Problem with Vista Home premium SP2 update

Similar Questions

• Strange problem with Vista Home premium configuration update

  Just bought a Toshiba Satellite Pro L300-1AI which was preloaded with Vista Home Premium.

  Clicked on configure updates on the front screen and he entered a loop that says: Configuring updates: stage 3 of 3-0% complete. Do not turn off your computer.

  Every 5 minutes or so then stops and restarts with the same message. I left on for 8 hours, so can not believe he needs for this long. Just tried to set off, but when you restart it defaults as shown above.

  Please advise... even if you can get me right back to the normal screen before

  Hello

  Try please start your computer in safe mode and restore your operating system to an earlier time (before the update). Maybe this will help.

  In the future be careful with updates. I recommend you to disable the automatic update. Just check the list with updated supply and install important and recommended only. Disable all optional updates. You don't need them.

• Intel 4965agn wireless wrong with vista Home premium sp2

  recently I had to reinstall vista (clean install of 2007 system disk) due to an unknown problem that caused the ms does not recognize my installation as "authentic." The system is updated after a week of daily updates. before this problem my wireless connection worked continuously for years without problems. I remember having some problem with it before sp1, but certainly no problems since sp2. Since the reinstallation, I was not able to get the wireless to work. Device Manager indicates Intel wireless wifi link 4965agn works fine, but the diagnostics windows network says "intel...» 4965AGN"knows driver or hardware related issues. I tried updating to the latest driver for vista (32 bit) intel (13.2.1.5) and the issue has not changed. I have a gateway with processor nx860xl intel core2 t7200 cpu and 2 GB ram.

  Does anyone know a solution to this problem? How do I can diagnose to refine the cause to the driver or hardware or system settings or registry errors, etc.? Is there another driver who would be better suited or I'd better go back to XP or forward for win7? I have never had to reinstall older XP on my laptop. It was the 3rd or 4th reinstallation of Vista (although the last one was a good two years ago). I just want to get the wireless working again, so I must not be attached to my router for internet, etc.. Thanks for any help or suggestion.

  Hello

  Connect you to the support page of Intel card download the latest Intel drivers and update any drivers you have now.

  After installation, make sure that the Intel Wireless utility is not running in the background. Turn it off and get out of the startup folder.

  In general

  There is an inherent Catch22 to attempt to repair a computer wireless through wireless. Given that the without wire is not connected to the source, there is no interaction between the wireless source and the Wireless Client and no frame of reference to find what works and what does not.

  As a first step, I will temporarily move the computer to a place close to the wireless router and plug with a wire.

  When he works with a wire, switch Off the Wireless Security in the router, disconnect the wire and try to make wireless work. This must be done when the computer is always close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

  In the computer itself.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.
  

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• STARTING PROBLEMS WITH VISTA HOME PREMIUM

  9 times out of 10 that my computer will not start, it gets insofar as the bar goes from left to right, then it freezes and sometimes the Startup Repair will kick once if that works very well done, which is until I turn it off Green and I have to start the same process everywhere. I created a restore point that goes well before that time that I started to get into trouble, but it always crashes on startup. any help would be appreciated.

  Try this:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Home Premium SP2, update KB2482017 failed, error 8024200d

  This update will fail. Ive tried several times, restarted my computer laptop but always fails. I tried to use Microsofts System Update Readiness tool, but it did nothing. Ive tried to run start / all programs/accessories/Tools System/Disk Defragmenter and disk cleanup. None worked.  Any suggestions what I can do next? Thank you very much

  Hello

  Thank you very much. I applied the method 1 and the installation was successful. Thanks, you're a star!

• Garmin iQue 3600 PDA/GPS map loading problems with Vista Home Premium 64

  I can download the Garmin DVD for my hp computer but the operating system does not recognize the Ique 3600 device on the USB port.
  How can I get 64 WV to recognize and download on my Garmin?
  My Toshiba 32 bit system works well, but it takes hours to download a complete set of cards.

  Thank you;  j.Kuss

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• I bought a laptop HP of Costco comes with Vista Home Premium but now I have Validation Code 50. Invalid license.

  Problem with Vista Home Premium Validation

  I bought a laptop HP of Costco comes with Vista Home Premium but now I
  Validation code 50.  Invalid license.

  Validation of Windows through web just hangs.  The key of product or paper plate
  at the base of the laptop is worn out and not readable. I don't want to reformat my drive
  or reinstall my software applications.  What is the easiest solution?  The cheapest?

  There must be a mistake that is not my fault.  Is it possible to validate my particular
  laptop if I provided the results of you and MGA diagnostics validate on your side?

  Hello

  I suggest you contact HP support for assistance.

  http://WWW8.HP.com/us/en/support-drivers.html

• I can't disconnect or change user account after update vista Home premium SP2

  Acer e380 with vista home premium 32 bit OS 3 G of Ram
  After the SP2 update successful that I don't then log off user accounts or to switch between user accounts

  When I choose logout of the system never disconnects, and I have to hard start
  When I chose to change username the same thing happen it never disconnects and I have to hard start

  I can access my different user accounts when restarting individually well but is not a viable solution as long as switching user accounts and logout worked just find before the SP2 update

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. Chances are that the "remains" of Norton here is your troublemaker.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall Norton Security Suite [or keep constant Protection Suite if you are a Subscriber Xfinity] and LiveUpdate and start any Norton Add ons via | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  [Should be automatic, but I want you to check again.]

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #8 below!

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  6. OPTION A: do a clean install of Norton Security Suite [or keep constant Protection Suite]; Follow all the instructions.

  NOTE: Do not activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  OPTION (highly recommended) B: Install Microsoft Security Essentials (also free but MUCH more reliable & less annoying).

  -Online do NOT install applications as well !<>

  7. If you take OPTION A to #6, manually & repeatedly run LiveUpdate (Norton) until you get a "not more than updated" or similar prompt.  Otherwise, skip this step.

  8. right click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  9. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  10. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  10. b double-click the file that you saved in # 10 above & accept invites him to MERGE with the registry data.

  11 restart again.

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  13. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  13 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  c. 13, without taking into account of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  14 restart once more and then run a manual updates & install any/all the updates available (for example, KB2722913 or higher); Follow all the instructions.

  15. open Internet Explorer (only!) to http://java.com/en/download/installed.jsp & make sure that the test shows that Java Version 7 Update 7 [for Internet Explorer] is installed.

  16 get Adobe Flash Player v11.4.402.278 (or higher) installed NOW! Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46252

  17. While you're at it, make sure that Adobe Reader or Acrobat v10.1.4 is installed (assuming that one is your default PDF reader)-online http://aumha.net/viewtopic.php?f=26&t=46241

  18. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Display problem of links 2003 with Vista Home Premium 64-bit

  I just got a new office to replace my 6 1/2 years and am all migrant to the course. The new computer
  CyberPowerPC is: Intel I7 3.07 ghz, 6 GB triple channel ram, dual 500 GB HDs and Sapphire ATI HD 4870 1 video.
  I have migrated almost anything and almost everything works, including some games of the 1990s (original Unreal Tournament, etc.)
  A game that is driving my crazy is Links 2003 (v1.05). When I run the game, on the start screen, it says "3D Graphics".
  by ATI Radeon HD 4800 ". However, when I go into the graphics settings, the adapter box is empty. Using the drop down.
  I select my ATI Radeon 4800 Series card.  I can get the error message: "your ATI Radeon HD 4800 Series is not responding.
  Requirements minimum links. The software rendering engine will be used instead.  WHAT?  My old system uses an ATI X 1650
  video card that is not 1/4th the graphic power of my new card and it works fine.  I tried the latest version of the video driver
  from ATI (catalyst v9.6), which is what works on the old computer. I've also restored to v9.3, that does not work.
  I know it must be possible to run Links 2003 on Vista, because it is running on my laptop HP DV - 9550 T lan party, which is also
  Vista Home Premium SP2 running. The HP laptop with a Nvidia 8600 M GS video chipset, once again, no where near as
  powerful that my new card 1 GB ATI HD 4870.  What is going on?  Is there a registry hack that I can do to force the Links 2003
  to use my new card?  I contacted ATI/AMD and Sapphire, and they are both as baffled as I.  Help, please!
  cooncat at gmail point com

  I found a resolution.  There was a patch for this game released last year, June 2008. It's
  version 1.07.  After you apply the patch, the game works perfectly... in fact, better than
  never before, because there are new features.  Patch is available at:
  http://linkscorner.org/index.php

  Thanks for your attention

• Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.

  Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.  Have tried little about everything without success. AV is Microsoft Security Essentials, Norton has preloaded, ran Norton total clean. Don't know the last updated time to race day, I re-load of updates (right term?) who cleaned the logs.  Have the free version of Malwarebytes, run regularly, nothing comes.

  Fixed, had run as before, but didn't save Subinacl desktop instead of folder mentioned in fix

• Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Greeting cards

  Hello

  Is it possible to update the version of paint which comes with vista home premium to the version of paint that comes with Windows 7?

  Hi, the paint that comes with Windows Vista is designed by default design. See the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

  It will be useful.

• Error 800b0100 KB2564958 Vista Home Premium SP2 32-bit.

  I am experiencing 800b0100 error when trying to install KB2564958 on Vista Home Premium SP2 32-bit.  I ran the system update tool and tried to download and manually install the KB2564958 without success.  Any ideas?

  A repair installation isn't a big problem if you have the right drive. A new clean install is a much larger task.

  Notwithstanding, there is no certainty that it will solve the problem but it is very unlikely to harmful effects on the system.

  The missing file is a strange situation. It is formally identified in the Article, but on a Vista computer that I have here, there is no sign of the file. The difference with your computer, is that my updates normally and your not.

  These links can help you find a solution:
  http://support.Microsoft.com/GP/wupd/en-GB

  https://support.Microsoft.com/OAS/default.aspx?&Gprid=6527&&St=1&wfxredirect=1&SD=GN

• I am trying to install KB2564958 on a Vista Home Premium, SP2, but it fails

  I am trying to install KB2564958 on a Vista Home Premium SP2.  This update fails and when it is installed as well as other updates, they ALL fail.

  What is an update that I should get, or can I just ignore it, if it's a need, how to install?
  
  The computer is 64-bit and 4 GB of RAM, AMD Quad-Core processor running
  Bobbie2836

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Method 1:

  I suggest you to follow the links and check out them.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  I suggest to perform the clean boot and then try to install the updates and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• 0x8007001b with Vista Home Premium Center backup and restore backup failure

  I have my Toshiba Satellite M205-S7452 with Vista Home Premium for about 8 months, and November 2007, backup windows, and restore program worked flawlessly. I was able to back up my music, photos and documents to a DVD on a regular basis. But then I started having an error halfway back up that says "drive cannot find the sector requested" with the 0x8007001b error code. It seems that the backup works partially - there are files on the DVD player but I don't know if it ends or not. I tried to do some research on Google and it seems that there is other people affected by this error, but I could not find suggested patches.

  Hi jennielah,

  Please use the Forum of the community for Vista.

  If it has started, use the system restore back to a point before you start. See below for instructions.

  If you can do that I have a work around you. Your specific error seems to relate to update failures, not only the Windows updates but the various failures of update.

  The job is to save it to your hard drive and copy the files on the DVD after the fact.

  I hope this helps.

  Please let us know if we can do something else.

  The System Restore tool

  Other troubleshooting methods, such as using the System File Checker tool, cannot solve the problem. If they do not resolve the problem, and the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time.

  The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start , type system restore in the Search box, and then click System Restore in the programs list.

  If you are prompted for an administrator password or a confirmation, type your password or click continue .

  1. In the System Restore dialog box, click choose a different restore point , and then click Next .

  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next .

  3. Click Finish .

     The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Here is a link to the system restore, if you would like more information

  http://support.Microsoft.com/kb/936212/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.