SBS2003 deleted files back after the user logs off and logs on again

Similar Questions

• Impact of setting the interval partitioning off and then on again

  Hi all

  Have discovered that to split the partitions of a partitioned table Beach-interval, in that we need to define the partitioning interval all issue the command split then on again.

  e, g.

  ALTER TABLE retailer_transaction SET INTERVAL ();

  ALTER TABLE POR2_retailer_transaction

  SPLIT PARTITION PART_400012 AT (TO_DATE (' 2020-09-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))

  INTO (PARTITION PART_202008,

  PART_400012 PARTITION)

  ALTER TABLE retailer_transaction SET INTERVAL (NUMTOYMINTERVAL(1,'MONTH'))

  Everything we need to pay attention to that?

  Using oracle 11.2.0.3

  Thank you

  You can NOT split the LAST (most HIGH_VALUE) partition of a partitioned table interval interval. You can only separate partitions BEFORE the last. Which converts also all partitions from the bottom (split and below) for the partitions of the RANGE.

  If interval partitioning will only apply to data added above the transition point (the score higher.

  To return to your original question. To split the LAST interval follow the procedure described in your original post

  1. range partitioning

  2 split the partitioning

  3 set the partitioning interval on

  Conclusion with this however when adding data back to a nine month doesn't automatically create the partition again.

  This "new month" MUST BE above the point of passage for a new partition to create. In your code example, this point of transition is for the year 4000.

  This works very well for me:

  ALTER TABLE sales PARTITION RENAME SYS_P1122 to SALE_400012

  ALTER TABLE sale SET INTERVAL ();

  ALTER TABLE SPLIT PARTITION for sale

  SALE_400012 TO (TO_DATE('01/02/2020','DD/MM/YYYY')) IN

  (

  SALE_202001 PARTITION,

  SALE_400012 PARTITION

  );

  ALTER TABLE sale SET INTERVAL (NUMTOYMINTERVAL(1,'MONTH'))

  INSERT INTO sales

  (SALES_DATE, STORE_NUM, QTY_SOLD)

  values (to_date('31/12/4001','DD/,MM/YYYY'), 1, 10);

  This last INSERT statement above creates a NEW partition because the date (31/12/4001) is above the transition point.

  Looks like you want to move the transition point downwards. That is - you were using this year there date of 4000 as a 'catch all '.

  1. set the partitioning interval

  2 split that last partition into two NEW partitions (new names) by using a VALUE that is high enough to contain ALL the data you have in this last partition.

  3. remove the last partition - it should now be empty

  4. turn on range partitioning

  Now, any data that you insert above this NEW point of transition (the limit that you used for the new partition) it will create a new partition of the interval. Make sure the border is really an end of month, if that's what you want.

  If your data sample had this

  INSERT INTO sales

  (SALES_DATE, STORE_NUM, QTY_SOLD)

  values (to_date('05/10/2016','DD/,MM/YYYY'), 1, 10);

  INSERT INTO sales

  (SALES_DATE, STORE_NUM, QTY_SOLD)

  values (to_date('31/12/4000','DD/,MM/YYYY'), 1, 10);

  So for the step #2 above use split date 06/2016 so that the line above for 10/05/2106 goes to the new partition and 12/31/4000 stays in the old.

  Then, drag this old and lines in it (31/12/4000).

  You can NOT split the last partition if interval is always on because it is the last partition interval.

  And as long as you have given for 12/31/4000, you will get no new partitions unless you insert was more TOP than this.

  So if you want partitioning interval to activate again 06/2016 that higher data would be deleted and the score he falls.

  You have discovered only among "traps" with the help of partitioning of the interval. Oracle will happily create new partition needed to keep the data. If ANYONE, even accidentally, between a date as 12/31/4000 that nobody would ever know until the new data seem to DISAPPEAR for some use cases.

  This is because all data will start to enter this new partition ACCIDENTALLY created instead of a partition for the month, it's part.

  And, and you have discovered, you cannot split this partition directly.

  Delayed segment creation can allow you to pre-create the partitions ahead without actually affecting the segment for them until the first row is inserted.

  Interval partitioning will create the appropriate partitions but not if someone accidentally or intentionally, data will be a valuable capitalized in the table.

• Is it possible to delete all entries in the Eventvwr log?

  Separated from this thread.

  Is it possible to delete all entries in the Eventvwr log, so I can go back to that is the app is written in the Eventvwr log?

  By default, event viewer produced a considerable number of newspapers.

  The four elements of the menu in event viewer bar are file, Action, view and help.

  Clear a log only appears in the Action menu of drop-down menu if the cursor is placed in a newspaper that can be erased and a report in the list is not currently selected. So if it is placed on the option Windows logs clear a log is unavailable, while "subject of a report in a folder under five is not selected, the option clear a log is available."

  

  The three main Windows logs files are Application, security, and system. The default file for these logs size is 20, 480 KB, which is larger than necessary. A reasonable size is 2 048 KB. You can easily change the size immediately after clearing the log by using the scrollbar to the right of the maximum log size to change whatever size you choose. In the same time make sure that the box before overwriting is checked. All of your changes by clicking apply then OK. If you have not disabled the first newspaper the system prevents the selection of a maximum file size less than the size of the existing file.

  see that the app is written in the Eventvwr log?

  The system records the entries in the logs. The system monitors everything that happens. Individual applications do not write entries in the Event Viewer logs. It's the system that records the entries on startup applications, stop and crashing!

• Do independent myRIO after the user has defined guidelines

  Greetings,

  I have a labVIEW VI that I write instructions in a text file on the myRIO and then the myRIO executes these instructions.

  I have seen tutorials that start the myRIO as a standalone application. But I need only become independent once the user writes information in the text file.

  Currently the user written instructions, and then click send to myRIO running then all tasks, even if the USB is still attached. After the user sets the instuctions, when they click on the instructions for sending, a message should then say rather unplug the USB of myRIO (this could be set to 10 seconds or something), then the myRIO performs the tasks as a standalone application.

  My project is the starter kit OR using the myRIO. I write instructions in the text file then the robot performs the tasks. The user never interfere with tasks, that the robot made, so the instructions are only sent once.

  Please note that I have a face before poster, I don't know how these screens still work?

  Thanks in advance for your help.

  Hello

  What you have said I think exactly as you want to do is not quite possible but you should be able to achieve the same thing by doing something like the following:

  A start-up executable running on the myRIO would allow him to run separate to the computer. You could then open communication to the myRIO of a separate VI on the PC to send instructions, and then close the communication for you to unplug the myRIO

  These links may help with some other reading on the executables to start on real-time targets:

  http://zone.NI.com/reference/en-XX/help/370622N-01/lvrthowto/rt_building_rt_app/

  http://digital.NI.com/public.nsf/allkb/E2F8C8D4270CCC62862574440054E894?OpenDocument

  Best regards

• How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user?

  How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user? any example?

  Fjean wrote:
  What is the independent procedure/function?

  You can create stand-alone procedure to record messages even if the transaction is rolled back messages is stored in the table and are committed.

  Example of

  SQL> DECLARE
    2    PRAGMA AUTONOMOUS_TRANSACTION;
    3    emp_id NUMBER(6);
    4    amount NUMBER(6,2);
    5  BEGIN
    6    emp_id := 200;
    7    amount := 200;
    8    UPDATE employees SET salary = salary - amount WHERE employee_id = emp_id;
    9    COMMIT;
   10  END;
   11  /
  
  PL/SQL procedure successfully completed.
  
  ---log_error procedure
  -- Table Err_tab ( seq number , time_stamp date, message varchar2(4000))
  CREATE PROCEDURE log_error (p_message VARCHAR2)  AS
    PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
    INSERT INTO Err_Tab(seq.err_seq,SYSDATE,p_message) ;
    COMMIT;
  END log_error;
  /
  
  -- You can use this procedure to log
  -- error messages as follows in a transaction
  BEGIN
    log_error('Start emp update') ;
    UPDATE emp set
    log_error('End emp update');
  EXCEPTION WHEN OTHERS
    log_error('Update Error '||SQLERRM);
  ROLLBACK ;
  END ;
  /
  Even in case of Rollback error messages will be inserted to log table 
  

  SS

• Delete all orders of the user at the same time?

  Hello

  There is nothing in the code to delete all orders of the user at the same time? (by code or function)

  Get all enable them command user?

  Thank you

  Hello Oz,

  Call ScriptCmdReset()

  to return to the State of brand new tiara, which, in most cases, unload all global variables and commands that you have created by program since then.

  Brad Turpin

  Tiara Prodcut Support Engineer

  National Instruments

• Cannot delete file: cannot read the source file or disk

  When you try to delete a specific folder which shows on the list, I get a dialog box saying: error deleting file or folder... Cannot delete file: cannot read the source file or disk

  Is the path to the really long folder?

  Any file or folder has a space beginning or end?

  Click Start, run, type cmd , and press ENTER to open a command prompt. In the command prompt...

  For a file test

  DEL \\.\driveletter:\path\filename

  For a test folder

  RD \\.\:\\
   
  If this doesn't help not please let us know the full path (and the name of the file if it is a file).

  Tricky

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• Establish the VPN connection before the user logged

  Hello world!

  Anyone know if it is possible to run the cisco vpn client and establish the vpn connection before the user logs (Windows 7)? How?

  Thanks in advance!

  You must Anyconnect VPN.

  use start before logon feature you can get the VPN before windows logon.

  There are a lot of configuration guide that you can find in CISOC regarding anyconnect SBL.

• How to get the host name of the physical computer inside a virtual machine until the user logs in Windows?

  I don't know if this is the right place to post this question, I develop software to support VMWare PCoIP and need to know how to get the host name of the physical machine (which manages the virtual machine and View Client) within a virtual machine before the user logs in Windows of the virtual machine.

  I understand there are two ways to read the host name, via the HKEY_CURRENT_USER\Volatile Environment registry and environment variables, but they are available once the user is connected. I need info before the user connects.

  Is there a VMware API that can be called or asked the host name?

  Thank you.

  Not on the broker, but there are the startup scripts to log on to the computer virtual itself: http://pubs.vmware.com/view-52/topic/com.vmware.view.integration.doc/view_integration_startsession_script.9.2.html

  Note that these executed when a virtual desktop computer allocated connection, not to the point that the client connects - it is possible for the customer to not complete the connection (crash, cancel, network failure) and so any what solution you design must handle this.

  Mike

• Unable to connect even after the user password reset

  Hai all,
  
  10.2.0.3 on Linux
  
  Reset a user password and the user is unable to connect as you can see below
  
  
  [oracle@testdb 10.2.0] $ sqlplus sys/Manager as sysdba
  
  SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:21 2012
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
  With partitioning, OLAP and Data Mining options
  
  SQL > alter user sysman identified by oracle.
  
  Modified user.
  
  SQL > disconnected from Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
  With partitioning, OLAP and Data Mining options
  
  [oracle@testdb 10.2.0] $ sqlplus sysman/oracle
  
  SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:32 2012
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  
  Unable to connect even after the user password reset

  Check
  How to change the password of the database user Sysman (DB control repository schema) [ID 259379.1]
  EMCA 11 g fails with the error "ORA-01017: name of user and password invalid; connection refused"and" username/password invalid name; For DBSNMP or user SYSMAN"[ID 741530.1]

• My files disappear after the trial 30 of Acrobat Pro?

  My files disappear after the trial 30 of Acrobat Pro?

  Thank you

  Ed

  N ° you just can't use Acrobat on your computer more (unless you buy it,

  of course).

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• Prevent the user from printing and see some pages

  Here is the scenerio:

  The form has 4 pages.  I want only the user to see and know about page 1.

  I need to batch print the other 3 pages, each page in a separate batch

  Here is what I tried and the question resulting:

  1 format pages 2,3,4 as visible print only

  a. the user may say there are 3 other pages - they appear in white

  b. the user may see them if they decide to print

  2 format pages 2,3,4 as visible print only and restrict printing to the user

  a. I can't print without having to open each one with a password - works well with printing of lots per page

  3 format pages as hidden 2,3,4 - the user cannot tell or see the other 3 pages but:

  a. I can't print the pages

  3 format pages 2,3,4 as hidden and have the form submitted as xml and import them into the complete PDF

  a. There are fields that are changed dyamically based on the selection of the user (ie. selection of fonts), so that the xml import does not work for this

  Any ideas on how to "get my cake and eat it too."

  Hello

  You could try a hidden field that seeks the username «»

  There are security problems, and the script has to be in a position of trust. You can make this place a Javascript file inside the Acrobat folder. The penalty usually with trusted fuctions is that you must send to each user a copy of the js file and it should also put it in the appropriate folder.

  In your case is not a problem, because you only want the js file on your computer and do not need to distribute it to others.

  When you put the (downloaded) file in Acrobat / folder Javascript, Acrobat will load it automatically.

  

  In Acrobat, make sure that you have defined a 'name' in Edition / Preferences / Identity tab:

  

  When you open the PDF document, your user name will be on the field. This only happens if the js file is loaded in the correct folder on the computer that you are using.

  

  Once it's working, it's a simple step to include an if statement in the textfield, after the script located in the initialize event:

  If (this.rawValue == "lfalke") / / or whatever your username is set on...

  {

  Page2.presence = "visible";

  page3. Presence = "visible";

  page4. Presence = "visible";

  }

  on the other

  {

  Page2.presence = 'hidden ';

  page3. Presence = "hidden";

  page4. Presence = "hidden";

  }

  This means that the visibility of the three pages would be automatic. User with the js file AND your username could see pages 2-4, everyone would not see these pages.

  I know it's a little complicated, but once put in place it should continue to work OK.

  Hope that helps,

  Niall

• Error when opening file reader pen "the driver or network connection that the shortcut 'Target.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network is available, and then try again. »

  Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."

  OS:-xp sp2

  pen drive :-transcend

  earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).

  BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.

  my folders have files .doc, some do' report.unfortunately not have a backup of these files.

  target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN

  In the location target properties are even 4 all records

  Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls

  What exactly is...

  I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.

  ESET that worms have been Win32/AutoRun.VB.UG.Worm.

  now, I ve you gave details d, should know the problem I ve.i believe.help me

  Thank you for your time, but I did nt get the solution everywhere so formatted, it