracing with AE CC 2014.  It doesn't help.  It is preferable to use C4D Lite, which now comes with AE and is much better... and it does more.

• Copy / paste does not work in vCenter 4.1.0

  ESXi 4.1

  vCenter 4.1

  Guest operating system in question: Windows 2008 R2 x 64 Standard

  I can't copy or paste the invited vSphere with vCenter client host and vice versa.   I'm provisioning virtual machines from a template.  Basically, I converted a virtual machine into a template and used with the Customization Wizard to supply the new virtual machine.   I imported an unattend.xml file in the Customization Wizard.   VMware tools is installed.

  I googled and found that the inability to copy and paste inside the guest OS is a default behavior for 4.1.  So I followed the work and edited the file/etc/vmware/config with the following two lines and restarted the virtual machines.

  insulation. Tools.Copy.Disable = "false"

  insulation. Tools.Paste.Disable = "false"

  No chance!

  Then, I created a new virtual machine from scratch and attached the VMDK from the former VM.  Now I can copy and paste without problem.  So, it seems that the customization process is the culprit.   I can't create virtual machines from scratch.  How can I use my template to provision VMs without the problem of copy/paste?

  Thank you

  A restart of the host is not required, it is the virtual machine that needs to restart.

  What you need to do is to power off the virtual machine and then put the new one. Not just restart the guest operating system.

  If this does not work, thanks for posting the vmware.log file of the virtual machine file.

  André

• Number of features in the CONTAINER does not work

  Hi all
  I was working on a simple word processor for the local language using JTextPane and RTF. The program works fine in Netbeans. But the JAR file does not work. For example, the program should save on the hard drive but also to read the file. The JAR version does not work so that it works correctly in Netbeans. The JAR is created using Netbeans. Can you help me?
  
  Thank you.

  (1) we have no idea what class instance "editor" made reference.
  (2) always specify the character encoding when reading and writing the characters or you plan to use the encoding that may or may not support characters to work of characters by default. You can use OutputStreamWriter and InputStreamReader in order to be able to specify the character encoding. I suggest that you use "utf-8", given that it will work for all UNICODE characters.
  (3) your exception handling throws away most of the useful information. Most of the logging system to pass an exception without having to convert to a string.
  (4) Please use

   tags to make code readable.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            
  

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• IOS10 email for signature markup does not work now.  Help, please!

  I used much markup of the email for signing off e-docs.  However, I found that it does not work now after the upgrade to iOS10.  After set up my signature recorded and distributed, the beneficiaries, said the e-docs they received was not my signature signed on them (which was in previous iOS).

  That it would be much appreciated if someone could help solve this problem.  Thank you.

  It might be a bug in iOS 10.  It might be helpful to reach out to the Apple support for him noting if this is a bug.