StarForce - match - boiling Point

Similar Questions

• To reach my boiling point

  As long as the products themselves are great, the CC platform was nothing more than a nightmare of the day 1.

  It started w / the first set of updates that failed... always.  Solutions on this forum are anything but solutions as they referenced just install directions on the Adobe site or some ridiculous measures that made absolutely no sense as to why they are needed.  Randomly, one day, I clicked on update an app (it is part of a routine in the morning) and it worked.  Why?  WHO KNOWS!

  Fast forward to December, or so when the application manager CC said he got an update, she should apply.  "Oh good," I thought: "maybe this will fix problems of updating the applications."  Nope.  201 errors abound when you try to update the app handler.  Nowhere and I do mean anywhere, is there a reasonable solution approved by Adobe for this.  I can not even find a clear answer on what 201 is actually.

  About 30 minutes ago, I found a page on the Adobe site in which gave some possible 'solutions' to get operational.  After that the number 1 has failed, I went to number 2, which was to run the vacuum cleaner.  After conscientiously all operations and running the vacuum, I stayed with Adobe and applications not gone CC app Manager.  "Great!" I thought. «Maybe now I can install costs.»

  Nope.  201 errors continue to abound, and I'm here.  Waiting for a person to support for upward on the 24/7 chat and ranting here in the meantime.

  Secondly, I'm guessing my decision to purchase this for the moment.

  Johnfwright error 201 is a pretty unique error and does not occur very often.  201 error indicates an intermittent connection.  In specific download is paused and then resumed.  Unfortunately in this case when the download is not included because of a bad response.

  Did you use the steps listed in the error download and installation of the creative cloud application?  If Yes, what specific error messages locate you in download logs?  Do you have temporarily disabled the firewall software and hardware?

• How to match the edges of the objects precisely?

  Hi all

  Well, I have two objects A and B, both with very irregular, jagged edges. They must be contiguous and I want the edges to match exactly point by point, so when the border was off, the border of B will. A is to the left of B, A is the highest of B in the stacking order. I can do what I'm after following this procedure, but I hope that there is a faster and simpler method:

  Drag the right output edge so that it overlaps the left edge of B.

  Select A and B.

  Choose less back in the Pathfinder palette (I get my edge on the A, but B is deleted).

  Select and copy.

  Undo a step to obtain the return of b.

  Delete it has.

  Paste new A in place.

  Is there a better way?

  Thank you.

  Drag A so edge overlaps B. Select two A and B, Pathfinder > merge. Fact.

  Note: A and B must have different background colors, if they are of the same fill color, that they will be merged into a single object. As two distinct from the fill colors, they will continue to be two objects, but no area of overlap is deleted.

• Hearing: 'play '.  I said, ' no you're not, you liar!

  Need some help here.  I've read a ton of messages about all to the responsible material boiling point them.

  I pass on first hearing stuff.  Looks like it should.  I hit the room (or area) and the status at the bottom left wrote:

  "Play (rate resampling to match the device 44100 Hz sample)"

  
  But, CTI does not move and no sound.

  If I change my project will be 48000 Hz as I think he wants, then I get:

  'Play '.

  
  But nothing does not play or moves.

  As a side note, my audio works fine in first and any other program from Win7.

  What is happening on each computer, that I have tried.

  From your description, I guess you are trying to use the sound interface integrated on your computer... a Realtek or similar.

  Did you go to the Windows Sound Control Panel?  You get to this in either in Control Panel in the start menu or on multiple computers, on the right by clicking on the small speaker icon in the lower right of your screen.

  Once you get there, you should have a menu screen with tabs for playback and recording.

  On the playback screen, place the cursor in a blank white area of the sound screen and right click.  You should get a popup which included the lines "Show disconnected devices" and "Show disabled devices".  Put a checkmark beside each other so both options are enabled.

  Then on the left click on any device you want to use to listen to your stuff so it highlights.  Click on "Properties" then the "Advanced" tab  This will give you a screen where you can define what sample rate and bit depth to use.

  Now, on its main menu, click the recording tab.

  Repeat the steps above, allowing the display of the disabled and disconnected sources.  Then select the sound source you want to record and make the thing properties and advanced to set the depth of rate and little input sampling.

  Finally, go to the menu Edition/Preferences/Audio Hardware of the hearing and select the class of device, input/output and sample rate you want.

  If you ever have a similar problem again, go through the above again - it's Windows sometimes allows you to adjust your settings for you because he thinks he knows better what you need.  That's why SteveG hate Win7 for any serious audio use.

  Longer term, consider downloading and using ASIO4ALL instead of the Ms. updated... you'll have to read on the use of ASIO4ALL but solves a lot of problems for many people.

  In the longest long term, consider purchasing a basic USB with its own audio interface drivers ASIO so you can drop garbage Windows audio stuff out of the loop for good.

• Apple Watch unlock Mac does not

  I have a first generation of Apple Watch and a spring 2015 MacBook Pro, which I just installed Sierra. When I tried to enable to release the Mac with Apple Watch he didn't even after a number of tests, but eventually he agreed.

  Now, however, I believe that if I leave my MacBook for a few minutes and come back, it will say that the Apple Watch unlocks the Mac, the small waiting wheel goes around and around, but after maybe 8 or 9 seconds it drops just go back to the password entry screen. The net result is a considerable delay to return on the MacBook. After this happened a few times, I have disabled unlocking with the Apple Watch in the preferences.

  Any ideas why this happens? Normally, my iPhone is also nearby and the watch is associated with it - does make a difference?

  Do you have any Bluetooth device that is connected to your Mac? I had the same problems with the feature to unlock, then I noticed that the Bluetooth icon in the menu bar show he was matched (three points through the center of the symbol) even if I had nothing paired with my laptop. I open Bluetooth preferences and delete the two devices which are listed and which had been previously connected, but were not currently connected. After the removal of these items, the Bluetooth symbol returns to its normal look unpaired, and the release device started working 100%.

  I then tried to experiment a little. First of all, I have associated my Bose speakers. 100% failure, required my password every time. Then, I have not matched the speaker and paired with an Apple Magic mouse. This gave rise to a rate of 50% of failure but still worked when I clicked on cancel, then tried recording in. I have not tried any other devices or multiple as a mouse and a keyboard.

• How to add 'Frequent' "Jump List" section in FF 23.0.1?

  Looking to add pages in the right click menu of the FF icon. I would like to be able to change what appears in the "Frequent" part in particular.

  Several months ago there was a bug where Firefox 21 arrested in the jump list update. When I did the research at this time, I reached the following conclusions:

  (1) the section "Frequent" in the list of shortcuts matches high points listed by the 'Most visited' bookmark ('smart folder").

  (2) Firefox manages a binary data file in this folder (because it's a binary file, it can not easily be changed):

  %APPDATA%\Microsoft\Windows\Recent\CustomDestinations
  

  (My file is named 969252ce11249fdd.customDestinations - ms but yours may have a different name... not sure how these names are chosen)

  Therefore, I am not optimistic about the control of the selection of items in the section Frequent of the Jump list.

  You can add bookmarks to your list of Firefox shortcuts, but for names of control (by default, the URL is displayed), you must use a two step process:

  (1) bookmark drag on the desktop or another folder in Windows Explorer, rename as desired.

  (2) made drag drop on the pinned, then make Firefox icon right click to confirm that it has been added to the Favorites section.

  After that, you can delete the shortcut on the desktop.

• HP Officejet Pro 8000 - guard alignment page printing

  I had trouble with black ink print does not correctly so after several cleanings I decieded to manually clean the print head. I took the printhead of the printer then whipped cream, the part where the ink comes out with a most paper towle. After that I put the print head in the printer prints a print alignment page. Ok. Now, every time I have print whatever it is that the printer will be after the print job is printing another page of alignment. Is there a way to stop? Thanks for your help.

  Hello TheDeerSlayer,

  When you clean the print heads, you should try to not clean the part where ink is coming out of it (nozzles). It is very easy to damage them and if it happened, most likely the only way to solve the problem is to replace the print head. There are two things, you might try to see if you can get the print head working properly again: first thing is to clean the sensor that checks the nozzles. It is located on the right side of the printer at the bottom of the area in which the cart moves, it looks like a strip of metal which is only visible when the transport is located on the side more to the right of the printer. Be sure to use a cloth moistened with cold water. What you might try if this does not solve the problem and the nozzles are just clogged with ink and not really damaged, is to heat water (almost boiling point) and then soak the part of the printhead whith the nozzles in the water for some time. Let the printhead to dry and then install again and see if it works now.

  This picture is of you can location of the sensor that checks the print head nozzles. The image is not so great and is an another printer, but it is located in the same place on Officejet Pro 8000.

  

• No data on FIFO DMA transfer

  Hi all

  I'm under LabView 2013 and have updated all drivers and versions on my local computer and also on the Single Board RIO 9636 I use. My goal is to measure 4 similar entries corresponding to four different microphones and then each individual signal as an output wave form. I try this using the FIFO DMA 4.

  The problem that I am running is that I am not able to read data from the RT Microprocesssor VI using the FIFO 4. Reading methods. I'm relatively new to using a FPGA and labVIEW programming. I attach two diagrams for information purposes. I thank in advance for any help, you may be able to provide.

  mcoe12 wrote:

  What happens is that data from the FIFO are just 1 and the real are not the case of the incoming data.

  AH! If you said that in the first place, I have identified the problem in the first post. It seems that your data types do not match - fixed point for the FIFO DMA configuration does not match data from the analog input. That's what the small red "points of coercion" you are showing on writing of FIFO. My guess is that's why data is not properly through.

  While you edit digital representations, also change the sampling frequency is an integer, to match the input of the timer.

• HP Pavilion G6 2252so closing down due to the high heat (fan was cleaned up)

  I'm trying to fix a G6 model due to heat issues. The laptop is about 1 year. From what I have read on the internet, it is mainly due to the accumulation of dust. I told the owner that this was not covered by the warranty and offered to help with the cleaning of the fan. I completely cleaned the fan (incl. Remove the fan cover) and change the thermal paste on the processor. The problem persists. With the Speccy program, I read time of departure. for CPU to 90 degrees celsius. It's very different when the laptop shuts down. Sometimes it happends fast, at other times, he can run for hours. Even if the processor is completely cold, you can stop even before windows starts correctly. I managed to see the temperatures over 150 degrees celsius which should be alarming high. Even 90 degrees seems VERY high to me. The air blown by the fan seems not hot. It is only moderately hot and adjusts it fan speed according to the temperature. He begins to rise from more than 100 degrees. 90 to 99 degrees it runs pretty slow.

  If I try to go into the BIOS, I have only seconds before the closed laptop.

  From my point of view, he owes me two temperature sensors not working not properly, or the manipulation of temperature sensors is misinterperet, or simply the cooling system which is default. I don't know how the cooling system. The seat has a cobber lead wires for the heater and the fan. The tube contains a fluid? The liquid could somehow have vapourised?

  Be warm and helping the owner canceled its guarantee, now that I've had the dismantled oidissement?

  I tried to havn't updated the BIOS, because I'm afraid I'm going to brick the laptop, if it goes out during the process.

  Where is the temperature sensor placed on the Board? Is the sencot'en CPU built in or is it place in over/under it?

  How can I help the owner more far.

  Best regards

  Frank

  @FrankH82

  Hello again. I had actually read what you have written, but included these pages although I knew you did a large part of him he was already comprehensive, but also a reference to the point in case there was something on the picture in one of the documents that you may have missed, as a task to clean. I also realized that the BIOS update has been in the process as well, but guess you wouldn't do that, according to your previous statement, and that's understandable. I have not updated the BIOS, either when the PC has tendency to overheat and stop in the process (and brick it).

  In addition, there is the part about hardware failure analyses. From what you describe, it seems to me that the fan does not work as it should and is the likely source of the problem. If the unit is running too hot that you mention and the outgoing air flow is not so hot then there isn't enough air stream passes through. If instead it turns out to be a sensor problem, which is most likely going to require a replacement of the Commission.

  I have included the Service of Guide so that you can see how disassemble the unit safely if something had been missed in your household, and also, so you should have access to the parts list, if it turns out that the material is the source of the problem, since it includes the reference numbers for various sections that are replaceable by the customer including the fan and the heat sink (, motherboard, etc.) I have also included in part to answer your question on heat sensors that you request that are not listed as replaceable parts by the discreet.

  With respect to the copper pipes, they are units normally sealed with a small amount of distilled water inside at less than the normal pressure to reduce the boiling point of water, sort of way, it is meant to vaporize to help dissipate the heat. The only reason why the liquid inside would be gone is if the seal in the hose is damaged. If this is the case then it should be replaced.

  Now at this point, other than hardware problems as possible, as the system of cooling or the motherboard, which might need replacement, you can also look at the possibility of a cooling plate to increase the airflow. I myself for one of my laptops that I have left my son to use. He was very helpful while working in a warmer room in summer. It could be a quick thing to try so to make reliable unit until the likely hardware problem is resolved.

  Finally if you don't find that it is the material that needs to be replaced you should try calling the technical support to the 800-474-6836 line. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

• No color Deskjet 5700

  The child abandoned his 5700 (5740?) with me the other day - she is out of the unknown regions and will not need a printer for some time.

  I really don't need either, but wth, there were only three in the Office anyway and...

  No color...

  Black (test page) is fine.

  SOME of my printers (all HP) came with the utilities 'clean print heads"and other"sports. "  Nothing visible.  I don't have the auxiliary software that could go with this thing - Windows Vista found a driver that works otherwise.

  No idea what the status of the cartridge is - she has not used for some time, I'd be willing to bet, but the printer thinks it's OK, and little ink 'fees' came out when head cleaning.  (It might be blocked, of course.)

  Any thoughts?

  TIA

  Stu.

  Hello SMMAssociates,

  You can use the buttons on the printer to do this:

  To print a test page with, among other things, information on the cartridge: press and hold the Power button, press Cancel 1 time and release the power button.

  To clean the cartridges: hold down the Power button, press Cancel 2 times, take 1 hour and then release the power button.

  If on the print head nozzles are clogged with a dry ink and cleaning cartridges doesn't work, you might be able to fix it like this: heat water (almost to the boiling point) and then soak part of the cartridge where the ink comes out (print head) in the water for some time, to let the fine cartridge to dry and then install again in the printer and see if it works now.

• random horizontal lines IE11 W7

  Suddenly noticing random black and white horizontal lines on monitor while page to scroll upwards or downwards.

  They seem to match the points during which I stop scrolling, but sometimes completely block on the full screen with approximately 1/16 "model.

  haven't tried to refresh each page help

  tried to restart my HP graphics, helped for a while and then crept in the.

  Maybe a virus?

  Help!

  graphics of p.s. HP ENVY17 running ATI HD

  Hello

  Run the System File Checker

  http://support.Microsoft.com/kb/929833/en-GB

  Uninstall and reinstall the graphics driver

  1. click on Start and type Device Manager

  2. click on enter.

  4. click on display adapters

  5. click on driver list

  6. go to the Driver tab.

  7. Select Uninstall.

  Run Windows Update and then re-install again http://www.update.microsoft.com

  Settings reset Internet Explorer http://support.Microsoft.com/kb/923737/en-GB

  Thank you.

• Predownload Image update for the controller

  I have a question for someone who has experiece with predownload function.

  I'm trying to minimize my reboot of the WLC.
  Is it possible to download the AIR-WLC4400-K9-7-0-220-0.aes AND the AIR-WLC4400-K9-7-0-220-0-ER.aes for controller and restarting only once?

  {make changes according to the comment of Wesley. He's right

  No, you will need to restart after the installation of the daughter of ER. Do not install both files at the same time.

  You can install the file .aes on the controller of two first and then use the command of permutation and perform a simultaneous restart.

  1. install AIR-WLC-7-0-220, 0 aes on both controllers (not restart)

  2 see the boot (your new image is the main)

  Change here: boot Config backup (* this is necessary if we use the command swap)

  config 3 ap primary predownload image all the

  4 (cisco Controller) > system reset to 00:05:00 image swap reset-aps save-config //will reset the controller in 5 minutesand restart the APs so that they can come back with the new image

  More details are here:

  http://www.Cisco.com/en/us/customer/docs/wireless/controller/7.0MR1/configuration/guide/cg_managing_ctrlr.html#wp1177046

  Additional notes:

  The access point compares his running image with the image running on the controller. If the versions match, access point joins the controller.

  If the versions do not match, the access point compares the version of the backup image, and if they match, the access point swaps main and backup images and recharging and later joined the controller.

  Post edited by: Keyur Desai

• change the function of the button '2' and ' (single inverted coma) are reversed

  Separated from this thread.

  Hi, I'm having the same problem as the same person who above. I tried to change to English UK for English in the United States, but the problem is still there. I saw on another forum someone suggested to change the key sequence:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/the-inverted-comma-keys-are-reversed/e204b7aa-933F-44fe-8df9-30a5b0575084

  I tried changing my sequence of key not assigned on both sides, and yet I still facing the same problem. Hope you help me with this situation :/

  The language and keyboard are two separate settings.  Looks like you got the language passed correctly, so here's how to get the keyboard to match:

  1. Point to the right corner, drag from the right, or press Win + C to show the charms. But you open them, move forward one, click the spell research.
  2. Type set language and choose the result of 'language and region settings.
  3. Under languages, click on your language, and then click the Options button.
  4. Under keyboards, click Add a keyboard and add the United States keyboard layout.
  5. Delete the list UK keyboard layout.
  6. Quite.

• Need to change the color of a dark black blue file

  I need help in the conversion of a file of a blue color with an intense black. Black rich meaning 40 c, 30 m, 30y, 100 k in the darker areas and the rest of the file must have a neutral gray balance. It would be easy if it was just a solid background, but the file I provided has a star on the middle of it. I think it can be done with the mixer layers or hue/saturation, but my efforts have not produced the file exactly as required. This is a jpg of the attached file. Any help would be greatly appreciated.

  

  1 convert the file in Lab Mode and zero a and b channels to produce a monochromatic image without sacrificing the details.

  2. now convert to grayscale. It will look like this.

  

  Choose Edition > color settings > CMYK > customized, choose gray Componeent replacement (GCR) and change the black generation heavy. Note that now the Gray ramp shows curves similar to your goal.

  

  Now, choose Mode > Mode CMYK color to shades of gray in this change CMYK

  Go to curves, choose the darkest black area in the image, mark.

  The values would be present as follows in the Info Panel. Notice they are cries of aim you values remotely.

  

  Adjust the point on the curve in each of the CMYK channels to match your points of view, as shown below

  

  Note that we now have the values of your target and the image looks like this:

  

  Last return, use your black generation assigning one you normally.

  One final note: Although your screen might not reflect a difference, I suggest you talk about your lithographer values that you have chosen. They add up to 200% solid which you can choose to increase to an even richer black (if the paper supports all).

• ESX server 3i 3.5.0 raid failure

  Hi all

  I guess this has been asked before, but I see nothing that quite matches the point, that I am now.

  I was running from ESX willingly until this week, it seems that undergo a 3 discs on a Bay raid 5 3 everything all at the same time, I managed. The system would start and run for a while but would eventually fall. I copied all the data store of data through the client Infrastructure to a Workstation window, I'm not sure how to back these virtual machines on and running to a new installation of ESX, as it seems that when the copy of the files have been renamed? It seems not as simple as the copy of the stuff in the new data store.

  Concerning

  You can do it the same way that you have downloaded the files. Open the browser of data store, create a new folder with the name of the virtual machine and download the files in this folder. Once downloaded, right-click on the vmx file and select Add to the inventory.

  André