Standard Vista user log on the back no newspaper but newspapers...

Similar Questions

• User logged on the server over the RDP session - Small Business Server 2011 x 64

  We have a Small Business Server 2011 standard x 64.  We have the configuration of the remote desktop on port forwarding in the firewall to allow a user to connect to this server using RDP remote desktop.  This isn't a server terminal server.  No, there are no available Remote Desktop Manager settings.

  When the user connects through the RDP application and connects to the server.  If the users session is idle for 15 minutes, the user is connected to the server (not disconnected the RDP session, just to connect to the server).  The user must log into the server every time that happens.  We tried adjusting the Remote Desktop Session Host settings and changed the Session time limits, but this isn't the parameter we are looking for.  We have looked extensively through the default domain group policy and see nothing active to this behavior.  We examined local group policies and studied the session time limits in the user and computer configuration > policies > models Admin > RDP >... session host and it is has anything configured here which could trigger this behavior.

  Yet once, it connects the disabled user, not closing the remote session.  We have also examined the user account for this user and looked for resume posting require logon settings (although with SBS, it is not even there to adjust the display settings).  I had partner Microsoft supports focus on this during one hour (he didn't use too much of my time to support) and they have been unable to resolve within an hour.

  Help, please!

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Authenticate when the user clicks on the "back" button after disconnection

  Hi all
  
  Is there a way that the user can be required to authenticate, if simply disconnected, then click on the back button.
  
  I have a situation where a user who works on relatively sensitive data disconnects (yeees they should close the browser and all, but they never obey instructions...) and someone else can come around and click on the back button and see it as what he had worked on.
  
  Is it possible to disable this behavior, or otherwise force a reload/re-authentication.
  
  Thank you.

  Hello

  You can do this by writing this code in each page of your application

  Write this in the html header:

  and write it in the Page HTML Body attribute:

  onunload="javascript:history.go(1)";
  

  It will not allow users to go back.

  Thank you
  Tauceef

• How to get the user name of the user logged into the E-Business Suite in OFA

  Hi all
  
  I developed a few screens in OPS and recorded also in Oracle applications. I need to enter the user name of the user who has logged in to the E - Business Suite to access my Application OFA, so that depends on his user name I will post a welcome Message on my screen.
  
  Can someone please suggest how to achieve?
  
  With our thanks
  Gerber

  Use pagecontext.getuserId or pageContext.getUserName in your controller

  Thank you
  Kassy

• We get a blue screen with no error message when the user arrives in the morning... but not every day.

  Have a user who was the bluescreen with no error message when she arrives in the morning. This doesn't always happen.  But when it does, it must do a hard boot of his computer. It runs XP SP3, and it is on a domain. Another user reports what is happening also, but not as often.

  Yet once, it is not consistent where it happens every working day. It's maybe 1 or 2 days a week, if that. Hibernation is disabled and power options are set to never turn off.
  If this is not enough information, I will be happy to provide more if necessary. Any contributions to this issue would be appreciated.
  Thank you

  This may apply . But this message does not resemble a BSOD / crash

• Windows Vista Server Log-on the question

  When I try to log on to a file server, I get the user name and password window. My computer Windows Vista keeps adding the name of account before the user name when I click the OK button to open a session. Of course, it then then tells me I have the wrong user name or password. Anyone know how I can disable this function?

  Hi Dave,.

  Since your question involves the use of the file server please join the TechNet community for assistance. They specialize in THIS type of environment Pro and will be better suited to help you.

  TechNet community

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/threads

• deleted a vista user was copying the documents and photos to the account administrator but does not

  I deleted a user account and has been invited to have the docs and images copied to the administrator account. The name of the copied file appears on the desktop, but there is no files in the breast.

  Hello
   
  Whenever you delete a user account, you will be prompted to "Delete" or "Keep files" and continue with the deletion of the user account.
   
  If you choose "Keep files" when the user account is deleted, by default, the files and the data user is in \Users folder, where is the location where windows is installed for example C:\.
   
  For example, if you deleted the user account 'Test', then the details will be available here C:\Users\Test.
  We recommend that you place in the users directory and check if there is no file.
   
  NOTE: If you choose the option to save files i.e. "keep files" then delete the user account, nothing much can be done to recover the files.
   
  For more information on user profiles, see this link: http://windows.microsoft.com/en-us/windows-vista/What-are-user-profiles
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I download free CD Rom / software to play DVDs on my HP G60 which uses Vista. Everyone on the web is free, but it is not. I can't play all movies now or listen to CD

  I have Vista (32 bit) and I somehow deleated the program.

  Please visit the HP herewebsite, and then follow the instructions below:

  1. Select your exact product model.

  2. Select your operating system (in this case Windows Vista)
  3 scroll until "software - multimedia.
  4. click on the download button next to the software to play DVD HP
  Install the software and you should be all set.

• For some reason, Firefox is not saving my WHOLE story. The back button works, but I can't open recently closed tabs, save the tabs for previous visits or discovers even of the history - it is simply not there. Why my computer won't save the history?

  I can navigate backward and forward in a tab, or in the session browser, but as soon as the tab or the session closes it is like all the record is erased from my computer. I don't know if the problem is my computer or firefox, but it doesn't seem to be anything like this mentioned there and I would really appreciate the help.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_places-database-file

• SBS2003 deleted files back after the user logs off and logs on again

  This symptom started the first time, the user connects to the server using RDP but continues even when the user is connected to AD locally. The profile is growing in size. Someone have a solution?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public to Server Small Business SERVER 2003 on the TechNet site. Please post your question in the forum TechNet Small Business Server. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads

• Asking the user to change the password after the first login.

  Is someone can you please tell me what the procedure is to require users to change their password when they first register an APEX application?
  Please provide detailed examples.
  I guess I have to write a process, probably in the login page and then create my own page to enter the old and new passwords. I then define the branching right, etc. in order to integrate this page with the rest of the application. Is there a standard way to do this? It seems to me that it should be.
  Thank you.

  If you use the authentication method the APEX, try the following:

  The form of departure in the APEX that displays all of the applications that you have installed, right side, administration section, manage users explicit application, click this item.

  If you add a user, then click on the button create and enter the relevant information.

  If you already have an existing user and I want to just change them, click on the user icon.

  To set the password needs to be reset during its first use, under the control of the accounts, click the menu drop down require the change of password on first use and select Yes.

  Save the user, and the first time the user logs in the APEX, they will have to reset their password.

  Is that clear enough to follow?

  On a side note, I STRONGLY recommend that change you your scheme of authentication or Custom database driven, since the APEX authentication scheme is used mainly for developers...

  Thank you

  Tony Miller
  Webster, TX

• Sticker license Vista slowly disappears from the Satellite L300D-148

  ... from the back of the laptop. I hope you know what I mean.

  The Vista license sticker on the back of my L300D-148 is due to normal use slowly "vanishing", some letters are not legible more, but the license key itself is still.

  I can remove the sticker by myself to protect it from the damage or what I lose my guarantee that?

  I hope you can help out me.

  Kind regards

  Rantanplan

  Hello

  Of course, you can remove this sticker if you wish. This should not affect the warranty.
  But just note buddy;
  This serial key cannot be used in other Vista operating systems.
  This serial key belongs to the image of Toshiba Vista preinstalled, which belongs to the OEM license.

  Good bye

• Display user logged into a workbook DI ADF

  Hello
  
  I need to view in my workbook DI ADF the user logged in the following way:
  -When you press the "connect" button, the user of the connection should appear
  -If the logout button is pressed, the message "offline"(ou quelque chose de significatif pour l'utilisateur final) should be displayed ".
  
  I have a 11.1.1.4.0 JDeveloper and I use Excel 2007.
  
  Kind regards
  
  Alex

  Hi Alex,

  At this point, there is not a way to get the functionality of desire.

  Juan Camilo

• Essbase user to calculate the business rule Planning

  Hi all
  
  Where can I change the user Essbase calc planning HBRs in 9.3.1?
  
  When users run HBRs in planning, the same user Essbase is always used. I thought that planning used the user specified in the data source configuration, but it doesn't seem to be the case.
  
  Thank you
  SEB

  Hi Seb,

  When a user runs a business rule in planning this specific user will contact HBR and the user essbase defined in the application data source will communicate with essbase.
  It should also propose that in hbrlaunch.log the user HBR and essbase user.

  Just to be sure I did a quick test and changed the essbase user in the data source, restarted the planning. logged on as a user and ran a business rule, the newspaper showed the essbase user, that I've changed in the data source.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• for relaxation: where is the table created by the Wizzard users create in the APEX?

  Hello everyone and Tony in particular since it was followed and mentoring my progress on this.
  
  Well,.
  
  Here we have 2 things:
  
  
  
  (1) when the wizzard of Administration > database > manage users creates a user. Where is the table it creates? What name does have? Why is it not visible in the object browser? I need the name of this table to put it on my trigger (I called users_table)
  
  
  
  (2) how to do that whenever a user connects, his formerly generated by the trigger sequence is used by a State to extract personal data (it's sort of VPD) in this case would be, how do you know what surrogate key, we need to call. To do this, I think, the thing would be to request the: = APP_USER (that was created in step 1) and each APP_USER will surrogate that are associated with this key.
  
  
  
  I set up a simple trigger, but just the substring of the concatenation of the given username, the system randomly generated pwd up to 12 characters.
  
  
  
  CREATE OR REPLACE
  GENERATE_SEQUENCE RELAXATION
  AFTER INSERT ON USERS_TABLE
  FOR EACH LINE
  BEGIN
  insert into users_table (surrogate_key)
  values (SUBSTR (¦¦ username password), 1.12);
  END;
  
  
  but as I said, this users_table must be the table where the wizzard to create users stores its data,... .but where is this table?
  
  
  Thank you very much
  
  Alvaro
  
  Published by: Alvaroe on February 6, 2010 09:13
  
  Published by: Alvaroe on February 6, 2010 10:00

  Hello

  (1) create a table and then start filling in

  I think you need to have a custom table of your patients (and users), say,

  CREATE TABLE patients
    (
      "USER_ID"   NUMBER,
      "USER_NAME" VARCHAR2(100 BYTE),
      "FIRST_NAME" VARCHAR2(100 BYTE),
      "LAST_NAME" VARCHAR2(100 BYTE),
      "PASSWORD"  VARCHAR2(4000 BYTE),
      "CREATED_ON" DATE
      CONSTRAINT patients_PK PRIMARY KEY ("USER_ID")
    );
  

  you need to build customized in your appl authentication and do not use the Apex or Db authentication.
  To do this, you must do this table in the schema that is used in the analysis of your application's schema.
  And you need create the function custom_hash like this:

  create or replace
  function custom_hash (p_username in varchar2, p_password in varchar2)
  return varchar2
  is
    l_password varchar2(4000);
    l_salt varchar2(4000) := '55PSP4P78JLDQ2AMBXQ60DW9OW7G9Z';
  begin
  
  l_password := utl_raw.cast_to_raw(dbms_obfuscation_toolkit.md5
    (input_string => p_password || substr(l_salt,10,13) || p_username ||
      substr(l_salt, 4,10)));
  return l_password;
  end;
  

  (2) then build the trigger when it detects that I completed a line
  It generates this sequence AND inserts it into another table (as you say, I could not put it in the same table)

  users must register themselves?
  Or register?
  Then you must create the free registration form or a form where you fill in your table above users.

  I think that your user_name must be unique. Put a Unique about this strain.

  When creating the patient button is pressed, then the above table is filled (you must and name, user in the form fill password)
  You must calculate USER_ID, user_name, password and created_on, this can be done in the trigger

  create or replace
  TRIGGER patients_trg_bi
    before insert on patients
    for each row
  begin
  if :NEW.USER_ID is null then
      select patients_seq.nextval into :NEW.USER_ID from dual;
  end if;
  
  if :NEW.CREATED_ON is null then
      :NEW.CREATED_ON := SYSDATE;
  end if;
  
  if :NEW.USER_NAME  is null then
      :NEW.USER_NAME  := :NEW.LAST_NAME || :NEW.USER_ID;
  end if;
  
     :NEW.PASSWORD := custom_hash(:NEW.USER_NAME, :NEW.PASSWORD);
  
  end;   
  

  you create the sequence of patients_seq

  In this case the surrogate key be hashed password.
  And you can use it by selecting table using patients: APP_USER
  that is when the user is connected to his USER_NAME, variable APP_USER is filled

  (3) then, the SQL query would recover this surrogate_key and show as connected individual data.

  Yes, when the user logs on, the key is populated by users based on table: APP_USER
  using

  select password
  from patients
  where user_name = :APP_USER;
  

  You must understand how EVP can be implemented at the Apex.

  You can use any application for this SURROGATE_KEY say

  which is calculated by Application of calculation on the new Instance

  4) but in order to know what to ask, surrogate key should be a key with the substitution APP_USER connection

  is that correct?

  Yes. You have the info from the users table

  Do you have examples of Applications Apex somewhere.
  If you use Apex 2.1, you can install it from the repository and if you have 3 Apex, they are normally automatically installed if you create the new workspace.

  You can use it a lot to manage users.

  Concerning
  Oleg

  BTW,

  Alvaro,
  Yo have your appl?
  If you sent your Db and tables all the Pl/SQl, as well as application Apex, you have for me by email, I can check and make/suggest improvements
  (For free, of course)
  I need to check what you did there, otherwise it seems to be a very long subject.
  Well, I have the time to discuss

  Yes, you can make the trigger like this

  CREATE OR REPLACE
  GENERATE_SEQUENCE RELAXATION
  AFTER INSERT ON USERS_TABLE
  FOR EACH LINE
  BEGIN
  insert into GENERATED_SEQUENCES_TABLE (lastinserted_name, surrogate_key)
  values (SELECT name from USER OF USERS_TABLE WHERE USERID..., SUBSTR (lastinsertedname¦¦ password), 1.12);
  END;

  but where the values are made here
  SUBSTR (lastinsertedname¦¦ password), 1.12

  Published by: oleg.lihvoinen on February 6, 2010 14:55